Age | Commit message (Collapse) | Author | Files | Lines |
|
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I1888a8247ef03cfb715a2c0e0e3ca2a108fecbc8
|
|
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: Iff7e995499e422003147342ff14de483d807b3f3
|
|
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I2342baa91234db1336394305c031dbfa21d219a5
|
|
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: If50e66638554e0fcfc72d35a89a39379dfcb530d
|
|
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I9462de3d27b88539bff87c07a59987dd62fb2add
|
|
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: Ifdb623c092cf0a9d9e24117edc32c6ddf014052f
|
|
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I2171ef678ecad12d681668257498a5a62004152f
|
|
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I8fd870e757e9243d4f0916dfbbe65495f7e1a8c6
|
|
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: Icdc359beb127944418305775e42fa88c569dfbd7
|
|
Type: feature
Change-Id: Idea1857eb2225881d2982a7aa2ae7a79536b3f33
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: fix
Change-Id: I8b8875f1dc9203dfbb443ac43df8250cbb0b1edc
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: fix
Change-Id: Iad73f47cef3d29c4b0b7d1f58f2f2b14ba4b1d38
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
This test should be fixed or removed.
EXTENDED_TESTS should not become "BROKEN_TESTS"
Type: test
Change-Id: Id998f0d3b7bd31100f917d076fbd7ddb46d99ed2
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: fix
Plug-in for IPv6 Segment Routing Mobile
Fix the static analysis issue on srv6-mobile/gtp4_d function.
Signed-off-by: Tetsuya Murakami <tetsuya.mrk@gmail.com>
Change-Id: I5c419b76a30c9616dc3557267fcceed0d512b67e
|
|
Type: fix
Ticket: VPP-1804
Fix a regression introduced by 640edcd90.
The port set ID on received IPv6 packets for MAP-T was being
checked against the destination port. It should be checked
against the source port.
Added a new unit test to verify that a v6 packet with a good
source port is translated and forwarded and a v6 packet with
a bad source port is dropped. The important part of the test
which will prevent similar future regressions is that the
source port and destination port are not equal. The existing
unit test used the same source and destination port which is
why it did not fail when the regression was introduced.
Change-Id: Idc144ea509722bb9e0f80b3887d220384a04e6d6
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Type: test
Change-Id: I4f8aee3efa53d58f96631fe2d2da5756304fb75a
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Configure n-tuple classifier filters which apply to the vpp packet
tracer.
Update the documentation to reflect the new feature.
Add a test vector.
Type: feature
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: Iefa911716c670fc12e4825b937b62044433fec36
|
|
This fix is for cancel termination of vpp after receive malformed
packet type of ip6.To avoid termination of vpp are checked if are
missing data in packet. This occours, when payload length in ip6
header packet is more than real count of data in packet. When
this error occours, packet is ignore.
Type: fix
Ticket: VPP-1693, VPP-1694
Change-Id: I9d9ecea7b75c8702cb31aa8051c8d4d7ce19659d
Signed-off-by: johny <jan.cavojsky@pantheon.tech>
|
|
Type: feature
Plug-in for IPv6 Segment Routing Mobile
Support the plug-in function in SR Policy.
Support GTP4.D plug-in as SR Policy plug-in.
Signed-off-by: Tetsuya Murakami <tetsuya.mrk@gmail.com>
Change-Id: I306160b7203921d879940193868944158867c482
|
|
This change fixes the error message, which would previously report
mismatch on IPv6 layer instead of TCP layer.
Type: fix
Change-Id: Ie78779685362a420d155f928b3cdb341bc3fb8bc
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Validate two tainted scalars, filter_sw_if_index, that
came from an API message.
Type: fix
Change-Id: I3ac8a09f91f380185e36babeaa6330691f7cb24b
Signed-off-by: Jon Loeliger <jdl@netgate.com>
|
|
Type: feature
Change-Id: Ic6d44122d3e62e09402e3f1946f7e57e9b5e7c5f
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Type: test
This reverts commit 087c811b63aa6b0575149749e188bb37e7fb0513.
Change-Id: Ica12597f27d5a75c33c12c2d27a227dc4866adcb
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: feature
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: Id7b30b5fe63e68ae88f3a42aa77d2614ccda724d
|
|
Type: fix
Since Vxlan hw offload jumps the ethernet-input node, so needs to
adjust the data offset accordingly
In original code, the current_data is 0 when arriving vxlan-flow-input
node(due to no graph node before it, except the dpdk-input), so this
code block cannot find the correct vxlan header:
enum
{ payload_offset = sizeof (ip4_vxlan_header_t) };
vlib_buffer_advance (b0, payload_offset);
see code in src/vnet/vxlan/decap.c, function vxlan4_flow_input_node
This patch fixes this issue
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: Iab4af7a7dc3b69a117a4c9ea1c59662669a6438c
|
|
Type: fix
Change-Id: Ie024792015f3c9c52102c9be03da63c79f3456af
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
In Nginx performance test, we notice that there are so many session kept
open with the state of TRANSPORT_DELETE, and it is root caused that
vppcom fails to return close state.
Type: fix
Change-Id: Ia30f959e0e5adb5b8bcfa13fb1dd7b2cb410a31b
Signed-off-by: Yu Ping <ping.yu@intel.com>
|
|
Type: fix
Change-Id: I454aff1b187b75a1328c90e30b9b487377ae5f68
Signed-off-by: Yu Ping <ping.yu@intel.com>
|
|
- Note: This was not caught by CI because the VPP 'make verify'
target always build libvom.so
Type: fix
Fixes: f0797d130
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: I8663e317e4e793c386b09d1cb887133de1e43faf
|
|
Type: feature
Change-Id: I7c6be2b96d19f82be237f6159944f3164ea512d0
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
vapi.connect() only raises subclasses of vpp_papi.VPPIOError.
vapi.disconnect() doesn't raise any exceptions, removed uneeded try block.
Type: test
Change-Id: Ide6e6db298b205f14382065862e358757619a5ba
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: test
Change-Id: I24e740aa87a8a4061fa98740f2d636997e18f08d
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: feature
Change-Id: Ia626188c22dc80c2b7a06b61cf0af435ee53d1e7
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: feature
the fib_source_t enum alone no longer defines the priority and
behaviour, instead each source must be allocated these attributes.
This allows the creation of other sources by the plugins (and
soon over the API).
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I890ee820fbc16079ee417ea1fbc163192806e853
|
|
Type: feature
Change-Id: I0129ad6ace44a50a8a3b26db8e445cd06b2b49e8
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I2e25e6f9481afd7370bad4332906a2a7f0e78081
Type: make
Signed-off-by: Jon Loeliger <jdl@netgate.com>
|
|
Type: fix
Change-Id: I5467bbe3b25b1ea3fb44157abe6e7bfb3f191e77
Signed-off-by: Jon Loeliger <jdl@netgate.com>
|
|
This patch addresses the functionality that is
missing for distributed make test source files.
In addition it extends the concept of colocating
test source code with functional source code
(eg. src/vcl/test). It also cleans up deficiencies
in the make test makefiles.
NOTE: Due to the way sphinx document tools work,
all test, all of the make test python code is
gathered using soft links into the directory:
.../build-root/build-test/src
Change summary:
- Remove 'make test' help details from
main makefile help output to reduce clutter
and redundant help output
- Move all generated build output to
.../build-root/build-test
- Move test_vcl.py as first usecase for
distributed core feature make test code
- Add test-wipe-all target and fix wipe targets
to remove all generated files
- Fix 'make test-doc' to generate module
documentation for all source files
- Remove unused targets in test/doc/Makefile
- Fix 'make test-shell'
- Fix test/ext Makefile to not generate
bogus output
Type: fix
Fixes: a43c93f8554ad7418e31be3791b3fb71232f60ac
Change-Id: Icc2ddb81d474081c3ede4548ecd7a0624651f62d
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
Type: fix
There is a race condition in when receiving TX from
a client application :
As egress_emit writes as much data as possible to
the stream, if during egress_emit the app writes
to the fifo, the data will be directly passed to
quicly. Then TX callback happens and triggers
a scheduler update telling quilcy the stream has
data to send. When the next egress_emit is called
and no more data has come, we have nothing to write,
we return len = 0 to quicly which breaks an assert if
a loss happens later on.
Change-Id: I47e00a14dfc9068b5dac7b5c090a89124aea004f
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: fix
First attempt to clean the leftover state when
accept_notify / connect_notify fails due to mq
size constraints. vpp should now be left in a
state such that clean state will eventually be
reached when timers fire.
Change-Id: I9e1166dab2778bf05d5af42d437769651369cae0
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: refactor
Change-Id: I51405b9d09fb6fb03d08569369fdd4e11c647908
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: refactor
Change-Id: I55aace44773e4fab0470d27b14dd68544f7d99c5
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: feature
Change-Id: Ia9cb57b9f7c2d14a137556d6918763f1cb11850d
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: fix
Change-Id: Iab96ebc1579b0be5b711f975163f9ac96648d2ad
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: fix
Fixes: cb9cadad578297ffd78fa8a33670bdf1ab669e7e
Change-Id: Id6de9780da41db5d762fe042f533cfaf21ed7b73
Reported-by: Rajith PR <rajith@rtbrick.com>
Signed-off-by: Jon Loeliger <jdl@netgate.com>
|
|
Type: fix
Fixes: de34c35fc
The API handler for requests to retrieve IP reassembly settings was
modified to support shallow virtual reassembly. It retrieves
settings into local variables now instead of directly into the reply
message. The fields in the reply message were not being populated
using those variables. So the reply message was being sent with all
0's, except in the is_ip6 field.
Also, the max_reassembly length field in the reply message was not
being populated.
Change-Id: I80b071340fdc190c3a0b1f7294a03f14b6e00ecc
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Type: refactor
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I3aad20b35d89fc541fdf185096d71ca12b09a6e2
|
|
Type: feature
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I9467f11775936754406892b8e9e275f989ac9b30
|
|
Type: refactor
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I1d8b88fe1eefc850865297b4f025b97e6373a6bd
|
|
Boldly assign IPv6 to Neale and to me.
Ole said so. Really!
Change-Id: Iaa30a57230558dcf3ee016a94479cac95bb2d50d
Type: make
Signed-off-by: Jon Loeliger <jdl@netgate.com>
|