Age | Commit message (Collapse) | Author | Files | Lines |
|
Change-Id: I66ca0ddea872948507d078e405eb90f9f3a0e897
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Iaecf8c060e1337d8c362ad9a9be2bb9701664397
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Minor clean-up in the home gateway use-case documentation
Change-Id: I7d3aaea8cec62248daf7814b21a8acb574ac12a1
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: Ia68db22b917e9af1394c00e5a6b3df134bfd1568
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I9f238b6092bc072fd875facfee5262c6b155043e
Signed-off-by: jdenisco <jdenisco@cisco.com>
|
|
requests 2.18.4 is the subject of a security alert
Change-Id: Id1e9338d86bced8c0bb065db7b3dc7f02aa41afc
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: Ia9b74761ce511d218bb5319c7c9b5e58be3e2e8a
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Fixes debug build crash.
Change-Id: Ia5c5da82beda5992f9e67456af9a4676b9b82722
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Ibef46e068cd72415af28920b0146adf48105bf68
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Change-Id: I93c6b7bccd1a1ab71625ae29c99c974581186c4d
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I2eafac4ce810fe53454b729d81161ec80d036db7
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I7531a64d7072d85514ca579827b6ea0e9cef6f08
Signed-off-by: Vijayabhaskar Katamreddy <vkatamre@cisco.com>
|
|
Change-Id: I4921054b4e42bac3442d399681b21b613ce8b681
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
when the last interface is removed from l2 in the bonding group, we should
invoke ethernet_set_rx_direct to allow ip packets to go directly to
ip4-input.
Change-Id: I43b3cd64e2c119762edd0c295bb9348732adab45
Signed-off-by: Steven <sluong@cisco.com>
|
|
Change-Id: I34cc55d8292a69fb451ed0031484994f51d3537a
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Ie4c5cfc4c97acb321a46b4df589dc44de1b616ba
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I77af4f3a7e826ea5c1a23ee8b348faefe9f2facc
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
length in ip4 header could be 0, when the length edit is fixed
this happens if length is not specified or size is specified as, f.g., 100-100
As a result, tcp and icmp would get a negative value for checksum calculation
Change-Id: I55fa1f5e95717ea4149cb3b8c9b73caf88ae7f98
Signed-off-by: Kingwel Xie <kingwel.xie@ericsson.com>
|
|
stream->max_packet_bytes
This length is the payload length, and will impact the ip length
when ip length is not specified. iplen = header_len + payload_len
SO, better to make it comply with max_packet_bytes
Change-Id: I8b0f7485e29fcaccae656f2d03b3b5e614300fb8
Signed-off-by: Kingwel Xie <kingwel.xie@ericsson.com>
|
|
f.g., gtpu4/6
Change-Id: I8bb1dc5fd2fba89ff17ec069a9816bafb9684190
Signed-off-by: Kingwel Xie <kingwel.xie@ericsson.com>
|
|
clang will emit a warning when the wrong enum type is passed to a
function whose arguments are an enum type. free bug finding...
Change-Id: I62215d8ef22c7527a31272e31f5d190e4e762e53
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
There are different flavors of vmxnet3 device, esxi server, vm fusion, vmware
workstation, and vmware player, that we need to communicate with. Each of
them also has different versions. We really need the control plane logging
to debug when things don't work as expected.
Change-Id: I53c23cf10958bfbc06abb1c252d368003563cd04
Signed-off-by: Steven <sluong@cisco.com>
|
|
Change-Id: I6e43953a6ad1bd672e69d8377d18bd9614b469d8
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Current mlx5 requires libmnl, and SUSE has a bug which
installs the header file in incorrect location.
Workaround (from upstream) is to use pkg-config.
Change-Id: Iadfd2dc0df211876258c31da028af2e8934483b3
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
|
|
Thread 1 "vpp_main" received signal SIGSEGV, Segmentation fault.
0x00007ffff670da53 in cj_dump_one_record (r=0x7ffff50f0fec)
at /home/sluong/vpp3/vpp/src/vlib/unix/cj.c:138
138 (long long unsigned int) r->data[1]);
(gdb) p *cjm
$1 = {tail = 58645908, records = 0x7fffb64646ec, num_records = 512,
enable = 1, vlib_main = 0x7ffff6953240 <vlib_global_main>}
(gdb) p /x cjm
$2 = 0x7ffff6953880
(gdb) p /x *cjm
$3 = {tail = 0x37edd94, records = 0x7fffb64646ec, num_records = 0x200,
enable = 0x1, vlib_main = 0x7ffff6953240}
(gdb)
cjm->tail is a 64 bit counter, not the total number of records. Dumping from
0 to cjm->tail can be a very large number of records which go beyond the
limit. I believe we meant to dump from 0 to index. index has been set by
this statement
index = (cjm->tail + 1) & (cjm->num_records - 1);
Change-Id: Ie1a8ba757598de9757accc1488577c15aa49726b
Signed-off-by: Steven <sluong@cisco.com>
|
|
Change-Id: I3a47c71ad3e35df47d11fed6db95019a45f3015f
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Thanks to Damjan for rewriting my previous patch into
not-to-be-deprecated soon form!
Change-Id: I595a13c44ed07d4c6d60e2aef0f0bd807a76cbba
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Patch to fix a bug in the ENA PMD on starting a port that
had previously been started and stopped. There was a
failure to allocate descriptors on start because they had
been allocated during the initial start and not released
when the port was stopped.
Issue reported/tracked at
https://github.com/amzn/amzn-drivers/issues/86
Change-Id: Id9c8d598929f0561788b985011fe5dea8f4a21a5
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Change-Id: Ia108b0359cb2dc4ba2e773117ee7134274a98056
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Change-Id: I49cb5863237e4f9d2ac94879577d5d011e3bfe97
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I4ebd977672090f2a7fc08bb139832df39614564a
Signed-off-by: Scott Keeler <skeeler@cisco.com>
|
|
Some L2 traffic requires promiscuous mode enable on the interface
Change-Id: Icbb2792aaf0d9d1c51373e46ae5049ff0d986863
Signed-off-by: Steven <sluong@cisco.com>
|
|
This reverts commit 71615399e194847d7833b744caedab9b841733e5.
There seems to be an issue with ARPs when running with multiple workers.
Change-Id: Iaa68081512362945a9caf24dcb8d70fc7c5b75df
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Without pagemap access only way to do DMA to physmem is by
using IOMMU. In such case VFIO will take care for preventing
paging of such memory so we don't need to lock here.
Change-Id: Ica9c20659fba3ea3c96202eb5f7d29c43b313fa9
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
I was expecting "%4d" format string to exhibit the same behavior as
the one in C standard library, but rather than specifying _minimal_
width and expanding as necessary, it actually truncates the output.
Changing that to "%9d" should take care of pushing this surprising
difference in behavior into the domain of impossible.
Change-Id: Ia687137ca765bf9c1575af998ff11314010e81ad
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Avoid possible null pointer dereference
Change-Id: If8023edb43aaf037234f4a7b5f191cb23b09c74d
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Change-Id: Ie7827b6a31968a355687d27325c0f30cab1bc890
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Change-Id: If570bb8cc19b2eab5877a20c963e27e410ee7560
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Ic69a68665dcff4e4d48803b634aa2cf234c3944b
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I91c9d040fc9b9b63f7109eeaac334c47fb1226cf
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Iad2ddf63116a6f477c6106a3e045fe36f34bc062
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
Change-Id: Iecceffe06a92660976ebb58cd3cbec4be8931db0
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Fixed consistancy between the first classifier match and the
next_table_index classifier matches:
- CLASSIFY_ACTION_SET_METADATA was applied only for the first
classifier, but it was not applied for the other classifiers
- Actions should be performed only for input ACLs
- Payload should point at the IP header for output ACLs
Change-Id: Ifbd7791756320ae3198520c41902f5e99e3d40b4
Signed-off-by: Gregory Thiemonge <gregory.thiemonge@enea.com>
|
|
Change-Id: I010528055b9d0597b087882146496eacc13b7daa
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Adds tx pacing infrastructure for transport protocols that want to use
it. Particularly useful for connections with non-negligible rtt and
constrained network throughput as it avoids large tx bursts that lead to
local interface tx or network drops.
By default the pacer is disabled. To enabled it for tcp, add tx-pacing
to tcp's startup conf. We are still slightly inefficient in the handling
of incoming packets in established state so the pacer slightly affect
maximum throughput in low lacency scenarios.
Change-Id: Id445b2ffcd64cce015f75b773f7d722faa0f7ca9
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
frame->frame_flags
Change-Id: I56b573b5da04a27766bcbcafbd5438555424f2e7
Signed-off-by: Kingwel Xie <kingwel.xie@ericsson.com>
|
|
According to the RFC 4096 (section 3.3.1) the DATA chunk needs to be
padded to a boundary of 4 bytes with zeros. This patch addresses that
requirement.
At the same time, this patch takes care of adding some hardening for
corner-cases where the transmitted tag could be wrong.
Change-Id: I3b653926e9933d0d3d46bc5f37eaceefd932e874
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
The license issue is resolved, so we can package the .json
files. Added to the vpp-dev package in .tar.xz form, which saves a lot
of space.
Updated the perfmon error log entry: tell folks where to find the
compressed tarball, and how to extract it.
Change-Id: I3ed351fbf154cc3ba22d5f9c666acff77a2a14cf
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: I88577615bfd3cddca834a7b881979ab32bfd5574
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Abstracting out the internal format function
for L4 session key type makes the other
acl plugin format/print functions more maintainable.
Change-Id: Ica1302263a42981555462b5338d18d9a9f9c8342
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|