Age | Commit message (Collapse) | Author | Files | Lines |
|
The stats-segment validation/clear logic for acl counters was wrong,
fix it. Also add the code to the unittests to cover that case,
add a vat command to enable/disable counters, clean up
the unnecessary endian conversion and remove the stray clib_warning()
Change-Id: I421297a92e4aeb885c468c72a97cec25981df615
Type: fix
Ticket: VPP-1744
Fixes: f995c7122ba0d024b17bc3232e8edd18d5e25088
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
(cherry picked from commit 4c945dacb9ff9da731301feb26b1edb4ac00e8bd)
|
|
After the trace is collected and if the interface is then deleted, show
trace may crash for the debug image. This is due to the additional check
in pool_elt_at_index() to make sure that the block is not free.
The fix is to do the check in vhost format trace and return "interface deleted"
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I0744f913ba6146609663443f408d784067880f93
|
|
Type: refactor
Change-Id: Iaef9091e1d057110530255e644fad1c298418966
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: fix
The initial config parser passed a pointer to the field algo id field in
tcp main. Because the field is a u8 and it was interpreted as a uword,
it ended up overwrting other tcp configuration fields.
Change-Id: Ie9020051c8fca40e14cf42a9888daa87360e5038
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Add quic_process_one_rx_packet() function
Type: refactor
Change-Id: Iecaec3f7fed9f95a25ea55d0251626beb79181fd
Signed-off-by: Mathias Raoul <mathias.raoul@gmail.com>
|
|
Type: fix
Ticket: VPP-1727
Change-Id: Icfee35c5ab5e1c65079d1ca7bb514162319113e5
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
This algorithm was missed in last improvements.
Type:fix
Signed-off-by: Dmitry Vakhrushev <dmitry@netgate.com>
Change-Id: Ib818cbdcdd1a6f298e8b0086dac4189cc201baa3
|
|
Remove the (unused) node_registration_t, don't try to use it to signal
resolution events.
Type: fix
Ticket: VPP-1746
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: Ice975e32152892ac4100b9e758412d48a43f09f1
|
|
Since vlib_buffer_copy() and vlib_buffer_clone() both preserve
VLIB_BUFFER_IS_TRACED bit in flags field, it should also copy
trace_handle which would add minimal overhead. Thus, callers of
these functions do not have to call vlib_buffer_copy_trace_flags()
to copy trace_handle.
Type: refactor
Signed-off-by: John Lo <loj@cisco.com>
Change-Id: Iff6a3f81660dd62b36a2966033eb380305340310
|
|
Type: feature
If an attempt was made to send an IPv6 packet over an IPv4 tunnel,
the DPDK esp_encrypt did not complete setting up
the crypto operation for a buffer, but still queued the crypto
operations that were allocated. This results in a SEGV when
attempting to dequeue them in dpdk-crypto-input.
Allow IPv6 packets to be sent over a v4 tunnel when using the DPDK
plugin esp crypto nodes.
Change-Id: Ic9a4cd69b7fc06a17ab2f64ae806ec2ceacfef27
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Performant stat segment scraping involves caching the results of
stat_segment_ls (...) and directly fishing counter data from the
shared-memory segment.
To do that, we need to publish several things previously hidden,
declared in stat_client.c:
o stat_client_main_t typedef
o stat_segment_access_t typedef
o stat_segment_access_start inline function
o stat_segment_access_end inline function
Type: refactor
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I3175e3d1f1fd8ea816336a584565179d1972115c
|
|
Type: feature
Expose more configuration parameters and refactor some of the existing
ones.
Change-Id: If44c31ff77ce3d7e8da67d39a4ff61346bdf5ccc
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: test
Change-Id: Ia6dad86d02f6f665a3e6960812b2527eaabb65f1
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
Fixes: 32dcd3b2f227dec638c39ade0c58d6741d83ec30
Change-Id: I42550fcc5b3fa486a05770d3e220d7a86315628e
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
Signed-off-by: Guanghua Zhang <ghzhang@fiberhome.com>
Change-Id: Ifd3abaa5ec912378dbc7b73c4863aad26777dd7e
|
|
Type:fix
Change-Id: I7b5566525fc30fe0d3cc8cd991960f6ed2f1fc27
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: fix
Ticket: VPP-1735
Signed-off-by: Alberto Compagno <acompagn+fdio@cisco.com>
Change-Id: I7063516a60bb211ad91ef04041b2751ca3f6598e
|
|
A previous commit, ca3d38ae18c21ce37212f0d5d5f4a1702429e70c, converts
the vpp-api-python package from a python2 library to a python3 one.
This changes the behaviour of the package and breaks anything that
uses it as a dependency.
This change reverts the package behaviour to a python2 package, and
additionally adds a *separate* python3 package for correct python3
behaviour.
Type: fix
Fixes: VPP-1738
Signed-Off-By: Ian Wells <iawells@cisco.com>
Change-Id: I54eb45156eb6e00fc4cd5b48e7a0aa17fd2f43f7
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Type: fix
Fixes: 21231
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: Iefdd961ba1dcfd0a8d82e5dc1205b3cd4547943d
|
|
Type: feature
Adding a prefix to an interface was not permitted if it overlapped
with another prefix on an interface which used the same FIB.
Loosen the restriction. Allow 2 or more addresses from the same
prefix on a single interface. Reference count the prefix to figure
out when a glean/connected route for the prefix needs to be added
or removed.
Added unit tests to check that the route is only removed when all
addresses in the prefix are removed from the interface.
Change-Id: I1a962ecb5e1ee65fc6d41f98a4cc097a51a55321
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Type: fix
Change-Id: I32d4d4a5de04e89087f4ab4a5c425eda572932a8
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: refactor
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I015390b703ef502b8b41efa08bff45e65b5eed83
|
|
Type: refactor
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I45745e568cd943293d0015a61f67ec799b6804d8
|
|
AES intrinsics use builtins available only with the -maes and GCC 9 just
started to enforce it.
Type: fix
Change-Id: Ia6825ea3eae7191a4bfee47f9fa93fad16ccf76c
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Rely on the migrate callback to move quic connections to follow the
underlying udp connection placement.
Change-Id: Ia1cf3a16187bbe48f5afb3d1f444427f288ff79c
Type: fix
Signed-off-by: Aloys Augustin <aloaugus@cisco.com>
|
|
Make vlib_buffer_copy() preserve buffer flags bit the same way as
that of vlib_buffer_clone() so both are consistent.
Type: fix
Signed-off-by: John Lo <loj@cisco.com>
Change-Id: I6c32aa1e88724b482ce2439d82019e690311b664
|
|
Type:fix
Transports like tcp may notify session layer of a close but they may
defer the connection's deletion (e.g., tcp time-wait). During that time,
transports may still want to send packets. So, unless the session has no
transport (transport-deleted state), allow the transport to send.
Change-Id: I3ae335c7b951ff64be8529a5e3f3ad790feddc84
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type:fix
Also fix transport close while handshake is ongoing.
Change-Id: I004c56d2297d0847c2cb77202f8fba3edaacad29
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type:fix
Change-Id: I5994fb53dc4b9fd58920b3d67472c38b41db27c2
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: test
Change-Id: I4dd685f9acd4d467e0967e6fdd428558ffc8b209
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: test
Change-Id: I1dfbeef08a4f112551450682fc4040820251485b
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
When VPP tries to bind to stats.sock it will complain about non-existing
/run/vpp directory.
/run/vpp is created before cli socket operations are performed.
The same should be done for stat socket.
Ticket: VPP-1708
Type: fix
Change-Id: I53d70939c8125d04a365ac51a6cbf8926dc52adf
Signed-off-by: YohanPipereau <ypiperea@cisco.com>
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
usage: vppapitrace.py [-h] [--debug] [--apidir APIDIR] {convert,replay} ...
optional arguments:
-h, --help show this help message and exit
--debug enable debug mode
--apidir APIDIR Location of JSON API definitions
subcommands:
valid subcommands
{convert,replay} additional help
convert Convert API trace to JSON or Python and back
replay Replay messages to running VPP instance
To convert an API trace file to JSON:
vppapitrace convert /tmp/api.trace trace.json
To convert an (edited) JSON file back to API trace for replay:
vppapitrace convert trace.json api-edited.trace
To generate a Python file that can be replayed:
vppapitrace convert /tmp/api.trace trace.py
vppapitrace convert trace.json trace.py
Replay it to a running VPP instance:
vppapitrace replay --socket /tmp/api.trace
In VPP that file can be replayed with:
vpp# api trace replay api-edited.trace
This patch also modifies the API binary trace format, to include the
message id to message name table.
Change-Id: Ie6441efb53c1c93c9f778f6ae9c1758bccc8dd87
Type: refactor
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Change-Id: Id99f16953a23a4be4cc1fb94419ea8282fa720e8
Signed-off-by: jdenisco <jdenisco@cisco.com>
|
|
When session is owned by another thread, avoid postponing the generation
of the rx event.
Type:fix
Change-Id: Ie6afc8116ce40e83d8aae0432b48e19b31287d8b
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type:fix
Change-Id: I60fdd7651a3d3fac505e7aec7a41f9d096022895
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type:refactor
Change-Id: I37dbc8b55827d66c2578d6ab8b86ed7e18198aa6
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type:fix
Also changes the way the ctx is freed. TLS now waits for tcp delete
notification before freeing the ctx.
Change-Id: I2f606a9ce7b3755ae9d11d6fe714fe11b65dcb98
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type:fix
Change-Id: I1e6f2cb28c1bf544cc3d060b11c8935f9edb0eed
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
socksvr {} should respect the unix runtime directory.
Default is now /run/vpp/api.sock
The 'default' keyword is deprecated.
The user is responsible for creating directories outside of the
unix runtime directory.
Not yet done: Exit VPP when socket cannot be opened.
(currently only process exits).
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I6dd66ed58a3d7e02674dfa16d72c1d7bba07b79e
|
|
Without this the use of uc0 is racy between the current thread and the
thread that owns it and will delete it.
This also ensures we don't trigger a read event on the session before
moving it to the right thread and notifying the application.
Type: fix
Change-Id: Icb1ca3ee5805ea3c0d2d424d4b23511465deb3b6
Signed-off-by: Aloys Augustin <aloaugus@cisco.com>
|
|
Change-Id: Ida11ed3dd70058cb618a7f9c137fde2e1e133a71
Type: docs
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Change-Id: Iee2e28647b966ba8ed9e4fe0e809639fbe8a5756
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
rdma-core-25.0 move some symbol to another library, make sure we link
to it.
Type: fix
Fixes: ec757593859bd8c16839ea8a81a2ef4eb8b29539
Change-Id: I6b8a56ea5fc7787d3de0982015ed47b767557c06
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type:fix
Fixes:4208a4c
Change-Id: I7077788cd14f539b06ead5dc65d8411940438bae
Signed-off-by: Florin Coras <fcoras@cisco.com>
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
Type: test
Change-Id: I0fafaebbb1f70488e0bc7d21da778d55fe15c3f5
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: feature
allow other projects to use cmake modules to find VOM
Change-Id: I00e01e9bec3ecf79903cd522d2770bdb70e5399b
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: test
Change-Id: I48650473591aa181167cf3a86ed2f5da58a81072
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: feature
Change-Id: I1632ff23b1bf6d91aa3406c95ebd6ef0aa595f35
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: feature
Change-Id: I0afc6eb4765029dc28859c9ac2b0578749a38d3d
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|