Age | Commit message (Collapse) | Author | Files | Lines |
|
add the ability to override the default timeout value on a per-call
basis.
Use:
rv = self.vapi.papi.cli_inband(cmd='wait 10', _timeout=15)
Type: feature
Change-Id: Ia90a58586a1f63e02118599a2a4b7141e5a0b90d
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: fix
Fixes: efd7bc2b1c8db160933ed3e9ab3cde0d07aaf863
Change-Id: I254f9fe44189f88621b9b0ff3f869efb9966ada5
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: fix
Signed-off-by: Prashant Maheshwari <pmahesh2@cisco.com>
Change-Id: I81b937fc8cfec36f8fb5de711ffbb02f23f3664e
Signed-off-by: Prashant Maheshwari <pmahesh2@cisco.com>
|
|
Type: test
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I4ae1b56f273026aca86775fb61feabcdeb62c62e
|
|
If clib_time_verify_frequency() adjusts the clock frequency, transform
total_cpu_time to the new time coordinate space. Otherwise, we break
comparisons with previous clib_time_now() value.
Without this correction, time jumps in one direction or the other
depending on the sign of the frequency change. Reasonably harmless in
most cases, but under perfect storm conditions the wheels fall off.
Type: fix
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I21802c2630e2c87ff817cd732b7d78bc022cd2d7
|
|
Type: test
Change-Id: I34058f2bd20f61a8f8355299a8df95f2948c25eb
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: feature
Add a callback to the bond device class which allows a secondary
mac address to be added/deleted.
The desired operation is performed on all the hardware interfaces
which belong to the bond interface. This allows virtual MAC
addresses to be used on bond interfaces without requiring the
hardware interfaces to have promiscuous mode enabled.
When a hardware interface is added or removed from a bond, if there
are any secondary MAC addresses configured on the bond, they are
added or removed from the hardware interface.
Change-Id: If9488078b4d7869ecc56ef6853f3cc9891211860
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Type: fix
Change-Id: Ie441e81fe3971d70f96196c79d74658f910b4875
Signed-off-by: snaramre <snaramre@cisco.com>
|
|
Type: docs
Signed-off-by: Jerome Tollet <jtollet@cisco.com>
Change-Id: Ia2b892e550d391d421d9980d736768c918955cb6
|
|
Type: refactor
Change-Id: Ib36cc3f1173d093e9050f9fecda343df2aa3dc1f
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: fix
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I294f0b773375f6dce020b771db0726ceb5d812cc
|
|
Type: fix
Change-Id: I87503b9a981724b1f3ff1c45a4a5f7a43024ca76
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
When running exec scripts, there can be a need to wait between statements.
Type: feature
Change-Id: I2a45b390697e09fc222358c9354f28e3368a06ba
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: fix
Change-Id: I4286ba58bb15dd67c1199f76166bedf3b4e0344c
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
When a DHCP client is configured on a NAT outside interface with
output feature enabled, DHCP packets will reach the NAT in2out-output
node and will be dropped with "out of ports" reason.
With this commit, allow locally originated DHCP packets to be sent
from a NAT outside interface with output feature enabled.
Type: fix
Change-Id: I47d76b22587f2bf0c7b0b9dfda41c89f8f61d0b4
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
|
|
Introduce AddressSanitizer support: https://github.com/google/sanitizers/
This starts with heap instrumentation. vlib_buffer, bihash and stack
instrumentation should follow.
Type: feature
Change-Id: I7f20e235b2f79db72efd0e756f22c75f717a9884
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Reported by Vratko's review.
(Thanks for the review)
Fixes: 14b0b4791c0b8c886e7b5c9ca667d060f0bada0b
Type: fix
Change-Id: I9c080c0c40060cc77977e76edae03d60eb393ce2
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
if the adj source is not active then there is no existing cover
during a cover update
Type: fix
Ticket: VPP-1803
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: Ie912f1c99345de4fb012bdcd97b443098d4a7351
|
|
Type: fix
Fixes: 5a2e278a09726be627b8310e03f0522d60aafedf
Change-Id: Ibdc2f0be44e382bfa4a8f3e16be8d6239d7a0ec1
Signed-off-by: Jon Loeliger <jdl@netgate.com>
|
|
Type: refactor
Change-Id: I5ec7079d34826edd7a3048ae1d44037386f5d3ff
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: fix
This patch fixes crash issues(marked in brackets) in the below test cases
test flow enable index 0 1/1 -> [crash]
test flow disable index 0 1/1 -> [crash]
test flow add src-ip 192.168.8.8 proto udp redirect-to-queue 8
test flow enable index 0 1/1
test flow disable index 0 1/1 - [crash]
test flow add src-ip 192.168.8.8 proto udp redirect-to-queue 8
test flow enable index 0 1/1
test flow enable index 0 1/2
test flow del index 0 -> [crash]
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: I84bc6faa3d93a2cab4c82e8a876a8b1067257b62
|
|
This is a preparation step for migrating NAT to use SVR (shallow virtual
reassembly) to conserve space in vnet_buffer. Since max rewrite length
is currently pre-data size (128), u8 is sufficient to hold that value.
Type: refactor
Change-Id: I5374bb396e178245b870cb0bbf1370d2a54230bc
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Type: fix
harmless this time since it only affects the debug statement, but
it still crashes an ASAN image.
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: Ie02e7fe3014b98b9f8c83447f59017a380ab3948
|
|
Type: feature
Change-Id: I7e619040857310fffd33c355f6c491a55f7a4a02
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Ticket: FDIO-753
Type: fix
Change-Id: I4a8cf06970b658dfa15768459a3ff76571d6dfff
Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
|
|
Valgrind never really worked well with VPP. Remove the partial support.
Type: refactor
Change-Id: Ic09773fd85f904fdd2240bc161e23a4c2b196cf6
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: feature
In ethernet_input_inline(), when verifying that the destination
mac address on a received packet matches the mac address of the
interface where the packet was received, check the secondary
addresses on the interface if the primary address does not match.
This was done previously for eth_input_single_int().
Change-Id: I45716184dd789d83852271f9c79cedf5f6cbf75b
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Type: feature
from the API doc, a table replace is:
"
The use-case is that, for some unspecified reason, the control plane
has a very different set of entries it wants in the table than VPP
currently has. The CP would thus like to 'replace' VPP's current table
only by specifying what the new set of entries shall be, i.e. it is not
going to delete anything that already eixts.
the CP delcartes the start of this procedure with this begin_replace
API Call, and when it has populated all the entries it wants, it calls
the below end_replace API. From this point on it is of coursce free
to add and delete entries as usual.
The underlying mechanism by which VPP implements this replace is
purposefully left unspecified.
"
In the FIB, the algorithm is implemented using mark and sweep.
Algorithm goes:
1) replace_begin: this marks all the entries in that table as 'stale'
2) download all the entries that should be in this table
- this clears the stale flag on those entries
3) signal the table converged: ip_table_replace_end
- this removes all entries that are still stale
this procedure can be used when an agent first connects to VPP,
as an alternative to dump and diff state reconciliation.
Change-Id: I168edec10cf7670866076b129ebfe6149ea8222e
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
check the return result from fcntl, and if error, behave
the same way the expansion of _IOCTL macro does.
Type: fix
Change-Id: I6d537d1bdedae64470612aef64b46e07387fe84b
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Type: fix
Change-Id: I36558b67d38266def9dfe45777d9757a33ce2569
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: fix
Change-Id: Icc8cd05cb9c1844a9f8b0399797ad554f4ccf1a1
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: feature
Change-Id: Ib604cfdd55b72f0bc605d1d1e8b387e532b0a255
Signed-off-by: MathiasRaoul <mathias.raoul@gmail.com>
|
|
Trailing comma made last line of a multi-line command a new command.
Logs:
22:39:49,695 Return value: cli_inband_reply(_0=794, context=2, retval=0, reply='loop0\n')
22:39:49,695 CLI: packet-generator new {
name vlib
limit 15
size 128-128
interface loop0
node ethernet-input
data {
IP6: 00:d0:2d:5e:86:85 -> 00:0d:ea:d0:00:00
ICMP: db00::1 -> db00::2
incrementing 30
}
22:39:49,695 Calling cli_inband('cmd':'packet-generator new {\n name vlib\n limit 15\n size 128-128\n interface loop0\n node ethernet-input\n data {\n IP6: 00:d0:2d:5e:86:85 -> 00:0d:ea:d0:00:00\n ICMP: db00::1 -> db00::2\n incrementing 30\n }\n\n','context':3,'_vl_msg_id':792)
22:39:49,696 Return value: cli_inband_reply(_0=794, context=3, retval=0, reply='')
22:39:49,696 CLI: }
22:39:49,696 Calling cli_inband('cmd':'}\n\n','context':4,'_vl_msg_id':792)
22:39:49,697 Return value: cli_inband_reply(_0=794, context=4, retval=-1, reply="unknown inpu...
22:39:49,697 }
FAIL reply unknown input `}'
Type: fix
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
Change-Id: Iaa82d432677d742e766e42383364adda5bd87665
|
|
If an arc declaration includes '.last_in_arc = "some-node"', assume
that folks mean it and add explicit ordering constraints.
Fix the "arp" arc declaration which claimed that the arc ends at
arp-disabled, but the arc really ends at error-drop.
Type: fix
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: Ie2de1fb30091671cbc7c62770903a2e05987f141
|
|
Type: fix
Change-Id: I91063e2096fb09c34898a611184c8381fccdb333
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Type: style
Change-Id: Ib8febf8ea83f7ce1aeb93f227d00d3111fbef4ab
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: fix
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
Change-Id: I6b42bb9fb9d2e57f523022e321770bb1ff7415f3
|
|
Type: fix
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
Change-Id: Id47e3f2c348f07c84d9c2499122fa25d6c74fb13
|
|
File "/vpp/src/vpp-api/python/vpp_papi/vpp_serializer.py", line 512, in __init__
'Unknown message type {}'.format(f_type))
vpp_papi.vpp_serializer.VPPSerializerValueError: Unknown message type i16
Type: fix
Change-Id: Ibf73dc8df90153db586afe614e47be49739bac2f
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: feature
Change-Id: Id3cd89eca0deddb70f506239f9d0543fc28cf7f4
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: refactor
Change-Id: I1d90c8807e7eea4a77403bafc0628ec0d393c572
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: feature
* Remove the retry mechanism in case of failed connect
* Limit the number of simultaneous connects (default
to mqsize / 2)
Change-Id: I7a0ed2e349ee3e8ca71639c2a2ec4cdf84f5c13e
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: feature
Change-Id: Ia016fee107859d5ad22fe7959c8e9d32758e0787
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
We don't need the pool anymore as we store
the ctx index in the underlying UDP session opaque
Change-Id: Iec9be9c84a1f929d94b084176a143d304b0acb83
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: refactor
Use ipsecmb single GCM enc/dec API to furthuer improve single
buffer performance for small packets.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Change-Id: I2d34ff50d34b09f194fc0c88b6e9a3928a86fc33
|
|
set the address to MMAP_FAILED if mmap has failed,
so that we do not attempt to free it in the error
handling path.
Change-Id: I6e6b51a365fb68086dc20aa40a676a36af59a3ba
Type: fix
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Add PAPI support for VppTypeAlias decaying to BaseType.
E.g vl_api_interface_index_t sw_if_index [default=0xffffffff]
Type: feature
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I2061392157c9c11fbb0ff9e5406ea65489b017e9
|
|
This patch bumps the engine's intel-ipsec-mb version from 0.52 to
0.53, to avail performance improvement brought by the library.
Type: feature
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Change-Id: I939803015dece91ca59a7fe2120e2131d29e1c55
|
|
IPsec writes trailing data at the end of the buffer without checking
if there is enough space. If the packet length equals buffer size this
leads to rewiting of the next buffer header in the pool.
Type: fix
Change-Id: Iceb27bb724c7243863a4b532aad0808051b7d74c
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Type: fix
Change-Id: I5ad27b05c34494c5a2ea28706130612b547aaf67
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|