Age | Commit message (Collapse) | Author | Files | Lines |
|
If the heap does not have enough space to satisfy allocation
request, the allocator calls sys_alloc(). There, if the request
is bigger than mparams.mmap_threshold, the mmap_alloc() is called
to allocate memory via a direct mmap call.
The resulting allocated memory is properly recognized by
clib_mem_is_heap_object() only for the first such request.
Subsequent requests overwrite the tracking data, resulting
in previously "valid" addresses become invalid, as seen
by clib_mem_is_heap_object(). The result is a misleading
behavior which masks other issues.
This is a temporary change to avoid the affected codepath
until there is a proper fix to track the directly mmap-allocated
memory.
Change-Id: I4137f91b5196d4503c40cf8ecc2f71554bc8f858
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
When 'Symmetric' flag is enabled, it will sort the addresses
and hence, same flow hash will be calculated on both directions.
Change-Id: I5d846f8d0b94ca1121e03d15b02bb56edb5887b1
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Change-Id: I1b76994f674a045f7fce3d61ef2aa5294ddb53a9
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Change-Id: I0e89fbc51f30325655c4e9d0104aceb3ead3b16f
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
This reverts commit 72f0004ac5f6e201cbe042593d76df6f2491d743.
Reason for revert: Traceback (most recent call last):
File "/home/ksekera/vpp/test/test_ipsec_ah.py", line 36, in
setUpClass
super(TemplateIpsecAh, cls).setUpClass()
File "/home/ksekera/vpp/test/template_ipsec.py", line 105, in
setUpClass
super(TemplateIpsec, cls).setUpClass()
File "/home/ksekera/vpp/test/framework.py", line 459, in setUpClass
cls.quit()
File "/home/ksekera/vpp/test/framework.py", line 475, in quit
six.input("When done debugging, press ENTER to kill the "
AttributeError: 'module' object has no attribute 'input'
Change-Id: Idf0bbfea231730b37bae5dcb4557a0f82ab1b810
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Remove methods that only call super.
py27 runtests: commands[5] | stestr --test-path ./test run --slowest test_fib
==============================================================================
FIB Test Case
==============================================================================
==============================================================================
IPv6 Test Case
==============================================================================
12:19:23,856 Couldn't stat : /tmp/vpp-unittest-TestFIB-BcLbkQ/stats.sock
{1} test.test_fib.TestFIB.test_fib [0.216340s] ... ok
==============================================================================
IPv4 Test Case
==============================================================================
{0} test.test_ip6.TestIPv6.test_fib [5.328127s] ... ok
12:19:33,921 Couldn't stat : /tmp/vpp-unittest-TestIPv4-AoGvoK/stats.sock
{1} test.test_ip4.TestIPv4.test_fib [5.071083s] ... ok
======
Totals
======
Ran: 3 tests in 34.0000 sec.
- Passed: 3
- Skipped: 0
- Expected Fail: 0
- Unexpected Success: 0
- Failed: 0
Sum of execute time for each test: 10.6155 sec.
==============
Worker Balance
==============
- Worker 0 (1 tests) => 0:00:05.328127
- Worker 1 (2 tests) => 0:00:10.251002
Test id Runtime (s)
------------------------------- -----------
test.test_ip6.TestIPv6.test_fib 5.328
test.test_ip4.TestIPv4.test_fib 5.071
test.test_fib.TestFIB.test_fib 0.216
______________________________________________________ summary ______________________________________________________
py27: commands succeeded
congratulations :)
vagrant@vpp:/vpp$
Change-Id: Ia07fe13affe2672ea2df774678312c6db8ea63fb
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Add the ability to specify a specific python library version
based on the interpreter/platform/etc.
Change-Id: I027acdf22ad839b5cff63b319f0aa100b0f336c8
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Do not use locals() for string formatting.
Change-Id: I2e811f479198159b4005fa69c09ad903944d8ae3
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Change-Id: I39b5a8e368f0e0b5c83203141d01f22d909b6f9d
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Raw input does not exist in python3 use six.input.
Change-Id: Ie461696ff869057bcc3969a7571602dde570f5b8
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Use six.reprlib. Uses repr for python 2 and reprlib for python 3.
Change-Id: Ia343a492d533bd511ed57166381e10a37e452d36
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
When a command fails, CalledProcessError is raised. testing with except: masks other failures.
Change-Id: I7e3a6739411cb6a4c13e96dd123aff9159213fea
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
... to map vpp node names to dissector handles.
Wireshark has an easy-to-use string to dissector function handle
hashing scheme, so use it. Thanks to Guy Harris for writing up the
incantation.
Change-Id: I6c1eb609332b0afe87154ba447a98f783e13ca68
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
fixes a problem seen when dhcp proxy uses vlib_buffer_chain_linearize
function which tries to vlib_buffer_alloc zero buffers - which succeeds
if the buffers vector is initialized but otherwise crashes when trying to
update the _vec_len in vlib_buffer_alloc_from_free_list
solved by initializing the free_list buffers vec
Change-Id: I1186d7aac05e54864d72f3f144e1bef8064f8efa
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
first argument of a classmethod should be named 'cls'
Change-Id: I1462be1edbfd42cbc6ad3f93d73f23b70d95e70c
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
first argument of a method should be named 'self'.
Change-Id: Iab84a333baba9b9dfb6ffd6da66df4da331a6b11
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
test_lisp.py No longer needs the external dependency to run.
py27 runtests: commands[6] | stestr --test-path ./test run --slowest test_lisp
==============================================================================
Basic LISP test
==============================================================================
{0} test.test_lisp.TestLisp.test_lisp_basic_encap [0.487960s] ... ok
======
Totals
======
Ran: 1 tests in 18.0000 sec.
- Passed: 1
- Skipped: 0
- Expected Fail: 0
- Unexpected Success: 0
- Failed: 0
Sum of execute time for each test: 0.4880 sec.
==============
Worker Balance
==============
- Worker 0 (1 tests) => 0:00:00.487960
Test id Runtime (s)
--------------------------------------------- -----------
test.test_lisp.TestLisp.test_lisp_basic_encap 0.488
______________________________________________________ summary ______________________________________________________
py27: commands succeeded
congratulations :)
vagrant@vpp:/vpp$
Change-Id: I35b35f8ddaed79066b3ed62fa0460c9ea83273c2
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Should be less expensive...
Change-Id: I678a39e42a054bf5f6ef9c59d0fb93ff9719b964
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
build extended binaries, vom & friends when test*-all targets are run,
remove unneeded test-ext target (which is semantically same as
test-debug-all)
Change-Id: Id710e061fdc93e286a4ed91be6a0cdcf75a2dafd
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
The pipe used for sending keepalive messages was being added to an
instance of KeepAliveReporter and then used by the class itself. This
worked in the past but doesn't anymore. Fix the issue by adding the pipe
to the class instead of an instance.
Change-Id: If7cdca2de23ca78448e80569b155e9e29e81ff94
Signed-off-by: juraj.linkes <juraj.linkes@pantheon.tech>
|
|
When running tests with child processes the logs from child processes
would propagate to root logger, potentially resulting in some logs
being emitted twice. Fix this by disabling log propagation to parent
loggers in child processes.
Change-Id: I31eb265c2b7f7bceff627043956a67d6def3da2b
Signed-off-by: juraj.linkes <juraj.linkes@pantheon.tech>
|
|
Overlaping range of BDs.
Change-Id: I96d2caf98b94206cd6b145961819720727f13c61
Signed-off-by: Pavel Kotucek <pavel.kotucek@pantheon.tech>
|
|
Change-Id: I1bbad8716b9be3f2413aaebd400887c1e2aa3c7a
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Fix the trivial use-before-check copypaste error.
There was a more subtle issue with that patch that Coverity didn't notice:
namely, vec_validate(v, len-1) is a terrible idea if len happens to be == 0.
Fix that.
Change-Id: I0fab8b1750e9e9973eefb5d39f35e4c3a13fc66f
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Change-Id: Ib673f8059f47d8e2e86ad810a354ddf630f557cf
Signed-off-by: Yulong Pei <yulong.pei@intel.com>
|
|
The permission for the top-level vpp_papi dir under
/usr/lib/python2.7/site-packages is set to 644 which means that
non-root users cannot import vpp_papi. As a result, devstack setup
with VPP/networking-vpp fails since it is run as non-root user.
Change-Id: Id85b468b2dcc92efb3a64c51ffb23ef6d596e4ad
Signed-off-by: Onong Tayeng <otayeng@cisco.com>
|
|
Change-Id: I1ed39c4ee084b26faac8286d9729413311ba9508
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I9dbeff51d3ede6db3cd5a097623aa580e5e25042
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I6e6963882825e83d8da3a460be35c7349e107777
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Iab506f127136c94a641df31ded108016de26260b
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: Ic751fecc4a060eedcdb9eaf5d02e1416c838fd63
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
This reverts commit 0ae15ed43aaa600a75ca4c154bc62478820c00b4.
Re-add MAP CE support later. This patch polluted the code
with too many if (ce) ...
Change-Id: Ia0ffd6fdb452aa5d30abec57772c17fc16fb0dbd
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
memory sizes [VPP-1502]
In a couple of places vec_add1()-style was repeatedly called in a loop for
smallish vectors where the number of additions was known in advance.
With a test with large number of ACEs these numbers contribute to heap
fragmentation noticeably.
Minimize the number of allocations by preallocating the known size and
then resetting the length accordingly, and then calling vec_add1()
Also unify the parsing of the memory-related startup config parameters.
Change-Id: If8fba344eb1dee8f865ffe7b396ca3b6bd9dc1d0
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Change-Id: Ia495f8f50c43baf0d6eeb8e9ba04314ce277286f
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: If96f5a7c7e4b511cab3d57e5b57796aa516aff11
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Idda43d1236889ef91d8c37faf98ae23a19de688c
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
This reverts commit c32023b9fd6970ed1cac1b3c7f36233b536d9968.
Change-Id: Ic934d223b10028093b0262e28515bde3ae1ccb71
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Instance method breaking encapsulation by calling a global fn.
Change-Id: Ifde2a207951143764aed75f1b191aed0bac83704
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
This patch addresses intermittent problems we saw in our CI while running parallel tests.
Change-Id: Icb5fdb34cc134e3eb341225d56ab67fbbef80b0d
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Syslog protocol logging transport event messages across network over UDP
protocol based on RFC5426.
Change-Id: Ica74b40bcc2e6d0fbd41e9bf78e76395fbabab3c
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
see README for details
Change-Id: Ida603ccaee21dabc903512699b5b355cebb70320
Signed-off-by: Koren Lev <korenlev@gmail.com>
|
|
RFC7857 section 2.2.
Change-Id: I031af5fe379b72262e83fd8565c34fa1b772f2c8
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: I3555230ef7b7677d6187282fb0c0f02af216e0a0
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I8f88214eab0535573863f31d2c21e2239a811921
Signed-off-by: Pavel Kotucek <pavel.kotucek@pantheon.tech>
|
|
Change-Id: I766c0b2bfd5f781e4fe5df615a7ecd139b7d2cc4
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I8a680be62ab91d2ccb144641981a635506973a49
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I3befc762694e7c6d6847c361a144f72547038ba1
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
See extras/wireshark/readme.md for a quick writeup.
Change-Id: Id48d198aa2f1d643d0587947fe9c3fd62b613a9f
Signed-off-by: Dave Barach <dbarach@cisco.com>
|
|
Change-Id: I56f25d653b71a25c70e6c5c1a93dd9c5158f2079
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: Ida2262238c0558d8340f05c678a84e76f990935d
Signed-off-by: Damjan Marion <damarion@cisco.com>
|