summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2019-10-28vapi: switch to python3Ole Troan3-4/+4
Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: I78aac39b697e29bb454e5e95855e79ea3122b4c3
2019-10-26l2: l2bd nd termination test instabilityOle Troan1-1/+1
The test for ND event suppression reused the previous test run ipv6 address, and would sometimes consider that a duplicate, and therefore suppressing that one too. Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: I1b115aa4eba9d57770fa03fcf38b7a1c251cfe88
2019-10-25dhcp: fix crash on unicast renewal sendNeale Ranns12-421/+646
Type: fix - when the addresses were learnt a copy of the client was sent to the main thread, this meant the unicast adjacecny was saved on the copy not on the original. - Add logging. - Improve the proxy-node that hands the clint packets so the DHCP packets are traced. - allow a renewal to configure new address data Change-Id: I6ab0afcccbc4a1cdefdd1b8beeda8fc7ba20ec1f Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-10-25mdata: buffer metadata change tracker pluginDave Barach10-23/+799
A handy tool in case you need to know which metadata will be changed when a packet visits a certain node. Reflect metadata changes into format functions used by the vpp-specific wireshark dissector. Type: feature Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I96fe8a24db4082bb29fe2a33cc522e8616a3a1bb
2019-10-24gso: fix buffers traceBenoît Ganne1-0/+1
When segmenting, new buffers must inherit the original buffer trace handle. Type: fix Change-Id: Ibd1859a501b2862906dfc563b98652cfee5681da Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-10-24lacp: add actor steady state check prior to skip processing lacp pduSteven Luong4-29/+31
In a rare event, we may be skipping processing lacp pdu's when the it is not in steady state. Type: fix Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: I3595d22dbff8a97dce9fb4d4452d2051bcf6f523
2019-10-23devices: vhoost cpu->copy array overflow on tcp jumbo frame (65535 bytes)Steven Luong2-2/+8
We reserve 40 slots in cpu->copy array prior to copy out to avoid overflowing the array. However, 40 is not enough for the jumbo frame because desceiptor buffer len is likely at 1536. Change the reserve to 200 and add ASSERT to avoid encountering the same problem in the future. Type: fix Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: Ibf0c03c4b4f33e781d5be8679ccd6c3a4b4a646d
2019-10-23memif: memif buffer leaks during disconnecting zero copy interface.Changqian Wang1-0/+36
code added to free the zero copy interface rx/tx queue buffers during disconnecting. As ddc9eb4 find the last official solution introduced core in ut. This does not. Type: fix Signed-off-by: Changqian Wang <changqwa@cisco.com> Change-Id: I971ee164e6d4331a85feb9e65d6702d771c86985
2019-10-23cdp: re-enable skipped tests for python3Ole Troan2-7/+10
CDP uses the running sytems host name, which caused different failures on different systems. The root cause was an python3 specific error in checksum calculation. Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: I205436682d46e7e8cbb8c057c03a76dbbcab4d72
2019-10-23avf: improve timeout handlingJakub Grajciar2-19/+47
Type: feature Change-Id: I8fa1d691ef7bc51ae5c44c344195207ce7d0a2e7 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-10-23sr: add "set sr encaps hop-limit" commandIgnas Bačius6-2/+75
Default hop-limit for the encapsulating IPv6 header is a compile-time constant. Add ability to specify custom hop-limit, in order to avoid packets being dropped with "hop limit exceeded in transit" response in certain network configurations. Type: feature Signed-off-by: Ignas Bačius <ignas@noia.network> Change-Id: I77f2b35c987cfd31801dc2744d31fb3c1984158f
2019-10-23gtpu: msg id fix in send_gtpu_tunnel_details apiMiklos Tirpak1-1/+2
Type: fix _vl_msg_id must start at msg_id_base. Signed-off-by: Miklos Tirpak <miklos.tirpak@gmail.com> Change-Id: Id3f05683c873fcac47667a9736e45e85849b740c
2019-10-23papi: fix default handlingOle Troan2-40/+51
The BaseTypers object were reused, so a default for anyother mesage would be inherited in new messages. Type: fix Fixes: 85465588b18fef9c4712f864f512e00741e2d4f2 Change-Id: Ie1efb85a76b088653eb9ea4b88540c98b6b0aad0 Signed-off-by: Ole Troan <ot@cisco.com>
2019-10-23tcp: improve rate samples for retansmitted segmentsFlorin Coras4-91/+202
Type: fix - Initialize max_seq on both transmitted and retransmitted segments - Keep track of segments that have been sacked. - Track new data segments sent during recovery Change-Id: Ice55231a3da200ae6171702e54b2ce155f831143 Signed-off-by: Florin Coras <fcoras@cisco.com>
2019-10-23tcp: fix sack retransmit beyond snd_nxtFlorin Coras2-2/+13
Type: fix Ensure that sack retransmit logic does not try to inadvertently send new data. Change-Id: Idfda19643577d9c1b58e2af8d8283cabfbaf98e6 Signed-off-by: Florin Coras <fcoras@cisco.com>
2019-10-23rdma: build: fix ibverb compilation testBenoît Ganne1-5/+3
Type: fix Change-Id: Ib6389ecbcf4a1b7bae25b2bd9e7fbdec49545aaa Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-10-22vppinfra: make coverity happy with vec_set_lenBenoît Ganne1-1/+6
Coverity gets confused by ASSERT((l) <= vec_max_len(v)) when l is 0. Type: fix Change-Id: I247d7015b148233d8f195bcf41e9a047b7a21309 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-10-22tests: quic add big stream extended testsDave Wallace1-10/+65
Type: test Signed-off-by: Dave Wallace <dwallacelf@gmail.com> Change-Id: I6c5bdfd934a2c96c410c36c2bc090ee47b679bea
2019-10-22tests: test tls casehaiyanx1.zhang1-0/+145
Type: feature Signed-off-by: haiyanx1.zhang <haiyanx1.zhang@intel.com> Change-Id: I071f5face0d489dc967cce1edcffbc1f8fac5c7e Signed-off-by: haiyanx1.zhang <haiyanx1.zhang@intel.com>
2019-10-22vcl: handle segment map errorsFlorin Coras1-8/+12
Type: fix Change-Id: Ibd122a4565c067627c4bbc8cac7df2d5b6497392 Signed-off-by: Florin Coras <fcoras@cisco.com>
2019-10-22vcl: add config option for preferred tls engineFlorin Coras3-1/+11
Type: feature Change-Id: If6c095c9b737cb524a9232dcfa9be0f93f04d114 Signed-off-by: Florin Coras <fcoras@cisco.com>
2019-10-22tests: enable vpp_echo to run in gdbDave Wallace3-7/+37
- Enable vpp_echo to be run in gdb when running 'make test DEBUG=gdb-all' Type: test Signed-off-by: Dave Wallace <dwallacelf@gmail.com> Change-Id: I79a69b0573c01900535078d7493d52b417350815
2019-10-22tests: DEBUG=gdb[server]-all to debug worker(s)Dave Wallace2-13/+74
Type: test Signed-off-by: Dave Wallace <dwallacelf@gmail.com> Change-Id: I0264451632c1ce780b38a2c15a7e34350fc6d521
2019-10-22vppinfra: add clib_mem_free_sBenoît Ganne3-12/+12
IPsec zero-es all allocated key memory including memory sur-allocated by the allocator. Move it to its own function in clib mem infra to make it easier to instrument. Type: refactor Change-Id: Icd1c44d18b741e723864abce75ac93e2eff74b61 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-10-22ikev2: fix GCM cipherFilip Tehlar5-117/+183
Type: fix Change-Id: I382499061ff4b1c2cc1b70ebbf9725ff0e1be325 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2019-10-22ip: reassembly: avoid corruption in vnet bufferKlement Sekera1-17/+18
Avoid corrupt next_index in vnet_buffer by moving input and output variables into different memory places instead of sharing a common space. Type: fix Fixes: de34c35fc73226943538149fae9dbc5cfbdc6e75 Change-Id: I34471fc6d0c8487535fac21349e688f398934f6d Signed-off-by: Klement Sekera <ksekera@cisco.com>
2019-10-22gbp: missing contract hash-mode settingNeale Ranns1-3/+5
Type: fix Change-Id: Ia0f1e88b43e861d3f6965076c73cc48fb9574da3 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-10-18ipsec: fix tunnel protection removalFilip Tehlar1-1/+1
Type: fix Change-Id: I4d5546d1f9b3a162291997f6f0c094c5c3d6cf31 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2019-10-22ip: ipfix-export API updateJakub Grajciar6-108/+121
Use consistent API types. Type: fix Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com> Change-Id: I5b03e5de111c3a3b8da4e9f02cba0aa99e3ee9f3
2019-10-22cdp: disable failing tests for python3Ole Troan1-0/+6
scapy in python3 does not seem to allow creating invalid protocol packets. Suggest the maintainer rewrite the invalid tests so they also work for python3. In the mean time they are disabled. Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: I554d57528422c98c6df4ba76eeae38c03f512a38
2019-10-22build: add missing ldflags to exe and sharedBenoît Ganne1-0/+2
Type: fix Change-Id: I859bc6ebc574ab09fd70b45f8c911769d00e7acf Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-10-22vppinfra: add vec_set_len()Benoît Ganne3-10/+19
l2-flood and bier nodes reset vector length without updating it to its effective size. Introduce a helper to do it (this allows ASAN to keep track of the new vector size). Type: refactor Change-Id: I2d652550c440f0553a2b49c3ee3d37b49ebc16c3 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-10-22tests: python3 changes for dns testssnaramre1-1/+1
Type: fix Change-Id: Ia81c60d469b29606d9988d7d9ed1e133e6af7158 Signed-off-by: snaramre <snaramre@cisco.com>
2019-10-22flowprobe: tests support python3Ole Troan1-12/+8
Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: I7425147e864467e4f94cee2a82ef74a894339471
2019-10-21tls: enable tls engine as the default engineYu Ping1-1/+1
OpenSSL TLS is well maintained and many issues are fixed, and it makes OpenSSL as the default engine will be more friendly to users if app does not configure a specific engine such as http_static Type: fix Change-Id: I37499af1edd40ffb53b00436044d1fce3b43348d Signed-off-by: Yu Ping <ping.yu@intel.com>
2019-10-21geneve: tests support python3Ole Troan1-1/+1
Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: I0ff4d58c181b2bdf483b8b039ad005c2a4915aa8
2019-10-21bonding: tests support python3Ole Troan1-2/+2
Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: I6cedb43af4437fdabce75f4a845629c5c2f96f6a
2019-10-21ip: test support python3Ole Troan1-33/+33
Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: I9c66bce900f78e5fbd435515df94e327ad25c3c6
2019-10-21l2: tests support python3Ole Troan2-2/+2
Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: Id17bcb65d7eb27f865fc7872b3e485c09f1d29a7
2019-10-21acl: l2 classify test support python3Ole Troan1-2/+2
Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: I3b2e57e3dcf04ae50724b5909272b083d6003a85
2019-10-21ipsec: tests support python3Ole Troan1-4/+4
Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: Id13da9371c71c10c12a0120ec89ba21c1ca47524
2019-10-21classify: tests to support python3Ole Troan2-5/+12
Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: I8af6ee6e5239f0836978baa063a18a01c610279f
2019-10-21bier: tests support python3Ole Troan2-9/+10
Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: I3cf5295f1a85579a66ba38ca1f74678b45474959
2019-10-21quic: Add PICOTLS_INCLUDE_DIR var to CMakeLists.Mathias Raoul1-0/+6
Type: fix Change-Id: I10ebcc653491d11ca798e0a60be6eeef82c41766 Signed-off-by: Mathias Raoul <mathias.raoul@gmail.com>
2019-10-21tests: add PID of VPP under test to API dump filename for the testAndrew Yourtchenko1-1/+2
Some testclasses (e.g. IPSec) have methods with the same names, this causes a race when running in parallel to save the API and move it into the test's directory - the name of the file has only the test method name as a discriminator. Saving two traces from two VPP instances "succeeds", in that it silently overwrites the file. But only one mv operation works - the other gives an error "file not found" and fails the test. Solution: add the PID of VPP under test to the API dump filename, this way the filenames become guaranteed unique and the race is avoided. Change-Id: I1bb47ed73369fea0f1bfbf907588a51e2cabfb7f Type: test Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2019-10-21ip: reassembly tests python3 supportOle Troan1-16/+13
Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: I990d8d521c128e8d4f482e30b3a49cbc11b632d1
2019-10-21session: support registration of custom crypto enginesFlorin Coras3-1/+22
Type: feature Change-Id: I888d415ff645b3827df7d4cfb0d3c5f4ac940617 Signed-off-by: Florin Coras <fcoras@cisco.com>
2019-10-21vcl: add api to set lcl ipFlorin Coras5-7/+43
Type: feature Change-Id: I40169fbbe8a20670dd612c341b6c78b5c925bf74 Signed-off-by: Florin Coras <fcoras@cisco.com>
2019-10-21dhcp: python3 support in testsOle Troan2-40/+53
Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: Ie136c1e94e5c25f9547fc2d6d45ce8e1630a035c
2019-10-20vlib: linux: fix wrong iommu_group value issue when using dpdk-pluginYulong Pei1-22/+19
When VPP work with dpdk-plugin, linux_vfio_main_t->container_fd is always -1 since it never have chance to run open("/dev/vfio/vfio") to get the fd. But this lead to a potential issue of VPP, that is, when start VPP without uio-driver field setup in /etc/vpp/startup.conf, VPP will run to automatical select uio driver in vlib_pci_bind_to_uio() and the function depend on iommu_group value to decide to work on vfio or vfio-noiommu mode. Since in vlib_pci_get_device_info() have the condition container_fd != -1, so the iommu_group value will be always -1 at this scenario, this caused that VPP mistake to run with vfio-noiommu driver on intel_iommu=on state. Actually in order to get iommu_group and iommu_group/name value, no need to depend on linux_vfio_main_t->container_fd value, so the fix remove the condition lvm->container_fd != -1, then it can get the correct iommu_group value. Type: fix Change-Id: I3f162fc4971b9a2b8717205f8f3b52e30c5e5b69 Signed-off-by: Yulong Pei <yulong.pei@intel.com>