Age | Commit message (Collapse) | Author | Files | Lines |
|
Type: fix
Change-Id: I438ef488357456e9415e51a17355e9eba8518808
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
It is a function in vlib, so no reason to mention vnet.
Type: fix
Fixes: bf179a91d8d224c64d08643a2bb52580f68ce96b
Change-Id: Ic5f601d94d88b667f7ce44a017a0e1d5b4db5da1
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
The extra format line was added for no reason from patch ff27c9f8e.
Type: fix
Fixes: ff27c9f8e
Change-Id: Ib25149cc8a17c29d0c8a0dbc06f0ea12ca4f328c
Signed-off-by: Steven Luong <sluong@cisco.com>
|
|
Type: improvement
Change-Id: Ie0bad9e03ac2e29da23af01ee7f63cb44489ad9c
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Type: improvement
Change-Id: Ic6e60597d2be63e3a0ae4399a81dbbd72392f30d
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: feature
Change-Id: I28fb38e49c89f4c4d4cc58c1a5c0aa8502678472
Signed-off-by: Maxime Peim <mpeim@cisco.com>
|
|
clang-16 complains about signed one-bit bitfield value changes
from 1 to -1. Use unsigned type instead.
Type: fix
Signed-off-by: Tianyu Li <tianyu.li@arm.com>
Change-Id: I84f8cf314d36183a5e6f544cd756c01d1d10a1a5
|
|
In the current implementation there is a bug related to the incorrect
message handling due to the wrong id.
The fix changes logic responsible for handling incoming API messages
by correcting their ids.
Type: fix
Signed-off-by: Gabriel Oginski <gabrielx.oginski@intel.com>
Change-Id: Iea29506053c9fd2e1d01bce83e7f4a6e1de39321
|
|
Type: improvement
Support SO_ORIGINAL_DST socket option to get original dst_ip4 and dst_port if nat44 rule enabled.
Change-Id: If00e00d03e48f3b78a23a68f1b078954d79dd0f7
Signed-off-by: qinyang <qiny@yusur.tech>
|
|
Type: test
Change-Id: I6edc8858b802d3d32159d71c1e867a06cc1025d5
Signed-off-by: Naveen Joy <najoy@cisco.com>
|
|
When _VEC128 instructions are not enabled logic is buggy.
The function always returned 1.
Type: fix
Signed-off-by: Piotr Bronowski <piotrx.bronowski@intel.com>
Change-Id: I603200637e8d65813f4e49ef15d798e74b79b9cf
|
|
When msg->msg_controllen is set in recvmsg, the caller wants to receive
additional information about the messages. However, they might not
always be available. In that case, we should clear cmsg since
the caller uses CMSG_NXTHDR which might access uninitialized fields in
cmsg.
Type: fix
Change-Id: Ifdf9634bfcb1427f7ae3812014a46bfd7f4bc473
Signed-off-by: Steven Luong <sluong@cisco.com>
|
|
This patch addresses the issue when the list of available interfaces
is not up to date. Due to this issue adding a new route fails
and finally the connection is not established.
Type: fix
Signed-off-by: Gabriel Oginski <gabrielx.oginski@intel.com>
Change-Id: I3a63c0dd99ebc28ea149b4b23867440937682761
|
|
This patch addresses the issue where the message ID registration
in the register_event function is incorrect. Due to this incorrect
registration, the lookup for the corresponding callback on received
messages fails, eventually leading to a segmentation fault
and double-free memory space.
Type: fix
Signed-off-by: Gabriel Oginski <gabrielx.oginski@intel.com>
Change-Id: If95182f972f64adb44d514e18c831cc9627d8f0f
|
|
In the current implementation there is a bug in the function
responsible for getting software interface index by the name of the
interface. Incorrect function is used to send the API message, also
the handler with replied message is incorrect.
The fix changes function to send dump message and also adds handler
with replied message in the correct way.
Type: fix
Signed-off-by: Gabriel Oginski <gabrielx.oginski@intel.com>
Change-Id: Id1a3ba2ce7e92d216907f344431b9e2acb1d5572
|
|
- Move the VPP API Change Process documentation
from the wiki page into the in-tree VPP docs
Type: docs
Change-Id: I42f661618b8632230bebe3aa8fbad455b9a05d01
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
Type: improvement
There is a mode field in ipip_tunnel_details. The handler for the dump
API does not do anything to populate it so it always contains 0
(TUNNEL_API_MODE_P2P). This is correct for p2p tunnels but is wrong for
multipoint tunnels.
Populate the field with the correct mode.
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
Change-Id: I6c1288a0d3929db0f67100748b5760c36b594f97
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ieb2d1e6e0949844a70c81b218ca7dc83690776ca
|
|
Before this fix, the src_ip_sticky flag was passed as an argument to
the lb_node_get_hash function, which computes a hash value for a packet.
However, in per-port-vip case, the value of src_ip_sticky flag may be
different for each port number. As a result, the value is the same for
all port numbers, even though it is a per-port-vip case.
This commit fixes the src_ip_sticky evaluation by delaying it until the
packet is received, so that the correct value is obtained. Also, the
unit test case has been enhanced for this bug fix.
The steps to reproduce this bug are described below:
https://lists.fd.io/g/vpp-dev/message/23248
Type: fix
Fixes: 613e6dc0bf92 ("lb: add source ip based sticky load balancing")
Change-Id: I483492b214a1768e7a21fd86edd5151b3c46528b
Signed-off-by: Nobuhiro MIKI <nmiki@yahoo-corp.jp>
|
|
nl_route_add() recently started to use its optional argument to check
whether replace flag is set for the message. When notification messages
are processed, the argument is a pointer to the corresponding message
info. However, when dump replies are processed, the argument is a null
pointer. This leads to null pointer dereference and crash when dump of
routes is processed.
With this fix, check for replace flag only if message info was passed
to nl_route_add(). Otherwise, assume the flag is not set. Dump replies
do not have it set.
Type: fix
Change-Id: Icb04a1146e09cc965b623018c28f91b347be0eab
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
|
|
Type: improvement
Change-Id: I95023d2e6034b77952e0423d0430b433ea0dab15
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
1) Imports ENCAP_MPLS labels from IPv4/IPv6 routes.
Note that this requires libnl 3.6.0 or newer.
In previous patches, the fib_path_ext_t had a path ID of -1.
After a long investigation, it turned out to be caused by route weight
being set to 0. There is a comment explaining more details.
2) Handles MPLS routes.
MPLS routes were wrongly added as IPv4 routes before.
POP and SWAP are now both supported.
All the routes are installed as NON-EOS and EOS routes,
as the Linux kernel does not differentiate.
EOS POP used in PHP uses the next-hop address family
to determine the resulting address family.
This patch is sufficient for P setups.
PE setups with implicit null should also function okay, as long as a
seperate label gets programmed per address family.
PE setups with explicit null will also forward packets,
but punting is a bit odd and needs MPLS input enabled on the LCP host
device.
3) Propagate MPLS input state to LCP Pair and Linux.
Since the Linux kernel uses the MPLS routes itself,
the LCP pair tap needs MPLS enabled to allow host originated packets.
This also syncs the Linux `net.mpls.conf.<host_if>.input` sysctl to
allow punted packets to have MPLS labels, mostly explicit nulls.
In addition, a special feature is enabled to cross connect MPLS packets
coming from Linux directly to interface-output untouched.
Make sure to enable MPLS/add a table in VPP first and load the
MPLS kernel modules!!
Type: feature
Change-Id: Ie4184bb4cc96905bf8b483a27e7ca6d251697374
Signed-off-by: Adrian Pistol <vifino@posteo.net>
Signed-off-by: Pim van Pelt <pim@ipng.nl>
|
|
stats entries /if/names are never deleted as it is a vector of the
sw_if_index value. When the interface is deleted and then created again
later, and if the new interface takes a different sw_if_index, we may
end up with duplicate entries for the same interface name. For example,
the following configuration sequence causes problem
create loopback interface
create loopback interface
delete loopback interface intfc loop0
delete loopback interface intfc loop1
create loopback interface
vpp_get_stats dump /if/names
[0]: local0 /if/names
[1]: loop0 /if/names
[2]: loop0 /if/names
The fix is to set the delete /if/names entry to deleted when the interface is deleted.
Type: fix
Change-Id: I7d811b12d56e3cf8c7deffe14736ea0f24814d02
Signed-off-by: Steven Luong <sluong@cisco.com>
|
|
clang-16 complains about signed one-bit bitfield value
changes from 1 to -1. Use unsigned type instead.
Type: fix
Signed-off-by: Tianyu Li <tianyu.li@arm.com>
Change-Id: Iab006c036d4068af2fe3caaefc871a95b26cc578
|
|
List of changed messages:
- lcp_itf_pair_add_del
- lcp_itf_pair_add_del_reply
- lcp_itf_pair_add_del_v2
- lcp_itf_pair_add_del_v2_reply
This change is part of VPP API cleanup initiative.
Type: fix
Signed-off-by: Ondrej Fabry <ofabry@cisco.com>
Change-Id: Ic20a852dd1fb27858c8776095f9c98757b89bfe8
|
|
List of changed messages:
- ip_punt_redirect_dump
- ip_punt_redirect_details
This change is part of VPP API cleanup initiative.
Type: fix
Signed-off-by: Ondrej Fabry <ofabry@cisco.com>
Change-Id: Icf91f760b9bd328110b0f9fc2e421bb954033d21
|
|
List of changed messages:
- memif_socket_filename_add_del
- memif_socket_filename_add_del_reply
- memif_create
- memif_create_reply
This change is part of VPP API cleanup initiative.
Type: fix
Signed-off-by: Ondrej Fabry <ofabry@cisco.com>
Change-Id: Id334990584b64a0efa3c28a3d8b6b641adab8c09
|
|
List of changed messages:
- memclnt_create
- memclnt_create_reply
This change is part of VPP API cleanup initiative.
Type: fix
Signed-off-by: Ondrej Fabry <ofabry@cisco.com>
Change-Id: I0031cc2f1604ca4c34574c8e1ee28e358c2bbe5d
|
|
List of changed messages:
- pg_create_interface
- pg_create_interface_reply
This change is part of VPP API cleanup initiative.
Type: fix
Signed-off-by: Ondrej Fabry <ofabry@cisco.com>
Change-Id: I574927f0820c54d748f27fd96a45afec5243b645
|
|
List of changed messages:
- sr_policies_dump
This change is part of VPP API cleanup initiative.
Type: fix
Signed-off-by: Ondrej Fabry <ofabry@cisco.com>
Change-Id: I16ae1bed83ad8c73e3254b6d195251702de84f97
|
|
List of changed messages:
- ipsec_sad_entry_add_del_v2
- ipsec_sad_entry_add_del_v2_reply
- ipsec_sa_v2_dump
- ipsec_sa_v2_details
This change is part of VPP API cleanup initiative.
Type: fix
Signed-off-by: Ondrej Fabry <ofabry@cisco.com>
Change-Id: I8fd6906e9684ef7ebc0688dc8b0637ae2dc8d0a2
|
|
Enabling debug info RPM creation in spec file.
Type: fix
Signed-off-by: Laszlo Kiraly <laszlo.kiraly@est.tech>
Change-Id: Id284b135ec4125905145f7902a6e1cf42ba65aa4
|
|
VPP build failed when build xdp-tool on opensuse
Add the missing libraries and headers.
Type: fix
Signed-off-by: Laszlo Kiraly <laszlo.kiraly@est.tech>
Change-Id: I8c3f28ac6e88cd61a1bf0a823ffa1d5f3097be40
|
|
This patch introduces sw_ring to the crypto op data path implementation,
so that raw data path and crypto op data path use same mechanism of processing
async frames. Crypto op ring has been removed from the implementation.
Type: improvement
Signed-off-by: Piotr Bronowski <piotrx.bronowski@intel.com>
Change-Id: Id823f80a88cfa0ff40252616a36de8bb044c7f45
|
|
Python Dict attribute "has_key" was removed in Python3. Use "in"
operation instead.
Type: fix
Signed-off-by: Ting Xu <ting.xu@intel.com>
Change-Id: I7b63b0689e9970ca798921368c5616875f7d5682
|
|
Type: fix
Change-Id: I84bbb28490d9c66c5bf55839ab75b3aec1bf5854
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Change-Id: I342de0a375b783725aa2b621c1c70bc8bf646450
Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
Type: improvement
|
|
Change-Id: I7a988fafe98599e4fcf7cdaa307a69b9d76650f0
Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
Type: improvement
|
|
When vlib buffer is processed on vnet side its length is corrected by
cipher padding and icv_sz. These changes need to be reflected in
the mbuf internals.
Type: fix
Signed-off-by: Piotr Bronowski <piotrx.bronowski@intel.com>
Change-Id: I0aa03f67f556dfc8f9a577ca1967210527221e02
|
|
There is an API call to change neighbor database configuration (i.e.
limit on peer number, aging, and recycling). With this change, make
getting current values of these settings available via the API.
Type: improvement
Change-Id: Ie9394e086b68cf9b28ad98dea162f203f8043cbb
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I35391fb8c39defbe0e57a241a357c3c98e8cef54
|
|
Type: test
Change-Id: I15e4f2fb84cb4f34b6fea95978db000854a63e78
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
List of changed messages:
- af_packet_create
- af_packet_create_reply
- af_packet_create_v2
- af_packet_create_v2_reply
This change is part of VPP API cleanup initiative.
Type: fix
Signed-off-by: Ondrej Fabry <ofabry@cisco.com>
Change-Id: Ia065c3bbc2c7923de64f47417099aea1aa1216b1
|
|
List of changed messages:
- tap_create_v2
- tap_create_v2_reply
This change is part of VPP API cleanup initiative.
Type: fix
Signed-off-by: Ondrej Fabry <ofabry@cisco.com>
Change-Id: I7b1b22cc4a0e31f5c19fe48e7a0f30631576f9df
|
|
List of changed messages:
- vxlan_add_del_tunnel
- vxlan_add_del_tunnel_v2
- vxlan_add_del_tunnel_reply
- vxlan_add_del_tunnel_v2_reply
- vxlan_tunnel_dump
- vxlan_tunnel_details
This change is part of VPP API cleanup initiative.
Type: fix
Signed-off-by: Ondrej Fabry <ofabry@cisco.com>
Change-Id: I0a7227e76a493731fd136f8e6310ad372fab2494
|
|
Namespace keyword is reverved c++ word, so it's not possible to include
vapi header for af_xdp plugin and use it.
Type: fix
Signed-off-by: Stanislav Zaikin <stanislav.zaikin@46labs.com>
Change-Id: I42a0e0a89ff2c407090d3c18c1bc5a5605ddf032
|
|
If a frame should be sent to 'ethernet-input' set the
ETH_INPUT_FRAME_F_SINGLE_SW_IF_IDX flag. It will force 'ethernet-input'
to use a fast-path for such frames.
This patch also aligns the behaviour with other input nodes.
Type: improvement
Change-Id: Icff0fa31204d5304a2ea0a4f4e7bc418dedbfe32
Signed-off-by: Stanislav Zaikin <zstaseg@gmail.com>
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Change-Id: I7177ada23e5a69ec8e362ec98b98010c3b44b3d7
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ia98dae5fdde16426d5457742aff0a1b04db4d034
|
|
An SA is normally bound to the first thread using it. However, one
could want to manually bind an SA to a specific worker.
Type: improvement
Signed-off-by: Maxime Peim <mpeim@cisco.com>
Change-Id: I05cbbf753e44a01d9964ee47812c964db9bbb488
|