Age | Commit message (Collapse) | Author | Files | Lines |
|
don't do the setup and teardown in class methods so that with
each test the config is added and deleted. that way we test that
delete actually removes state.
more helpful error codes from VPP for existing IPSEC state.
Change-Id: I5de1578f73b935b420d4cdd85aa98d5fdcc682f6
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Adding "Mtrie mheap usage" in output of "show ip fib memory" command, for displaying the total Mtrie Mheap usage together with memery usage of each node and each table
Change-Id: I2bcc570924e44a2b406f69cfc2f2f8d5abb61a39
Signed-off-by: Lollita Liu <lollita.liu@ericsson.com>
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
As a FUD reduction measure, this patch implements 2-way parallel
counter collection. Synthetic stat component counter pairs run at the
same time. Running two counters (of any kind) at the same time
naturally reduces the aggregate time required by an approximate
factor-of-2, depending on whether an even or odd number of stats have
been requested.
I don't completely buy the argument that computing synthetic stats
such as instructions-per-clock will be inaccurate if component counter
values are collected sequentially. Given uniform traffic pattern, it
must make no difference.
As the collection interval increases, the difference between serial
and parallel component counter collection will approach zero, see also
the Central Limit theorem.
Change-Id: I36ebdcf125e8882cca8a1929ec58f17fba1ad8f1
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: I9df96264e30806ac3daf7121f314f34f06232413
Signed-off-by: Damjan Marion <damjan.marion@gmail.com>
|
|
It is actually a bitmap....
Change-Id: Ie359e085df3f371512f773600f8d7460b2232b3e
Signed-off-by: Damjan Marion <damjan.marion@gmail.com>
|
|
Change-Id: I2e5fd45abcd07e9eda6184587889bdcd9613a159
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
We register callback for VNET_HW_INTERFACE_LINK_UP_DOWN_FUNCTION and
VNET_SW_INTERFACE_ADMIN_UP_DOWN_FUNCTION to add and remove the slave
interface from the bond interface accordingly. For static bonding without
lacp, one would think that it is good enough to put the slave interface into
the ective slave set as soon as it is configured. Wrong, sometimes the slave
interface is configured to be part of the bonding without ever bringing up the
hardware carrier or setting the admin state to up. In that case, we send
traffic to the "dead" slave interface.
The fix is to make sure both the carrier and admin state are up before we put
the slave into the active set for forwarding traffic.
Change-Id: I93b1c36d5481ca76cc8b87e8ca1b375ca3bd453b
Signed-off-by: Steven <sluong@cisco.com>
|
|
Change-Id: I1c12e2941cae198ededbb65eb5be51a4eabe2c1b
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
1. show packet-generator verbose, display all edit-groups and hdr-size
2. unformat_pg_payload, always mark payload hdr-size as 0
3. packet-generator now can change rate/limit/size at runtime
4. validate_stream checks buffer min-size/max-size against all edit
groups' header size
5. remove incorrect max packet size limit check in validate_stream(...)
Change-Id: Ic45e4f2b98bc0fd7330e0b480dd677fa3c69a677
Signed-off-by: Kingwel Xie <kingwel.xie@ericsson.com>
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: I312beccb1bb6c02d6356bc9b8247178f11b8feb0
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Ib3f030e906da9828fdad27e19b9efb0c349b0734
Signed-off-by: Brian Nesbitt <brian.nesbitt@owmobility.com>
|
|
Change-Id: Ic141162acaf39878ab978a997e3f6757d4f7c240
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I975d46a82e9f884a9cd0ac2bd5f57181695f4124
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Ieadf0a97379ed8b17241e454895c4e5e195dc52f
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
exceeded
Change-Id: Id5b47f78521a0cbedf7bd2c72babfb2ffe9fa67d
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I92af6455b50a49de4c912737fcd3b7787dd31de0
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
allow routes that are local and connected to be added via the API.
this emulates the addition of a second address in the same subnet
added to an interface.
Change-Id: Ib18a08c26956be9a07b3360664210c8cf6734c84
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I6e96607f09c18755eead2c7099e1f546bdae7b88
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
The latest version moved to lark from pyparsing. The developers were
kind enough to verify that their new grammar works with our tests.
Change-Id: I260b7e4641f6e283862f706c1e52199e28facc5c
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Change-Id: Idbbe5996a5749733a904433b57cba7ab63fdbbcb
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Ica88268fd6a6ee01da7e9219bb4e81f22ed2fd4b
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I46ec5ba03d61c1fe0aba92f649f43746b5292cc3
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Change-Id: Ib8ddce2d56034152a390ca2d3b9784673a77d2e3
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Ib27c43a561dd000f8361ff732e76c6297a7ba900
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I980b76fb766d5734d4e822409a11ed09a06108a6
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I84dfdbb727fb765fcaa7fb0099cbdd7ef7dbcc10
Signed-off-by: Filip Varga <fivarga@cisco.com>
|
|
Subclasses of (unittest.TestResult|unittest.TextTestResult) must implement an empty constructor.
The standard python library unittests depend on the empty constructor.
Change-Id: I6d1bd2e7d6996d85a9da66cb7d40af0ed3c30e2b
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Change-Id: I8cd782bb36a4c063afa312002192c254fd51bf5e
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I81b686cc1911c2ff52ead15c8199bdf9430fe59b
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Ib5e4a850e127dda51318ffe82ef2622b980bc947
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Accessing priority causes a recursion error.
Change-Id: Ic8cc5c9e198b7da955bc24ea116e9826004cad5e
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Change-Id: I7609a7b173cbfc1de10b346cc8075bca5a40ef3a
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Change-Id: Id7fccf2f805e578fb05032aeb2b649a74c3c0e56
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
show interface
Name Idx State MTU (L3/IP4/IP6/MPLS) Counter Count
local0 0 down 0/0/0/0
pg0 1 down 9000/0/0/0 rx packets 582
rx bytes 34051
tx packets 4
tx bytes 364
drops 323
ip6 1
(nil) 580
----
show interface
Name Idx State MTU (L3/IP4/IP6/MPLS) Counter Count
local0 0 down 0/0/0/0
pg0 1 down 9000/0/0/0 rx packets 582
rx bytes 34051
tx packets 4
tx bytes 364
drops 323
ip6 1
mpls 580
Change-Id: I3dcde4799764277535baf42f855e4e8bb48c0d02
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Change-Id: I0fcf3385cc4fb96f000b84d5f880f74131c0d60f
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
The 'example' keyword triggers the creation of very out-of-context
example in the "Examples" top level of documentation. Rename the
keyword in the comment so the comment is still readable, but
does not trigger the doxygen.
Change-Id: Iecbdc236918f9178a034817aa6cea7ab6b2c1654
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
(cherry picked from commit 1705599efe5eec09c09d2214da776d92d0e4f1cf)
|
|
Change-Id: I5bbd44fb1ce5923350bcf1a42b1d85131eaa3747
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Icd21f456089c72c91a8328f963bf47a8c7725195
Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
|
|
Change-Id: I428bd25a513eb9fe65bea56572fea8cab7c51681
Signed-off-by: Filip Varga <fivarga@cisco.com>
|
|
Change-Id: I10596335c7e8f51afc4bcee75132b7a25ebf2a4e
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Subclasses should accept **kwargs to ensure compatibility as the
interface changes.
https://github.com/python/cpython/blob/master/Lib/unittest/runner.py#L133
Change-Id: Ia64ffd88899d207a5422f066700d2f7f9c77622e
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
as this node is refactored in new style with
vlib_buffer_enqueue_to_next, we have to check if the 'count'
is greater than 0. otherise, the next_index would be invalid
then lead to a crash
Change-Id: If7c323b59c02b5c16bd9d77b65c946512cc972c1
Signed-off-by: Kingwel Xie <kingwel.xie@ericsson.com>
|
|
Change-Id: I998658ad7860b23425444e218ce2e1ec655b885a
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I0ba5175be077c40556f2a3ce629c5bbcd71e0a81
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I5fe01e918b534d1ac1d47f0d7610536f45c3158c
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Ia083050389853c25b069f0f8286d50d3f4aef527
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I3bb1d9f83dd08f4b93acd4a281bfec0674e39c2e
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: If88ccd965122b9318a39a8d71b53334cd1fd81e4
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Ifede85d3af36f3ee6c6f8f92dcf5db0ed8f1bfeb
Signed-off-by: Damjan Marion <damarion@cisco.com>
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: Idb2839f6082bd2e052be2bc5417f0ebb43d1c0a6
Signed-off-by: Michal Cmarada <mcmarada@cisco.com>
|