Age | Commit message (Collapse) | Author | Files | Lines |
|
Now that we have support for f64:
- create explicit types for timestamp(datetime)/timedelta
- update log_details to use timestamp and remove redundant string representation.
If you need the string representation, in python do str(timestamp).
If you prefer the raw f64 value, the client can pass in the
_no_type_conversion option.
Type: feature
Change-Id: I547b5fa7122d2afa12628b7db0192c23babbbae8
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: fix
Change-Id: I35838baea21ead4a3f45d998ff225a513781d7ee
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
In a lot of places within the unit tests pg_start() starts
the capture with an already existing capture running
for the same test.
If the pcap file already exists, then it is renamed and there
is no problem.
However, there is a potential for race if the previous
pg_start() has enabled the capture, but the check for
renaming it happened just slightly earlier than the first
packet has arrived.
Then a second call to pg_start() will hit a check that
a file exists, and will cause an error. This is especially
visible when running the tests in parallel due to increased
load.
Solution: disable the capture before enabling it.
This will flush the aready running capture and eliminate the race.
The additional delay that flushing of the pcap creates has exposed
several other race conditions:
NAT tests: Some of the NAT reassembly tests
verify that the entries were added to the reassembly data structures,
but do so by comparing the quantities of entries. With the default
timeout being 2s, some of the entries might timeout,
resulting in a bogus test failure.
Solution: Bump the timeout to 20s for the affected tests.
Punt tests: nr_packets == 3 makes test intermittently fail,
nr_packets > 3 make it reliably fail, and nr_packets = 2 works
Solution: set nr_packets == 2 for the time being
IGMP tests: the leave-group calls get a spurious packet
from the time the new groups were configured
Solution: add 1 second delay before starting to delete the groups
Type: test
Change-Id: I931182a7b2860cf670e030ee7da8038f6e87356d
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Type: feature
Change-Id: Icb1bd3fce768aebf8919c63a104f771ca7fa1d6f
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
Change-Id: I01eeedf8d5015b07b9422c65afe78bfe8177c22c
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
Ticket: 1729
The flags that are permanently set on a path-list should form part of
its key in the path-list DB. Otherwise, if shared, they will not behave
as expected.
Change-Id: I0aa7c7c5d270c97b08014e4a47ddbdcee2358706
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
Ticket: 1728
Change-Id: I679c2b8c5b0f751c9476db3669ab3f6c26dcdd28
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
Change-Id: I0c9353598d3c9b7ea587ea8a2b6e1faa5454843d
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
Change-Id: I29d24c8ec7b8e0613d4fbf5eedc72384326dc284
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Change-Id: I031a60ac010b55110f32f0a08e19b1156aeda268
Type: refactor
Signed-off-by: Aloys Augustin <aloaugus@cisco.com>
|
|
All instances of test_and_set locks used the following sequence
to release the locks:
CLIB_MEMORY_BARRIER ();
p->lock = 0; // p is a generic struct with a TAS lock
Use clib_atomic_release to generate more efficient assembly code.
Type: refactor
Change-Id: Idca3a38b1cf43578108bdd1afe83b6ebc17a4c68
Signed-off-by: Jason Zhang <jason.zhang2@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Lijian Zhang <Lijian.Zhang@arm.com>
|
|
Type: fix
Fixes: 99536f4
Change-Id: Ica230ec9fa7f6fd36e2754e8b0b9db555460ca55
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
Fixes: c30d87e6139c64eceade54972715b402c625763d
Change-Id: I86b606b18ff6a30709b7aff089fd5dd00103bd7f
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Modified test-and-set spin locks to call CLIB_PAUSE () when spinning
for code consistency. Decreases the memory bandwidth consumed.
Type: fix
Change-Id: I1cca4f87f44f23f257c7a35466cd2e7767072f51
Signed-off-by: Jason Zhang <jason.zhang2@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Lijian Zhang <Lijian.Zhang@arm.com>
|
|
To the sample plugin. We should probably suggest that folks use the
pipeline.h coding model more often. It's really easy, and these days
the performance results are similar to quad-single loop coding.
Type: refactor
Change-Id: Ie2caa087972737e6d9c31c4ac79355f3d8ced282
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Type:fix
Freeing mq messages in vpp (producer), if enqueueing fails, invalidates
consumer assumption that messages can be freed without a lock.
Change-Id: I748a33b8846597bdad865945d8e899346d482434
Signed-off-by: Florin Coras <fcoras@cisco.com>
Signed-off-by: Tal Saiag <tal.saiag@gmail.com>
|
|
Type:fix
Change-Id: I31f35dd86fb6efb04d4a449f7fc834296baaa043
Signed-off-by: Tal Saiag <tal.saiag@gmail.com>
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: refactor
Change-Id: I40518ccddcb78e58f7e6a098c27d9ec53e5a1146
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Add the FIB_SOURCE_INVALID fib source type. This allows to spot
uninitialized fib source more easily (0 no longer means special) and we
can use it as placeholder when no source is present.
Use it to fix FIB_ENTRY_DBG() which was accessing the 1st source, even
when no sources were present.
Type: fix
Fixes: 710071bf0e
Change-Id: I980b6a6a07616d4a8d6f2db166a1dd335721c74d
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: feature
Depends-on: https://gerrit.fd.io/r/20484
Change-Id: Ifc8d7e00d7254db40856a088fdd352d9773f71d5
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Previously, the only option was to wipe/rebuild all the test dependencies.
Type: make
Change-Id: Ia95d6e800f67bef033dcf614dbfa249c3e43159d
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: feature
Change-Id: I72676495a85fbecc946aa266a75234cce70c3a5e
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
SRH has passed WG review in IETF and currently an IESG document.
This patch updates the SRH definition to be compliant with IETF.
- Change "first_segment" to "last_entry"
- Change "reserved" to "tag"
Change-Id: I1765c968671655c5646f6de478d1f7196abbc040
Type: fix
Signed-off-by: Ahmed Abdelsalam <ahabdels@cisco.com>
|
|
Update the sr_localsid code to set the DPO for SRv6 End.T behavior.
Change-Id: I17e102a419eb2b4fdd1de7a672b109e4ff7e1dc2
Type: fix
Signed-off-by: Ahmed Abdelsalam <ahabdels@cisco.com>
|
|
Type:feature
To be used by transports overwriting the connection id.
Change-Id: Ia5dbd9dccc2e3eb62e602514b24882ddc12ff1f2
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: feature
Change-Id: I5e030b23943c012d8191ff657165055d33ec87a2
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type:feature
Change-Id: Ie1ab4b24af9c654d5e0ed94b7fa96ca195b01c56
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: fix
Change-Id: I93c083ee78168ed2da283fe4873ca022766fe861
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: fix
Change-Id: I426e210c47869904a01712b765db2356439f706f
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
Folks need to know that they MUST carefully control the set of plugins
to avoid feeding messages to the wrong binary API message handlers.
Change-Id: Iefeeda6670aae4627446caee21717b847305c9b5
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Type: feature
Control ack generation and retransmissions with session layer scheduler.
Change-Id: Iacdf9f84ab81f44851980aa45a83e75f29be2b7b
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: feature
- Define the ip_dscp_t and use in the IP headers
- Add DSCP setting to the DHCP client for use with packet TX
Change-Id: If220dde0017ea78793747d65f53e11daf23a28fa
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
Fixes: ce3e971
Change-Id: I30bbeced2f5ae7613e65546f2b9b41e2fb514208
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: feature
this means DHCP packets are subject to the IP features configured on the interface
- the unicast packets already were sent throught the adj
- added UT for DHCP client sending a unicast renewal
Change-Id: Id50db0b71822f44bf7cb639a524195cdc9873526
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: style
Change-Id: I7628f7fba8250afe41f115595cca4129e43350d3
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
|
|
Type: docs
Change-Id: I1ee3909e042e56fd4caf3732762e9a9276aa6db1
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
When building out-of-tree plugins, we must search for .api in VPP
installed include directory.
Type: fix
Change-Id: I76b7bace69ff54a385d944313879e2aeb7293648
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
Change-Id: I035ff638d346109e1b3b5e5a8cdd36d650c45e5e
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
Distinguish between closed and deleted states to avoid deleting the
session prior to the transport connection.
Change-Id: Ia285ce94b26a70773f8c0ce9d2c73095d3e2a337
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: fix
Ticket: VPP-1649
Change-Id: Ief77ec8d5f06bfcc63af6454c4cd9979cf0ab49d
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Type: fix
Change-Id: Ic43fb0826907e3f3b42a78bfbd9a807cdbf1e8f9
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: feature
Change-Id: If517d10c318fc17fdbd797fac8d974d9851f6442
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: style
Change-Id: I6c57ab3e71c693de5ecfbdfee118d521a8c9a4c2
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
|
|
When mode == ip, the variable next_index is not initialized.
Although insde the while loop, ni will be fixed to contain next[0],
it is easier to initialize it.
Type: fix
Change-Id: I6653a958bbc5105e7266bf89e3c8569ff00f0199
Signed-off-by: Steven Luong <sluong@cisco.com>
|
|
show interface does not display the RX counters for the bond
interfaces. It displays rx-no-buf instead.
The problem is VNET_INTERFACE_COUNTER_RX is a combined counter,
not a simple counter. Change the code to use
vlib_increment_combined_counter passing it with n_rx_packets and
n_rx_bytes.
Type: fix
Change-Id: I8121ad7e546447049fa13da62481b6c8f5575bec
Signed-off-by: Steven Luong <sluong@cisco.com>
|
|
fixes issue: MEMIF_DESC_FLAG_NEXT persisted when enqueueing
stored buffers
Type: fix
Change-Id: I9e973ed6e0339612fe1dd3e3bd80ed7c05093791
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
implement per-acl-number counters in the stats segment.
They are created during the ACL creation,
the counters are incremented in the dataplane using
the new inline function with the extra parameter being
the packet size. Counting in shared segment adds
a noticeable overhead, so add also an API to
turn the counters on.
Type: feature
Change-Id: I8af7b0c31a3d986b68089eb52452aed45df66c7b
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Type: test
Depends-on: https://gerrit.fd.io/r/#/c/20484/
Change-Id: I140132cfcc4347035fe2bb9919f8e7923342940f
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: feature
Change-Id: I514b40026986f3828c8727453456b20a0a45f3af
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
A waste of binary API trace space; an otherwise idle control-plane
will eventually fill the api trace buffer with them.
Type: fix
Ticket: VPP-1725
Change-Id: Id8338ea4070cd76481595005986efc558f0694e6
Signed-off-by: Dave Barach <dave@barachs.net>
(cherry picked from commit 996a757ff93233379bf0a464dce6d99f5d622ca4)
|