Age | Commit message (Collapse) | Author | Files | Lines |
|
Migrate memif to use vnet device infra APIs. No new function is added.
Change-Id: I70e440d2ae1e673876365041f31fe78997aceecf
Signed-off-by: Steven <sluong@cisco.com>
|
|
Change-Id: Ib390164abb07ca0d38fd49e7e2e6b4e9ea856405
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Added support to the af_packet device to change the MTU size.
Change-Id: I9c9e1e17323721f3efccf70a10b753e12eef94d5
Signed-off-by: Ray Kinsella <ray.kinsella@intel.com>
|
|
Change-Id: I9a46125e3cf9815c08cf8cca17713ec6e9121eae
Signed-off-by: Marek Gradzki <mgradzki@cisco.com>
(cherry picked from commit 307cfd8eb14ff7df04316ffa56f2c2481d650d7e)
|
|
Change-Id: I83a1b02a73fd159f14cca04fed3993f571475a00
Signed-off-by: Dave Barach <dbarach@cisco.com>
|
|
Change-Id: I87495d95dc6c5a36ff6d2ae05203e22e43403bf6
Signed-off-by: Jon Loeliger <jdl@netgate.com>
|
|
For platforms which do not support u8x32, such as aarch64,
add an alternative implementation of 'dpdk_buffer_init_from_template'.
Change-Id: Ia7e8d0a5985fa5925e063ed6e890208c73e39933
Signed-off-by: Christophe Fontaine <christophe.fontaine@enea.com>
|
|
Change-Id: I417dfeba902ca8c3a080773942d4d2ce4335a9c1
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
Change-Id: I8b636ff57b6e6c3f4cfd2d77d930524559046dd9
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
The api specification had u8 as data type, which caused the python
binding to fail.
Fixes VPP-642
Change-Id: I9ba97959740d44c8f4a12db9356d0d1bcd709a73
Signed-off-by: Aloys Augustin <aloys.augustin@polytechnique.org>
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Change-Id: Ia91c3e8cb27b9e4c1cccefc0a4857dd9995450ab
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
This patch is causing DPDK to provide bad MAC address
for legacy virtio interfaces.
Change-Id: I526cd35a38164ede80a8ab6decb9e0d1ebfad723
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
This should avoid random crashes due to reception of packets (multicast
in particular) before ip6 addresses are configured on the interfaces.
Change-Id: Ibcf1a5a2ae2fa75f8b57da1b2f09f32c081210d7
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I19744387859129c6b8dc104041af158bf5f1d988
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Ieb0c1e690d6ae082cfedb276252a31fab480e561
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Ibd7828b1e1c699630ff450122d8aa317b1c9da26
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
using the SOURCE_DATE_EPOCH env var
to make vpp package builds reproducible.
See https://reproducible-builds.org/ for why this is good
and https://reproducible-builds.org/specs/source-date-epoch/
for the definition of this variable.
Change-Id: Iae0935c9bb4ccdfdb65600be543945a88f2e137f
Signed-off-by: Bernhard M. Wiedemann <bwiedemann@suse.de>
|
|
Interfaces with error state are not allowed to go admin up
Change-Id: I09fc09a5b28130aead219dccbc2e0f30ea7414cf
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I82c663bc0866c6c68ba354104b0bb059387f4b9d
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Iec1f739fe24c722d0db6c10cc81b5e8333067ea1
Signed-off-by: Dave Barach <dbarach@cisco.com>
|
|
- Add missing src dir.
- Exclude 'src/examples' from siphon processing so that example cli commands
don't end up in user documentation.
Change-Id: I46a6ad759fa8220d305b007a9506956365fc79bd
Signed-off-by: Chris Luke <chrisy@flirble.org>
|
|
Change-Id: If864182ec656cc6c6353be642e22910a4fc89870
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
32-bit code still can use crc32c instructions, but it operates
on 32 registers
Change-Id: I9bb6b0b59635d6ea6a753584676ebcf59c8f6584
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
- Adds VirtualFucntionEthernet for VFs
- Enables MLX4 driver
Change-Id: I163300e68edbe033227f641bdfcfe5918cbe58cf
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
For downstream consumption is important to have a way to specify the date or
the user or the hostname to particular values so to have reproducible builds
and/or packages.
Change-Id: I134288662b6cfbbe26bba7d8bc6be8511b34360c
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
- When the interface rx-mode is changed via CLI, the corresponding device
may want to know about it and to reset the driver. This patch is to add
the callback.
- In the function vnet_hw_interface_set_rx_mode, it appears it is missing
a line
hw->rx_mode_by_queue[queue_id] = mode
because the function is checking if the new mode is the same as
hw->rx_mode_by_queue which is initialized to POLLING. So if the function is
called to change the mode to interrupt, it just returns without doing
anything. This is the check that I am talking about in the same function.
if (hw->rx_mode_by_queue[queue_id] == mode)
return 0;
Change-Id: Iaca2651c43e0ae3fda6fd8dc128e247b0851cc65
Signed-off-by: Steven <sluong@cisco.com>
|
|
Move API source code from snat.c to snat_api.c
Change-Id: I1c4439eb5d2e3f43695ecc4d300eccd148105c15
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Example for u32x4 case:
Old code generates 2 instructions:
vmovd %edi,%xmm0
vpunpckldq %xmm0,%xmm0,%xmm0
vpunpcklqdq %xmm0,%xmm0,%xmm0
New code uses only one instruction:
mov %edi,-0x4(%rsp)
vbroadcastss -0x4(%rsp),%xmm0
Change-Id: I989dc3025f5fe3f6c880972389ded11f31e2f3f6
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Ica634536387d1196366ec96c52770287fcab0768
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Visit http://<vpp-ip>/show/interface or similar.
Change-Id: I076b4661cf19d1b94bb01efdadb5849446be915e
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: I01650b3b10b79ec549be0d5eceb0e318c06fcb50
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Produce vpp_papi*.egg so that virtual environments (e.g. virtualenv)
could install vpp_papi inside them.
Change-Id: I9664d119a64f4968de44a7a430aec4879ed02b16
Signed-off-by: Igor Mikhailov (imichail) <imichail@cisco.com>
|
|
wildcard produces empty paths when 'make test' is run
from a clean tree: install-<tag>-native directories
don't exist yet.
Change-Id: I3b3bbd86cf7eda18f2c698f85b834f82b1a19065
Signed-off-by: Igor Mikhailov (imichail) <imichail@cisco.com>
|
|
Change-Id: I0fec86914ec027383ff511b7092beac2363f55f7
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I9664214652229b663c3e3ba7406b4ede96bfb123
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I8c9f886cb95e92adbe1c646844789ca0a6bb6140
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Specifically, the ACL plugin needed format_ip6_address()
and the ip46 variant as well.
Change-Id: Iec35b8acd4cab4bcbc73053dcca2ee91bd9c72cd
Signed-off-by: Jon Loeliger <jdl@netgate.com>
|
|
Change-Id: I01c6e3dc3a1b2785df37bb66b19c4b5cbb8f3211
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I1decca6fb5ce6de74ccbcd5a262ebd3db6f55cdc
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I739bed5b9d9504d18ee88206e29ebc4ba1b47d28
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
added CLI l2fib flush-mac all
added API l2fib_flush_all
flushes all non static l2fib entries on all valid BDs
Change-Id: Ic963c88f4bed56308c03ab43106033132a0e87be
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
Fix a logic error related to timing out of the connections
following the active one. To avoid this class of issue in
the future, create corresponding testcases, as well as some
trivial sanity testcases for both IPv4 and IPv6.
Since these tests are timing-dependent and take up time,
mark them as extended tests.
Change-Id: I2c72bad5efda7db8aa9cb05801fe47928dc47927
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Change-Id: I32725006e9235a02cada5b0ad8974bfc4274339f
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Ensure that TCP data plus options does not exceed peer's advertised MSS.
Change-Id: I0de824cb3619346f0394dd694942fc1cf33a82b7
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Allows pure loss recovery retransmits only on timeout.
Change-Id: I563cdbf9e7b890a6569350bdbda4f746ace0544e
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I064a78df6a2cf734bb7c54f80682690c203a0a98
Signed-off-by: Igor Mikhailov (imichail) <imichail@cisco.com>
|
|
Change-Id: I6ce21317fcaa25781199f4329be815f076ab8b09
Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
|
|
Fix global_learn_count to be incremented or decremented by add and
deletion of non-static MAC entries from L2FIB only. Without this fix,
the counter may reach the threshold of 1M and stop MAC leanring even
though number of MAC entries in L2FIB is less than the threshold.
Cleanup indirect hash key memory used by mac_by_ip6 hash table on
BD deletion.
Change-Id: I13986c4e6304c7956122520dd3f83d6bb6e65a15
Signed-off-by: John Lo <loj@cisco.com>
|
|
Change-Id: Ia11fa42d1f2b21a6195e7dc890f958830f83d3a7
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: I7edea5d7b105ba66e0e04d509968b92cfb64c84a
Signed-off-by: Martin Gálik <magalik@cisco.com>
|