Age | Commit message (Collapse) | Author | Files | Lines |
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I290e4b0dff6afe7ce755074f3aaaf945dbbf3e09
|
|
Type: improvement
There's no need for the user to set the TUNNEL_V6 flag, it can be
derived from the tunnel's address type.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I073073dc970b8a3f2b2645bc697fc00db1adbb47
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I56c4682aef59ed0e69073f9001341c425e65bd48
|
|
Type: fix
two problems;
1 - just because anti-reply is not enabled doesn't mean the high sequence
number should not be used.
- fix, there needs to be some means to detect a wrapped packet, so we
use a window size of 2^30.
2 - The SA object was used as a scratch pad for the high-sequence
number used during decryption. That means that once the batch has been
processed the high-sequence number used is lost. This means it is not
possible to distinguish this case:
if (seq < IPSEC_SA_ANTI_REPLAY_WINDOW_LOWER_BOUND (tl))
{
...
if (post_decrypt)
{
if (hi_seq_used == sa->seq_hi)
/* the high sequence number used to succesfully decrypt this
* packet is the same as the last-sequnence number of the SA.
* that means this packet did not cause a wrap.
* this packet is thus out of window and should be dropped */
return 1;
else
/* The packet decrypted with a different high sequence number
* to the SA, that means it is the wrap packet and should be
* accepted */
return 0;
}
- fix: don't use the SA as a scratch pad, use the 'packet_data' - the
same place that is used as the scratch pad for the low sequence number.
other consequences:
- An SA doesn't have seq and last_seq, it has only seq; the sequence
numnber of the last packet tx'd or rx'd.
- there's 64bits of space available on the SA's first cache line. move
the AES CTR mode IV there.
- test the ESN/AR combinations to catch the bugs this fixes. This
doubles the amount of tests, but without AR on they only run for 2
seconds. In the AR tests, the time taken to wait for packets that won't
arrive is dropped from 1 to 0.2 seconds thus reducing the runtime of
these tests from 10-15 to about 5 sceonds.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: Iaac78905289a272dc01930d70decd8109cf5e7a5
|
|
According to RFC 793, the ACK control bit is always sent once
the connection is established.
Type: fix
Signed-off-by: liuyacan <liuyacan@corp.netease.com>
Change-Id: Id0fe19114a0cc468dbce4c0938b345c2ac339e73
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: If585b9c48f67599c56a8c4b4a5139375bc4287f6
|
|
ipsec4_input_node
ipsec_spd_policy_counters are incremented only for matched inbound
PROTECT actions (:273 and :370). BYPASS + DISCARD actions also have
SPD policy counters that should be incremented on match.
This fix increments the counters for inbound BYPASS and DISCARD actions.
Type: fix
Signed-off-by: Zachary Leaf <zachary.leaf@arm.com>
Change-Id: Iac3c6d344be25ba5326e1ed45115ca299dee5f49
|
|
Type: fix
Signed-off-by: wanghanlin <wanghanlin@corp.netease.com>
Change-Id: Icd2fc3cc2d0a0a6060abfb262044cf9e09ab4ba2
|
|
In stress test case, memset may consume a lot of CPU because
vls_epoll_wait is called very frequently.
Type: improvement
Signed-off-by: wanghanlin <wanghanlin@corp.netease.com>
Change-Id: I9b4e1d6e1c4d7217cf0b2529d8efed792dea7b40
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I3d208f8ef4638e7557929f4b2bca4d640af85baa
|
|
Type: improvement
the rationale being that the del only requires the SA's ID, so it's a
bit mean to require the client to fill out all the other information as
well.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: Ibbc20405e74d6a0e1a3797465ead5271f15888e4
|
|
Type: test
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: Ie691b1c8841f5e195525bfff990f12ab918ba394
|
|
If an IPv6 Link Layer Address is missing from an interface,
treat it as a down interface. While this fails to send a
VRRP multicast group join, it also prevents a seg fault.
Type: fix
Fixes: 39e9428b90bc74d1bb15fc17759c8ef6ad712418
Signed-off-by: Jon Loeliger <jdl@netgate.com>
Change-Id: Iebf69bb30604a96de6587655eb872aa818158a56
|
|
Puts return statements back inside code blocks under the lock
Type: fix
Change-Id: I76d426f336200035026b92bcb0ffe2b472a3142d
Signed-off-by: Arthur de Kerhor <arthurdekerhor@gmail.com>
|
|
This reverts commit d70777aa60a87001f323f3b226d7e5cee2cd23d8.
Reason for revert: wrong fix
Type: fix
Change-Id: Ibff1b977eae8d2cc85888165ebf83c42eb661698
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
Signed-off-by: Arthur de Kerhor <arthurdekerhor@gmail.com>
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: Ie5c197f6ec0d41d5e405b22662701d83ad94d29e
|
|
Type: fix
Signed-off-by: Xiaoming Jiang <jiangxiaoming@outlook.com>
Change-Id: I2c2b739a5aa246bbf53d6663efd403c3aee9dddd
|
|
Type: fix
Outbound packets which arrive on tun/L3 interfaces use a default
adjacency for the interface & address family from the corresponding
interface pair. However, there are entries in the linux-cp adj table
that are created for them. Managing these entries might cause a
segfault because the rewrite data might exceed the reserved space for
it of 28 bytes in the linux-cp adj key (e.g. in case of GRE IPv6).
With this change, stop creating adjacencies for tun/L3 interfaces in
the linux-cp adj table and delegating them.
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: I4bcd685860053ab87c65064c182e3ed53fd4fae9
|
|
==283032==AddressSanitizer CHECK failed: compiler-rt/lib/asan/asan_mapping.h:366
"((AddrIsInMem(p))) != (0)" (0x0, 0x0)
#0 0x49c128 in __asan::AsanCheckFailed
#1 0x4ae8dc in __sanitizer::CheckFailed
#2 0x495dec in __asan::ShadowSegmentEndpoint::ShadowSegmentEndpoint
#3 0x495e48 in __asan_unpoison_memory_region
#4 0xfffff4e851f8 in svm_map_region /home/vpp/src/svm/svm.c:611:7
#5 0xfffff4e86d9c in svm_region_init_internal /home/vpp/src/svm/svm.c:797:8
#6 0xfffff4e87ce4 in svm_region_init_args /home/vpp/src/svm/svm.c:880:3
#7 0xfffff7f30d30 in vlibmemory_init /home/vpp/src/vlibmemory/memory_api.c:974:3
#8 0xfffff4fd5368 in vlib_main /home/vpp/src/vlib/main.c:1986:16
svm_global_region_base_va 0x200000000000 is not in the aarch64 mapping range,
leading check failure and vpp cannot start.
aarch64 asan mapping
|| `[0x201000000000, 0xffffffffffff]` || HighMem ||
|| `[0x041200000000, 0x200fffffffff]` || HighShadow ||
|| `[0x001200000000, 0x0411ffffffff]` || ShadowGap ||
|| `[0x001000000000, 0x0011ffffffff]` || LowShadow ||
|| `[0x000000000000, 0x000fffffffff]` || LowMem ||
x86 asan mapping
|| `[0x10007fff8000, 0x7fffffffffff]` || HighMem ||
|| `[0x02008fff7000, 0x10007fff7fff]` || HighShadow ||
|| `[0x00008fff7000, 0x02008fff6fff]` || ShadowGap ||
|| `[0x00007fff8000, 0x00008fff6fff]` || LowShadow ||
|| `[0x000000000000, 0x00007fff7fff]` || LowMem ||
Type: fix
Signed-off-by: Tianyu Li <tianyu.li@arm.com>
Change-Id: I55ddbdcd361d66d4cfaf6459b2fa20fd8b64af37
|
|
Applications like curl will poll the fd after a non-blocking
connect, so we need to avoid returning the wrong event.
Type: fix
Signed-off-by: liuyacan <liuyacan@corp.netease.com>
Change-Id: I7ea146fc954fda631b3d88b46bb80adfbcdf137c
|
|
Use autogenerated code.
Does not change API definitions.
Type: improvement
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Change-Id: I7b84767e75d5f8310ec071036a5780fa4530f79f
|
|
Type: improvement
Allow callbacks to be registered which will be called when an
interface pair is added or deleted.
Change-Id: I1c413ac2ada802021f9e56e2f878ce67e5eda2f5
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Use autogenerated code.
Does not change API definitions.
Type: improvement
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Change-Id: I4f9316b16f16a48e2042aa17db596bfd181bd314
|
|
Type: fix
Fixes: bf55e9931ce203049385fbf55dde291ead556679
Signed-off-by: Jon Loeliger <jdl@netgate.com>
Change-Id: I5410a7a5a8cdc1d41abcc42fe5b42e6e2991dc06
|
|
If ICMP comes from a router on path, source address must not be
rewritten in o2i path to avoid getting wrong checksum.
Fix ICMP checksum computations.
Type: fix
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: I035debccf966d7dbd63c364cb1e43380d641f708
|
|
Use autogenerated code.
Does not change API definitions.
Type: improvement
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Change-Id: I148022278a792b3687402b6915fe6fb513858a2a
|
|
Use autogenerated code.
Does not change API definitions.
Type: improvement
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Change-Id: I7ec4bbb21a079c6f6adfb4f954054b2b07bf19c5
|
|
Use autogenerated code.
Does not change API definitions.
Type: improvement
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Change-Id: I0971f12b7b82d5134d06ed0539d41624429c992b
|
|
Use autogenerated code.
Does not change API definitions.
Type: improvement
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Change-Id: I3c06e9cb3fabdcdce9c17e93cfedfd771295f589
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ibe32f7965f8cf457c39845713b029c8a4647ee55
|
|
Use autogenerated code.
Does not change API definitions.
Type: improvement
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Change-Id: I047310b8c9fcc51dcfb187710ff59b7895abe217
|
|
Use autogenerated code.
Does not change API definitions.
Type: improvement
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Change-Id: I13dae61ddb7150c7fe9a7fd0eae73055ff3f2816
|
|
Type: improvement
Set port type and supported flow actions on 2.5G Intel NICs which are
managed by the igc PMD.
Change-Id: Id144eaa158e24a3f10effb6b517d1c62fba0d2e8
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Use autogenerated code.
Does not change API definitions.
Type: improvement
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Change-Id: Ic7979755494a2fd23b9fa3d74e14f6b9ea0a46d0
|
|
Use autogenerated code.
Does not change API definitions.
Type: improvement
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Change-Id: I39505763371c98b75ff7b697dacd3eeb0d41d40a
|
|
ASan poison/unpoison vectors based on the vector length, but _vec_len()
bypass ASan annotations, contrary to vec_set_len().
Type: fix
Change-Id: I5265a5adcddef1aa11c77e0c3827346b1a66c306
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
When copying sessions from parent on fork, we should validate vep handle
in order to EPOLL_CTL_DEL in vcl_session_cleanup correctly when child
exit.
Type: fix
Signed-off-by: wanghanlin <wanghanlin@corp.netease.com>
Change-Id: I7696ecd898460c9a296d2800e46c7140e2218ed7
|
|
Main process may enter sighandler with a lock, such as lock in localtime
or in mspace_free, and child wrk cleanup may try to get such locks and
cause deadlock.
The patch move cleanup to vls_epoll_wait to wait app's next call.
Type: fix
Signed-off-by: wanghanlin <wanghanlin@corp.netease.com>
Change-Id: I9b208038a0f49b0ace44684189234aeac9d94730
|
|
Use autogenerated code.
Does not change API definitions.
Type: improvement
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Change-Id: I0a2c1cbbe798ddf9d08da78bf0b458a0f54fa13a
|
|
Use autogenerated code.
Does not change API definitions.
Type: improvement
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Change-Id: I0bdf870e2e9b0ebc11a3ce252fbd0667a83de4e6
|
|
Use autogenerated code.
Does not change API definitions.
Type: improvement
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Change-Id: I03f51393a92bae45608d9fc9f53164f3b0add3cd
|
|
Use autogenerated code.
Does not change API definitions.
Type: improvement
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Change-Id: I1de45c4db57444d2d2c9fb91b8a66a4f01be699b
|
|
TTL was already decremented in ip4-rewrite so it's okay if it's 1.
Type: fix
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: I587dc343737c15247eb62837a06d5e44c0d11acc
|
|
Use autogenerated code.
Does not change API definitions.
Type: improvement
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Change-Id: I0db7343e907524af5adb2f4771b45712927d5833
|
|
Use autogenerated code.
Does not change API definitions.
Type: improvement
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Change-Id: Iacaefbf04834f000a14f151c4b848f280ac46d63
|
|
Use autogenerated code.
Does not change API definitions.
Type: improvement
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Change-Id: I5dd30870443a22a7da65f6b5a6d3967991e2aceb
|
|
Use autogenerated code.
Does not change API definitions.
Type: improvement
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Change-Id: I7a0a189ce635a4a74e63ac4cb133686b8b7ba53a
|
|
When creating a new node, a corresponding node symlink is created when
the nodes counters update. To be sure we are able to access this
symlink, a retry mechanism was added.
Type: fix
Signed-off-by: Arthur de Kerhor <arthurdekerhor@gmail.com>
Change-Id: Ieb08d8554b4fd13d01e79062b5f820b235be9a13
|
|
Type: fix
Signed-off-by: Xiaoming Jiang <jiangxiaoming@outlook.com>
Change-Id: Ib691d8f66b0d6047d23a0bdc4f3d15e6380f31eb
|
|
Type: fix
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: Ib563e2c09d46cc26fb983ffde3d5fcb88166f6a5
|