summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2018-09-26forget to assign spd_index to configKingwel Xie1-0/+2
Change-Id: I35dcb987edf11097f34a633ac36d87cecd12088f Signed-off-by: Kingwel Xie <kingwel.xie@ericsson.com>
2018-09-26japi: Move Java API binding to cmakeMohsin Kazmi7-386/+258
Change-Id: Ia7ddd9f9e2e2d9c133967593c3e187fe42501eac Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2018-09-26rpm: Fix the spec file to look into right directoriesMohsin Kazmi2-4/+4
Change-Id: If526e9f17226d7c371a8a98b9ac932196dab547a Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2018-09-26mismatch bi0 and b0 when finalizing ip reassembly.Kingwel Xie2-0/+2
bi0 always points to the first buffer in chain but b0 could be any fragment in a ip packet. It causes a vnet_feature_next function call to the wrong buffer and crashes sometime when there is >1 feature nodes under ip-unicast. The fix is simple, makes b0 and bi0 both pointed to the first buffer Change-Id: I7de36e68fb42b050fa63201abd98aeb6ba2e0cd3 Signed-off-by: Kingwel Xie <kingwel.xie@ericsson.com>
2018-09-26dpdk: fix QSFP+ module infoDamjan Marion1-1/+2
Change-Id: I89c7df778e66a5d2147190dc99445405d81964e5 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-09-26Modify return values of L2 bridge API handlersAlexander Chernavin2-1/+23
Change-Id: Ie6a6dde1fdc0e4fa8560682072a69876867a88d3 Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
2018-09-26NAT44: endpoint-dependent mode session timeout improvement (VPP-1423)Matus Fabian2-0/+28
Change-Id: Ib62e503f4eb5d72431288de32f417a4553df4e0c Signed-off-by: Matus Fabian <matfabia@cisco.com>
2018-09-26bond: tx perf improvementsDamjan Marion4-220/+173
Change-Id: I0c3f2add35ad9fc11308b7a2a2c69ffd8472dd2e Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-09-26itf: dump interface rx-placementMohsin Kazmi4-1/+228
Change-Id: I7dd48c8a2c77f82a2c1aa8311b062f5f0bc4e3fd Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2018-09-25FIB: recusrive paths must lock the table to prevent its deletionNeale Ranns2-0/+9
Change-Id: I958bf057be751dc7b3a0d93080021b3addc405b7 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-09-25L2 BD: introduce a BD interface on which to send UU packetsNeale Ranns29-110/+649
Change-Id: I21ad6b04c19c8735d057174b1f260a59f2812241 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-09-25MPLS tunnel dump fixNeale Ranns5-6/+29
Change-Id: I9d3d5243841d5b888f079e3ea5dc1e2e8befd1dc Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-09-25dpdk: show pluggable info in 'show hardware'Damjan Marion4-21/+78
module: id SFP/SFP+/SFP28, compatibility: 40g_active_cable vendor: Amphenol, part NDCCGF-I202 revision: C, serial: APF1711202351C, date code: 170318 cable length: 2m Change-Id: Ife35607b4f078f7b56737fe066ad4cbd247a7504 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-09-25BIER; bi-dir to/from underlayNeale Ranns8-59/+141
set and check a special RX interface value as the packet enters and exits a BIER domain Change-Id: I5ff2f0e2d1b3ce0f3598b935f518fc11eb0896ee Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-09-25acl-plugin: optimize session idle timer checksAndrew Yourtchenko5-32/+93
This commit adds explicit signaling from a non-owning thread to the owning thread to restart the session timer as necessary. Consequently, we now can sweep the session lists at their respective timeouts, rather than sweeping all the lists at the pace of the shortest timeout value, just taking care to wake up if the session requeue to a different list results in needing to wake up earlier. Change-Id: Ifc8c500f6988748f4cd3dc184dd7824321aaaaca Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2018-09-25dpdk: add patch to fix 25G AOC cable detectionDamjan Marion1-0/+30
Change-Id: I6b54d4c7767a20b875b5bc05f23a7ac15cb9fbcc Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-09-25UDP-Encap: fix coverity found errorNeale Ranns1-0/+1
Change-Id: Idbe5f4d7f37dbe4dbf8d2679c3d816aeaed148d8 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-09-25tcp: accept rst+ack in syn-rcvd stateFlorin Coras1-0/+2
Change-Id: I49da8be88dd033aae1b190e8e2163069ef480442 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-09-25tcp: add option to cfg max rx fifo sizeFlorin Coras4-11/+23
Change-Id: Icff3d688506e7658330db004c58bcfcac273fcec Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-09-25Enable verbose output during VPP cmake compilingLijian Zhang1-0/+3
During VPP compiling, the command “make build-release V=1” gives verbose output on dpdk part. This is to enable verbose output on vpp part, with CMAKE_VERBOSE_MAKEFILE:BOOL=ON passed to cmake. It would help to get more cmake compiling information. Change-Id: I2b01c8e234beb3189fe401801ff339f224c14470 Signed-off-by: Lijian Zhang <Lijian.Zhang@arm.com> Reviewed-by: Honnappa Nagarahalli <Honnappa.Nagarahalli@arm.com> Reviewed-by: Sirshak Das <Sirshak.Das@arm.com>
2018-09-25bond: crash when deleting bond interface [VPP-1427]Steven1-2/+5
After the slave interface is removed from bond, bond input node still receives traffic for the slave interface. We have to disable feature arc for the corresponding slave interface. Change-Id: I44e7001e6685e290b032c48147d02911a55d547b Signed-off-by: Steven <sluong@cisco.com>
2018-09-25vmxnet3: guard against array overflowSteven1-2/+3
Under extreme condition, it is possible for input node to have more than 256 packets available to process. Add a check to the while loop to prevent overrun buffer_indices and nexts. Change-Id: Id9830e5c254f04216eb79e864a5460e08cf2e4e5 Signed-off-by: Steven <sluong@cisco.com>
2018-09-25NAT44: fix nat44_o2i_ed_is_idle_session_cb (VPP-1424)Matus Fabian2-4/+1
Change-Id: I47e1fc789ddf3dbfdf9768b99d5c3a8804d6b750 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2018-09-24NAT44: endpoint-dependent mode session timeout improvement (VPP-1423)Matus Fabian5-27/+73
Change-Id: I630f3da1ea4e6e50a50f1352c097becef1efe3c0 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2018-09-24Add the sphinx docs build optionsjdenisco4-9/+46
Change-Id: If7ac5b41ca4ac602a100b616b37d07f658fd6a90 Signed-off-by: jdenisco <jdenisco@cisco.com>
2018-09-24nsim: fix multiple definitions of nsim_nodeDamjan Marion2-3/+1
Change-Id: Iedd79eeba35fb7385c03a177f8ac7d3ddfeb6a84 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-09-24svm: march svm_fifo take 2Florin Coras2-71/+46
Change-Id: Ifa4fceef7edbe43d444790a624957db0817064de Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-09-24avf: rename interface nameDamjan Marion2-2/+2
Change-Id: I4a1dca92a69547f8b26e9aec7574332f39e43c37 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-09-24ARP: don't use RPC for requests initiated from the main threadNeale Ranns2-114/+87
Change-Id: If833680149eb33db6adc836c5330f350042869f4 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-09-24Network delay simulator pluginDave Barach10-0/+1523
Change-Id: I4a70c7df8f0cb368a4e1cb16f30eeef5c6058c79 Signed-off-by: Dave Barach <dave@barachs.net>
2018-09-24Trivial: Clean up some typos.Paul Vinciguerra120-249/+249
Change-Id: I085615fde1f966490f30ed5d32017b8b088cfd59 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2018-09-24LB: fix flush flow table issueHongjun Ni5-69/+90
Change-Id: Ib0a06ab71aed42eb5bb2ab2edf4844b2167e0610 Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
2018-09-22vcl: remove vcl_eventFlorin Coras8-1062/+0
Change-Id: I0f805ae47f6e9465070a54d85f164bc74877af01 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-09-22fix following error in debian jessie:Khers1-3/+6
'‘for’ loop initial declarations are only allowed in C99 or C11 mode' Change-Id: Id842382f884122555abaa936c56cdfd305f2a5f3 Signed-off-by: Khers <s3m2e1.6star@gmail.com>
2018-09-21vmxnet3: Add hardware link status handlingSteven6-8/+66
Added an interrupt line for monitoring and notifying hardware link status Displayed additional information for show hardware for vmxnet3 interface Fixed possible garbage display on interface name for show vmxnet3 Change-Id: If457bfe7c216287fb3a4e2630f00434d595f387b Signed-off-by: Steven <sluong@cisco.com>
2018-09-21add: nasm and ipsec-mb into vpp-ext-deps packagingDamjan Marion17-399/+549
Change-Id: Ie5d85af84ae0d8b15edf5962213ed1b1953bee2f Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-09-21Fixed japi/java/Makefile.am so the JAR for NSH plugin builds as well.Tibor Král2-1/+21
Change-Id: I15b3e51d6e0206f4a387eb2ce764914167149385 Signed-off-by: Tibor Král <tibor.kral@pantheon.tech>
2018-09-21NAT: Refactoring / Housekeeping (VPP-1415)Matus Fabian19-10848/+11482
Change-Id: Ia3ce24cc94f9b2fb331ad62a4181ddcd41bc78ca Signed-off-by: Matus Fabian <matfabia@cisco.com>
2018-09-21Add more CLI options to vpp_api_test for calling ip_add_del_routeJohn Lo2-5/+17
Change-Id: I114e93b6bc71cfcdcfe6d3ddde26f77118e36ab8 Signed-off-by: John Lo <loj@cisco.com>
2018-09-21tcp: accept fin-ack in syn-rcvd stateFlorin Coras1-1/+3
Change-Id: Ibe57abc7d2a06be80146ce28edf4c60ecda991eb Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-09-20vhost: show vhost may display garbage after the interface nameSteven1-2/+3
DBGvpp# show vhost-user Virtio vhost-user interfaces Global: coalesce frames 32 time 1e-3 number of rx virtqueues in interrupt mode: 0 Interface: VirtualEthernet0/0/0�?x�D (ifindex 3) The fix is to use format_vnet_hw_if_index_name rather than hi->name. The former format the name with %v rather than %s Change-Id: If4d275e1eb249cf87b2d6b796b42f24769f9e3e3 Signed-off-by: Steven <sluong@cisco.com>
2018-09-20bihash template: avoid memory leak upon rehashAndrew Yourtchenko1-0/+3
Call the BV (value_free) when we have performed the rehash and thus no longer need the memory that old value for the bucket refers to. Change-Id: Ibb82174fc8002aeb3e1a6c8d1f90293d73bc45d8 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2018-09-20rename vpp-dpdk-dev to vpp-ext-depsDamjan Marion26-141/+133
We need to have new tenants in the development package. This is first of series of patches which will allow us to have multiple external libs and tools packaged for developer's convenience. Change-Id: I884bd75fba96005bbf8cea92774682b2228e0e22 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-09-20UDP-Encap: name counters for the stats segmentNeale Ranns13-232/+165
change the ADD api so that is returns the 'ID' that can be used by the client to read the stats from the stats segment and to delete the object. Previously a similar value used required to be chosen by the client, now VPP allocates one (like it does e.g. for interfaces) Change-Id: I563cf6092276eb990c52d5457c86e72546bcf69e Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-09-20SR-MPLS: MPLS table checks (VPP-1422)Neale Ranns1-0/+17
Change-Id: I397715ea8c1966f5ee61128f284d62d875c568e1 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-09-20session/svm: add want_tx_event flag to fifoFlorin Coras7-51/+59
Have applications use explicit flag to request events from vpp when it transmits from a full fifo. Change-Id: I687c8f050a066bd5ce739d880eaec1f286038d95 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-09-20Route counters in the stats segmentNeale Ranns12-88/+216
route ADD API changed to return the stats segment index to use to read the counters Change-Id: I2ef41e01eaa2f9cfaa49d9c88968897793825925 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-09-20vhost-user: Add disable feature support in apiMohsin Kazmi6-3/+42
Two flags to disable mergable rx buffers and indirect descriptors are added to api. Change-Id: Iba0ee9c48d19dfc3d3420a3fdaf44a1a1d325e99 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2018-09-20NAT44 virtual fragmentation reassembly for endpoint-dependent mode (VPP-1325)Juraj Sloboda7-163/+1814
Change-Id: I36ece2ef2eaef9fa559d69ec7f7f07e7c16a7a9d Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
2018-09-20vmxnet3: invoke vlib_buffer_enqueue_to_next() with the wrong buffers for ↵Steven1-7/+8
chain buffers If we invoke the subject API with 2 buffers, each with 2 chains, the content of buffers[0] should be head of 1st buffer, and content of buffer[1] should be head of 2nd buffer. What the code did was to put buffers[0] = head of 1st buffer buffers[1] = next chain of 1st buffer buffers[2] = head of 2nd buffer buffers[3] = next chain of 2nd buffer This is wrong and can cause crash. The fix is to only increment bi when the entire packet is found which may consist of multiple fragments. Change-Id: If02cd5186a039d7a6c08a0959112840bdb242317 Signed-off-by: Steven <sluong@cisco.com>