summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2020-06-30tcp: avoid rcv wnd more than RX fifo can enqueueRyujiro Shibuya2-7/+12
Type: fix Signed-off-by: Ryujiro Shibuya <ryujiro.shibuya@owmobility.com> Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: Ie358b731f8ecb1fcaebd6e79f5ce5c10802c2814
2020-06-29gso: fix the l2 pathMohsin Kazmi1-8/+10
Type: fix Change-Id: I4f91175444dec9800d651aa5a5e0472359de63d1 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2020-06-27udp: align udp_encap_t_ to 2 cachelinesVadym Martsynovskyy1-4/+4
Based on the comments in the struct, udp_encap_t_ is meant to span 2 cachelines. Due to the 64 bit alignment of dpo_id_t, the struct spanned 3 cachelines. This caused fetching ue_ip_proto to trigger an additional cache miss. This patch rearranges the ordering of the struct fields so that udp_encap_t_ only spans 2 cachelines as intended. before: (gdb) print (int)&((struct udp_encap_t_*)0)->cacheline1 $8 = 128 after: (gdb) print (int)&((struct udp_encap_t_*)0)->cacheline1 $1 = 64 Type: fix Signed-off-by: Vadym Martsynovskyy <vmartsyn@fb.com> Change-Id: I066c08654d4a8ef3e2d3954e957d4c5d382b209f
2020-06-27sr: fix for SID index across segment lists within a sr policyChinmaya Agarwal1-1/+1
Type: fix Signed-off-by: Chinmaya Agarwal <chinmaya.agarwal@hsc.com> Change-Id: I9aa5456bf94356e8702fbfd39b14db4c2e74d3e6
2020-06-27l2: performance enhancement in l2inputZhiyong Yang1-80/+69
Short Load/Stores combined with prefetching in the beginning of the loop place too much pressure on AGUs and memory accesses. The patch interleaves load/store operations with computational operations to alleviate the pain point. vlib_get_buffers is also leveraged. Redefine u8 dst_and_src[12] instead of dst[6] and src[6] in struct l2input_trace_t in order to merge two copys into one. Type: improvement Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com> Change-Id: I7d3df7732c476069235e3019c68f0f53bca9637e
2020-06-27vrrp: backup processes priority 255 advertisementMatthew Smith2-1/+381
Type: fix When accept mode is enabled, a backup VR will configure the VR virtual addresses locally and respond to packets sent to those addresses. This did not work when the primary VR is the address owner and sends advertisements using the virtual address as the source address. It also did not work when NAT was configured on the interface with the virtual address as the NAT pool address. In both cases, advertisements from other VRs would arrive and be dropped because they appeared to be spoofed - the source address would be an address that is configured as an interface address on the instance receiving it. When accept mode is enabled for a VR and the VR enters the master state, add an input feature on ip[46]-multicast for the interface which looks for VRRP advertisements, figures out whether they are for a VR which is configured with accept mode and is in the master state and kicks them straight to the VRRP nodes to avoid dropping them. Change-Id: I240ba1ee0b3fd6d693de729698c1181dc71bb08b Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2020-06-27lacp: add unit testSteven Luong1-0/+364
add test_lacp.py to cover basic lacp unit test Type: fix Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: I6f7f3d801956e54106f3c55cedaca186d81dad25
2020-06-27nat: replace speculative buffer enqueue modelKlement Sekera5-2278/+2107
Replace speculative buffer enqueue coding model with vlib_get_buffers(...)/vlib_buffer_enqueue_to_next(...). Type: improvement Change-Id: I7dbfac2234a7bd754c599857eb1d5b601da5bc7c Signed-off-by: Klement Sekera <ksekera@cisco.com>
2020-06-27ikev2: add FEATURE.yamlBenoît Ganne2-0/+19
Type: docs Change-Id: Ie7836543e52bee08d12c565fbb6238d3e82ea3ce Signed-off-by: Benoît Ganne <bganne@cisco.com>
2020-06-27flow: add IPSec ESP/AH flowChenmin Sun3-1/+114
This patch adds the IPSec ESP/AH type flow support Have tested on E810 with Intel iAVF driver Type: feature Signed-off-by: Chenmin Sun <chenmin.sun@intel.com> Change-Id: I6ab8e69f67c423cc4e33f3c363881a97cdb98c30
2020-06-27virtio: add tx traceMohsin Kazmi1-2/+60
Type: improvement Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com> Change-Id: I0b1a1ce085ceb75fe139092e40878566682a7986
2020-06-27tap: remove the bridge configurations for TUN interfaceMohsin Kazmi1-9/+10
Type: fix Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com> Change-Id: Ifeae641ec0aa7de74e33e582234505bf6e28ca87
2020-06-27ikev2: remove unused fieldFilip Tehlar1-1/+0
Type: improvement Change-Id: I0893d7cd8b8ab9958f585ac564bd0638bc60e78a Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2020-06-26ip: fix the punt redirect for ip4Mohsin Kazmi1-6/+9
Type: fix Change-Id: I39341f201209931392f315ead5adfddd8b567caf Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2020-06-25misc: add gdb macrosDave Barach2-2/+103
These gdb macros should prove very helpul when poking around in core files. Pifi (pool_is_free_index) is not straighforward. Best to work it out once. Others: bitmap_get = clib_bitmap_get vl = vec_len pe = pool_elts node_name_from_index, as described vnet_buffer_opaque, prints the primary buffer opaque vnet_buffer_opaque2, prints the secondary buffer opaque Fix vppinfra unit-test compile error Type: improvement Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: Id2a2391a47e5a07cf3757f473e3805cc04784161
2020-06-25nat: avoid division by zeroKlement Sekera1-1/+8
Return error instead of dividing by zero. Type: fix Signed-off-by: Klement Sekera <ksekera@cisco.com> Change-Id: I9f6a942e87ab87e8f1921e744ec1add45884e74a
2020-06-24tests: fix deps pinning / patchingAloys Augustin1-5/+3
This ensures we don't recompute the requirements-{2,3}.txt on each make test run, and skips patching scapy if it is already patched instead of failing. Change-Id: I3da57182ae49f3dd04db139d96734a5d145fedff Type: fix Signed-off-by: Aloys Augustin <aloaugus@cisco.com>
2020-06-24virtio: fix the vlib buffer flagsMohsin Kazmi1-2/+1
Type: fix Change-Id: I92e8e30e4175229e24dd92471016e9095b5cc83e Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2020-06-24nat: deterministic: disallow invalid configKlement Sekera2-5/+20
Prevent overflow if input network prefix is too small and crash on packet #1 due to vector not being allocated/initialized. Type: fix Signed-off-by: Klement Sekera <ksekera@cisco.com> Change-Id: I3494cc62ce889df48cc59cc9340b5dd70338c3a8
2020-06-23udp: jump over ip4 optionsFlorin Coras1-3/+3
Type: improvement Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I4f57a776302e11815fcea433ba8cf6724799ff65
2020-06-23vppinfra: fix u32x4_gather definitionDamjan Marion1-1/+1
Type: fix Change-Id: I3df8d3f277bfadee95bfc329e8ce8b929a986af6 Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-06-23vlib: debug CLI macro expander, part deuxDave Barach5-16/+99
Deal with circular macro definitions instead of crashing due to stack overflow. Separate macro tables, per CLI session Add documentation to the Sphinx docs Type: improvement Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I55fc9152bd37ad0c15fa3959f38b07b63100e634
2020-06-23nat: fix broken testKlement Sekera1-2/+14
Type: fix Signed-off-by: Klement Sekera <ksekera@cisco.com> Change-Id: I04952865b7e2b447763d0b67d120c3d933177646
2020-06-23ip6-nd: punt neighbor advertisementsAlexander Chernavin1-1/+1
With this change, punt received neighbor advertisements instead of drop in order to give other elements of the system an opportunity to handle them. Type: improvement Change-Id: Ie6cde9eebc83e42029967141cb32ebc459fd3680 Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
2020-06-22nat: set buf error if can't create userKlement Sekera4-27/+9
Type: fix Signed-off-by: Klement Sekera <ksekera@cisco.com> Change-Id: I747d78966a7296dcbae54d54b0c165d407c8863d
2020-06-18ikev2: use both local and remote ID for profile lookupFilip Tehlar2-22/+50
Type: fix Ticket: VPP-1890 Change-Id: I9441d5afc38df7dabf6cccaead69dd32646d2a9e Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2020-06-21vpp_config: Updates for 20.05John DeNisco8-98/+142
Added external dependancies package. Updated the startup.conf template. Fix extras/scripts/check_commit_msg so it accepts '_' characters in feature names. Type: fix Signed-off-by: John DeNisco <jdenisco@cisco.com> Change-Id: I69c33a24b30d31e5b8081021030bff88cbaeace9 Signed-off-by: Dave Barach <dave@barachs.net>
2020-06-20tests: improve lcov stats for memory_api.cDave Barach1-1/+19
Cover vl_mem_api_dead_client_scan(...), which is not so simple. Spin up vpp_api_test using pexpect.spawn, make it bootstrap a private memory segment, kill vpp_api_test, and wait for the dead client scanner to run a few times so that it declares the client dead. The test only runs if GCOV_TESTS=yes is set in the environment. Type: test Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I3c712fa011df2e23761a2e73c1aba0c7e50123a6
2020-06-18tests: add ikev2 test framework with basic test caseFilip Tehlar2-0/+651
Ticket: VPP-1905 Type: test Change-Id: Ie66fbd8e37eb5e69bd61b701ed3449366bee8c84 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2020-06-19build: add cmake dependency from test plugin to apiTom Seidenberg1-0/+3
Type: fix Signed-off-by: Tom Seidenberg <tseidenb@cisco.com> Change-Id: I00fa22733bd293e56eb6b81346fdf2d75ad9d88f
2020-06-19vlib: add recursive macro expander to debug cliDave Barach6-37/+237
All of the pieces have been sitting around for years. Added several debug CLI commands: "define <variable-name> <value>" "undefine <variable-name>" "show macro [noeval]" "echo <whatever>" Macros may refer to other macros. To defer evaluation: "define foo \$(bar)" or some such. The macro evaluator is not smart about "define foo \$(foo)" or more complicated circular definitions, so don't do that. Environment variables are available, simply use $<name-of-environment-vbl> The macro expander has a table of (overrideable) builtin names, which are evaluated by calling functions. Simple example: echo $USER define ip1 192.168.1.1/24 define ip2 192.168.2.1/24 loop create loop create set int ip address loop0 $ip1 set int ip address loop1 $ip2 show int addr show macro undefine ip1 undefine ip2 Type: feature Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I08a800647bac573d8ae3cfd75c40061d41c5f976
2020-06-19nat: remove unused codeKlement Sekera2-47/+0
Type: refactor Signed-off-by: Klement Sekera <ksekera@cisco.com> Change-Id: Icc55276c8a4c256049718610cb131a34dc8d0a80
2020-06-17docs: add more FEATURE.yaml documentationDave Barach3-0/+39
For src/tools/g2, src/vlibapi, and src/vlibmemory Type: docs Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I800c3e3a1ecb011d5e692d78a015e78342706786
2020-06-17docs: add more FEATURE.yaml documentationDave Barach4-0/+104
This patch documents the DNS plugin, vlib packet tracing, vnet feature arcs, and the vppinfra library. Type: docs Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: Idb16ec0593d428ce78fe8404374a823a56b4b420
2020-06-17nat: print hash table parameters in CLIKlement Sekera1-2/+13
Type: improvement Signed-off-by: Klement Sekera <ksekera@cisco.com> Change-Id: Id6ab7e2ca965e860ea3f96145a888e0f3ccf9778
2020-06-17build: multiple yaml file supportDave Barach1-2/+2
Change the yaml file matching pattern from FEATURE.yaml to FEATURE*.yaml, so we can document multiple features in one directory. Type: improvement Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: Ic62f9fb4c73330c698724244cd8b362364fce5f9
2020-06-17nat: add more trex test scriptsKlement Sekera3-0/+206
Type: improvement Signed-off-by: Klement Sekera <ksekera@cisco.com> Change-Id: Ia824d663c86d6a7c9bafe0206e9a93f93884739d
2020-06-17build: cmake cross-compilation fixesDamjan Marion2-1/+5
Type: fix Change-Id: I40337c208375b74b4dc3c35102c5e66a6e4568e8 Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-06-17ip-neighbor: fix MLD hash key using stack pointerBenoît Ganne1-2/+2
Use pointed value (ipv6 address) as hash key instead of pointer value (pointer to ipv6 address on the stack). Type: fix Change-Id: I74a8b6d4bb552b5b344bcb50c8e830700c4ce739 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2020-06-16misc: fix sonarclound warningsDave Barach3-2/+11
Type: fix Ticket: VPP-1888 Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I9c2fb926a5e010658088a74051c8c3462ff61734
2020-06-16vlib: address sanitizer support for stack switch, enable clangDamjan Marion8-17/+88
Type: improvement Change-Id: I81df4b61d1f0b8c1df77c1ee9bebcb491e155b69 Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-06-16build: fix address sanitizer default argsBenoît Ganne1-1/+1
Type: fix Fixes: ec3a3f16e4cd3b33e2a409fb01b8d8826e05f9fa Change-Id: Iea3acd93a96b4bfc9f335e37ec04c00e8fa5ff27 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2020-06-16interface: add minimal vpp pkt trace for error-dropDave Barach2-8/+125
Provide a minimal trace [ip4/ip6 src/dst address] for dropped pkts when the user specifies "trace add error-drop XXXX", but does not trace pkts from the original input node. This is a wireshark dissector problem. Packets thrown at error-drop may be well-formed, or not. VPP must not crash, no matter what. The minimal trace capture and decode could be enhanced. Anyone interested in doing that must consider all of the corner-cases involved. This version should be at least somewhat useful. Note that "pcap trace drop ..." - and the packet generator - seem like the right tools to use when researching more complex issues. Type: improvement Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I961ca133980ffa2a1e5707879a443b21442ed894
2020-06-16nat: improve outside port selection & perfKlement Sekera4-87/+110
Prefer using source port form packet as outside port if possible. Type: improvement Signed-off-by: Klement Sekera <ksekera@cisco.com> Change-Id: I5c25f6a42386f38c9a6cc95bd7dda9f090b49817
2020-06-16gtpu: support separate rx-decap and encap-tx teid valuesJohn Lo6-76/+232
Support separate local and remote TEIDs, with local (or RX) one used for GTPU tunnel RX/decap and remote (or TX) one used encap/TX. Updated current gtpu API to support seperate RX/TX TEIDs and added new gtpu_tunnel_update_tteid API to allow changing TX-TEID of an existing GTPU tunnel. The current tunnel field "teid" is used for RX-TEID and a new field "tteid" is used for TX-TEID. Type: improvement Signed-off-by: John Lo <loj@cisco.com> Change-Id: I549d79750a34bb965036da298c0ca894d15c2c20
2020-06-16virtio: add vhost sw_if_index filter for sw_interface_vhost_user_dumpSteven Luong4-6/+23
The filter sw_if_index was in the API sw_interface_vhost_user_dump. But it was never implemented in the backend. This patch is to add the backend, vat, and custom dump support for the filter. Type: feature Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: Iaa41a7e11bfbcbb4c60092375e4b0dcf0950077b
2020-06-16gso: fix the udp checksum in testMohsin Kazmi3-15/+10
Type: fix Change-Id: I7005e4763e73f3679c40f94bdab26d439cd23188 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2020-06-15api: check id is valid for bounce checkingBenoît Ganne1-1/+1
If the id is invalid we cannot check whether we must free the message or not, free it anyway. Type: fix Change-Id: Ie4426f601390d1e5e14c739f670e8c1e6e3aaf1e Signed-off-by: Benoît Ganne <bganne@cisco.com>
2020-06-15build: remove un-needed scriptSimon Chatterjee2-308/+1
The move to cmake obviates the need for this build script (and its terminology). Type: make Signed-off-by: Simon Chatterjee <code@chatts.net> Change-Id: Ie17429bfdf5a4b02ce2b70ba3568a7445c162d38
2020-06-15vcl: move helper functions out of header fileFlorin Coras4-101/+105
Type: improvement Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I3889fd80b145cf80f76f6054d63247e76bdf20ff