summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2016-07-13Add plugins debian packagingDamjan Marion4-1/+24
New debian package "vpp-plugins" is created with enabled plugins. Change-Id: I8920178e8874f12e075858001ec44257dfaf497d Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-07-12packet-generator: various fixesDamjan Marion3-32/+44
Change-Id: I8f1be9a501574ff4d5024ed0d632392708716e77 Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-07-12Show cli for plugin path, name filter and loaded pluginsShwetha Bhandari1-0/+32
Change-Id: If6ab5f08bcdcf5e24bb8b31926894d2a56cb6c14 Signed-off-by: Shwetha Bhandari <shwethab@cisco.com>
2016-07-12policer actionMatus Fabian9-16/+387
JIRA: VPP-90 Policer allows you to specify the action to be taken on a packet: conform-action (green color) exceed-action (yellow color) violate-action (red color) Action to take on packets: drop - drops the packet transmit - transmits the packet, the packet is not altered mark-and-transmit <DSCP> - sets the DSCP value and transmits the packet Change-Id: I59c037e55e7e2a9fc9b9752e92426f3977f5587b Signed-off-by: Matus Fabian <matfabia@cisco.com>
2016-07-12Add incrementing MAC / count support for the l2fib_add_del APIDave Barach1-24/+82
Change-Id: I1df1cd3d2630baab979e840153f1f109d3ead0c2 Signed-off-by: Dave Barach <openvpp@barachs.net>
2016-07-12ENIC driver update to allow bonded interface admin down/up to pass trafficJohn Lo2-0/+79
When ENIC ports are used as slaves to a bonded interface, these patches enable traffic on bonded interface to resume properly on admin down and then up of the bonded interface. Change-Id: I339926010da614068417c72009b7af2f892890ce Signed-off-by: John Lo <loj@cisco.com>
2016-07-11VPP-190: support variable length array syntax in request messagesMarek Gradzki1-2/+4
The information is aleardy stored in array.length field, but vpe.api syntax should be uniform. Change-Id: Id84cd95c088281609c70548346cf0e408a6f49ff Signed-off-by: Marek Gradzki <mgradzki@cisco.com>
2016-07-11Simplify API to add LISP adjacenciesFlorin Coras5-158/+65
The API to add an adjacency requires that two things be provided 1) a local and a remote eid 2) the whole remote mapping for the remote eid. Since the API to add remote mappings can be used for 2), 1) in combination with this API are enough to add an adjacency. Change-Id: Ibe7474924bc3f28b6aed19cefa78fdb812de5eac Signed-off-by: Florin Coras <fcoras@cisco.com>
2016-07-11VPP-183: IPSec transport modeMatus Fabian4-18/+113
Change-Id: I22399aa9d55db0d91da7ba6acbbf552c0d201458 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2016-07-09dpdk: disable CRC strippingDamjan Marion1-1/+1
Change-Id: I7006a3068c22e18e62c84abb8cc6124695b9ca44 Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-07-09packet-generator: fix pcap stream supportDamjan Marion2-4/+18
Change-Id: I494280964deda1d9448540cb5c6e7a8b750fff93 Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-07-08fd-io-styleify for svmDave Barach11-2272/+2671
Change-Id: I816de8b1f255dc3bc6d2904566ea0b0f68fac5d8 Signed-off-by: Dave Barach <dave@barachs.net>
2016-07-08VPP-192 ip_neighbor_add_del incomplete vat helpChris Luke1-4/+5
Adds missing items to ip_neighbor_add_del help text Change-Id: I1d74c7d31ec6d96f8de9bfb5bfc7872b9cbef682 Signed-off-by: Chris Luke <chrisy@flirble.org>
2016-07-08fd-io-styleify passDave Barach17-3544/+4130
Change-Id: I72d0dff064162d11321257c858f68da1ba79ea48 Signed-off-by: Dave Barach <dave@barachs.net>
2016-07-08fd-io-styleify passDave Barach65-7913/+9520
Change-Id: If2d57a213fc2fec996db26df332910c3d2105f97 Signed-off-by: Dave Barach <dave@barachs.net>
2016-07-08IPv6 frag: avoid overflow while parsing extension headersYoann Desmouceaux1-0/+7
A malicious packet could advertise an extension header length bigger than the actual packet length, which would cause an overflow. Change-Id: I277123e6fde6937b0170f2b2e33846bd22848ac4 Signed-off-by: Yoann Desmouceaux <ydesmouc@cisco.com>
2016-07-08Add locator prority and weight to LISP APIFilip Tehlar3-22/+57
Change-Id: Ifa9bcd9a9c5dbda00ff8096909ccbc822445b8cb Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2016-07-08Remove unnecessary and obsolete configure.ac directivesDamjan Marion14-23/+7
Also enable silent rules where missing Change-Id: Ia521886815c862b013f01df4cc18fd8a298aaaa1 Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-07-08Update emacs plugin skeletonDamjan Marion2-25/+16
Change-Id: I52b370abd8b6fec34b8219a274f2de404e072a97 Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-07-08Add IPFIX to vpp-api-testJuraj Sloboda1-3/+127
Change-Id: I32dcfb1c33f0b2324de1ebf08851e8b65793e4ea Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
2016-07-08Add binary API for IPFIXJuraj Sloboda5-3/+198
Change-Id: I3346b18126d65b72726e977dfb11ba4c380056c0 Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
2016-07-08Make IPFIX src port configurableJuraj Sloboda3-1/+8
Make src port configurable in flow report sample code Change-Id: Ic7d3c3de17b83821106a827fb65e79381044da7e Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
2016-07-08Multiple changes in the plugin build infraDamjan Marion18-321/+84
- configure.ac - some plugins are enabled by default - Plugin .so files are placed into corresponding subdirs - WITH_PLUGIN_TOOLKIT macro is retired - not needed anymore - plugins/build-data is removed - plugin makefiles are not building static libs anymore - plugin makefiles are not installing header files to /usr/include anymore Change-Id: I55681bd9ce34811f7eb1b2b24d9f0ca42df1cf04 Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-07-08VPP-189 Some bugfixes for issues reported by CoverityChris Luke2-14/+66
CID 130914 Buffer not null terminated CID 130916 Unchecked return value CID 130938 Unchecked return value from library CID 130939 Unchecked return value from library CID 130940 Unchecked return value from library CID 131042 Argument cannot be negative CID 131222 Resource leak CID 131223 Resource leak CID 131334 Double close CID 131335 Read from pointer after free CID 131211 Resource leak CID 131212 Resource leak Change-Id: Idd80b91f621278e0be15911f2ed4354dbe4fc7f2 Signed-off-by: Chris Luke <chrisy@flirble.org>
2016-07-08Allow DPDK per interface startup config to enable/disable VLAN strippingJohn Lo2-8/+27
The init of VIC/ENIC ports enable VLAN stripping of received packets by default, which is different to all other devices. The VLAN stripping of ENIC ports can be disabled by adding the per device DPDK config as "vlan-strip-offload off" such as: dpdk {... dev 0000:0c:00.0 {vlan-strip-offload off} ...} The per device config "vlan-strip-offload on" can be used for enabling VLAN stripping for other devices which support this function but is disabled by default. Change-Id: I9c81904a87c26868a07900b03677aeeb57f72372 Signed-off-by: John Lo <loj@cisco.com>
2016-07-08Reset IPFIX streams after configuration changeJuraj Sloboda1-0/+17
Reset IPFIX streams if reconfiguring IP addresses or collector port Change-Id: Idc914f90462572342d4ed02b538bb2d30b317931 Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
2016-07-08Set plugin path properly when using toplevel makefile to run/debug vppDamjan Marion1-8/+11
Change-Id: Ib6f7dd9d7e1d9f2f2108a8b89421149e4435d5ec Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-07-07Add configuration options for IPFIXJuraj Sloboda3-11/+52
Make Path MTU configurable Make template resend interval configurable Make collector port configurable Change-Id: Ia557916137995ea565f0ede12e169efe81eb0a5d Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
2016-07-07Use arbitrary FIB for IPFIXJuraj Sloboda3-8/+20
Change-Id: I85b3543a3f72a10e15c252e04ce2e4a390513ca9 Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
2016-07-07VPP-142 Recursive route sending traffic to wrong interfaceNeale6-185/+249
Indirect routes should always result in an indriect adjacency even when the route's next-hop is covered by a connceted, since the covering route may change and no tracking is in place. Some de-duplication of code for installing indirect routes via the CLI and API. Change-Id: I7a440ffba43ae3990b68cb407244c06bd0827534 Signed-off-by: Neale <nranns@cisco.com>
2016-07-07VPP-148 added bvi_mac flag to l2fib_add_del api call similarly to climarek zavodsky4-1/+10
Change-Id: I3b65e85d24ed37b6889af7e194fee45ec61b15a8 Signed-off-by: marek zavodsky <mazavods@gmail.com>
2016-07-07Fix bugs and do some optimization in IPFIX codeJuraj Sloboda2-6/+22
Change-Id: Iba8627062874eac63c584ec05343f4591f48c286 Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
2016-07-07Document more nodesDave Barach3-0/+142
Change-Id: Ib8ef0559aa0573bf1229e9c794d48520197f9c8a Signed-off-by: Dave Barach <dave@barachs.net>
2016-07-07Remove #if DPDK == 0, to eliminate a data structure size mismatchDave Barach1-2/+2
Otherwise, e.g. the ip4/6_main_t's change size between PLATFORM=vpp and PLATFORM=vpp_lite. That, in turn, makes it far easier to build broken plugins. Change-Id: Ic962d75b170eee698de29c4e29849ce73d27caad Signed-off-by: Dave Barach <dave@barachs.net>
2016-07-07Remove duplicate code buffer_func.hDamjan Marion1-4/+0
Change-Id: I57e442b1f3486c5e8caac9d2e288869ee10f37b8 Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-07-07Fix deletion forwarding entries when deleting static remote mappingFilip Tehlar1-0/+3
Change-Id: I11207a0452cbccfb959ff426faefda4820463007 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2016-07-07Retire support for DPDK 2.1.0 and olderDamjan Marion8-197/+2
Change-Id: I3c3427c61e32d4727360aa802950bb9ab44afd84 Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-07-07Add some doxygen tagsDave Barach4-1/+176
Also add an index of node names Change-Id: Id65c2e607976d8bad73deb738035a471be077196 Signed-off-by: Dave Barach <dave@barachs.net> Signed-off-by: Chris Luke <chrisy@flirble.org>
2016-07-07Add an option to dump details about specific LISP EID in API/CLIFilip Tehlar5-12/+162
Change-Id: Ie5e6751fd791e7ca728522632332abe442a1a75b Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2016-07-06Retire PLATFORM=virlDamjan Marion4-52/+2
Change-Id: Iaf9735258f456574534c1a581b983326badea171 Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-07-06Add support for capturing packets on packet generator interfacesDamjan Marion8-53/+215
This patch introduces following changes: - 4 predefined pg/stream[0-3] interfaces are removed - Interface naming is changed form pg/streamX to pgX where X can be any u32 value - one pgX interface can handle multiple streams - keyword "source pgX" is added to "packet-generator add" command, X is 0 by default - new cli "packet-generator capture" is introduced - new cli "create packet-generator interface pgX" Change-Id: I768d075b9d4a34f0b5073debdc5dd4a0880c682c Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-07-06Netmap: Fix Netmap Polling IssueMohsin KAZMI1-7/+31
Previously, netmap node switched from interrupt to polling if worker threads are enabled even if there was no netmap interface running. Netmap input node consumed CPU cycles because of input node calls but these cycles were wasted as input node did not have any packet to process. This patch fixes issue stated above using more intelligent way of enabling or disabling polling based on interfaces count. But the pre-requisite condition for polling is, worker thread(s) should be enabled. Change-Id: I3a901823c7b040cce3393958981f439b9f290fe5 Signed-off-by: Mohsin KAZMI <sykazmi@cisco.com>
2016-07-06VPP-184 - Bad type translation in jvppJan Srnicek1-2/+2
Change-Id: I6dda9eb8d58a2bc9a1e4d6636688dfa1f8bb88c6 Signed-off-by: Jan Srnicek <jan.srnicek@pantheon.tech>
2016-07-06Bug fix for VPP-104 about not being able to down a sub-if if the super-if is upCalvin1-1/+3
Change-Id: I913c9807519aa10e515d12fcfbcbfc22b58f5839 Signed-off-by: Calvin <calvin.ference@gmail.com>
2016-07-06VPP-182: IPv4 static ARP entries should not be deleted on interface downJohn Lo1-19/+24
IPv4 static ARP entries should remain when interface is set admin-down and be reapplied on interface admin-up. Change-Id: Ic0051865154230c2561d6e6421b05d842f147ca7 Signed-off-by: John Lo <loj@cisco.com>
2016-07-06VPP-177: IPsec empty buffers allocation fixMatus Fabian2-2/+4
Change-Id: I6d224fe19f1e0dd7ad5659e0734bc96ba37337ff Signed-off-by: Matus Fabian <matfabia@cisco.com>
2016-07-05VPP-144: Fix that shows the empty segment field in sh sr tunnelCalvin1-1/+6
Change-Id: Idc71a48f2eab3b712f6953af8baf1a6ecd54dcaf Signed-off-by: Calvin <calvin.ference@gmail.com>
2016-07-05VPP-179 Fix adjacency reference-count botchesDave Barach2-2/+24
Change-Id: I3fe83a511064d73087c4526ef33cd7628f15b90f Signed-off-by: Dave Barach <dave@barachs.net>
2016-07-05ENIC driver patches to address various issuesJohn Lo10-0/+741
Also clear x-bit for old patch files 0013-xxx and 0014-xxx. Change-Id: I217fdbfb32cef1ae575c668270d3baf593e688c6 Signed-off-by: John Lo <loj@cisco.com>
2016-07-04LISP CP cleanup and refactoringFlorin Coras10-764/+1111
- avoid code duplication by using only one function for insertion/updating of remote mappings into map-cache. Static remote mappings are now inserted using this function as well and therefore the code does not try to build forwarding entries out of them now. - bring up lisp dp interfaces when a vni is bound to a vrf. - ensure eids are cleaned-up before parsing control plane messages - ensure map-requests are always sent to default fib - new API to insert lisp adjacencies as opposed to remote mappings which should be replaced post merged in CSIT - reorganize and group functions according to their purpose and use. No need to pre-declare internal functions now. - this does not touch locator-set logic Change-Id: Ibcfc0f2d9c1bc1c9eab6e83c1af1b4cf9302ac10 Signed-off-by: Florin Coras <fcoras@cisco.com>