Age | Commit message (Collapse) | Author | Files | Lines |
|
Type: make
Change-Id: I8a28707a14ca6bcaf44b2a26dfc30ef2f2dbe749
Signed-off-by: Steven Luong <sluong@cisco.com>
|
|
Move output to log.txt.
11:51:58,111 Verifying against 3 packets in verify_udp_pkts.
11:51:58,111 ###[ Ethernet ]###
dst = 02:fe:4c:62:06:e5
src = 02:01:00:00:ff:02
type = 0x800
\###[ IP ]###
version = 4
ihl = 5
tos = 0x0
len = 128
...
Type: test
Change-Id: Iebaf34c2ac16e7fa8dffbdeadf18ab6c5f4c7494
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
rw_len (MPLS rewrite string length) is declared as unsigned but is used
as -rw_len with vlib_buffer_advance(), resulting in a wrong, huge
offset.
Type: fix
Fixes: 734d430f37251bc7e71d507983ee640ae1625fbe
Ticket: VPP-1705
Change-Id: I7357249f7e50b7d30fd61f5be4858a26e43df85d
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
dequeue_notify callback at app-layer needs to know available space in fifo,
so, session_dequeue_notify should be called after svm_fifo_dequeue_drop
Change-Id: I136675d29ec32bea9b33a05deb6710f72ce8d5b1
Signed-off-by: Vladimir Kropylev <vladimir.kropylev@enea.com>
|
|
New job submitted to Jenkins reported checkstyle failure in
test_stats_client.py. It needs a blank line in one place and line is
too long in another place.
Type: fix
Change-Id: I9b18df1df449a287570d614d6c5b514ceb88480c
Signed-off-by: Steven Luong <sluong@cisco.com>
|
|
Type: feature
Change-Id: If9804d3685d2a52efa06e412ae1ebb39c6a44b8b
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: fix
Change-Id: I1f8007ae659097152046aa1396cc23f126e29018
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: make
Change-Id: If82324f27163ab4ea270aac909c48a95dd1621ec
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Ring data space is following ring vec_header_t and ring elements immediately.
Add verification code in session_test.
Type: fix
Change-Id: I0bfa096a9f459128a588821d99b5cdb4f10ede38
Signed-off-by: Lijian Zhang <Lijian.Zhang@arm.com>
Reviewed-by: Sirshak Das <Sirshak.Das@arm.com>
|
|
Type: feature
Add support for insert/search/del with custom compare function.
Change-Id: Ibb740afc224d8adc29d3e1b51b46cdd738d1bd93
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
please consult the new tunnel proposal at:
https://wiki.fd.io/view/VPP/IPSec
Type: feature
Change-Id: I52857fc92ae068b85f59be08bdbea1bd5932e291
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Enhance the route add/del APIs to take a set of paths rather than just one.
Most unicast routing protocols calcualte all the available paths in one
run of the algorithm so updating all the paths at once is beneficial for the client.
two knobs control the behaviour:
is_multipath - if set the the set of paths passed will be added to those
that already exist, otherwise the set will replace them.
is_add - add or remove the set
is_add=0, is_multipath=1 and an empty set, results in deleting the route.
It is also considerably faster to add multiple paths at once, than one at a time:
vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.11
100000 routes in .572240 secs, 174751.80 routes/sec
vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.12
100000 routes in .528383 secs, 189256.54 routes/sec
vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.13
100000 routes in .757131 secs, 132077.52 routes/sec
vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.14
100000 routes in .878317 secs, 113854.12 routes/sec
vat# ip_route_add_del 1.1.1.1/32 count 100000 multipath via 10.10.10.11 via 10.10.10.12 via 10.10.10.13 via 10.10.10.14
100000 routes in .900212 secs, 111084.93 routes/sec
Change-Id: I416b93f7684745099c1adb0b33edac58c9339c1a
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
Signed-off-by: Ole Troan <ot@cisco.com>
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Fixes: 58492a8372
Change-Id: Ia2eeebc2488b57e57f8d5e52f9948d1cced7b6fc
Type: fix
Ticket: VPP-1698
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
This fixes two leaks in registering errors in the stats segment.
- The error name created by vlib_register_errors() was not freed.
- Duplicate error names (when interface readded) was added to the vector.
This fix also adds memory usage statistics for the statistics segment
as /mem/statseg/{used, total}
Change-Id: Ife98d5fc5baef5bdae426a5a1eef428af2b9ab8a
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Type: test
Change-Id: Ic81bd4a9eba3c89a746e7a9b9e471b59cd87fa40
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Previous use of strndup() required user to remember to call free().
Now return a vector pointing directly to the API message string.
Of course user must remember to copy the string out if lifetime
is longer than API message lifetime.
Change-Id: Ib5e2b3d52d258e1a42ea9ea9a9e04abbe360e2bf
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Check the returned pointer, report error and return in case of failure.
This avoids crashing without any useful clues or debug messages.
Type: fix
Change-Id: I15d0735a531c2d9a8b6f67b7d6fe326b98c963c3
Signed-off-by: Lijian Zhang <Lijian.Zhang@arm.com>
Reviewed-by: Honnappa Nagarahalli <Honnappa.Nagarahalli@arm.com>
|
|
Type: refactor
Change-Id: I4981704e3c886d90d482a1deba42633e92626743
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
This change is made fix a crash, because is_feature flag semantics turn
out to be different from "custom app code" semantics. Introduce a flag
which custom plugins/apps can use to instead of tying that code to
is_feature flag.
Change-Id: Ief5898711e68529f9306cfac54c4dc9b3650f9e3
Ticket: N/A
Type: fix
Fixes: 21aa8f1022590b8b5caf819b4bbd485de0f1dfe5
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Type: feature
Change-Id: I53e1f05b2b048925fca3b2f6b0499ff9c3e6ee12
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
Fixes: b4ff07a
Change-Id: I2578ae3e093961fa8765568b5fedcf75ae9487f6
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: feature
Change-Id: I3d7009505ddbb2c41d8619d9195c6a5373fa9a04
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Two codes diverged in the packet processor
And sorry I could not use them both
Long I stood being but one developer
And studied one as far as I could
To where the code said bitwise OR
Then took the other, as just could see,
And having perhaps the better bit,
Because it followed the RFC
And used the cryptic XOR in C,
Had run them both a fair bit.
And both equally ran that morning
With packets dropped and flowing.
Oh, I flagged the first for dropping!
Yet knowing bug leads to debuging
I hoped I'd never be returning.
I shall be commiting this with a sigh
Somewhere ages and ages hence:
Two codes diverged by a bit, and I,
I made the packets flow on by,
And that has made all the difference.
Type: fix
Change-Id: If2698726d5501fde76211994f8efc37119345352
Signed-off-by: Jon Loeliger <jdl@netgate.com>
|
|
An SA can be used only for ESP or AH nver both, so it needs only one
coresponding DPO.
Type: refactor
Change-Id: I689060f795ee352245a0eaed0890a6b234c63d71
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
rather than SRC/DST address error which is not so helpfull
Type: fix
Fixes: af3f0783
Change-Id: Ie2143e4e29de87d93e79bd96284c041bdbffd98e
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: refactor
Change-Id: I97fa59a0ba0b6b7a98698926020ffffcf6ae6ba3
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Show the constructor of the object instead of the memory location.
api client: <VPPApiClient apifiles=None, testmode=False,
async_thread=True, logger=<logging.Logger object at 0x7f35d1bd2590>,
read_timeout=1, use_socket=False,
server_address='/tmp/vpp-unittest-TestGbpApi-pOKbWg/api.sock'>
vs.
api client: <vpp_papi.vpp_papi.VPPApiClient object at 0x7fa0003df750>
Type: feature
Change-Id: I1460d76f6796776dd525c0844e9e426ec2d52398
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: feature
Change-Id: Ie020fd7e2618284a63efbeb9895068f27c0fb9ab
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Costs nothing, and leaves nothing to the imagination.
Type: fix
Change-Id: I7c9f9fb9325475c268eca062da7bbbf014438cfc
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Type: fix
Fixes: 8d7c502002
Change-Id: Ia6de250f20200c17937d9d7b2aab17ccd81d7823
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: docs
Change-Id: I09f6984b74ebb7ee743881b4ad496618542eeaa5
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Many missing "extern" declarations, it's hard to imagine why the
related compile/link errors just showed up.
Type: fix
Change-Id: I0878bf5fdb10ffdd8e0c49c9e5153cddaf3bc1fd
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Add a string hash to make sure that strings in the string table are
unique. This optimization has been coded piecemeal in multiple places,
we should have made the underlying function do the work years ago.
Type: fix
Change-Id: I5010fd4926b9b80ce3a168748f6de64e333ef498
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Add a version in the base header of the stat segment
To make support for multiple reader implementations safer.
Change-Id: I6816e2a51a98c2df1e621e80d4ef0b4ba4e9f47b
Type: feature
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
encapped SPI-0 packets
Type: fix
Fixes: b71fa75d48
Change-Id: I2d81b373f7659e702759939c096b315afa36f621
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
Fixes: 6407ba56
Change-Id: I6d3ce68962986921e04aa00c989d8afa157ebcb8
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: feature
Change-Id: I72f35444c73c6a7099d34f7d5031cbe82cbdd383
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: Fix
Fixes: dd2423ef
Change-Id: I76f0ed5027161c396186845043f5afe395c20280
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
Fixes: 999c8ee6d6
Change-Id: Idcdddbe45f2e0adfd375b07199bb30f77c28702d
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
vpp would fail 'tcp_in_fastrecovery (tc)' if tcp_connection_get returns 0.
Change-Id: I512cba5234b3777f1737bec9451940e7e7975f15
Signed-off-by: Guoao Sun <guoao.sun@intel.com>
|
|
This patch refactors AH decrypt node in such way that it calls crypto
backend only once per node call.
Type: refactor
Change-Id: I0dc72ff699042a151e64d44f76f791c5136ec009
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Type: docs
Change-Id: I4ae65ed22275abf0d15045f3b09625d6aaa3b67b
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Build api trace message print fns into the built-in copy of api_format.c
Optimize memory allocator behavior when the api trace wraps.
Type: Fix
Change-Id: If799d8784a459f981fc9ee3a3ca03d3f63b2bcd0
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Type: fix.
Change-Id: I48587c5eba6de6de820d348177b6733d0b048013
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: refactor
Change-Id: I421750147a8a821bd0b522daf6c2b7239e551f12
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: refactor
Use tcp_available_cc_snd_space instead of sack scoreboard
last_delivered_bytes to estimate available space when retransmitting
with no sack support
Change-Id: I938c637279eaf8c5634c4e97f0633fa2d0054fac
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: feature
cc_plot.py can plot cc stats collected via elogs from tcp connections.
To enable the collection of cc stats, tcp must be compiled with
TCP_DEBUG_CC_STAT turned on.
Once the tests have been carried out, and elogs have been saved with "ev
save log <file>", the logs can be converted to txt format with the
convert_evt script. The resulting file can be used as input to the
cc_plots script.
Change-Id: I16df2993fa09cab9ad35f91825eab7df4da6428b
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: feature
Change-Id: I5e04991afd7500673db121e4529275e9aff15e65
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Previusly, read error could happen before message_thread starts,
so do not attempt to join in that case.
Change-Id: Ie119916831e320e38eb02e48515b4c6a9cb937e5
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
Type: test
Change-Id: I92921444ef6b0e574701398cf57971c9ecc1cc91
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|