Age | Commit message (Collapse) | Author | Files | Lines |
|
nonexistent elements
If we are testing for an index whose membership bitmask happens to sit in LSB of uword,
and there is nothing else set in that uword in the member bitmask, the shortcut path
returning the valid index is taken even if the element with a given index doesn't
exist in the sparse vector. This happens because the count of leading zeroes on the
value of 0 is zero, which is equal to the value taken modulo bitsize uword.
Take care of that case.
Also add unittests showing the problem and verifying that sparse_vec_index2 does not
have the same issue.
Change-Id: I19117e13817c3e5de579b9250bb741de42491985
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Device speed capability should be specified based on different phy types
instead of a fixed value, this patch fix the issue.
Change-Id: Ia76231aefbcb0fe8370867b6e86a0d3bb9e169a0
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
|
|
Add function vlib_buffer_clone_at_offset() so that the cloned
packets' 1st buffer will have the original packet header copied
at the specified offset (instead of current_data). This can be
used to increase headroom in the cloned packet to allow large
header encaps in case the stdandard 128B predata is not enough.
The original vlib_buffer_clone() still works the same as before.
Change-Id: I3b50c8ad7e3952568bc141710567c99a3dacddce
Signed-off-by: John Lo <loj@cisco.com>
|
|
Change-Id: I52198e97397bb6f3b5c0c30c44aac34c17650d4d
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: Ic2a61c45face18b6dd23d5509d75367d3b2441e9
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Previously, all frames were put for next node on the main thread,
even if the execution was happening on a worker thread.
Also, refactor to use API function vnet_get_main()
Change-Id: Ibefb1b3871563a78aa30352a37b9216537e15bf7
Signed-off-by: Igor Mikhailov (imichail) <imichail@cisco.com>
|
|
Change-Id: Ia88c7228a46e251b8a7815240da6ddbbcde08bc7
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Drop the session reader lock across vlib_process_suspend(...) calls.
Fix the debug CLI command.
Change-Id: Ic0266dda1fdfa90971f2cb935248941317c01205
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
We dont't want git pull there, there is simple way to grab tarball
from github for every single commit
Change-Id: I7a98cab7660750e48084279d8b9892cdf229bceb
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Icdcbac7453baa837a9c0c4a2401dff4a6aa6cba0
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
test/vpp_l2.py:213:26: F821 undefined name 'L2_VTR_OP'
self.itf.set_vtr(L2_VTR_OP.L2_DISABLED)
Move L2_VTR_OP enum to vpp_sub_interface.py where the VTR code is found.
Change-Id: I9eb9a3a2c679813c221ce1d0c4fa8aac6076c443
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Change-Id: I455d108dfe52d45d040167fecb37b33e9d630c3c
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Move __str__ to super for all subclasses of VppObject
Implement __repr__ in VppObject
Implement __hash__ and __eq__
Change-Id: Ibd4ea37b84b17f499ab86630fb5b9ed9c8b4b1c2
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Currently supports on single stream exposed through standard internal APIs
Based on libquicly & picotls by h2o
Change-Id: I7bc1ec0e399d1fb02bfd1da91aa7410076d08d14
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Change-Id: Iff61904804d8218c4e02897521368f696002343d
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Idc1e1747035638777240b7ea9afcf675b22be7f1
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I1b041edb6f20a9f9c867fb243922985398485054
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: Icf83c876d0880d1872b84e0a3d34be654b76149f
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I63741a22bc82f5f861e1c0f26a93b5569cc52061
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: If6c672d1caa8884eb5d819311606a79a3de81200
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
When configuring a DHCP client, both the UDP ports for DHCP client
and server are registered. Packets to the server port end up being
dropped unless you have also configured a DHCP proxy.
This breaks a common home/office gateway use case where the WAN
interface gets configured using a DHCP client and devices attached
to a LAN interface attempt to configure themselves using DHCP. If
you try to punt to an external DHCP daemon to handle the LAN client
requests, the packets never make it to the external daemon because
of the server port being registered.
Modify dhcp_maybe_register_udp_ports() to accept a parameter that
controls which ports get registered. For a DHCP client, only the
client port is registered. For a DHCP proxy, both client and server
ports are registered.
Change-Id: I2182d9827e4c7424b03ebb94952c3d2dc37abdb6
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Change-Id: I0b8a311979d3ccd15f3854e7ac44ca9951dc6ce4
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Ic6244511b88bdd42756f74e3163a70b8014e8547
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I2018d8367bb010e1ab30d9c7c23d9501fc38a2e5
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Ib828ea5106f3ae280e4ce233f2462dee363580b7
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I0b996460e05c40e74766563fb2a94c62a65063ce
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
A punt/exception path that provides:
1) clients that use the infra
2) clients can create punt reasons
3) clients can register to recieve packets that are punted
for a given reason to be sent to the desired node.
4) nodes which punt packets fill in the {reason,protocol} of the
buffere (in the meta-data) and send to the new node "punt-dispatch"
5) punt-dispatch sends packets to the registered nodes or drops
Change-Id: Ia4f144337f1387cbe585b4f375d0842aefffcde5
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Ib73352d6be26d639a7f9d47ca0570a1248bff04a
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I4a119937842eb188f5e5a7706cbe70e91ae4def8
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
RDMA ibverb is a userspace API to efficiently rx/tx packets. This is an
initial, unoptimized driver targeting Mellanox cards.
Next steps should include batching, multiqueue and additional cards.
Change-Id: I0309c7a543f75f2f9317eaf63ca502ac7a093ef9
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Change-Id: I1919d3844936486f04f2bfde24dc7e0d9121927a
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Id4a8b6a31fc3e88af2f075cb97c85d3f9b738d9e
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I561fd187b4865345f3bff86b3d6e67b0f0e97557
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I86e71f32dee3cc48f680e6432a96caef0a7f66a1
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I4d3ba18ab5205317219989de55b6e50d3b1d8a79
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Iec7da9adc970d005cd7d3d42839b5e51b0b5f5c3
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
vpp/src/vat/main.c
When change the window size,the vat will get the SIGWINCH signal and then exit.
It is not a exit action,so we can ignore it.
Change-Id: If796762216910e23cace09406d413331f505d990
Signed-off-by: ezkexma <maqi.z.ke@ericsson.com>
|
|
Disabled by default. To kick the the tires:
wget https://github.com/linuxdeploy/linuxdeploy/releases/download/continuous/linuxdeploy-x86_64.AppImage
sudo mv linuxdeploy-x86_64.AppImage /usr/local/bin/linuxdeploy
sudo chmod +x linuxdeploy-x86_64.AppImage
Enable VPP_BUILD_APPIMAGE e.g. in ccmake
make build | make build-release
The vpp AppImage lands in .../install-xxx-native/VPP-x86_64.AppImage. To run it:
./VPP-x86_64.AppImage vpp unix interactive
To run it (as root) and inhale the usual startup.conf:
sudo ./VPP-x86_64.AppImage \${HERE}/bin/vpp -c \${HERE}/etc/vpp/startup.conf
To run vppctl, or any of the usual vpp binaries:
./VPP-x86_64.AppImage vppctl [etc]
Change-Id: Ide8cf4658cbb56f1d36a1ce7fc8f7338f8d38278
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: I6527e3fd8bbbca2d5f728621fc66b3856b39d505
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I53ab8d17914e6563110354e4052109ac02bf8f3b
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Without this patch, the hook module raises a ValueError
when tests are run using python3. This patch updates the
exception being caught by ipaddress to ValueError.
Change-Id: I5e11e292a05ddf350fc04ebaf19cfd7dad2bd9d0
Signed-off-by: Naveen Joy <najoy@cisco.com>
|
|
Change-Id: Ib0249aec00c8a8306f2cf25394d39b4b7850d8f7
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I4d73b712da911588d511a8401b73cdc3c66346fe
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I81ecdf9fdcfcb017117b47dc031f93208e004d7c
Signed-off-by: Damjan Marion <damarion@cisco.com>
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Ie7be0136c182cdc35193e47dd3249153c2f8d65e
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Ie93f3a2107df0452f7a7436b78c337f482904899
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Change-Id: I4e1cde754eb4d6406cd6cd51f37d89552bdb6a53
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Ic6455a930fcb21b055bcf093359bc8328f88140a
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Fresh OpenSUSE Leap 15.0 containers are missing build dependencies.
Change-Id: I9b62f36c658862d8f32db5547d2176e6f56df4ea
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
this can be used by e.g. tunnels so it doesn't need to be
implemented for each tunnel type.
Change-Id: I0790f89aa49f83421612b35108cce67693285999
Signed-off-by: Neale Ranns <nranns@cisco.com>
|