Age | Commit message (Collapse) | Author | Files | Lines |
|
Change-Id: I709e7cf0bb52d8e6cdc9ddb3b7648660204aa3bd
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: I992df2b6ded9533d32f5f936e6d651055061f054
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
- create single-loop version of tests
- update doc strings
- add possibility to log CLI string for logging level "info"
Change-Id: Ibc9e5650b8a33d2ed168a8440c2ae03227be60bb
Signed-off-by: Jan <jgelety@cisco.com>
|
|
Change-Id: Ia140c4750f06870c40b7058c4afb2e20ca633a49
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Change-Id: I2c2df9b5ba567bde2564c924bd9ad2fbbac775c4
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I34c527ba910fb282a95458b78d1d684eb337905e
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
- JIRA: CSIT-255
- create loopback interfaces
- move pg-interface specific arp and neighbor discovery from vpp_interface to vpp_pg_interface
- base configuration of IRB tests
- IP test scenario
Change-Id: I9945a188163652a4e22325877aef008c4d029557
Signed-off-by: Matej Klotton <mklotton@cisco.com>
|
|
Change-Id: I024b8d79cced45cf53a7a912319eca2cc932b10e
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I9c76b6d7ffebeeb92d5eeca5852c487d73151f28
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I9c8a2f5744f322b2bd91c5ae24aeb1279cd11e0c
Signed-off-by: Matej Klotton <mklotton@cisco.com>
|
|
Optimize VXLAN encap node so that vxlan4-encap node is used for IP4
and vxlan6-encap node is used for IP6 underlay. Also stack the VXLAN
encap nodes to the appropriate FIB IP4 or IP6 load-balance node
instead of ip4/ip6-lookup node to save IP lookup operation.
For VXLAN decap node, check VXLAN header FLAGS field for each packet
and remove the code to support decap-next for IP4 or IP6. These decap-
next values were intended for experimentation purposes and not needed
any more since VXLAN-GPE tunnel is supported. The decap-next field is
still kept in API for backward compatibility and its value has no
effect. Decap next for both vxlan4-decap and vxlan6-decap nodes is
always l2-input node.
Change-Id: I8ac95774946549ec403ab691f999df0c006b460f
Signed-off-by: John Lo <loj@cisco.com>
|
|
Change-Id: Ief769c966888094944b7a6b7f26527e7eff6103f
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
An issue is that the server->server_fib_index is overwritten by
some incorrect value on subsequent calls to the function - e.g.
when setting DHCP proxy for the same FIB table several times.
Change-Id: I2e129b47f5c8fe3a0b924a7d71bb83e6fc53e9b5
Signed-off-by: Igor Mikhailov (imichail) <imichail@cisco.com>
|
|
Change-Id: I0379844824b4c2eb42588d0fb8e1a7eb441e923f
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
- update of CSIT operational branch to be used for VPP-patch test
Change-Id: I5e705f4a4d1f843ff0041930399f707e59d01b05
Signed-off-by: Jan <jgelety@cisco.com>
|
|
Change-Id: I110cdc3cc2a26aa36dc250302a6f26db2d884e08
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
device-input feature arc requires that all input-nodes have
nexts in sync. packet-generator tends to call vlib_node_add_next
when new stream is created and that puts nexts out of sync.
With this change all input node are siblings of device-input
node so call to vlib_node_add_next(...) will install same next
to the whole family.
Change-Id: I33d79492e5f30f348af19e527f36fe0222c524d7
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Tarball available at:
http://dpdk.org/browse/dpdk/snapshot/dpdk-16.11-rc3.tar.xz
Change-Id: Ib34f32206d866888c4b5bf6609b8ae53f570daaa
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Ib821e52dac7cd7ee24e6e495916689e23e8b699a
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I06f0cbbbdd29e04a07f1db6807b3e16f1d41e8d2
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Change-Id: If62011e29e912bf0c47625b0d3b3624ef6375013
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Change-Id: Ic0a1479e4a0408a4b93f47e50752d07c2bdccdde
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: I38e476c8080faa5a8647ce6be5a71090e0aa8d5b
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I5f5251ed6b2a39d5e83dd7c702079245ef5f32b0
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Packet tracing for packets sent or received on vhost interfaces
now includes:
- virtio header information
- virtio queue transmit mode (chained, indirect, etc...)
Should be *really* helpful for dealing with the many existing
qemu/driver versions/implementations.
Change-Id: Id0a5d1d671d8b9d3e05691fe13def991b30ee105
Signed-off-by: Pierre Pfister <ppfister@cisco.com>
|
|
New Debug CLI:
packet-generator new {
worker X
}
Change-Id: I71499733a29b49cd36d753d54846d2553af6d024
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
The tuntap punt/inject should be enabled for IPv4/6 RX once any vpp
interface has an IP address.
Change-Id: I4a507b7540b7464ed6d21035ac9b8f9463028c6f
Signed-off-by: Igor Mikhailov (imichail) <imichail@cisco.com>
|
|
Coverity doesn't understand the vector-unit memcpy functions. #ifdef
them out of the way when running a coverity scan.
Change-Id: I312eec1c861c1d3722510d2c121fb5f398fca868
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
From logical point, if first packet is ipv4, and second packet is ipv6.
When first packet failed, the procedure will skip key6_1 setting.
This will lead to second packet's failure.
But here the graph node only process either ipv4 or ipv6 packets completely.
So it is not an issue here.
This patch only make the packet processig's logic clear. It is just a cosmetic change.
Change-Id: I0104ebf2546208d9068000649ce6dccdeeb5aa79
Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
|
|
Change-Id: Ice97940a27c9f4d983d9199d59719d953520fcdb
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Iccae655334b6219d22c325108b0e7f37d1dd68cf
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I62deaaa47a9259c886efa702eb4279c1c481585f
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I0319b45d2e070ee2e20dcf900477fdaadd072aef
Signed-off-by: Maros Marsalek <mmarsale@cisco.com>
|
|
Change spec to add new macros to get rid of relative dir reference and
use vpp version. Store version string in .version to store metadata in
dist archive. New script to create dist archive.
Add dist and wipedist targets to Makefile for builds of source RPMs.
Change-Id: I7cf0164f0cb094ec70f3dc323ed7fa2ee82bd902
Signed-off-by: Thomas F Herbert <therbert@redhat.com>
|
|
Change-Id: Ief37bef8db9f194fe2a75e0eb223a41bc739bc4f
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
sizeof(vlib_frame_queue_t) was 208 bytes so non-zero elements
of array were not aligned with cacheline.
Change-Id: I626615cb64fe9aa86122881a1fff1c5bcca1ec20
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Previos implementation imposed a limit that node can be member of
only one feature arc as feature arc index was stored in node runtime.
Now start node stores index into vlib_buffer_t and feature
nodes are taking it from there.
Change-Id: I252841083bc292af7ed36bf1ac652f2b8c16bfb8
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Fixes DHCPv6 relay reply message corruption.
Change-Id: Iead995f29d2fa9cbb04f0f9d42b3aa9002267117
Signed-off-by: Wojciech Dec <wdec@cisco.com>
|
|
This patch adds multi-queue support to non-dpdk's vhost-user
driver.
Waiting for a unified way to manage threads, this patch
defines a way to assign threads to interfaces that is
specific to vhost.
Change-Id: I86298788b1a4e886c5431f187dc17175d12c7a8b
Signed-off-by: Pierre Pfister <ppfister@cisco.com>
|
|
When using sudo, environment variable such as the PATH
are overwritten.
This patch just checks if user is already root and does
not use sudo in such situation.
This allows using approaches like:
sudo env PATH=path/to/vpp-binary/:$PATH vppctl
Not really important in production setups, but this is handy
for testing.
Change-Id: I079c104d026ae7d378468380b012279a6e5d765d
Signed-off-by: Pierre Pfister <ppfister@cisco.com>
|
|
It works with and without DPDK so it allws us to enable
lawful-intercept code in vpp_lite images.
Change-Id: I08f234cbc652c3ff47a6123a43b9e7f8bdcd5534
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Icd29c9013ae70f5444eb940aff4f08589e755f48
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Produce a user-friendly message if gdbserver is not available, instead
of cryptic exception.
Change-Id: Ia0d99e0488d2ee6e8af764b466dae2639f17ea55
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Change-Id: Idb95888ae6fc7a9df197a919e3d3283f915f4a4c
Signed-off-by: Marek Gradzki <mgradzki@cisco.com>
|
|
vpp by default looks in /usr/lib/vpp_plugins
rpmbuild has ${_libdir} as /usr/lib64
Thus vpp doesn't see the plugins.
Change-Id: Iecbc491940678728305c181b04bb0914ad174bf1
Signed-off-by: Ed Warnicke <eaw@cisco.com>
(cherry picked from commit 2dfd08242d66fb79c9a861c6a0c7fee45ef6bc60)
|
|
Change-Id: I6ebb69443e79e60c7ce6afded6a2d3af85048e6e
Signed-off-by: Marek Gradzki <mgradzki@cisco.com>
|
|
Fixes a gross bug when enqueuing x->x->error-drop or similar
Change-Id: Ie1dc10371de4a265f5131b67cab7a62ed460a1fc
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Properly initialize allocated buffers
Change-Id: Ib2005e605c89a164a4856790db6968fcd7520f5c
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
- Added support in classifier session to identify a flow to be iOAM6 encap/decap
- Sequence number as part of iOAM6 E2E header is created as a plugin.
Change-Id: Ib7605de45aecff25d684d099b525f8dc96ee7038
Signed-off-by: AkshayaNadahalli <anadahal@cisco.com>
|
|
Removed by accident.
Change-Id: Ifebbe99eb2825cb6ee7d33d55cf3c087a9817f72
Signed-off-by: Damjan Marion <damarion@cisco.com>
|