Age | Commit message (Collapse) | Author | Files | Lines |
|
Change-Id: I105375c653b1a1dce8f0f71005b281ff137c6f42
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: Icb858414145db0e5fef495e155903b3b935e50ba
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: I1552e1418b704fdf1f1fa2c0174313b9b82a37a3
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
loop code
The dual loop within the L2 classifier processes the (n, n+1) packets,
the prefetching was trying to prefetch (n+1, n+2) - thus half of the
prefetches were not used - because the next iteration needs (n+2, n+3).
Change-Id: I827d20845dbdd0dcdcf463ee25661a7921428992
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Packet trace initiated by dpdk-input node would occasionally
not fully function if next node is ip4-input.
Change packet trace saving order in the quad-loop so "sho trace"
will display trace in packet receive order.
Fold calling of vlib_trace_buffer() into dpdk_add_trace().
Change-Id: I9d7a9bf3b9391f95590e66150b26b0b15912d803
Signed-off-by: John Lo <loj@cisco.com>
|
|
Add a binary API and debug cli to enable/disable cdp. cdp is disabled
by default.
Change-Id: I307c7e38dfda38e36ff3325f65de7036c34d89b1
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
DPDK rte_cryptodev_socket_id() is returning zero for QAT devices.
Apply DPDK patch where correct NUMA node can be obtained with pci_dev->device.numa_node.
Change-Id: I1c7a77bb13e2db8615189e97b67d68d043127787
Signed-off-by: Lee Roberts <lee.roberts@hpe.com>
|
|
Linux kernel and DPDK recognize the following Ethernet speeds:
10M, 100M, 1G, 2.5G, 5G, 10G, 20G, 25G, 40G, 50G, 56G and 100G.
Add consistent Ethernet speeds to VPP.
Change-Id: I4cfcf378fb34425c1206db5aa2f6bdcc66e0a6ab
Signed-off-by: Lee Roberts <lee.roberts@hpe.com>
|
|
Use (u64) cast to ensure proper address calculations.
Change-Id: I6bad50010b140189f1b0af177e55da0045bd7a93
Signed-off-by: Lee Roberts <lee.roberts@hpe.com>
|
|
Change-Id: Ic59355683b581945d10a2df97d9b2deae87a998e
Signed-off-by: Keith Burns (alagalah) <alagalah@gmail.com>
|
|
Change-Id: I806cbf8c6c49643fe6c317bcceab93c1b9d441ab
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Ie8d3bcb9021d9272bd27dba35d30e5081023f061
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
Change-Id: Ie2e8f4ec3a7ec1018e5f9ca6f28f8cb18beaa814
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
frag packet can't get reass.
adding bihash,it can rewrite new hash value.
so need to delete hash after compare hash value.
Change-Id: I83b5c47890110e9a598b78cfbe8fcd27bbe291bb
Signed-off-by: ahdj007 <dong.juan1@zte.com.cn>
|
|
- support both pipe and uniform modes for all MPLS LSP
- all API programming for output-labels requires that the mode (and associated data) is specificed
- API changes in MPLS, BIER and IP are involved
- new DPO [sub] types for MPLS labels to handle the two modes.
Change-Id: I87b76401e996f10dfbdbe4552ff6b19af958783c
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Ie8b4effbd25e1e26b625d451ec059bac58a5a5a1
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
- added vce_get_event_handler()
- added check for event before blocking on mutex in vppcom_session_accept()
Change-Id: I8e19ea5fcbaa40279cb28152b9923ca8f1328670
Signed-off-by: Keith Burns (alagalah) <alagalah@gmail.com>
|
|
- add infra for pluggable tls "engines"
- makes mbedtls specific code a plugin
Change-Id: I2c5b099e2b69d2be0038e3ef02b208ff907727e7
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
- simplified event handling and unregister
- removed fixed need to bit flip event hash key
- added spinlock for client_session_fifo (was using sessions_lockp)
- removed redundant vars
Change-Id: I3c7645da660fb5560efdc4e9347e105df9650a16
Signed-off-by: Keith Burns (alagalah) <alagalah@gmail.com>
|
|
Change-Id: I9de8dd822494abe1b8701a72a9b8bede34dea8dc
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
Change-Id: I3e5e179daa9d6f1c46adb85b05dd810bdd312054
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
The gerrit 10434 which added the support for whitelist model on ethertypes,
did not include the support to dump the current state.
This patch fills that gap.
Change-Id: I3222078ccb1839dc366140fa5f6b8999b2926fd2
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Throw exception if details/reply is not defined instead
of logger warning.
Change-Id: I6eb39c51eecca6521e5f563ba09dfd62311b45ec
Signed-off-by: Marek Gradzki <mgradzki@cisco.com>
|
|
vnet_get_sw_interface shoud be called after sw_if_index is validated.
Change-Id: I36f1d90999c740803386404ba9b32703b659cd54
Signed-off-by: Steve Shin <jonshin@cisco.com>
|
|
Change-Id: Ie0763e20c36a29a8ef866511903c85027dd133c3
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I8f45fdb3865e2e0cbb5162ac622c07fec5e42b9d
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
(VPP-1192)
following is not possible:
set interface nat44 out GigabitEthernet0/3/0 output-feature
set interface nat44 out GigabitEthernet0/3/0
Change-Id: I1592cc18390881fda66f98316700886b8f5295f0
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: I0ff13962ab6855663b9aec31c95e4a88cc809ff0
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
Change-Id: I2a34546f9b32edc9bfb86b5492dde34aaef49ccc
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
- add option to use test certificate in the ca chain
- add hostname to extended session endpoint fields and connect api
parameters. If hostname is present, certificate validation is
enforced.
- use /etc/ssl/certs/ca-certificates.crt to bootstrap CA cert. A
different path can be provided via startup config
Change-Id: I046f9c6ff3ae6a9c2d71220cb62eca8f7b10e5fb
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
One of basic requirements from day one for maek test is that it should
run unpriviledged, so modifying system paremeters is unacceptable.
Disabling script and reassembly tests as they need to be done in
different way.
Change-Id: I063c73eb82f2ebd7499e8adb1574a9fd2475fb5b
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
This ensures that tool changes do not require re-bootstrap.
Disabled generation of temporary files (gentab / .pyc) to avoid polluting the source tree.
Change-Id: I4d6bc035fbb46550fa8f4e99f4091eef90e2d86c
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
The previous use of a dictionary instead of a list led to typedefs being generated in wrong order.
Change-Id: Iee6ff73f920883ce6e599180c1b47fe997c1702e
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Change-Id: If1284696e10df71b4029191b5e3adb32c21c0c5f
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I5f0f3b07a7aa3f243c3d44a9a15cf0670dbb2d46
Signed-off-by: Keith Burns (alagalah) <alagalah@gmail.com>
|
|
Though dst-IP address would be change in LB plugin with L3DSR method,
layer-4 checksum would not be recomputed after this change.
Related changes:
- L3DSR: https://gerrit.fd.io/r/#/c/10203/
Change-Id: I98de7b8d80186ac77608a68050208c08d90b7c3b
Signed-off-by: Yusuke Tatsumi <ytatsumi@yahoo-corp.jp>
|
|
in2out and out2in protocol are not same
Change-Id: I4ce680ad1f088cb079e1f2aeb15ca59225fca0d1
Signed-off-by: ahdj007 <dong.juan1@zte.com.cn>
|
|
Change-Id: I8a4a7a85e86acbfe411e6dfa22e3976d7d4c903b
Signed-off-by: ahdj007 <dong.juan1@zte.com.cn>
|
|
This commit also fixes the acl and arp handle for
inspector to view internal state of VOM.
Change-Id: Ibc8ff6cb51d2a77b4c04993ac7212564b8892337
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
With glibc 2.27 the memfd_create has been added to the devel libraries.
That's causing the internally defined static function to clash with the
system wide one. This patch addresses that issue on systems with latest
glibc libraries.
Change-Id: I788bf49b23d5b5f1cb1c0374e243d8a429178a71
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
Change-Id: Ie7b1c5e50588f65657c3c0900e5914ea82ebb50f
Signed-off-by: Marek Gradzki <mgradzki@cisco.com>
|
|
Change-Id: I0738fac32dd0c5d927c52d2eb2c1100d14c147cf
Signed-off-by: Marek Gradzki <mgradzki@cisco.com>
|
|
Change-Id: I316dc99881bce6a36904863d3c1c049b4f5cf658
Signed-off-by: Marek Gradzki <mgradzki@cisco.com>
|
|
Based on https://gerrit.fd.io/r/#/c/10920/
Updates service definition in stats.api with correct reply message names.
Change-Id: I3282bee5304e667e23bc1fab3f43d967a50d880d
Signed-off-by: Marek Gradzki <mgradzki@cisco.com>
|
|
This reverts commit f7b7fa53b7eaec81d8c00c1023fb7d01f1f9761f.
Change-Id: I87496342943248e94f01ada31459f387c0a3a610
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
We don't need per vlib_main physmem_main, so keep it separatelly instead
of trying to keep them in sync.
Change-Id: I0fbeecf4d9672d31af7a43c640a7d8f05dd6e46f
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
- provides async handling of events such as accept/connect
Change-Id: Id95947237ef16629371b3c99822059d423e2f918
Signed-off-by: Keith Burns (alagalah) <alagalah@gmail.com>
|
|
This patch adds the possibility to configure some behaviors of the SCTP
stack based on some tunable parameters (mainly ON/OFF). For the time
being, that is limited to the bundling option (multiplexing messages)
and to delaying the SACK message.
Change-Id: I696493e0309e47163c1e119c7d9f82f7d8ee6b87
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
- IPv6 link local table is a per-SW interface array of IPv6 unicast FIBs
- the per-interface ocst is sizeof(fib_table_t) which is small,
w.r.t. the cost of an interface
- FE80::/10 in the 'global' table points to a DPO that performs a lookup in the
input interface's LL fib.
Change-Id: Ice834b25ebeeacb2e929d7c864d7ec8c09918cbe
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
dlopen linkage allow more transparent use for Mellanox nics.
Mellanox shared library librte_pmd_mlx5/4_glue.so* placed in LD_LIBRARY_PATH
At run time Mellanox code will be loaded only when Mellanox nics explicty used.
i.e if VPP is used with other vendor Mellanox code is not loaded.
Change-Id: Ib05bdbfc4cbb6e447c67186c98361f9c5b447140
Signed-off-by: Amir Zeidner <amirzei@mellanox.com>
|