Age | Commit message (Collapse) | Author | Files | Lines |
|
Type: improvement
Currently, if an error happens on the netlink notification socket, the
socket gets reopened. A portion of notification messages have been lost
because of this and will never arrive on the socket. VPP will be out of
sync with the kernel networking state.
With this change, synchronize VPP state and the kernel networking state
if there was an error polling or reading the notification socket.
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: I8cdff89b505cd227535a0acaadb6ee757204c45e
|
|
Type: refactor
check for pool expansion in the DPO allocation, just in case.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I6ba7dd66313630d3f24a51700ab4486ba43d856b
|
|
Type: improvement
For some message types, timestamps are checked on netlink message to
decide whether the message should be applied. For notification messages
timestamps are expected to be always available.
With this change, before accessing the timestamp, make sure the message
info object that carries it is not null. If it is null, pass the check.
This is to be ready to process dump replies that will not need the
timestamp check and will have the message info object set to null.
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: Ic7211c0d451d72f6a5248898b3a8f8e0bca8f7aa
|
|
Type: fix
Currently, a tap interface created to be a member of a linux-cp pair has
default link state (down) and default link speed (10Mb/s). Then the
plugin monitors the link state of the paired hardware interface and if
it changes, the new link state is reflected on the tap interface. And
when the new link state is "up", the link speed is also reflected on the
tap interface.
The problem is that this scheme implies that the hardware interface's
link state is "down" at the moment of the linux-cp pair creation and
then changes. But there are cases when the link state is already "up" at
that moment. If that is the case, the link speed on the tap interface
will remain the default one until the link comes down and then comes up.
With this fix, when a linux-cp pair is created, reflect current link
state of the hardware interface being paired on the created tap
interface.
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: I73664d753f4daaa6d439c9ca898fb7363d21c06d
|
|
Some possible side effects for multicast routes appears to be in
lcp_router_table_add_or_lock. so ff00/8 route will be processed
for ospf purposes the right way
Ignore IPv6 kernel routes
Skip adding auto routes into FIB
Type: fix
Signed-off-by: Vladimir Ratnikov <vratnikov@netgate.com>
Change-Id: I35f73d629a7fffca7f7d4547adc2549b72c2048f
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I0982f0f5c8186f9ed962db49a14f35aa19f6a276
|
|
Include the user_instance in wireguard interface details.
In addition to dumping all wireguard interface details,
also allow selective dumping of just one interface.
Type: improvement
Signed-off-by: Jon Loeliger <jdl@netgate.com>
Change-Id: Iaf1093c6ae3eb00a685f34b2e0171285b02fae2b
|
|
Type: fix
Fixes: 1cd0e5dd533f4209dde453eaa43215e52cd42985
Change-Id: I64318585fb3b12369b78735c681f3b747c67b53b
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
When building a VPP library out of tree using add_vpp_library, the build
sometimes fails because the library API files are not necessarily
generated before compiling this library.
This is fixed by adding the lib API files as dependencies of the
lib compilation.
Type: fix
Signed-off-by: Guillaume Solignac <gsoligna@cisco.com>
Change-Id: I69dffaecbfd547f10115504494a47358c4624258
|
|
Useful for stress testing.
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I0b1701682494a9fbf7deac311b4afd3036c50b56
|
|
Type: refactor
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: I3788cc857023fafcc8eb6d6ff4524425026a75d8
|
|
- cli_inband is missing from vat2
Type: improvement
Change-Id: I1f22dee3ee29f3cf0f1f7c6076d5f2b2b2bf969d
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: If5eed7dac4951f0510a4b4b092f66f44d0d3cacd
|
|
Type: fix
Signed-off-by: Saravanan Murugesan <sarmurug@cisco.com>
Change-Id: Icfd5e3c0bb034684c7bc43be46927294536ba08a
|
|
Type: fix
Signed-off-by: Saravanan Murugesan <sarmurug@cisco.com>
Change-Id: I5f7f4b925b3d250c5b8616d1fb35edbde50a7a23
|
|
type: docs
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: I32291160f0d22a804929d0a040472ff952f02544
Signed-off-by: Maciek Konstantynowicz <mkonstan@cisco.com>
(cherry picked from commit 7911f29c518c6b2a678e13874f7f16eba03dab75)
|
|
- A call to vapi_msg_control_ping_hton() is generated in
a static inline function in vlib.api.vapi.h, which is
defined/generated in memclnt.api.vapi.h without
including memclnt.api.vapi.h in vlib.api.vapi.h.
This breaks the compilation of plugins which include
only vlib.api.vapi.h (e.g. hicn_plugin from the HICN
project).
Type: fix
Fixes: a1400cecb
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: I5574f4ed496183ea93265f493bf3624254a865a2
|
|
The app keeps on using the default app ns but each listen will be done
in the vrf configured.
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I0947e03188d55231b299916351115038e0b1f5da
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ibe92497cc5446ac5c734f8fe5c63c0167204dd09
|
|
This fixes an issue caused by session layer reading expected part of
data (cert + key) before the client actually sends it.
Type: fix
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Change-Id: I6ddddb08f9576211b302e814d7c2b040383e5fb7
|
|
Raise a new UnexpectedPacketErrror, when a packet is captured
unexpectedly. This pretty-prints a terse description of said packet.
Type: improvement
Signed-off-by: Klement Sekera <klement.sekera@gmail.com>
Change-Id: Ibac19fc5bbd82a150fec3c90940a37af6344fd4f
|
|
- HICN project's hicn_plugin requires vnet header files
fib/fib_entry_track.h and udp/udp_encap.h to be
included in build-root/install-vpp*-*/vpp/include/vnet
Type: fix
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: Iabd3f8fe0aee8d727758fc6ef202e859d68d63a3
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I925618e426b325f4fafb9ed39a2d7c2d7c7b38f3
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I37ff8099c6c8044881379b4cd47ca8843746c315
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ie89326ed4e599231fc20de67c5dadbb428568bec
|
|
Type: fix
Fixed coverity-issue CID 248517.
Originally possible passing null pointer to one function and directly
dereferences it.
This patch fixes the issue by add a new condition to check this
pointer.
Change-Id: If506abaf08c9f003860b641971af291f68613c18
Signed-off-by: Gabriel Oginski <gabrielx.oginski@intel.com>
|
|
Type: fix
Fixes: 39e9428b90bc
When a VRRP advertisement is received by a worker thread, the worker
calls vl_api_rpc_call_main_thread() so the main thread will process the
packet and make adjustments to VR state if necessary.
The data being passed to the main thread included a pointer to the VRRP
header in the received packet buffer. Since the main thread processes
the RPC request asynchronously from the worker thread, it's possible for
the worker to drop the packet and for the buffer to be overwritten before
the main thread can process it.
Copy the fields which may be needed by the main thread into a struct
instead of passing a pointer to a packet buffer.
Change-Id: I4e899e967df5a54776b521825a80e9cce1a94f5f
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Integer math on 32 bytes of base64 data might yield 33 bytes
of data in some poorly formed user input of private key values.
Rather than smashing the stack (detected) and aborting, simply
allow for the possible yet irrelevant 33-rd byte of data.
Type: fix
Fixes: edca1325cf296bd0f5ff422fc12de2ce7a7bad88
Change-Id: I42acfbf3e8fbb3d517e21c53d4f80459d4800e9d
Signed-off-by: Jon Loeliger <jdl@netgate.com>
|
|
Type: fix
otherwise the feature is enabled n times for n lcp-pairs and the packets go n times through the feature.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I8e47e4a293d6e2711f54aa09e9545e5e07728026
|
|
Revert "vxlan: crash on configuring vxlan tunnel on l3 mode"
This reverts commit b8de7d43e4955bb4025cd0e0e7390279841b6d7d.
Reason for revert: VPP-2014
Type: fix
Fixes: b8de7d43e4955bb4025cd0e0e7390279841b6d7d
Change-Id: Ic4d10f28985ee10e0550a1bbfd465ada915e4aa6
Signed-off-by: Ed Warnicke <hagbard@gmail.com>
|
|
adj_get() crashed in worker thread. The index is valid but was freed.
0x00007fba5fb07921 in __GI_abort () at abort.c:79
0x00007fba528de7c3 in os_panic () at /development/libvpp/src/vpp/vnet/main.c:618
0x00007fba506f2a19 in debugger () at /development/libvpp/src/vppinfra/error.c:84
0x00007fba506f2797 in _clib_error (how_to_die=2, function_name=0x0, line_number=0, fmt=0x7fba521cecd9 "%s:%d (%s) assertion `%s' fails") at /development/libvpp/src/vppinfra/error.c:143
0x00007fba51d88254 in adj_get (adj_index=79) at /development/libvpp/src/vnet/adj/adj.h:472
0x00007fba51d87642 in icmp6_neighbor_solicitation_or_advertisement (vm=0x7fb9f19a0580, node=0x7fb9bb820340, frame=0x7fb9b718bc40, is_solicitation=0) at /development/libvpp/src/vnet/ip6-nd/ip6_nd.c:134
0x00007fba51d8f479 in icmp6_neighbor_advertisement (vm=0x7fb9f19a0580, node=0x7fb9bb820340, frame=0x7fb9b718bc40) at /development/libvpp/src/vnet/ip6-nd/ip6_nd.c:348
Type: fix
Signed-off-by: Rajith P R <rajith@rtbrick.com>
Change-Id: Ibe29854137ee9680f7947450eb7e256b8c0ade31
|
|
mpls fib DB size was 2^20 instead of intended 2^21.
Therefore large mpls labels caused DB to overflow and write
to other tables or some random objects. Or crash with ASAN.
Sometimes.
Type: fix
Signed-off-by: Dmitry Valter <d-valter@yandex-team.ru>
Change-Id: I6db65680037a266fe47e8213464a0c16de63c06c
|
|
Type: fix
Fixes: 6fdcc3d
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I820c505482801ff2ab8dac41a0016bb3a741a4ee
|
|
Add support for inline packet counter verification to send_and_* functions.
Diff dictionary is a dictionary of dictionaries of interesting stats:
diff_dictionary =
{
"err" : { '/error/counter1' : 4, },
sw_if_index1 : { '/stat/segment/counter1' : 5,
'/stat/segment/counter2' : 6,
},
sw_if_index2 : { '/stat/segment/counter1' : 7,
},
}
It describes a per sw-if-index diffset, where each key is stat segment
path and value is the expected change for that counter for sw-if-index.
Special case string "err" is used for error counters.
This then allows more precise packet counter verification by first
defining a "zero" dictionary, e.g. for ED NAT:
cls.no_diff = StatsDiff({
pg.sw_if_index: {
'/nat44-ed/in2out/fastpath/tcp': 0,
'/nat44-ed/in2out/fastpath/udp': 0,
'/nat44-ed/in2out/fastpath/icmp': 0,
'/nat44-ed/in2out/fastpath/drops': 0,
'/nat44-ed/in2out/slowpath/tcp': 0,
'/nat44-ed/in2out/slowpath/udp': 0,
'/nat44-ed/in2out/slowpath/icmp': 0,
'/nat44-ed/in2out/slowpath/drops': 0,
'/nat44-ed/in2out/fastpath/tcp': 0,
'/nat44-ed/in2out/fastpath/udp': 0,
'/nat44-ed/in2out/fastpath/icmp': 0,
'/nat44-ed/in2out/fastpath/drops': 0,
'/nat44-ed/in2out/slowpath/tcp': 0,
'/nat44-ed/in2out/slowpath/udp': 0,
'/nat44-ed/in2out/slowpath/icmp': 0,
'/nat44-ed/in2out/slowpath/drops': 0,
}
for pg in cls.pg_interfaces
})
and then to specify only changed counters directly when calling
one of send_and_* functions:
self.send_and_assert_no_replies(
self.pg0, pkts, msg="i2o pkts",
stats_diff=self.no_diff | {
"err": {
'/err/nat44-ed-in2out-slowpath/out of ports': len(pkts),
},
self.pg0.sw_if_index: {
'/nat44-ed/in2out/slowpath/drops': len(pkts),
},
}
)
operator | is overloaded by StatsDiff class to perform a deep merge operation,
so in above case, dictionaries for "err" and self.pg0.sw_if_index do not
overwrite whole sub-dictionaries, rather the contents are merged,
assuring that all the remaining counters are verified to be zero.
Type: improvement
Signed-off-by: Klement Sekera <klement.sekera@gmail.com>
Change-Id: I2b87f7bd58a7d4b34ee72344e2f871b2f372e2d9
|
|
Type: improvement
Signed-off-by: Klement Sekera <klement.sekera@gmail.com>
Change-Id: I5e0fd1019372df0cd403725b8cac52363af13718
|
|
Some tests might want to keep vpp config in between test functions.
Add a flag to allow that.
Type: improvement
Signed-off-by: Klement Sekera <klement.sekera@gmail.com>
Change-Id: I90243cd667dce922b43b381f3d52f4ac0f6bf3a7
|
|
TCP/UDP packets which are dropped are not counted towards TCP/UDP
counters. Apply same behaviour to ICMP packets.
Type: improvement
Signed-off-by: Klement Sekera <klement.sekera@gmail.com>
Change-Id: I487fa7135ac8e49431a621fac213638d2dab31c8
|
|
Type: fix
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Change-Id: I4ede67c901456d57e457c648d28153423d45fb41
|
|
Breakdown the distribution of uops delivered to the frontend.
Collerates directly with the source of the uops.
Type: improvement
Signed-off-by: Ray Kinsella <mdr@ashroe.eu>
Change-Id: I93a57dbe56dfa0f378527844aa4e63f45a548e55
|
|
Type: feature
Signed-off-by: Vladimir Ratnikov <vratnikov@netgate.com>
Change-Id: I2fd12a5b30aacdbaecb9156b829bfc06dfea377f
|
|
Type: improvement
remove the [un]lock logs, they are not useful.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I903d3088b8ed9831f931208aeb6b6862a945550c
|
|
This is required after distinguishing between max_frame_size and MTU
Type: fix
Signed-off-by: Artem Glazychev <artem.glazychev@xored.com>
Change-Id: Ie642bee4e30ca76903bb8be5eeb6914c2c09bf35
|
|
Type: fix
Fixed coverity-issue CID 248517.
Originally possibly passing null pointer to one function and
directly dereferences it.
This patch fixes the problem by add a new condition.
Signed-off-by: Gabriel Oginski <gabrielx.oginski@intel.com>
Change-Id: I02fc6fb5d1cfd6138ea4ba2b1946fd8a7ef34d3b
|
|
Type: test
there were multiple instances of send_and_expect_load_balancing
and a send_and_expect_one_itf which has the same functionality as send_and_expect_one.
Put one implementation of both in framework.py (where the other send_and_X functions reside).
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I7f629d440220bee29368067f475059322e1134f7
|
|
Originally after remove the policy entry in spd, macro "vec_del1"
can change localization of the last entry in vector and finally the
entry list has not been sorted.
This patch fixes this issue by change executed macro "vec_delete"
instead of "vec_del1".
Type: fix
Signed-off-by: Gabriel Oginski <gabrielx.oginski@intel.com>
Change-Id: I396591cbbe17646e1d243aedb4cdc272ed4d5e25
|
|
If the user supplies an instance number when creating a wireguard
interface, it should be used in the device name. If no user-instance
is given, the device instnce (tunnel number) is used.
For example:
vpp# wireguard create instance 17 listen-port 23023 src 1.2.3.4
private-key MDEwMjAzMDQwNTA2MDcwODA5MTAxMTEyMTMxNDE1MTY=
wg17
Type: fix
Fixes: edca1325cf296bd0f5ff422fc12de2ce7a7bad88
Signed-off-by: Jon Loeliger <jdl@netgate.com>
Change-Id: Ibf51868bf7b4b9e8a3f85557d05667207873bc91
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: If5e6d0e8c686ea93674d6201c38b3a4d1c4786a5
|
|
Implement command line argument parsing instead of passing arguments via
environment variables. Add script for running tests without having to
invoke make. Deprecate running tests via make.
Type: improvement
Change-Id: I2e3054a61a2ae25d460e9be00be7d7705fbf943e
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
Supported only when eventfd option is enabled.
Type: feature
Change-Id: Ic9d6e38604e978f7bc8e54d74fe9b8f3fc53622d
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Type: refactor
To be consistent with the location of the IPv4 responder
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: Ie3a5c3ecc10755317591d7ff57b74770c2798e77
|