Age | Commit message (Collapse) | Author | Files | Lines |
|
Type: improvement
There is a mode field in ipip_tunnel_details. The handler for the dump
API does not do anything to populate it so it always contains 0
(TUNNEL_API_MODE_P2P). This is correct for p2p tunnels but is wrong for
multipoint tunnels.
Populate the field with the correct mode.
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
Change-Id: I6c1288a0d3929db0f67100748b5760c36b594f97
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ieb2d1e6e0949844a70c81b218ca7dc83690776ca
|
|
Before this fix, the src_ip_sticky flag was passed as an argument to
the lb_node_get_hash function, which computes a hash value for a packet.
However, in per-port-vip case, the value of src_ip_sticky flag may be
different for each port number. As a result, the value is the same for
all port numbers, even though it is a per-port-vip case.
This commit fixes the src_ip_sticky evaluation by delaying it until the
packet is received, so that the correct value is obtained. Also, the
unit test case has been enhanced for this bug fix.
The steps to reproduce this bug are described below:
https://lists.fd.io/g/vpp-dev/message/23248
Type: fix
Fixes: 613e6dc0bf92 ("lb: add source ip based sticky load balancing")
Change-Id: I483492b214a1768e7a21fd86edd5151b3c46528b
Signed-off-by: Nobuhiro MIKI <nmiki@yahoo-corp.jp>
|
|
nl_route_add() recently started to use its optional argument to check
whether replace flag is set for the message. When notification messages
are processed, the argument is a pointer to the corresponding message
info. However, when dump replies are processed, the argument is a null
pointer. This leads to null pointer dereference and crash when dump of
routes is processed.
With this fix, check for replace flag only if message info was passed
to nl_route_add(). Otherwise, assume the flag is not set. Dump replies
do not have it set.
Type: fix
Change-Id: Icb04a1146e09cc965b623018c28f91b347be0eab
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
|
|
Type: improvement
Change-Id: I95023d2e6034b77952e0423d0430b433ea0dab15
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
1) Imports ENCAP_MPLS labels from IPv4/IPv6 routes.
Note that this requires libnl 3.6.0 or newer.
In previous patches, the fib_path_ext_t had a path ID of -1.
After a long investigation, it turned out to be caused by route weight
being set to 0. There is a comment explaining more details.
2) Handles MPLS routes.
MPLS routes were wrongly added as IPv4 routes before.
POP and SWAP are now both supported.
All the routes are installed as NON-EOS and EOS routes,
as the Linux kernel does not differentiate.
EOS POP used in PHP uses the next-hop address family
to determine the resulting address family.
This patch is sufficient for P setups.
PE setups with implicit null should also function okay, as long as a
seperate label gets programmed per address family.
PE setups with explicit null will also forward packets,
but punting is a bit odd and needs MPLS input enabled on the LCP host
device.
3) Propagate MPLS input state to LCP Pair and Linux.
Since the Linux kernel uses the MPLS routes itself,
the LCP pair tap needs MPLS enabled to allow host originated packets.
This also syncs the Linux `net.mpls.conf.<host_if>.input` sysctl to
allow punted packets to have MPLS labels, mostly explicit nulls.
In addition, a special feature is enabled to cross connect MPLS packets
coming from Linux directly to interface-output untouched.
Make sure to enable MPLS/add a table in VPP first and load the
MPLS kernel modules!!
Type: feature
Change-Id: Ie4184bb4cc96905bf8b483a27e7ca6d251697374
Signed-off-by: Adrian Pistol <vifino@posteo.net>
Signed-off-by: Pim van Pelt <pim@ipng.nl>
|
|
stats entries /if/names are never deleted as it is a vector of the
sw_if_index value. When the interface is deleted and then created again
later, and if the new interface takes a different sw_if_index, we may
end up with duplicate entries for the same interface name. For example,
the following configuration sequence causes problem
create loopback interface
create loopback interface
delete loopback interface intfc loop0
delete loopback interface intfc loop1
create loopback interface
vpp_get_stats dump /if/names
[0]: local0 /if/names
[1]: loop0 /if/names
[2]: loop0 /if/names
The fix is to set the delete /if/names entry to deleted when the interface is deleted.
Type: fix
Change-Id: I7d811b12d56e3cf8c7deffe14736ea0f24814d02
Signed-off-by: Steven Luong <sluong@cisco.com>
|
|
clang-16 complains about signed one-bit bitfield value
changes from 1 to -1. Use unsigned type instead.
Type: fix
Signed-off-by: Tianyu Li <tianyu.li@arm.com>
Change-Id: Iab006c036d4068af2fe3caaefc871a95b26cc578
|
|
List of changed messages:
- lcp_itf_pair_add_del
- lcp_itf_pair_add_del_reply
- lcp_itf_pair_add_del_v2
- lcp_itf_pair_add_del_v2_reply
This change is part of VPP API cleanup initiative.
Type: fix
Signed-off-by: Ondrej Fabry <ofabry@cisco.com>
Change-Id: Ic20a852dd1fb27858c8776095f9c98757b89bfe8
|
|
List of changed messages:
- ip_punt_redirect_dump
- ip_punt_redirect_details
This change is part of VPP API cleanup initiative.
Type: fix
Signed-off-by: Ondrej Fabry <ofabry@cisco.com>
Change-Id: Icf91f760b9bd328110b0f9fc2e421bb954033d21
|
|
List of changed messages:
- memif_socket_filename_add_del
- memif_socket_filename_add_del_reply
- memif_create
- memif_create_reply
This change is part of VPP API cleanup initiative.
Type: fix
Signed-off-by: Ondrej Fabry <ofabry@cisco.com>
Change-Id: Id334990584b64a0efa3c28a3d8b6b641adab8c09
|
|
List of changed messages:
- memclnt_create
- memclnt_create_reply
This change is part of VPP API cleanup initiative.
Type: fix
Signed-off-by: Ondrej Fabry <ofabry@cisco.com>
Change-Id: I0031cc2f1604ca4c34574c8e1ee28e358c2bbe5d
|
|
List of changed messages:
- pg_create_interface
- pg_create_interface_reply
This change is part of VPP API cleanup initiative.
Type: fix
Signed-off-by: Ondrej Fabry <ofabry@cisco.com>
Change-Id: I574927f0820c54d748f27fd96a45afec5243b645
|
|
List of changed messages:
- sr_policies_dump
This change is part of VPP API cleanup initiative.
Type: fix
Signed-off-by: Ondrej Fabry <ofabry@cisco.com>
Change-Id: I16ae1bed83ad8c73e3254b6d195251702de84f97
|
|
List of changed messages:
- ipsec_sad_entry_add_del_v2
- ipsec_sad_entry_add_del_v2_reply
- ipsec_sa_v2_dump
- ipsec_sa_v2_details
This change is part of VPP API cleanup initiative.
Type: fix
Signed-off-by: Ondrej Fabry <ofabry@cisco.com>
Change-Id: I8fd6906e9684ef7ebc0688dc8b0637ae2dc8d0a2
|
|
Enabling debug info RPM creation in spec file.
Type: fix
Signed-off-by: Laszlo Kiraly <laszlo.kiraly@est.tech>
Change-Id: Id284b135ec4125905145f7902a6e1cf42ba65aa4
|
|
VPP build failed when build xdp-tool on opensuse
Add the missing libraries and headers.
Type: fix
Signed-off-by: Laszlo Kiraly <laszlo.kiraly@est.tech>
Change-Id: I8c3f28ac6e88cd61a1bf0a823ffa1d5f3097be40
|
|
This patch introduces sw_ring to the crypto op data path implementation,
so that raw data path and crypto op data path use same mechanism of processing
async frames. Crypto op ring has been removed from the implementation.
Type: improvement
Signed-off-by: Piotr Bronowski <piotrx.bronowski@intel.com>
Change-Id: Id823f80a88cfa0ff40252616a36de8bb044c7f45
|
|
Python Dict attribute "has_key" was removed in Python3. Use "in"
operation instead.
Type: fix
Signed-off-by: Ting Xu <ting.xu@intel.com>
Change-Id: I7b63b0689e9970ca798921368c5616875f7d5682
|
|
Type: fix
Change-Id: I84bbb28490d9c66c5bf55839ab75b3aec1bf5854
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Change-Id: I342de0a375b783725aa2b621c1c70bc8bf646450
Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
Type: improvement
|
|
Change-Id: I7a988fafe98599e4fcf7cdaa307a69b9d76650f0
Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
Type: improvement
|
|
When vlib buffer is processed on vnet side its length is corrected by
cipher padding and icv_sz. These changes need to be reflected in
the mbuf internals.
Type: fix
Signed-off-by: Piotr Bronowski <piotrx.bronowski@intel.com>
Change-Id: I0aa03f67f556dfc8f9a577ca1967210527221e02
|
|
There is an API call to change neighbor database configuration (i.e.
limit on peer number, aging, and recycling). With this change, make
getting current values of these settings available via the API.
Type: improvement
Change-Id: Ie9394e086b68cf9b28ad98dea162f203f8043cbb
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I35391fb8c39defbe0e57a241a357c3c98e8cef54
|
|
Type: test
Change-Id: I15e4f2fb84cb4f34b6fea95978db000854a63e78
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
List of changed messages:
- af_packet_create
- af_packet_create_reply
- af_packet_create_v2
- af_packet_create_v2_reply
This change is part of VPP API cleanup initiative.
Type: fix
Signed-off-by: Ondrej Fabry <ofabry@cisco.com>
Change-Id: Ia065c3bbc2c7923de64f47417099aea1aa1216b1
|
|
List of changed messages:
- tap_create_v2
- tap_create_v2_reply
This change is part of VPP API cleanup initiative.
Type: fix
Signed-off-by: Ondrej Fabry <ofabry@cisco.com>
Change-Id: I7b1b22cc4a0e31f5c19fe48e7a0f30631576f9df
|
|
List of changed messages:
- vxlan_add_del_tunnel
- vxlan_add_del_tunnel_v2
- vxlan_add_del_tunnel_reply
- vxlan_add_del_tunnel_v2_reply
- vxlan_tunnel_dump
- vxlan_tunnel_details
This change is part of VPP API cleanup initiative.
Type: fix
Signed-off-by: Ondrej Fabry <ofabry@cisco.com>
Change-Id: I0a7227e76a493731fd136f8e6310ad372fab2494
|
|
Namespace keyword is reverved c++ word, so it's not possible to include
vapi header for af_xdp plugin and use it.
Type: fix
Signed-off-by: Stanislav Zaikin <stanislav.zaikin@46labs.com>
Change-Id: I42a0e0a89ff2c407090d3c18c1bc5a5605ddf032
|
|
If a frame should be sent to 'ethernet-input' set the
ETH_INPUT_FRAME_F_SINGLE_SW_IF_IDX flag. It will force 'ethernet-input'
to use a fast-path for such frames.
This patch also aligns the behaviour with other input nodes.
Type: improvement
Change-Id: Icff0fa31204d5304a2ea0a4f4e7bc418dedbfe32
Signed-off-by: Stanislav Zaikin <zstaseg@gmail.com>
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Change-Id: I7177ada23e5a69ec8e362ec98b98010c3b44b3d7
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ia98dae5fdde16426d5457742aff0a1b04db4d034
|
|
An SA is normally bound to the first thread using it. However, one
could want to manually bind an SA to a specific worker.
Type: improvement
Signed-off-by: Maxime Peim <mpeim@cisco.com>
Change-Id: I05cbbf753e44a01d9964ee47812c964db9bbb488
|
|
Type: fix
Signed-off-by: Stanislav Zaikin <stanislav.zaikin@46labs.com>
Change-Id: I07f54bb643c24b1839a2d0e93acc593d13a43fed
|
|
Type: feature
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I435ff10fa3af15b0bed83607aca508a1c087a159
|
|
- Updated/rebased version of https://gerrit.fd.io/r/c/vpp/+/34199
Type: test
Change-Id: I43913ecfd11a4578bdb10c4be76253fe38d57976
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
Packet-generator does not support TCP options.
Along with its support, a formatting function has been added.
Further work will be needed to update header formatting functions
to take into account TCP connection options. For now, TCP options
are taken on a per-packet basis.
Type: improvement
Change-Id: Id800887853c4941d893be353ce6d8624ed8bbc5d
Signed-off-by: Maxime Peim <mpeim@cisco.com>
|
|
cdf73b973181ff4c67147900408216e37bae897a has added the qemu tests as part of the default test run,
which results in "make test" failure in more restricted environments which do not allow the
namespace creation.
Add a config flag to skip those tests, and skip them if the namespace creation fails.
Type: test
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
Change-Id: Ie631f7fb2a80864f77c79619eba4a43712e950e5
|
|
Make sure half-open sessions are marked as transport closed once
connected notification is provided. This ensures that if they've been
scheduled for tx, the event is ignored.
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I8c44584e843d93365ec737ae4e1bcb74eba35506
|
|
Type: fix
Change-Id: I7c6fb783e5200773cbd02c86d39fd241efcc39f9
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I6900d9ab147d35f99f944bf741f6bb329c8ea0df
|
|
This rework tries to address issues found on SPR QAT, for traffic
reaching max possible throughoutput for single QAT PF packet drops were
observed.
Fix changes enq/deq scheme by utilizing software ring in enq call from
VNET but enq and deq to QAT happens only in deq callback function what
should enable better utlization of hardware resources.
Type: improvement
Signed-off-by: Dastin Wilski <dastin.wilski@gmail.com>
Signed-off-by: Piotr Bronowski <piotrx.bronowski@intel.com>
Change-Id: I2e8c473d20a269fd5e93f0c8d1f8c8aa193712bd
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I9f7dfe086bf7e11b7e0de7392f020c1052ba656a
|
|
Type: test
Change-Id: I5cf5a0e6437b274e565066f1012d7225c62b87a8
Signed-off-by: Naveen Joy <najoy@cisco.com>
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I73034cdba51157466713884c3fbeae7054d92ad7
|
|
The af_xdp plugin does not support chained buffers; attempting to send
chain buffers will result truncated packets or even send other packet's
data. As a workaround, turn any buffer chain into a single buffer before
tx.
Type: fix
Change-Id: I05dec912455eb2bb6c8122a28cd646f88983aa9a
Signed-off-by: Shmuel Hazan <shmuel.h@siklu.com>
|
|
Type: fix
Ticket: VPP-2078
Change-Id: I418269632bdfc823c5f0ba7652957277276d294d
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
This patch introduces sw_ring. This ring is used in next set of patchas
and plays role of a buffer for QAT, allowing collecting frame elements
in case QAT queue is fully utilized, and assembling frame
from QAT dequeued elements.
Type: improvement
Signed-off-by: Piotr Bronowski <piotrx.bronowski@intel.com>
Signed-off-by: Dastin Wilski <dastin.wilski@gmail.com>
Change-Id: I20718e200986ab4dba5cbc31c05a904072a6981a
|
|
Make sure the same frame is not used for multiple interfaces, otherwise it breaks the ETH_INPUT_FRAME_F_SINGLE_SW_IF_IDX promise.
Type: fix
Signed-off-by: Artem Glazychev <artem.glazychev@xored.com>
Change-Id: I02546259ceaea36f65cb9f78b9b3ee45ed4075c9
|