Age | Commit message (Collapse) | Author | Files | Lines |
|
Type: docs
Change-Id: Id1972fd1d0769f26ee73db326c22c6a57eb6ceab
Signed-off-by: Yu Ping <ping.yu@intel.com>
|
|
Fix a bug that caused some input packets to be dropped due to errors of
the type 'ip4 length > l2 length'. The change is related to the second
call to the rdma_device_input_bufs() function that happens when the end
of the ring buffer is reached.
Type: fix
Change-Id: I332d69ab22242b3443a0baca6e5dd86349a54765
Signed-off-by: Elias Rudberg <elias.rudberg@bahnhof.net>
|
|
Type: feature
Signed-off-by: Simon Zhang <yuwei1.zhang@intel.com>
Change-Id: I1d4fe75e5faf3fa2086d11020828345b173ebd03
|
|
Add an ALWAYS_ASSERT (...) macro, to (a) shut up coverity, and (b)
check the indicated condition in production images.
As in:
p = hash_get(...);
ALWAYS_ASSERT(p) /* was ASSERT(p) */
elt = pool_elt_at_index(pool, p[0]);
This may not be the best way to handle a specific case, but failure to
check return values at all followed by e.g. a pointer dereference
isn't ok.
Type: fix
Ticket: VPP-1837
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: Ia97c641cefcfb7ea7d77ea5a55ed4afea0345acb
|
|
Type: refactor
Change-Id: I04e71a64e676910dc4c6cbc1ab54ffb0c29aa5b9
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
ip4 gtpu cli/api (using flow infra) to create flows and enable them on
different hardware (currently tested with ice)
to offload a gtpu tunnel onto hw:
set flow-offload gtpu hw TwentyFiveGigabitEthernet3/0/0 rx gtpu_tunnel0
to remove offload:
set flow-offload gtpu hw TwentyFiveGigabitEthernet3/0/0 rx gtpu_tunnel0 del
TODO:ipv6 handling
Type: feature
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: I8e356feeb0b16cfeadc1bbbe92f773aa2916e715
|
|
Type: improvement
IKE will bring the tunnel up ince the negociation is complete and bring
it down when the session ends. It is the clinets responsibility to
manage the state of the tunnel before and after these events. So to
prevent any unencrpyted traffic egressing the tunnel before the session
is negpciated, the tunnel should be in the down state when it a
associated with the IKE session.
Change-Id: I8aee593c79ca006d6ab08f9fa560fbbf6f8dcc16
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
vpclmulqdq is introduced on intel icelake architecture and
allows computing 4 carry-less multiplications in paralled by using
512-bit SIMD registers
Type: feature
Change-Id: Idb09d6f51ba6f116bba11649b2d99f649356d449
Signed-off-by: Damjan Marion <damjan.marion@gmail.com>
|
|
Use below sysfs files to check which numa node a specific cpu_id belongs to.
/sys/devices/system/node/online
/sys/devices/system/node/node0/cpulist
/sys/devices/system/node/node1/cpulist
Type: fix
Change-Id: I124b80b1fd4a20dd7bd76f0ae27d5ab23a3a8ff1
Signed-off-by: Lijian Zhang <Lijian.Zhang@arm.com>
|
|
Type: fix
Signed-off-by: Simon Zhang <yuwei1.zhang@intel.com>
Change-Id: I19cdd2055ea494fc36628b4a94fc56742c1d1a8a
Signed-off-by: Simon Zhang <yuwei1.zhang@intel.com>
|
|
Type: fix
Change-Id: I1a20fea56f1ba1fada7c7ce96ea333bf097b1273
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: fix
Change-Id: I50329bda365d98f9f9d56a58187fb4fb2a4eb461
Signed-off-by: Yu Ping <ping.yu@intel.com>
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Id931f3f308a01788d222d0d62f26f5c579321c6a
|
|
Type: docs
Change-Id: I171903bd3fd3219ad0e1ebd79a6dbf6f094d9cb8
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I60be191866d20721951ad22f571a2a3275511e12
|
|
Type: fix
Ticket: VPP-1837
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I0d164147173b452fee7e720e01e6a9991f43b64a
|
|
While TSO is supported for Intel NIC, Cisco VIC does not work.
The problem is due to txmode offloads is not properly set for
the Cisco VIC when enable-tcp-udp-checksum is configured.
Type: fix
Ticket: VPP-1838
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I72c41db9b327ed8d08ef70d74e8cc6206d4a102f
|
|
Type: fix
this patch fixes mark flow deletion crash issue, see below
test flow add src-ip any proto udp src-port 111 dst-port 222 mark 100
test flow enable index 0 1/1
test flow disable index 0 1/1
test flow enable index 0 1/1
test flow disable index 0 1/1 -> [crash]
This is because the code resets a wrong vector in flow lookup entry
recycle logic. See function dpdk_flow_ops_fn().
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: I2b0a1e531931ab25541d672d88da18dc2289f1ce
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I7a4a4a52c3e4ad47aabb2ef5f53a0e0bb7e71690
|
|
Type: feature
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I9dafe564229095d50285276a654f4983f93faff2
|
|
Type: refactor
Change-Id: I61e25942de318d03fb3d75689259709d687479bc
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I756170bd799d1f482186cbb4b5dff9373ae6e08f
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Idb513232e7b091c8f767726bfa1deb10a7e3b751
|
|
Type: feature
Add a new plugin to support HA using VRRPv3 (RFC 5798).
Change-Id: Iaa2c37e6172f8f41e9165f178f44d481f6e247b9
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
This allows us to combine 2 XOR operations into signle instruction
which makes difference in crypto op:
- in x86, by using ternary logic instruction
- on ARM, by using EOR3 instruction (available with sha3 feature)
Type: refactor
Change-Id: Ibdf9001840399d2f838d491ca81b57cbd8430433
Signed-off-by: Damjan Marion <damjan.marion@gmail.com>
|
|
Can happen if a connection is reset before fully accepted.
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I0ae68d71b66722dd19ca6f1cee44a080e5ff4447
|
|
Type: feature
Change-Id: I4f96b0af13b875d491704b010328a1814e1dbda1
Signed-off-by: Damjan Marion <dmarion@me.com>
|
|
In some cases of using vfio-pci driver, it should be required
to enable pa or va mode. Without it, rtl_eal_init unable to
allocate memory required. Debugging told that iova-mode pa/va
could help. And it helps.
This patch allows to pass iova-mode to vpp startup.conf
Type: feature
Change-Id: I36b87f5d3d141891b37cda2c306d50433954a34a
Signed-off-by: Vladimir Ratnikov <vratnikov@netgate.com>
|
|
Type: fix
Change-Id: I6011f5d6eae79019d3c16a260a9bedf0a76d2151
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: feature
Change-Id: Iee84f94c617c53658f13c5430b945568c5e06ce9
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: improvement
Change-Id: I1f204685ea9374389fc24fc53184ce06806beed3
Signed-off-by: Damjan Marion <dmarion@me.com>
|
|
For debugging. Do not set this option in production.
Type: feature
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I5e59671c4932e064bc087b85bf9c62c6f3bf48cf
|
|
Null pointer bug, memory leak. D'oh!
Type: fix
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: Ic2865757ed9cbb7f48d23c7c30b64299eb5f6674
|
|
For people tired of typen CLIB_CACHE_LINE_BYTES....
Type: improvement
Change-Id: I7658a8525ff6e3edc81a29b05a6fda33e537806e
Signed-off-by: Damjan Marion <dmarion@me.com>
|
|
Type: improvement
Change-Id: I310e421513e9d3f96ad7debc72c9407e231962b8
Signed-off-by: Damjan Marion <dmarion@me.com>
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ie356b4d45d47e30c185caf2e66cdb16f1a97046f
|
|
Type: refactor
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I06cc3f032a72eacc716eed8d6fe8856a2839def1
|
|
Type: refactor
Change-Id: I1d594af6d7c0d065d5c2decc5b22d549189b1882
Signed-off-by: Damjan Marion <dmarion@me.com>
|
|
Faster and more portable...
Type: improvement
Change-Id: I915f8d3c45d1ba76ddfdbfac98482b04c98d148b
Signed-off-by: Damjan Marion <dmarion@me.com>
|
|
Type: improvement
Change-Id: Ibfa756f5f489882bc2ac658ae4d238e98da73875
Signed-off-by: Damjan Marion <dmarion@me.com>
|
|
Type: refactor
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Id09fa54cc5657b3b5616ea6a6180c1344b0141d4
|
|
Type: refactor
Change-Id: I76733a9ed362ec60badd22c0fbc2a9c5749da88d
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
Change-Id: I5c81d2f55057f5fba780cb12154a3fb1aef79f20
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
The mheap allocator has been turned off for several releases. This
commit removes the cmake config parameter, parallel support for
dlmalloc and mheap, and the mheap allocator itself.
Type: refactor
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I104f88a1f06e47e90e5f7fb3e11cd1ca66467903
|
|
Type: fix
Ticket: VPP-1837
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I6b1ea13fc83460bf4ee75cb9249d83dddaa64ded
|
|
Type: feature
... rather than always creating a new interface.
Change-Id: If8a22ad5a8a3a4e511bea7cab7d8bbf7e6af9433
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
Change-Id: I3b39c17d9cfadc1d383d9c4dba9029ea279d09d7
Signed-off-by: Damjan Marion <dmarion@me.com>
|
|
Type: improvement
Change-Id: Ib2cb708fdcb14fdea9298c10d67f8fe73887f18b
Signed-off-by: Damjan Marion <dmarion@me.com>
|
|
Type: feature
Change-Id: Ie072a7c2bbb1e4a77f7001754f01897efd30fc53
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Idaa7cc26ad941be86daec4ed5920727237712f4a
|