summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2018-10-22ipsec: split ipsec nodes into ip4/ip6 nodesKlement Sekera15-390/+764
Change-Id: Ic6b27659f1fe9e8df39e80a0441305e4e952195a Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-10-22dpdk: use rte_vfio_dma_map API instead of digging for vfio fdDamjan Marion1-63/+17
This is new API introduced in DPDK 18.08. Change-Id: I66d49fe54a6abf2af621b597e8d4535e29cecec4 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-10-22lisp-gpe: register udp port only if enabled (VPP-1468)Florin Coras1-5/+7
Change-Id: I7d0930a19d927bbd7ba3fc879d5a0c8064827629 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-10-21tcp: count first lost hole (VPP-1465)Florin Coras2-17/+46
Change-Id: I3ac136e2a10796d8fa86ddb6f0d6cabe5fa749f8 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-10-20dpdk: add netvsc PMDStephen Hemminger3-1/+40
Teach DPDK plugin about the netvsc Poll Mode Driver. The speed of the Netvsc device matches the speed of the external port on the underlying vswitch. Therefore 1G, 10G, 25G, 56G and even 100G are possible. Change-Id: I14ab6907b7d8d350b63a083409d45fb9c348a364 Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
2018-10-20dpdk: turn off unused DPDK componentsStephen Hemminger1-0/+17
DPDK has added a lot more drivers and config options that are not used by current VPP code. Change-Id: I385f8b5df02b95a31ca9abe506c79cf52e99a24c Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
2018-10-20acl-plugin: use the L2 feature arc infrastructure instead of L2 classifier ↵Andrew Yourtchenko4-699/+312
for plumbing This makes ACL plugin use the new feature arcs, which slightly increases performance. Since for ethertype whitelisting we were using the L2 classifier, to retain the functionality, make a simple node doing that, and plug it into non-ip L2 feature arc whenever needed. Change-Id: I3add377a6c790117dd3fd056e5615cb4c4438cf4 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2018-10-20pipes: fix the l2.l2_len and the l[23]_hdr_offset setting behavior of ↵Andrew Yourtchenko1-29/+30
pipe-rx node to match that of ethernet-input node Since pipe-rx is a sibling node of ethernet-input, it ought to perform similarly: set l2/l3 header offsets, and l2.l2_len value if the interface is in the l2 mode. The use cases of pipes do not assume the tagged traffic, so assume the simple ethernet header. Change-Id: I7c9b5f4f2b1402cfbd10513f76cdd59b2db7a7a6 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2018-10-20dpdk: use rx/tx_offload_names to formatStephen Hemminger1-38/+53
Rather than keeping our own list of offload capabalities, use the function in 18.08 or later to decode the value. Also, introduce a formatter to convert to lower case because DPDK API returns upper case names. Change-Id: I87546fa2bec67f8a8b44288f5994514114cb6faf Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
2018-10-19avf: fix crash in rss key calculationDamjan Marion1-1/+1
Change-Id: Id13a0b6ed54885babf679f05207170e36709d9fa Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-10-19vppinfra: use memfd_create for hugepage mounts if supportedDamjan Marion2-25/+52
Starting with kernel 4.14 hugepage fd can be retrieved with memfd_systemcall Change-Id: I0f3bd6d0a7757ffe7b98e83763502013ac763ecb Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-10-19NAT44: fix ICMP virtual fragmentation reassembly (VPP-1466)Matus Fabian5-172/+144
Change-Id: I8006bca02948d9121f474a3d14f0576747bb3c51 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2018-10-19vppinfra: add atomic macros for __sync builtinsSirshak Das40-130/+162
This is first part of addition of atomic macros with only macros for __sync builtins. - Based on earlier patch by Damjan (https://gerrit.fd.io/r/#/c/10729/) Additionally - clib_atomic_release macro added and used in the absence of any memory barrier. - clib_atomic_bool_cmp_and_swap added Change-Id: Ie4e48c1e184a652018d1d0d87c4be80ddd180a3b Original-patch-by: Damjan Marion <damarion@cisco.com> Signed-off-by: Sirshak Das <sirshak.das@arm.com> Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com> Reviewed-by: Ola Liljedahl <ola.liljedahl@arm.com> Reviewed-by: Steve Capper <steve.capper@arm.com>
2018-10-19Add pool_get_zero, pool_get_aligned_zero macrosDave Barach1-1/+13
Shorthand for the pattern: pool_get (<pool>, ep); memset (ep, 0, sizeof(*ep)); Should have done this years ago. Change-Id: Ideeb27a79ff4ca3e9a077c973b297671d1fa2d26 Signed-off-by: Dave Barach <dave@barachs.net>
2018-10-18tcp: fix sacks lost bytes counting (VPP-1465)Florin Coras2-50/+118
Change-Id: Ie46b3a81de4ed39b7b40e3879436f7e5a2908d98 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-10-18tls: fix connection failures/interrupts at scale (VPP-1464)Florin Coras5-29/+45
Change-Id: I0bc4062c1fd3202ee201acb36a2bb14fc6ee1543 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-10-18tcp: fix cleanup of non established connections (VPP-1463)Florin Coras2-1/+5
- fix delete of connection in syn-received - fix delete of half-open connection Change-Id: I72ff4b60406a2762d998328c52f41adea40d2c1b Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-10-18Ping; remove unused arraysNeale Ranns1-3/+0
Change-Id: I104f2b4e0b1c354d3671962be3f6002f2721388d Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-10-18PAPI: Expose API enums to tests / applicationsOle Troan4-68/+106
e.g: from vpp_papi import VppEnum VppEnum.vl_api_address_family_t.ADDRESS_IP4 Change-Id: I10c22d57234a1a06e98a889cf80b19085b468ed3 Signed-off-by: Ole Troan <ot@cisco.com>
2018-10-18Update version (18.10) for API changes scriptMarco Varlese1-2/+2
Change-Id: I41d22bfc87849e923628de08f922f7a541579fe1 Signed-off-by: Marco Varlese <marco.varlese@suse.com>
2018-10-17vxlan:decap caching error (VPP-1462)Eyal Bari1-1/+1
Change-Id: I3ef0725684bcb8ea526abe0ce62562b35a0070f5 Signed-off-by: Eyal Bari <ebari@cisco.com> (cherry picked from commit 0d87894bf279a4678cfca6cc438583090b166f85)
2018-10-17fix ip6 prefix check for tap_v2Michal Cmarada1-1/+1
Change-Id: Ifbb1393fc3c50c140c09e8baedcd4a92189ba56e Signed-off-by: Michal Cmarada <mcmarada@cisco.com>
2018-10-17Update to doxygen documentation for release 18.10Marco Varlese1-0/+2
Change-Id: Id8eebd59bad27ac3cc46bf993a5ca1d8410bf84c Signed-off-by: Marco Varlese <marco.varlese@suse.com> (cherry picked from commit 44c6ca6038776787671e78e3dae78e812c72429e)
2018-10-17IP Route add/del API is MP safeNeale Ranns1-0/+6
Change-Id: I0bfa4c9a3bb22155d7862cc13019cb172e77407c Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-10-17tcp: fix multiple fin retries (VPP-1461)Florin Coras2-10/+10
Change-Id: I1be7c59df7b48875f81ebeebf5f39ed15a43d2d8 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-10-17stats: vpp_get_stats missing last interface in dumpOle Troan1-2/+2
Change-Id: Ie1fa560cb255a9b13ddb4929da8f33286a8c137e Signed-off-by: Ole Troan <ot@cisco.com>
2018-10-17acl-plugin: tuplemerge: refresh the pointer to hash-readied ACL entries per ↵Andrew Yourtchenko1-0/+2
each collision in split_partition() (VPP-1458) A pointer to hash-ready ACL rules is only set once, which might cause a crash if there are colliding entries from more than one ACL applied. Solution: reload the pointer based on the element being processed. Change-Id: I7a701c2c3b4236d67293159f2a33c4f967168953 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com> (cherry picked from commit 84112dd4f98e5a31a8c7340a741f89e77fd03363)
2018-10-17tcp: avoid sack processing when not needed (VPP-1460)Florin Coras3-4/+7
Change-Id: If81ee34e1f1e929de1a5b758ddb9aede4002e858 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-10-17bond: tx optimizationsDamjan Marion4-307/+342
Break up bond tx function into multiple small workloads: 1. parse the packet header and hash it based on the configured algorithm 2. optionally, trace the packet 3. convert the hash value from (1) to the slave port 4. update the buffers with the slave sw_if_index 5. Add the buffers to the queues 6. Create and send the frames old numbers ----------- Time 5.3, average vectors/node 223.74, last 128 main loops 40.00 per node 222.61 vector rates in 3.3627e6, out 6.6574e6, drop 3.3964e4, punt 0.0000e0 Name State Calls Vectors Suspends Clocks Vectors/Call BondEthernet0-output active 68998 17662979 0 1.89e1 255.99 BondEthernet0-tx active 68998 17662979 0 2.60e1 255.99 TenGigabitEthernet3/0/1-output active 68998 8797416 0 1.03e1 127.50 TenGigabitEthernet3/0/1-tx active 68998 8797416 0 7.85e1 127.50 TenGigabitEthernet7/0/1-output active 68996 8865563 0 1.02e1 128.49 TenGigabitEthernet7/0/1-tx active 68996 8865563 0 7.65e1 128.49 new numbers ----------- BondEthernet0-output active 304064 77840384 0 2.29e1 256.00 BondEthernet0-tx active 304064 77840384 0 2.47e1 256.00 TenGigabitEthernet3/0/1-output active 304064 38765525 0 1.03e1 127.49 TenGigabitEthernet3/0/1-tx active 304064 38765525 0 7.66e1 127.49 TenGigabitEthernet7/0/1-output active 304064 39074859 0 1.01e1 128.51 Change-Id: I3ef9a52bfe235559dae09d055c03c5612c08a0f7 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-10-17VPP-1459:Ip4 lookup fail when exist prefix cover.mu.duojiao1-3/+1
Change-Id: I4ba0aeb65219596475345e42b8cd34019f5594c6 Signed-off-by: mu.duojiao <mu.duojiao@zte.com.cn>
2018-10-16tls: fix multi threaded medium scale test (VPP-1457)Florin Coras7-11/+52
- ensure session enqueue epoch does not wrap between two enqueues - use 3 states for echo clients app, to distinguish between starting and closing phases - force tcp fin retransmit if out of buffers while sending a fin Change-Id: I6f2cab46affd1148aba2a33fb6d58bcc54f32805 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-10-16PAPI: Add bool type support in vppapigen.Ole Troan1-0/+2
Change-Id: I9c2eaa2ee04a1c9a92018afb92cb2c5610df2991 Signed-off-by: Ole Troan <ot@cisco.com>
2018-10-16PAPI: Add timeout support for socket transportOle Troan1-3/+6
Change-Id: I0402989e0ac738cab2f918e6e3d73c571457c08e Signed-off-by: Ole Troan <ot@cisco.com>
2018-10-16FIB: use vlib-log for debuggingNeale Ranns15-149/+237
Change-Id: I9052202b8cbcf656e61d635253d515f0f3a8d145 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-10-16Fix coverity issue for potentially overflowing of page sizeHaiyang Tan6-10/+11
Change-Id: I2779626d745badb63386efcf729da7a094a4f297 Signed-off-by: Haiyang Tan <haiyangtan@tencent.com>
2018-10-16Ping; report failures to the terminalNeale Ranns2-14/+39
Change-Id: Icd48de31302f62c59961c573699a1dd0474b8acb Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-10-16vcl: fix bidirectional tests (VPP-1455)Florin Coras4-37/+41
- add epoll dequeued events beyond maxevents to unhandled - filter multiple epoll rx events Change-Id: I618f5f02b19581473de891b3b59bb6a0faad10b5 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-10-16IGMP: proxy deviceJakub Grajciar17-12/+848
Create 'proxy device' per VRF and add one upstream and one or many downstream interfaces. Change-Id: I1cef05fb01e73a5b483c7a2f4debaaeffe2c8155 Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2018-10-16vmxnet3: show vmxnet3 with filtering capability [VPP-1452]Steven3-12/+234
show vmxnet3 desc may display 5000 lines of output since it has 5 tables. Each table may have 1000 entries. It would not be very useful to debug problem. We need filtering capability for the subject show command. We need to be able to display the descriptor table per interface, per interface per table, and per interface per table per slot. The latter is the most useful. tested the following valid combinations show vmxnet3 show vmxnet3 desc show vmxnet3 vmxnet3-0/13/0/0 show vmxnet3 vmxnet3-0/13/0/0 desc show vmxnet3 vmxnet3-0/13/0/0 rx-comp show vmxnet3 vmxnet3-0/13/0/0 rx-comp 1 show vmxnet3 vmxnet3-0/13/0/0 tx-comp show vmxnet3 vmxnet3-0/13/0/0 tx-comp 1 show vmxnet3 vmxnet3-0/13/0/0 rx-desc-0 show vmxnet3 vmxnet3-0/13/0/0 rx-desc-0 1 show vmxnet3 vmxnet3-0/13/0/0 rx-desc-1 show vmxnet3 vmxnet3-0/13/0/0 rx-desc-1 1 show vmxnet3 vmxnet3-0/13/0/0 tx-desc show vmxnet3 vmxnet3-0/13/0/0 tx-desc 1 negative tests and command is rejected show vmxnet3 abc show vmxnet3 desc abc show vmxnet3 vmxnet3-0/13/0/0 abc show vmxnet3 vmxnet3-0/13/0/0 desc abc show vmxnet3 vmxnet3-0/13/0/0 rx-comp abc show vmxnet3 vmxnet3-0/13/0/0 rx-comp 1 abc Change-Id: I0ff233413496e58236f8fb4a94e493494c20c5cb Signed-off-by: Steven <sluong@cisco.com>
2018-10-16vmxnet3: vmxnet3_test_plugin.so: undefined symbol: format_vlib_pci_addr ↵Steven1-1/+9
[VPP-1456] When using vpp_api_test, there is an undefined symbol error for format_vlib_pci_addr when vmxnet3_test_plugin.so is loaded. The cause is due to vlib not included in vpp_api_test. Remove the reference for vlib.so in vmxnet3_test. Change-Id: I37c00dfe2f843d99ad6c4fc7af6ed10bac4c2df8 Signed-off-by: Steven <sluong@cisco.com> (cherry picked from commit 3d29e83112a349b7d27ef792463f246b18115d3e)
2018-10-16Sticky Load-balanceNeale Ranns6-40/+497
keep the number of buckets in the load-balanced fixed. If a path goes dwon fill its buckets with those from the next available up path. Change-Id: I15603ccb899fa9b77556b898c99136379cf32eae Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-10-15vnet: create L2 feature arc infrastructureAndrew Yourtchenko7-2/+728
This commit adds two new nodes in the L2 datapath in input and output direction respectively. These nodes fork the traffic into three feature arcs: ip4, ip6 and nonip, which later join to continue the usual L2 processing. The vnet_l2_feature_enable_disable() function with the same signature as vnet_feature_enable_disable() takes care of enabling the L2 datapath feature bits as needed, when the features are enabled/disabled. Thus, L2 features may use the similar plumbing as the L3 features enjoy. Change-Id: I76877b3a92d794c492bff1622bb26acba05705b2 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2018-10-15dpdk: drop no longer used config optionsStephen Hemminger1-6/+0
DPDK has switched to dynamic logging for initialization (since 18.05). Don't generate config for unused options. Change-Id: I3f1a5b3b8bee38abc9d0654737b59368646ed0fa Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
2018-10-15dpdk: only look at PCI information on PCI devicesStephen Hemminger5-8/+26
The rte_device is use as a base type of all DPDK devices. It is not valid to use container_of to find PCI information unless the bus of the rte_device is pci. Otherwise, the pointer is looking at some other data, which may or may not be zero. This change introduces a helper function to get rte_pci_device pointer. If device is on PCI bus it returns pointer to rte_pci_device info, otherwise it returns NULL. Change-Id: Ia7446006bb93a7a54844969f3b3dd3b918890dfd Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
2018-10-15VPP-1448: Fix error when recurse on down the trie.mu.duojiao2-21/+68
Change-Id: Idfed8243643780d3f52dfe6e6ec621c440daa6ae Signed-off-by: mu.duojiao <mu.duojiao@zte.com.cn>
2018-10-14vxlan:fix ip6 tunnel deletionEyal Bari1-1/+2
Change-Id: I70fb7394f85b26f7e632d74fc31ef83597efdd16 Signed-off-by: Eyal Bari <ebari@cisco.com>
2018-10-14acl-plugin: make each test in test_acl_plugin runnable separatelyAndrew Yourtchenko1-36/+75
And improve the robustness of the ethertype whitelist test coverage Change-Id: I64fe3a25208dbc619ae5cd6404f6122e69394a38 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2018-10-14session: mark apis for deprecationFlorin Coras1-2/+9
Change-Id: I913ffc963928b74cf4753b6b9a0eed4436887e04 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-10-14vcl: fix empty epoll returns (VPP-1453)Florin Coras1-0/+3
Change-Id: I0b191ddb749b1aa132c2d33b8359c146b36d27af Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-10-12session: don't wait indefinitely for apps to consume evts (VPP-1454)Florin Coras1-10/+28
Change-Id: I544b24d2b2c4a09829773cf180d1747f4b087d4c Signed-off-by: Florin Coras <fcoras@cisco.com>