summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2020-02-12crypto-native: use and instead of blendDamjan Marion1-4/+1
Faster and more portable... Type: improvement Change-Id: I915f8d3c45d1ba76ddfdbfac98482b04c98d148b Signed-off-by: Damjan Marion <dmarion@me.com>
2020-02-12crypto-native: add missing static_always_inlineDamjan Marion1-6/+6
Type: improvement Change-Id: Ibfa756f5f489882bc2ac658ae4d238e98da73875 Signed-off-by: Damjan Marion <dmarion@me.com>
2020-02-12tcp: postpone rst handlingFlorin Coras3-71/+133
Type: refactor Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: Id09fa54cc5657b3b5616ea6a6180c1344b0141d4
2020-02-12crypto-native: refactor GCM code to use generic typesDamjan Marion3-291/+325
Type: refactor Change-Id: I76733a9ed362ec60badd22c0fbc2a9c5749da88d Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-02-12api: do not truncate api dump file sizeBenoît Ganne1-1/+1
Type: fix Change-Id: I5c81d2f55057f5fba780cb12154a3fb1aef79f20 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2020-02-11vppinfra: remove the historical mheap memory allocatorDave Barach18-2195/+14
The mheap allocator has been turned off for several releases. This commit removes the cmake config parameter, parallel support for dlmalloc and mheap, and the mheap allocator itself. Type: refactor Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I104f88a1f06e47e90e5f7fb3e11cd1ca66467903
2020-02-11misc: fix coverity warningsDave Barach4-9/+19
Type: fix Ticket: VPP-1837 Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I6b1ea13fc83460bf4ee75cb9249d83dddaa64ded
2020-02-11ikev2: Configure a profile with an existing interfaceNeale Ranns7-30/+141
Type: feature ... rather than always creating a new interface. Change-Id: If8a22ad5a8a3a4e511bea7cab7d8bbf7e6af9433 Signed-off-by: Neale Ranns <nranns@cisco.com>
2020-02-11crypto-native: fix ARM compilatiion flagsDamjan Marion1-1/+1
Type: fix Change-Id: I3b39c17d9cfadc1d383d9c4dba9029ea279d09d7 Signed-off-by: Damjan Marion <dmarion@me.com>
2020-02-11vppinfra: add ARM cpu typesDamjan Marion1-0/+4
Type: improvement Change-Id: Ib2cb708fdcb14fdea9298c10d67f8fe73887f18b Signed-off-by: Damjan Marion <dmarion@me.com>
2020-02-11ipsec: add support for chained buffersFilip Tehlar17-351/+1376
Type: feature Change-Id: Ie072a7c2bbb1e4a77f7001754f01897efd30fc53 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2020-02-11session: avoid scanning new io list under loadFlorin Coras2-21/+51
Type: fix Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: Idaa7cc26ad941be86daec4ed5920727237712f4a
2020-02-11vppinfra: remove unused variable from timing wheelKlement Sekera2-4/+0
Type: fix Change-Id: I77b03efcac04cc46550d03657464ab8de5d7da78 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2020-02-11http_static: VPP web application HowToDave Barach2-1/+275
This sketch should save a lot of time working out uninteresting but important details. Type: docs Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: Icd5705230adfda6539360ef3c46ff3a68b3bed74
2020-02-11sr: update NH value for Ethernet payloadspcamaril12-38/+39
Upon encapsulation of L2 frames, IETF has replaced the NextHeader value from 59 (IPv6 No Next Header) to 143 (Ethernet). https://www.iana.org/assignments/protocol-numbers/protocol-numbers.xhtml Type: fix Signed-off-by: pcamaril <pcamaril@cisco.com> Change-Id: I88aa5590c81d16700ff7a0bbe6337e113179496e Signed-off-by: pcamaril <pcamaril@cisco.com>
2020-02-11tls: refactor picotls ctx_read process to improve CPSSimon Zhang2-58/+55
Type: refactor Signed-off-by: Simon Zhang <yuwei1.zhang@intel.com> Change-Id: I2bb675b4df3c4151f4b0791efcfe05b1d0f87a33 Signed-off-by: Simon Zhang <yuwei1.zhang@intel.com>
2020-02-11svm: numa awareness for ssvm segmentsFlorin Coras4-26/+70
Type: feature Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I999836a7893a89aac5243b111eac35fddd03e2a6
2020-02-11ip: fix ip-local errorsFlorin Coras4-5/+6
Type: fix Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: Ie8bc5c9a03e858487cf565b4e9b520e6b496337a
2020-02-11vlib: Skip core 0 if workers are configured.Jon Loeliger1-0/+15
According to the description in the startup.conf, the assignment of worker threads starts with the lcore following the main_lcore. A non-zero skip_cores will correctly achieve this assignment. However, prior to this patch when workers are assigned, the code picks up and assigns core 0 even thought it shouldn't. This patch determins if a non-zero number of workers are desired and if so, marks CPU unavailable for a worker assignment. Type: fix Change-Id: I1fdf73a6f218dcbf146fda2efc90c553f7cd6d20 Signed-off-by: Jon Loeliger <jdl@netgate.com>
2020-02-11tcp: fix input error countersFlorin Coras1-17/+30
Type: fix Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I87940d02813b66616f1944e41b16c8cc16f5dac0
2020-02-10tcp: add option to avoid endpoint cleanupFlorin Coras2-2/+4
Type: feature If set, avoid trying to cleanup the local endpoint table. Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: Iaa382ae74523d608217d2d17544bf1e7d82b2728
2020-02-10vppinfra: use vm memory allocator for numa mappingFlorin Coras6-50/+21
Type: refactor Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I13b239cd572ae6dfaec07019d3d9b7c0ed3edcfa
2020-02-10ipsec: fix AES-GCM block sizeDamjan Marion1-3/+6
Type: fix Change-Id: I0c9640dab2c0eaba369bc8f3ff7ae56d8e97e170 Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-02-10vlib: properly configure main thread's core idJon Loeliger1-0/+2
Prior to this patch, the main thread's core id was always reported as 0. This patch makes a call to vlib_get_thread_core_socket() on the main thread so that its core id is set properly. Type: fix Fixes: 5d64c7868f67749a6c99eb4ee5998b518ab6c71c Change-Id: I019cb95eec031da25197e48d956038c4bd6b5040 Signed-off-by: Jon Loeliger <jdl@netgate.com>
2020-02-10misc: add FEATURE.yaml filesDave Barach4-0/+47
For src/vnet/classify, src/vnet/cop, src/vnet/pg, and src/vlib/unix Type: docs Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: Ib6ab734608693a1e9562a44808246950616e8d36
2020-02-10sctp: API cleanupJakub Grajciar2-26/+30
Use consistent API types. Type: fix Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com> Change-Id: I344ff299e2a20552450d82064c86aecb4403a71d Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2020-02-10ip-neighbor: fix MLD reports not being sentNeale Ranns2-4/+34
Type: fix Change-Id: I8f81cd6c29ff8cb4f0b4850b8b1f6611d89ddb38 Signed-off-by: Neale Ranns <nranns@cisco.com>
2020-02-10ikev2: better loggingFilip Tehlar5-187/+317
Type: refactor Change-Id: Iedcb24684c54f4d78583ab3aa3db1097e73df248 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2020-02-10ipsec: remove dead codeFilip Tehlar1-29/+0
Type: style Change-Id: Ifda9597bf4aee89cf1dfd287429a2772fed8f535 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2020-02-10ip: more detailed show reassembly commandsVladimir Ratnikov4-7/+33
Options like: expire_walk_interval_ms,max_reassemblies,timeout_ms can be configured via API, but it's impossible to check them using vppctl, but this can be a useful feature Type: feature Signed-off-by: Vladimir Ratnikov <vratnikov@netgate.com> Change-Id: Iac8a96201a7a70b82e9852edc89b819c5d451a58
2020-02-10ip6: fix l4 checksum with hop-by-hop headerMatthew Smith1-13/+23
L4 checksums for IPv6 should be calculated using a pseudo header that includes the source/destination addresses, payload length, and payload protocol. ip6_tcp_udp_icmp_compute_checksum() was using the payload length and protocol from the IPv6 header. If there is a hop-by-hop header (or any other extension header), the payload length used for the pseudo header should only include the upper layer header and payload and not the extension header bytes. Same deal with the protocol, the upper layer next header value should be used instead of the extension header. Type: fix Fixes: cb9cadad57 Change-Id: Ifa2c9ad41c0fc4eea674f0671255b637c8e01f71 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2020-02-08misc: fix the MAKE_PARALLEL_JOBS for 'make verify' targetAndrew Yourtchenko1-4/+2
MAKE_PARALLEL_JOBS was prepending "-j", which in case of nested targets like "verify" resulted in ninja being executed with "-j -j" flags. Solution: prepend -j only at the moment of setting the MAKE_PARALLEL_FLAGS variable, this keeps MAKE_PARALLEL_JOBS intact regardless of depth of the job call tree. Type: make Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com> Change-Id: I10a69fe527758e5a862852a9f2102aeaca30e88f
2020-02-07tests: skip extended quic tests under developmentDave Wallace1-4/+21
Type: test Signed-off-by: Dave Wallace <dwallacelf@gmail.com> Change-Id: I05c464311e98d149f7bc06aa801fd8aefda1959e Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2020-02-07quic: update config values for large stream testsDave Wallace1-84/+88
- Update vpp and vpp_echo parameters to enable large data stream tests to pass. - Standardize stream size nomenclature. Type: fix Change-Id: I929ac9f43ecfccf2c3c3fe4d076761154512fac5 Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2020-02-07build: Makefile dep change for ubuntuEd Kern1-3/+5
Alter dep name and location for ubuntu-20 package naming Dropping 14.04 support while keeping 16.04 and 18.04 Dropping python2-dev for ubuntu-20 Type: make Change-Id: I324aa646cdb6e13d39b7a99722857e59906b0843 Signed-off-by: Ed Kern <ejk@cisco.com>
2020-02-07fib: fix non-NULL terminated vectors in cli outputBenoît Ganne2-2/+2
Type: fix Change-Id: Idbb3f29b13a5c84a8585c4299e51fdfc35f7e1ad Signed-off-by: Benoît Ganne <bganne@cisco.com>
2020-02-07tests: support python 3.8Ole Troan4-8/+7
Make test framework python3 version independence. Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: I1ef1eb77b6c1f422ebc4dad0818f87c8e587b34b
2020-02-07svm: use default SVM address in fifo unit testsBenoît Ganne1-1/+2
Using random addresses can confuse AddressSanitizer Type: fix Change-Id: I44368093f899672ac4d511cc5a01ed87c988e63a Signed-off-by: Benoît Ganne <bganne@cisco.com>
2020-02-07quic: fix coverity warningMathiasRaoul1-2/+1
Type: fix Change-Id: I24aac10a2943151d5b2fe96a0dff1c5beb7340b9 Signed-off-by: MathiasRaoul <mathias.raoul@gmail.com>
2020-02-07 misc: address sanitizer: fix vm instrumentationBenoît Ganne2-0/+9
Type: fix Change-Id: Ifd61c0683c85fe7340965c225ed23e46ec88e01a Signed-off-by: Benoît Ganne <bganne@cisco.com>
2020-02-07nat: api & cli command for forcing session cleanupFilip Varga4-0/+98
Ticket: VPP-1836 Type: feature Signed-off-by: Filip Varga <fivarga@cisco.com> Change-Id: I8f7fc011bac435445a8916a4948d130ca9162f67
2020-02-06hsa: proxy wnd update only if enough space is availableFlorin Coras1-0/+16
Type: fix Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I2874d3afbf4cc89209b605c35ca4a5bc5b6868b3
2020-02-06vlib: add plugin override supportDave Barach7-40/+225
Allow a plugin to override (suppress loading of) other plugins. This mechanism allows a developer to prevent specific plugins from being loaded. To do so, provide an "overrides" list in the plugin definition: VLIB_PLUGIN_REGISTER () = { <snip> .overrides = "avf_plugin.so,ioam_plugin.so,dpdk_plugin.so", }; or some such. Simply list the plugins in question as shown above. The .overrides structure member is limited to 256 octets. The named .elf section mechanism used to discover the vlib_plugin_registration_t's precludes the use of a variable-length array of strings. Use the vlib log to eliminate plugin and built-in vat plugin loader console spew. Added vlib_log_register_class_rate_limit(...) to allow procedural configuration of the log rate-limit. We *never* want to rate-limit plugin loader messages. Type: feature Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I0a9327b8cf5508482f057342783252112cb44170
2020-02-06vcl: fix session closing errorFlorin Coras1-1/+2
Type: fix Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I94f1365569e98d43486d9528faafc6d7c3ad88f7
2020-02-06quic: fix coverity warningMathiasRaoul1-2/+2
Type: fix Change-Id: I7299b3b0a6d32c1cbe213dc1aadb8260cdec8062 Signed-off-by: MathiasRaoul <mathias.raoul@gmail.com>
2020-02-06misc: VPP 20.01 Release NotesAndrew Yourtchenko1-1/+1297
Type: docs Change-Id: Iee518fbb9c72716cc90a3ea8efbf3ecbaa969a84 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com> (cherry picked from commit fce396738f865293f0a023bc7f172086f81da456)
2020-02-05vppinfra: numa vector placement supportDave Barach19-80/+414
Type: feature Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I7e7d95a089dd849c1f01ecea84529d8dbf239f21
2020-02-05build: Makefile dep changeEd Kern1-3/+3
Alter dep name and location for centos-8 package naming Change-Id: I50eb702d0541b658ea98fd3f190ba0de60c3fc49 Type: make Signed-off-by: Ed Kern <ejk@cisco.com>
2020-02-05nat: move dslite to separate sub-pluginOle Troan19-763/+775
Type: refactor Change-Id: If3d9f16f3a06c10b354f1eef674e8db5f3c44de7 Signed-off-by: Ole Troan <ot@cisco.com>
2020-02-05stats: fix state counter removalVladimir Isaev9-98/+178
Avoid using vec_del1() for directory vector to keep indexes valid all the time. There are state counters for each slave in LACP bond mode which can be dynamically created and removed. Vector index is used to access these counters. But also vec_del1() is used to remove counter from vector. This function changes the index of the last element, so after this we are unable to access ex-last element using old index. As a result it is not possible to add-del-add two interfaces to the LACP bond: DBGvpp# create bond mode lacp BondEthernet0 DBGvpp# create packet-generator interface pg1 DBGvpp# create packet-generator interface pg2 DBGvpp# bond add BondEthernet0 pg1 DBGvpp# bond add BondEthernet0 pg2 DBGvpp# bond del pg1 DBGvpp# bond del pg2 DBGvpp# bond add BondEthernet0 pg1 DBGvpp# bond add BondEthernet0 pg2 bond add: /if/lacp/1/3/partner-state is already register Type: fix Signed-off-by: Vladimir Isaev <visaev@netgate.com> Change-Id: I2c86e13905eefdef6233369cd4ab5c1b53d123bd