summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2017-09-28cdp/lldp: punt for no bufferSteven2-0/+6
When making a call to vlib_packet_template_get_packet(), it is possible to get back a NULL if the system runs out of buffer. This can happen when there is buffer leaks. But don't crash just because we run out of buffers, just punt. Change-Id: Ie90ea41f3dda6e583d48959cbd18ff124158d7f8 Signed-off-by: Steven <sluong@cisco.com>
2017-09-28C++ API: remove deprecated throw listsKlement Sekera1-8/+4
Change-Id: Ia58664438c9dc949884a794bd123555a13a02e6c Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-09-28drop python3 dependencyKlement Sekera4-29/+26
Change-Id: I99c2c1d0d5b96f33efdb58dd3a2897a752e65349 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-09-27Update package versionFlorin Coras1-1/+1
Change-Id: Ic9bc303b65c95a0e06f90c75b067056b0b11e654 Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-09-28General documentation updatesChris Luke16-83/+117
- We now have several developer-focused docs, so create an index page for them. - Rework several docs to fit into the index structure. - Experiment with code highlighting; tweak the CSS slightly to make it slightly nicer to look at. Change-Id: I4185a18f84fa0764745ca7a3148276064a3155c6 Signed-off-by: Chris Luke <chrisy@flirble.org>
2017-09-28tun/tap: Bad packets sent to kernel via tun/tap interfaceSteven2-22/+29
It was observed that under heavy traffic, VPP accidentally sent traffic with the wrong source and destination to the tun/tap interface. Traffic appears to be sent to the wrong direction. This problem is only seen when worker thread is configured. When worker thread is used, TX and RX may reside in different core. Yet both TX and RX threads are sharing the same global variable, namely iovecs without any mutex or memory barrier protection. This creates a race condition when heavy traffic is blasted to VPP, like 1000 pps. We could create a mutex or memory barrier to ensure atomic memory access. But why bother? It is a lot cheaper to just decouple the iovecs such that TX and RX have their own iovecs. Change-Id: I86a5a19bd8de54d54f32e1f0845bae6a81bbf686 Signed-off-by: Steven <sluong@cisco.com>
2017-09-27VPP-990 remove registered handler if control ping failsv18.01-rc0Matej Perina3-0/+14
Change-Id: I5ca5763f0dc0a73cc6f014b855426b7ac180f356 Signed-off-by: Matej Perina <mperina@cisco.com>
2017-09-27LISP: add API handlers for set/get transport protocolFilip Tehlar4-0/+194
Change-Id: Ib675164c475edcdbe3013df7b847adf5e050c53f Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2017-09-27VLAN support on host(af-packet) interface.Akshaya N1-3/+26
On host interface if a VLAN tagged packet is received, linux kernel removes the VLAN header from packet byte stream and adds metadata in tpacket2_hdr. This patch explicitely checks for the presense of VLAN metadata and adds it in VPP packet. Change-Id: I0ba35c1e98dbc008ce18d032f22f2717d610c1aa Signed-off-by: Akshaya N <akshaya@rtbrick.com>
2017-09-27Update vagrant centos config to CentOS 7.4Dave Wallace3-2/+9
Change-Id: I45c1227b53ba9e57b94f1bc68de939cd3ce9d619 Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2017-09-27Fix: unnecesary uio binding for Mellanox NICSteve Shin1-1/+3
UIO binding is not required for Mellanox NIC and calling vlib_pci_bind_to_uio() should be skipped. Change-Id: I10ea457bc3c8d4be8117dec51d5bd940ee416a44 Signed-off-by: Steve Shin <jonshin@cisco.com>
2017-09-27Various fixes for issues found by Coverity (VPP-972)Chris Luke5-3/+25
174267: Revisit this string termination issue 174816: Add check for NULL when trace is enabled 177211: Add notation that mutex is not required here 177117: Added check for log2_page_size == 0 and returns an error if so 163697,163698: Added missing sw_if_index validation Change-Id: I5a76fcf6505c785bfb3269e353360031c6a0fd0f Signed-off-by: Chris Luke <chrisy@flirble.org>
2017-09-27acl-plugin: take 2 at VPP-991 fix, this time with a test case which verifies it.Andrew Yourtchenko3-3/+42
The replacement of [] with pool_elt_at_index and subsequent fixing it was incorrect - it was equivalent to &[], since it returns a pointer to the element. I've added VPP-993 previously to create a testcase, so this commit partially fulfills that one as well. Change-Id: I5b15e3ce48316f0429232aacf885e8f7c63d9522 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2017-09-27make test: clean ext binaries when doing test-wipeKlement Sekera1-0/+1
Change-Id: I9f5212ee670ea91c6b35f1406c256d0687b9c6b5 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-09-27Update CSIT tests 1700906 -> 170926Jan Gelety1-1/+1
- update of CSIT operational branch to be used for VPP-patch test Change-Id: If582dc7c5e37bd3cda7ba4858e98fc504e2b7b1e Signed-off-by: Jan Gelety <jgelety@cisco.com>
2017-09-26Fix SUSE dependencies to contemplate both python and python3 scripts.Marco Varlese1-1/+1
Change-Id: Ib677955448833dfeb1291490340f5ea1e417213b Signed-off-by: Marco Varlese <marco.varlese@suse.com>
2017-09-26tcp: update snd_nxt after congestion recoveryFlorin Coras2-9/+7
Change-Id: I2cf4c4850b9c3c093a7dce0cec89b9f710f69393 Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-09-26Add thread-safe event signaller, use RPC where requiredDave Barach5-5/+73
Update ping code to use the new function Change-Id: Ieb753b23f8402cbe5667c22747896784c8ece937 Signed-off-by: Florin Coras <fcoras@cisco.com> Signed-off-by: Dave Barach <dave@barachs.net>
2017-09-26checkstyle: ignore old clang-format (centos)Klement Sekera1-2/+9
Change-Id: Iecf35bd9fd760856e32eb1c0c9542ffbed472379 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-09-26make test: don't recompile ext if not neededKlement Sekera1-4/+4
Skip recompilation of test binaries from test/ext if these are up-to-date. This speeds up repeated test runs. Change-Id: I96dbfafc372398e3d858d8419219ef35c47bd0f3 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-09-26jvpp: lowering verbosity level for jvpp testsMatej Perina2-56/+55
Change-Id: Ie38dad209cce6d546379b4a5e449b34fbcadf171 Signed-off-by: Matej Perina <mperina@cisco.com>
2017-09-26NAT: remove worker_by_in lookup hash table (VPP-992)Matus Fabian4-97/+30
Change-Id: I3873d3e411bf93cac82e73a0b8e3b22563aaf217 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2017-09-26acl-plugin: test: move the API calls to vpp_papi_provider.pyAndrew Yourtchenko4-152/+79
Change-Id: I1d3818027b8a1fcb1ec12016e3476b5c22a2d5a5 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2017-09-26Memory overwritten when using unformat %u (VPP-987)Aequitas3-19/+19
Change-Id: I7d8f807fb502d61688aa1dee25fa4edcbeb32f41 Signed-off-by: Aequitas <wang.junqi@zte.com.cn>
2017-09-25Fix Ubuntu java dependency regression.Dave Wallace1-0/+1
- introduced by e6f3b467 "Fix for ssl dependency on debian 9" Change-Id: If41e517b2a55d2028ade6671f407831cfcf205c4 Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2017-09-25Vagrant fails if Vagrantfile is a symlink on Windows 10.Dave Wallace4-117/+131
- Revert Vagrantfile symlink to the default - Update README and env.sh Change-Id: Ib1a557b897e0217b162c31118a4c265769dd1760 Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2017-09-25Refactor multi-host socket_test.sh for bare-metal.Dave Wallace2-18/+51
Change-Id: I4fcde6652e0c66315a453250c6e02cd32176833d Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2017-09-25tcp: do not sample rtt for retransmitted segmentsFlorin Coras3-81/+100
Change-Id: I365c31607332a944ef498369881332b515894ed7 Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-09-25acl-plugin: use vec_elt_at_index rather than pool_elt_at_index to access ↵Andrew Yourtchenko1-2/+2
vector elements bb7f0f644 aimed to fix the coverity issue has incorrectly replaced the previous [] access with pool_elt_at_index(), for an element of a vector, with predictably interesting result. VPP-991 has uncovered the issue. Change-Id: Ifd3fb70332d3fdd1c4ff8570372f394913f7b6c8 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2017-09-25Fix usage string for vatJerome Tollet1-1/+2
Change-Id: Idad65cbb3765500a66f1097126076a2c5fdb4f1b Signed-off-by: Jerome Tollet <jtollet@cisco.com>
2017-09-25Fix sending GARP/NA on Bonded Interface Active/Backup Link Up/DownJohn Lo5-72/+101
For bonded interface in Active/Backup mode (mode 1), we need to send a GARP/NA packet, if IP address is present, on slave link state change to up or down to help with route convergence. The callback from DPDK happens in a separate thread so we need to make sure RPC call is used to signal the send_garp_na process in the main thread. Also need to fix DPDK polling so the slave links are not polled. Change-Id: If5fd8ea2d28c54dd28726ac403ad366386ce9651 Signed-off-by: John Lo <loj@cisco.com>
2017-09-25Add binary API documentationDave Barach4-71/+475
Change-Id: Id1a5da12b13d87bacfa81094f471b95db40c39be Signed-off-by: Dave Barach <dave@barachs.net>
2017-09-25NAT: session number limitation to avoid running out of memory crash (VPP-984)Matus Fabian4-38/+120
Change-Id: I7f18f8c4ba609d96950dc1f833feb967d4a099b7 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2017-09-23libmemif: Jumbo frames data/buffer length fixJakub Grajciar2-83/+195
Change-Id: Icadf1c28b4ab712a210a8e037200ab29d6c53fe4 Signed-off-by: Jakub Grajciar <grajciar.jakub@gmail.com>
2017-09-22openSUSE build fixMarco Varlese2-4/+6
* Fixed package dependency * Fixed bash unary operation error Change-Id: I782dda8ffd807931241fa6034c110f5fedbeca8e Signed-off-by: Marco Varlese <marco.varlese@suse.com>
2017-09-22Fix vpp "unix interactive" when running under emacs + gdbDave Barach1-3/+8
In this specific corner-case setup, ioctl (0, TIOCGWINSZ) returns window height = 0 and width = 0. Rather than declaring the terminal to be non-interactive, set the window size parameters to 80 x 24. Change-Id: If66f5f0883f1940518ec1c6e26228c9bb6f32852 Signed-off-by: Dave Barach <dave@barachs.net>
2017-09-22vhost-user: fix link-up statusYoann Desmouceaux1-1/+1
When changing the admin state of a vhost-user interface, do not put it in link-up mode if the interface is not actually ready. Change-Id: Idbc631a7126efa79d199909f9e7656d21bd412ca Signed-off-by: Yoann Desmouceaux <ydesmouc@cisco.com>
2017-09-22acl-plugin: remove the clib_warning "ACL enabling..."Andrew Yourtchenko1-4/+0
It was useful for debugging once upon a time... but time to say goodbye to it... Also remove the warning printed when sending ACL details. Change-Id: I43b2537e176556831eb7ff34b25c9068aa05ee27 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2017-09-22IP-MAC,ND:wildcard events,fix sending multiple eventsEyal Bari8-103/+288
wildcard ND events publisher was sending the last event mutiple times Change-Id: I6c30f2de03fa825e79df9005a3cfaaf68ff7ea2f Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-09-21vppctl,cli: Improve non-interactive vppctl (VPP-944)Chris Luke2-89/+404
Short version: Make vppctl behave as expected when run from scripts, or without a controlling terminal, and especially when using it with VPP commands on its command line ("non-interactively"). In particular, prevent the welcome banner and VPP CLI prompt from being sent by VPP when being used in these ways. vppctl ------ - Improve vppctl's detection of non-interactive sessions. - Pass non-interactiveness in the terminal type telnet option as a value distinct from "dumb" (which means non-ANSI capable.) - Make tty setup handling more robust. - Only send non-interactive command once we've sent the terminal type, to ensure correct event sequence; we need the VPP cli session to be in line-by-line mode. - Ignore stdin when it looks something like /dev/null. - Skip NUL bytes received from VPP. VPP CLI ------- - Detect "non-interactive" terminal types and set session parameters accordingly. - Add an "interactive" flag that controls whether the welcome banner and CLI prompt are sent. - Detect if telnet options processing switched us into line mode and act accordingly for the rest of the current input buffer. This was causing the command string to be echoed by the CLI editor code. - For non-interactive sessions, send a NUL byte after the input buffer has been processed. This is because vppctl depends on seeing traffic before it will try to close the session; a command with no output would cause it to hang. NUL bytes are ignored by all decent terminals, but we have vppctl strip them out anyway. - Prevent certain commands from running in non-interactive sessions since they manipulate interactive-related features. - For interactive sessions, quench the prompt that prints on VPP shutdown. - Detect and handle socket errors in the CLI; sessions were leaking. - Pevent SIGPIPE from ever being raised; handle EPIPE instead. We don't need VPP to die just because a socket closed just before we try to write to it! - Add a command to dump a list of current CLI sessions; mostly this was to detect session leakage, but it may have some general utility. Change-Id: Ia147da013317180882c1d967b18eefb8519a55fb Signed-off-by: Chris Luke <chrisy@flirble.org>
2017-09-21NAT: remove worker_by_out lookup hash table (VPP-989)Matus Fabian3-133/+120
Change-Id: Ibcd2cf22348ae5a72770a8f8ad25cbe8df7fd390 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2017-09-21Fix for ssl dependency on debian 9Anton Ivanov1-2/+7
Change-Id: I32f46c5a6f0e43e7f3e38b05d9607d43faf41501 Signed-off-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
2017-09-21Unpack into temporary directory with longer name.Thomas F Herbert1-2/+10
JIRA VPP-498 This commit is a fix so downstream builds in Centos and RHEL mock environment will work. This is a workaround for a bug in the debugedit code in rpm-build package 4.13 and earlier. Change-Id: Ia6361f7487c5afe9948a2d2fe929942ba5b9c0f1 Signed-off-by: Thomas F Herbert <therbert@redhat.com>
2017-09-20session: store tep port in net orderFlorin Coras4-14/+14
Change-Id: Ie3a99f09f44ec081d9b88a213bdb8d987fb462de Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-09-20Improve API message handler re-registration checkDave Barach1-3/+5
Change-Id: Iedcea2fb45052852666b91a21eed011f5593313d Signed-off-by: Dave Barach <dave@barachs.net>
2017-09-20LISP: add debug cli for neighbor discoveryFilip Tehlar4-6/+71
Change-Id: Ib5d335d6130617d6135615c6c8fa8deaac971331 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2017-09-20CLI: fix segfault when browsing an empty historyYoann Desmouceaux1-3/+1
When one starts VPP, types a command, presses up rather than enter, then types a new command, unix_cli_line_process_one() segfaults. This is due to cf->cursor not being reset upon pressing up if the history is empty. Change-Id: Ie503f20a9cb551e735abb8b0f4feb8c0006d2b61 Signed-off-by: Yoann Desmouceaux <ydesmouc@cisco.com>
2017-09-20TCP: fix "tcp src-address" command with IPv6Yoann Desmouceaux1-1/+1
When given a single IPv6 address, the "tcp src-address" command incorrectly infers the end of the range by copying sizeof(ip4_address_t) bytes from the given address. Change-Id: I100d5c6674d3a3980b8c018588988bdd32ff7269 Signed-off-by: Yoann Desmouceaux <ydesmouc@cisco.com>
2017-09-20tcp: add option to punt trafficPierre Pfister5-30/+99
Until now, if the stack didn't find a connection for a packet, it sent back a reset. With the punt option enabled, packets are now enqueued to error-punt where they can be handed off to the host os. Change-Id: I12dea8694b8bd24c92b0d601412928aa7b8046cb Signed-off-by: Florin Coras <fcoras@cisco.com> Signed-off-by: Pierre Pfister <ppfister@cisco.com>
2017-09-20Use openssl 1.0 compat RPM for Fedora 26 and newer.Thomas F Herbert2-2/+7
This is just a workaround until VPP is compatible with OpenSSL 1.1. JIRA: VPP-569 Change-Id: I8d2a113dc9400fd7e8e6850de5d91f40380455ce Signed-off-by: Thomas F Herbert <therbert@redhat.com>