summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2019-03-29Integrate first QUIC protocol implementationNathan Skrzypczak14-7/+3330
Currently supports on single stream exposed through standard internal APIs Based on libquicly & picotls by h2o Change-Id: I7bc1ec0e399d1fb02bfd1da91aa7410076d08d14 Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
2019-03-29VOM: recurive route update fixNeale Ranns1-2/+2
Change-Id: Iff61904804d8218c4e02897521368f696002343d Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-03-29BVI: coverity error fixNeale Ranns1-1/+1
Change-Id: Idc1e1747035638777240b7ea9afcf675b22be7f1 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-03-29Update MAINTAINERSDave Barach1-5/+1
Change-Id: I1b041edb6f20a9f9c867fb243922985398485054 Signed-off-by: Dave Barach <dave@barachs.net>
2019-03-29ipsec: esp-decrypt reworkDamjan Marion5-214/+317
Change-Id: Icf83c876d0880d1872b84e0a3d34be654b76149f Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-03-29IPSEC: tunnel fragmentationNeale Ranns5-28/+65
Change-Id: I63741a22bc82f5f861e1c0f26a93b5569cc52061 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-03-29tcp: remove sent rcv wnd 0 flagFlorin Coras3-13/+2
Change-Id: If6c672d1caa8884eb5d819311606a79a3de81200 Signed-off-by: Florin Coras <fcoras@cisco.com>
2019-03-29dhcp: only register UDP ports that are neededMatthew Smith3-12/+21
When configuring a DHCP client, both the UDP ports for DHCP client and server are registered. Packets to the server port end up being dropped unless you have also configured a DHCP proxy. This breaks a common home/office gateway use case where the WAN interface gets configured using a DHCP client and devices attached to a LAN interface attempt to configure themselves using DHCP. If you try to punt to an external DHCP daemon to handle the LAN client requests, the packets never make it to the external daemon because of the server port being registered. Modify dhcp_maybe_register_udp_ports() to accept a parameter that controls which ports get registered. For a DHCP client, only the client port is registered. For a DHCP proxy, both client and server ports are registered. Change-Id: I2182d9827e4c7424b03ebb94952c3d2dc37abdb6 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2019-03-29tcp: improve updating of rcv wndFlorin Coras1-10/+7
Change-Id: I0b8a311979d3ccd15f3854e7ac44ca9951dc6ce4 Signed-off-by: Florin Coras <fcoras@cisco.com>
2019-03-29rdma: add option to specify inteface nameDamjan Marion4-2/+12
Change-Id: Ic6244511b88bdd42756f74e3163a70b8014e8547 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-03-28crypto: add vnet_crypto_op_init (...)Damjan Marion5-7/+15
Change-Id: I2018d8367bb010e1ab30d9c7c23d9501fc38a2e5 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-03-28ipsec: USE_EXTENDED_SEQ_NUM -> USE_ESNDamjan Marion14-24/+23
Change-Id: Ib828ea5106f3ae280e4ce233f2462dee363580b7 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-03-28cmake: add vpp_plugin_find_library macroDamjan Marion4-48/+49
Change-Id: I0b996460e05c40e74766563fb2a94c62a65063ce Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-03-28Punt InfraNeale Ranns14-30/+1706
A punt/exception path that provides: 1) clients that use the infra 2) clients can create punt reasons 3) clients can register to recieve packets that are punted for a given reason to be sent to the desired node. 4) nodes which punt packets fill in the {reason,protocol} of the buffere (in the meta-data) and send to the new node "punt-dispatch" 5) punt-dispatch sends packets to the registered nodes or drops Change-Id: Ia4f144337f1387cbe585b4f375d0842aefffcde5 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-03-28ipsec: anti-replay code cleanupDamjan Marion5-206/+158
Change-Id: Ib73352d6be26d639a7f9d47ca0570a1248bff04a Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-03-28session: remove unused tx context fieldFlorin Coras1-1/+0
Change-Id: I4a119937842eb188f5e5a7706cbe70e91ae4def8 Signed-off-by: Florin Coras <fcoras@cisco.com>
2019-03-28Add RDMA ibverb driver pluginBenoît Ganne15-61/+1508
RDMA ibverb is a userspace API to efficiently rx/tx packets. This is an initial, unoptimized driver targeting Mellanox cards. Next steps should include batching, multiqueue and additional cards. Change-Id: I0309c7a543f75f2f9317eaf63ca502ac7a093ef9 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-03-28session: cap max burst to a constantFlorin Coras1-17/+2
Change-Id: I1919d3844936486f04f2bfde24dc7e0d9121927a Signed-off-by: Florin Coras <fcoras@cisco.com>
2019-03-28Avoid overwrite in clib_memcpy_le{32,64}Damjan Marion1-27/+29
Change-Id: Id4a8b6a31fc3e88af2f075cb97c85d3f9b738d9e Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-03-28VXLAN-GBP: format flags in encap traceNeale Ranns1-2/+3
Change-Id: I561fd187b4865345f3bff86b3d6e67b0f0e97557 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-03-28tcp: remove unused buffer flagsFlorin Coras2-23/+0
Change-Id: I86e71f32dee3cc48f680e6432a96caef0a7f66a1 Signed-off-by: Florin Coras <fcoras@cisco.com>
2019-03-28IPSEC: 4o6 and 6o4 for tunnel interfacesNeale Ranns3-47/+141
Change-Id: I4d3ba18ab5205317219989de55b6e50d3b1d8a79 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-03-28IPSEC: fix build breakage from ships in the night mergesNeale Ranns1-2/+6
Change-Id: Iec7da9adc970d005cd7d3d42839b5e51b0b5f5c3 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-03-28vat:ignore SIGWINCH signalezkexma1-0/+1
vpp/src/vat/main.c When change the window size,the vat will get the SIGWINCH signal and then exit. It is not a exit action,so we can ignore it. Change-Id: If796762216910e23cace09406d413331f505d990 Signed-off-by: ezkexma <maqi.z.ke@ericsson.com>
2019-03-28AppImage packagingDave Barach6-1/+165
Disabled by default. To kick the the tires: wget https://github.com/linuxdeploy/linuxdeploy/releases/download/continuous/linuxdeploy-x86_64.AppImage sudo mv linuxdeploy-x86_64.AppImage /usr/local/bin/linuxdeploy sudo chmod +x linuxdeploy-x86_64.AppImage Enable VPP_BUILD_APPIMAGE e.g. in ccmake make build | make build-release The vpp AppImage lands in .../install-xxx-native/VPP-x86_64.AppImage. To run it: ./VPP-x86_64.AppImage vpp unix interactive To run it (as root) and inhale the usual startup.conf: sudo ./VPP-x86_64.AppImage \${HERE}/bin/vpp -c \${HERE}/etc/vpp/startup.conf To run vppctl, or any of the usual vpp binaries: ./VPP-x86_64.AppImage vppctl [etc] Change-Id: Ide8cf4658cbb56f1d36a1ce7fc8f7338f8d38278 Signed-off-by: Dave Barach <dave@barachs.net>
2019-03-28IPSEC: run encrpyt as a feautre on the tunnelNeale Ranns8-158/+333
Change-Id: I6527e3fd8bbbca2d5f728621fc66b3856b39d505 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-03-28Typos. A bunch of typos I've been collecting.Paul Vinciguerra92-274/+278
Change-Id: I53ab8d17914e6563110354e4052109ac02bf8f3b Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-03-27make-test: fix ValueError raised by hook in python3Naveen Joy1-1/+1
Without this patch, the hook module raises a ValueError when tests are run using python3. This patch updates the exception being caught by ipaddress to ValueError. Change-Id: I5e11e292a05ddf350fc04ebaf19cfd7dad2bd9d0 Signed-off-by: Naveen Joy <najoy@cisco.com>
2019-03-27VOM: routes support multipath so set is_multipath in route updateNeale Ranns1-1/+1
Change-Id: Ib0249aec00c8a8306f2cf25394d39b4b7850d8f7 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-03-27GBP: fixes for l3-out routingNeale Ranns11-72/+395
Change-Id: I4d73b712da911588d511a8401b73cdc3c66346fe Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-03-27ipsec: compress ipsec_sa_t so data used by dataplane code fits in cachelineDamjan Marion16-118/+164
Change-Id: I81ecdf9fdcfcb017117b47dc031f93208e004d7c Signed-off-by: Damjan Marion <damarion@cisco.com> Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-03-27tcp: add cc algo lookup tableFlorin Coras2-7/+17
Change-Id: Ie7be0136c182cdc35193e47dd3249153c2f8d65e Signed-off-by: Florin Coras <fcoras@cisco.com>
2019-03-27vom: Add support for BVI interfaceMohsin Kazmi3-2/+120
Change-Id: Ie93f3a2107df0452f7a7436b78c337f482904899 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2019-03-26FIB: do debug before remvoing last sourceNeale Ranns1-2/+2
Change-Id: I4e1cde754eb4d6406cd6cd51f37d89552bdb6a53 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-03-26GBP: missing L3-out type coversionNeale Ranns1-0/+2
Change-Id: Ic6455a930fcb21b055bcf093359bc8328f88140a Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-03-26Add missing OpenSUSE Leap 15.0 build depsBenoît Ganne1-1/+1
Fresh OpenSUSE Leap 15.0 containers are missing build dependencies. Change-Id: I9b62f36c658862d8f32db5547d2176e6f56df4ea Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-03-26ADJ: midchain delegate to performing stackingNeale Ranns11-211/+267
this can be used by e.g. tunnels so it doesn't need to be implemented for each tunnel type. Change-Id: I0790f89aa49f83421612b35108cce67693285999 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-03-26IPSEC: more expressive API errorsNeale Ranns3-8/+10
Change-Id: I517a7bdae03abfea58451819e7854974397d77f8 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-03-26node: vector must be checked with vec_headerKingwel Xie1-1/+1
see register_node, node-name might be a vector Change-Id: I883ec51c1fa9aa4da4ba6cba415a39bb6a4331e1 Signed-off-by: Kingwel Xie <kingwel.xie@ericsson.com>
2019-03-26VPP-1508: Tests: Update version of syslog_rfc5424_parser.Paul Vinciguerra1-1/+1
Bump to version v0.3.1. Fixes an issue with stdlib enum imports under python3.5. Change-Id: I7d8cb9e8ae9321beb4cb2ba052b08e776590c75d Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-03-26crypto: add set crypto handler CLIFilip Tehlar3-8/+135
Change-Id: I40124f8d6e529256b1ccc6eb78dda9c5119b8951 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2019-03-26perfmon: fix pmc hw indices out-dated when multiple pmcSu Wang1-3/+15
When adding two or more events using a single "set pmc", the pmc hardware indices might be out-dated due to kernel reschdeduling the perf_event hardware counters. E.g. set pmc cpu-cycles cache-misses Solution: Open and enable all the events first, then aquire the indices from the kernel. Change-Id: I6913a871ab169e3b2855ac6159f527a1fca343e9 Signed-off-by: Su Wang <su.z.wang@ericsson.com>
2019-03-26ip6-rewrite: bug fix buffer->error in dual loopKingwel Xie2-5/+24
error should be recorded in buffer so that process-error-punt can handle them correctly Per Damjan's comments, move counter to under else clause of last error0==NONE check. Both v4 and v6 are changed. Change-Id: I707c7877ccb12589337155173fc4a5200b42ee93 Signed-off-by: Kingwel Xie <kingwel.xie@ericsson.com>
2019-03-26ipsec: esp-encrypt reworkDamjan Marion10-242/+499
Change-Id: Ibe7f806b9d600994e83c9f1be526fdb0a1ef1833 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-03-26Convert GRE nodes to new buffer APIs and multiarchBenoît Ganne4-618/+594
Change-Id: I3b3c8333287bb704ac7b0bbc81b3dbb059e8d2ac Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-03-26Simplify adjacency rewrite codeBenoît Ganne5-172/+100
Using memcpy instead of complex specific copy logic. This simplify the implementation and also improve perf slightly. Also move adjacency data from tail to head of buffer, which improves cache locality (header and data share the same cacheline) Finally, fix VxLAN which used to workaround vnet_rewrite logic. Change-Id: I770ddad9846f7ee505aa99ad417e6a61d5cbbefa Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-03-26IPSEC: improved policy deleteNeale Ranns1-13/+9
Change-Id: Icdf51b094c34725c079d2e4acbb955744434302d Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-03-25VCL: add TLS opt to socket_test.shDave Wallace4-11/+11
- add TLS transport opt to socket_test.sh - resolve clash in vcl_test* args with socket_test.sh opts Change-Id: I952d5b64942664bc3af1098f67445e0f4b93ab32 Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2019-03-25tls: make first segment and fifo size configurableFlorin Coras2-5/+14
Change-Id: I6169ebdd3ac2d5d77fd2e12068c8aab6d8072c03 Signed-off-by: Florin Coras <fcoras@cisco.com>
2019-03-25IPSEC tests fnd fix or Extended Sequence NumbersNeale Ranns6-44/+278
Change-Id: Iad6c4b867961ec8036110a4e15a829ddb93193ed Signed-off-by: Neale Ranns <nranns@cisco.com>