Age | Commit message (Collapse) | Author | Files | Lines |
|
Change-Id: Ia0f659b810f2c79b1a6c98ce566a86ce413c7448
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Do not translate packet which go out via nat44-in2out-output and was tranlated
in nat44-out2in before. On way back forward packet to nat44-in2out node.
Change-Id: I934d69856f0178c86ff879bc691c9e074b8485c8
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
In version 1 of the protocol sender was always ring producer and
receiver was consumer. In version 2 slave is always producer,
and in case of master-to-slave rings, slave is responsible for
populating ring with empty buffers.
As this is major change, we need to bump version number.
In addition, descriptor size is reduced to 16 bytes.
This change allows zero-copy-slave operation (to be privided in the separate
patch).
Change-Id: I02115d232f455ffc05c0bd247f7d03f47252cfaf
Signed-off-by: Damjan Marion <damarion@cisco.com>
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
Change-Id: I31c6a0a1d11b5b12d8a5c32c29fea9618b1a53d4
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: I6fdb9e7b718c696f7352541f90026cf60f11338f
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
This fixes issue with unaligned vector access on gcc-7.
As udp_encap_t is declared as cacheline aligned, alloc also need to be.
Change-Id: Ic30876911baf2c22c135097490075fa7bcf0ca18
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
- Show interface on which given MACIP ACL is applied
- index is added for show acl-plugin macip acl:
ex) show acl-plugin macip acl [index N]
Change-Id: I3e888c8e3267060fe157dfc1bbe3e65371bd858a
Signed-off-by: Steve Shin <jonshin@cisco.com>
|
|
Add bonding driver to support creation of bond interface which composes of
multiple slave interfaces. The slave interfaces could be physical interfaces,
or just any virtual interfaces. For example, memif interfaces.
The syntax to create a bond interface is
create bond mode <lacp | xor | acitve-backup | broadcast | round-robin>
To enslave an interface to the bond interface,
enslave interface TenGigabitEthernet6/0/0 to BondEthernet0
Please see src/plugins/lacp/lacp_doc.md for more examples and additional
options.
LACP is a control plane protocol which manages and monitors the status of
the slave interfaces. The protocol is part of 802.3ad standard. This patch
implements LACPv1. LACPv2 is not supported.
To enable LACP on the bond interface, specify "mode lacp" when the bond
interface is created. The syntax to enslave a slave interface is the same as
other bonding modes.
Change-Id: I06581d3b87635972f9f0e1ec50b67560fc13e26c
Signed-off-by: Steven <sluong@cisco.com>
|
|
Change-Id: I469a734747099cef2d135d77e4db0244e24bf0bc
Signed-off-by: Dave Barach <dbarach@cisco.com>
|
|
Change-Id: Ib5639981dca0b11b2d62acf2c0963cc95c380f70
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Id09d777c1706c1d613b14b719bcac596194465cd
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: If9d7b266c4b49d4e7810ebc7d18fa154532d0322
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
pair (VPP-1199)
Change-Id: Iad8c626e83bbc58d5c85b6736f5a3dd5bc9ceafb
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
This change makes ip reassembly an interface feature, while adding
concurrency support. Due to this, punt is no longer needed to test
reassembly.
Change-Id: I467669514ec33283ce935be0f1dd08f07684f0c7
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
The interpose source allows the source/provider to insert/interpose
a DPO in the forwarding chain of the FIB entry ahead of the forwarding
provided by the next best source. For example if the API source (i.e
the 'control plane') has provided an adjacency for forwarding, then
an interpose source (e.g. a monitoring service) couold interpose a
replicatte DPO to copy the traffic to another location AND forward
using the API's adjacency.
To use the interose feature an existing source (i.e FIB_SOURCE_PLUGIN_HI)
cn specifiy as a flag FIB_ENTRY_FLAG_INTERPOSE and provide a DPO to
interpose. One might also consider using interpose in conjunction with
FIB_ENTRY_FLAG_COVER_INHERIT to ensure the interpose object affects
all prefixes in the sub-tree.
Change-Id: I8b2737b985f8f7c08123406d0491881def347b52
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
ARP packets need to be allowed for dot1q interface when MACIP is enabled.
Change-Id: I33dd3cb6c6100c49420d57360a277f65c55ac816
Signed-off-by: Steve Shin <jonshin@cisco.com>
|
|
*** CID 183003: Program hangs (LOCK)
/src/vcl/vppcom.c: 2988 in vppcom_session_accept()
Change-Id: I123b73198d305fb0226516942caa410d3647a6bc
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
Change-Id: Iaceaba4dc22341c631c858516b960ce97c4aa564
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I022dc40476ea9c30957b12bf1bd0629c6eb41cda
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I590945fdc1af53208c990a52bbecdc992fd27532
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
Change-Id: I6b125b79bdc560bfb81f307367c844b6a5af6368
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
Change-Id: I7cdc29dd6481242aaace75138cc34e2f5ea76b81
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
Change-Id: I0233b20eb4c7dcb325e15b97a22ecd54200f6fde
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
Change-Id: I7c75da358aff1bd0216a602a49f2909cef5d920d
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
- host mode:
igmp_listen - API to signal that the host has joined an (S,G)
- route mode:
igmp_enable - API to enable the reception of host IGMP messages
igmp_event - API to report the host join/leave from an (S,G)
Change-Id: Id180ec27dee617d33ab3088f5dcf6125d3aa9c8f
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
Change-Id: Ice041610c23563ead13019216516aff23b7775b9
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: Ia2b3350bf8e2c72eee3f33936ba16dd817c75c72
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
- many of the patches fd.io applies in test/patches/2.3.3 are now upstreamed in 2.4
- 2.4 adds support for IGMPv3 which is my main motivation for the upgrade
Change-Id: If2c0a524e3cba320b4a5d8cd07817c6ea2bf0c5a
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I26c5d61bc2f6188bcd4ecac4b5e9385821b0398b
Signed-off-by: Dmitry Vakhrushev <dmitry@netgate.com>
|
|
Change-Id: Iae5532c3d53e208831f3b2782242d9e59d367087
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
After the addition of "qos" cli, "quit" command is not the only match
for "q". Therefore, add a separate "q" cli to avoid ambiguity.
Change-Id: I84f6ddce14ef7d5fa7089537cb62adfecea0e501
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Ie5a50def4ec1e4a3b3404a8b6ab9ec248bc16744
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change vlib_buffer_add_data() so it interprets ~0 to mean please
allocate a new buffer, instead of 0. Fixed a couple of calls to pass
~0 instead of 0.
Zero has always been a valid buffer index, we never happened to
actually use it until recent buffer allocator changes.
The presenting symptom: ASSERT failure when running "make
TEST=test_mpls test-debug"
Change-Id: Ic909913c1d464b3434d6d47e0c58f978806854d5
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: I4b5b60e7c6f618bb935eab1e96a2e79bbb14f58f
Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
|
|
This introduces a startup config option for configuring stats poller delay.
Use `stats { interval <seconds> }` to configure the delay at startup.
The default value remains unchanged - 10 seconds.
Change-Id: If12cb1f7f6f1f8ecfa461561bc77847cdf260388
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Change-Id: I9f487d6033edde09557709f94f97fc8a70246b09
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: I3b1c71b144b4760922a467086fcdb410cd225c57
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Ia10aadc7f969b20e8cd50989230a80e7e21cbff4
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Add API call to send Router Solicitation messages.
Save info from incoming Router Advertisement messages and notify listeners.
Change-Id: Ie518b5492231e03291bd4c4280be4727bfecab46
Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
|
|
Change-Id: I906bbc5bc75279f210093fb9276db9e35ee44c1f
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I9f2a1ba9153ff57958b230a1ba2afeb9df50fd45
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I73ddca5a86e83c9f547778828bb49d2bd4675eaf
Signed-off-by: Keith Burns (alagalah) <alagalah@gmail.com>
|
|
Change-Id: I101a44aa4913bee8d9a1aa37822e8e7e61c7aa1d
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
Change-Id: I6c215858d2c9c620787632b570950b15274c0df2
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Icd491e382a2da0e5d55a673458605bc37e39b669
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Change-Id: Ie07c6f3723312ce88046570dcbe591b72724657b
Signed-off-by: Vijayabhaskar Katamreddy <vkatamre@cisco.com>
|
|
Change-Id: I0860bbd0cf368fc3638b861504ebf642ee9d3807
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I0b1237db541b752393483496ea19dec55799454e
Signed-off-by: Jon Loeliger <jdl@netgate.com>
|
|
Change-Id: I4ec24ffd39f83d9c2d4115e7a06a5eb84a08aae8
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I503d69f902f1c8d3107fb3f2b9f31b0083ebb747
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|