summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2018-05-28VPP-1284: Fix for TLS corruption on ARM platformsSachin Saxena1-2/+2
- The issue is appearing on ARM platofrms where DPDK drivers are also using __thread TLS vairables. - The issue was only appearing with dpdk as plgin to VPP and not if used as statically link with VPP. - Using traditional TLS scheme resolved the issue. Change-Id: Ifb4c667fdd217c2b1d79be8a541a2c983222d95a Signed-off-by: Sachin Saxena <sachin.saxena@nxp.com>
2018-05-28dpdk: set dmamap iova address value according to eal_iova_modeSachin Saxena1-1/+4
- Fix the issue where eal iova mode is Virtual Address (RTE_IOVA_VA) but setting DMA iova address to Physical address value always. Change-Id: Ib1e9c1596d95885c7eff11723338121627203e61 Signed-off-by: Sachin Saxena <sachin.saxena@nxp.com>
2018-05-28af-packet: Add support for loggingMohsin Kazmi3-38/+52
Change-Id: I4cc6a20b69cce2aa52768a27c5d455eb098224c8 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2018-05-28itf: Fix admin up down for AF_PACKET and vhost-userMohsin Kazmi3-12/+50
Change-Id: I84327197d59c72d0d046dd2cb4071bf74af6fc28 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2018-05-28Fix IP neighbor/arp pool full and static entry handlingJohn Lo2-166/+169
Move handling of IP neighbor pool full into main thread on entry creation and make sure static entriesare not deleted for reuse. Fix IPv6 neighbor handling on interface down and up so that static entries are not deleted. Change-Id: I073794949a41a5b86201e519ebe479febfc506c8 Signed-off-by: John Lo <loj@cisco.com>
2018-05-27proxy_arp: remove unused is_addMarek Gradzki1-2/+1
Change-Id: I1773d962b373693a737d39c0c97e8c53eb91545a Signed-off-by: Marek Gradzki <mgradzki@cisco.com>
2018-05-27ip4-input node reworkDamjan Marion3-125/+339
Gain is around 6 clocks per packet (22 to 16). Change-Id: Ia6f4293ea9062368a9a6b235c650591dbc0707d0 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-05-27Fixes make test errors with clang compiler on aarch64Sirshak Das1-3/+3
(VAPI_*BIN).d targets didnt have fake.api.vapi.h* as dependencies this causes the compilation to proceed before the python script generates the header files. Explicit linking of stdc++ is required for clang as errors like undefined reference to 'new operator' pop up. Change-Id: I3ca0ef048f392c4a032160ce0e4f7ae759f4c79d Signed-off-by: Sirshak Das <sirshak.das@arm.com> Reviewed-by: Brian Brooks <brian.brooks@arm.com> Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
2018-05-27bond-input performance optimizationDamjan Marion2-291/+264
Old code ~25 clocks/packet, new ~10. Change-Id: I202cd6cbafb1ab2296939634d674f7ffd28253fc Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-05-27acl-plugin: use clib_bihash_search_inline_2_40_8 rather than ↵Andrew Yourtchenko2-5/+3
clib_bihash_search_40_8 for session lookups Use inline version rather than calling the function, this gives slightly better performance. The straighforward diff uncovered an interesting problem: the stateful ACL IPv4 unit tests would fail for the "make test" but succeed in "make test-debug". Also, they would succeed even in "make test", if before calling the clib_bihash_search_inline_2_40_8 we would change the code to store the key in a temporary variable. Debugging revealed that the generated optimized code is not what one would expect: the zeroing of the u64s overlaying the memcpy into ipv4 value of ip46_address_t made the optimizer not notice the latter, and think that those fields should be always zero in the bihash, thus generating incorrect assembly for the bihash key comparison for the ipv4 nodes. Changing the zeroing to be non-overlapping by zeroing only the pad fields resulted in the optimizer generating the correct code and the tests pass. Change-Id: Ib0f55cef2b5fe70c931d17ca4dc32a5755d160cd Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2018-05-27VPP-1294: add missing feature arc constraintDave Barach6-52/+116
the ip4-dhcp-client-detect feature MUST run prior to nat44-out2in, or inbound dhcp broadcast packets will be dropped. Certain dhcp servers answer lease renewal dhcp-request packets with broadcast dhcp-acks, leading to unrecoverable lease loss. In detail, this constraint: VNET_FEATURE_INIT (ip4_snat_out2in, static) = { .arc_name = "ip4-unicast", .node_name = "nat44-out2in", .runs_after = VNET_FEATURES ("acl-plugin-in-ip4-fa"), }; doesn't get the job done: ip4-unicast: [17] nat44-out2in [23] ip4-dhcp-client-detect [26] ip4-not-enabled Add a proper constraint: VNET_FEATURE_INIT (ip4_snat_out2in, static) = { .arc_name = "ip4-unicast", .node_name = "nat44-out2in", .runs_after = VNET_FEATURES ("acl-plugin-in-ip4-fa", "ip4-dhcp-client-detect"), }; and the interface feature order is OK, at least in this regard: ip4-unicast: [17] ip4-dhcp-client-detect [18] nat44-out2in [26] ip4-not-enabled We need to carefully audit (especially) the ip4-unicast feature arc, which has [gasp] 37 features on it! Change-Id: I5e749ead7ab2a25d80839a331de6261e112977ad Signed-off-by: Dave Barach <dave@barachs.net>
2018-05-26Fix interface-rx-dpo-l2 node to setup l2_len in vnet bufferJohn Lo1-4/+16
Change-Id: Ic1fab1f3aba92bbdbfd281459562d1f9697ab465 Signed-off-by: John Lo <loj@cisco.com>
2018-05-26dpdk: enable RX for no-multi-segZhiyong Yang1-0/+5
The option no-multi-seg doesn't take effect for RX since MTU which is too large is passed to DPDK lib, Which causes PMDs are running XXX_scattered_rx function. The patch fixes the issue. Change-Id: I91a6fb23fd118e872c8a52a6c35c36a86cb2c02b Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
2018-05-26tcp: loss recovery improvements/fixesFlorin Coras8-146/+248
- fix newreno cwnd computation - reset snd_una_max on entering recovery - accept acks beyond snd_nxt but less than snd_congestion when in recovery - avoid entering fast recovery multiple times when using sacks - avoid as much as possible sending small segments when doing fast retransmit - more event logging Change-Id: I19dd151d7704e39d4eae06de3a26f5e124875366 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-05-26acl-plugin: create forward and return sessions in lieu of making a special ↵Andrew Yourtchenko5-121/+156
per-packet session key Using a separate session key has proven to be tricky for the following reasons: - it's a lot of storage to have what looks to be nearly identical to 5tuple, just maybe with some fields swapped - shuffling the fields from 5tuple adds to memory pressure - the fact that the fields do not coincide with the packet memory means for any staged processing we need to use up a lot of memory Thus, just add two entries into the bihash table pointing to the same session entry, so we could match the packets from either direction. With this we have the key layout of L3 info (which takes up the majority of space for IPv6 case) the same as in the packet, thus, opening up the possibility for other optimizations. Not having to create and store a separate session key should also give us a small performance win in itself. Also, add the routine to show the session bihash in a better way than a bunch of numbers. Alas, the memory usage in the bihash obviously doubles. Change-Id: I8fd2ed4714ad7fc447c4fa224d209bc0b736b371 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2018-05-25Add interface rx pcap tracingDave Barach5-81/+167
Should cost at most 1 clock per frame when not enabled. Add "pcap rx trace..." debug CLI, refactored "pcap tx trace" debug CLI to avoid duplicating code. Change-Id: I19ac75d1cf94a6a24c98facbf0753381d37963ea Signed-off-by: Dave Barach <dbarach@cisco.com>
2018-05-25Fix possible null pointer dereferenceJuraj Sloboda1-3/+14
Replace clib_warning with vlib_log_warn Change-Id: I6d0b8d97048b75f4418609264af0c14e19fad79b Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
2018-05-25tcp: handle acks in close waitFlorin Coras2-1/+2
Thanks to Ning Li <muziding001@163.com> for reporting. Change-Id: I758bc6760ec5a9ec688172bc162a1873f96ab4f3 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-05-25memif: Add support for loggingJakub Grajciar3-56/+90
Change-Id: I0fe60a639c7589dc842d85db092c81c1a7441cb7 Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2018-05-25bond: performance harvestingSteven10-172/+266
- hash is great. But it is a bit too slow for the DP. Use direct array indexing to quickly retrieve the slave interface. - the algorithm used by flow hash is great. But it is a bit too slow for the DP. Use l2_hash_hash() extracted from lb_hash.h which ECMP is using. It makes use of intrinsic crc32 instruction set. - shortcut modulo arithmetic when the operand is 2**x (where x up to 4) to avoid division instruction. - special case for link count == 1 in bond_tx_fn() - use clib_mem_unaligned to access data for the packet to avoid alignment error - Fix some typos for packet tracing. Change-Id: I8eae3ad497061c5473aa675ba894ee0211120d25 Signed-off-by: Steven <sluong@cisco.com>
2018-05-25ARP proxy dumpsNeale Ranns23-75/+454
Change-Id: I8335ebf266becf2f42bb3f28a17dfed8d9b08f97 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-05-25Fix VPP DPDK build failure with Mellanox NIC on aarch64Bin Huang1-1/+2
This compile issue was first reported by Sirshak Das in following thread: https://lists.fd.io/g/vpp-dev/message/8384 The issue was caused by auto-config shell script auto-config-h.sh regard quotation mark "" as $CROSS prefix for $CC when CROSS is empty. Change-Id: Ied535c6d18c4dffacbddabc3ad2087dffe19438d Signed-off-by: Bin Huang <huangbin.mails@gmail.com>
2018-05-25Vectorized bihash_{48,40,24,16}_8 key compareDamjan Marion6-24/+83
bihash_48_8 case: Scalar code: 6 clocks SSE4.2 code: 3 clocks AVX2 code: 2.27 clocks AVX512 code: 1.5 clocks Change-Id: I40700175835a1e7321276e47eadbf9771d3c5a68 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-05-25VPP-1277: IPIP - Copy TOS/TC from inner packet to outer.Ole Troan7-36/+131
Add support for either copying TOS/TC from inner packet to outer, or set to fixed value. Change-Id: I716a95f875349acec94317b266c8cf9f2f81a785 Signed-off-by: Ole Troan <ot@cisco.com>
2018-05-24VPP-1286: close the fd after mmap-ing svm segmentsDave Barach1-0/+2
Broken for years. Duh. Change-Id: Ie5fb8e802f143aacd3301c45b136b24a8d4f6d74 Signed-off-by: Dave Barach <dave@barachs.net>
2018-05-24Rewrite of l2-output nodeDamjan Marion2-332/+311
Change-Id: I8cbd1eac80ae4aeb173d02786e9ccf3b4877304d Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-05-23make test: VPP-1288 fix from sw_if_index valuesKlement Sekera2-9/+6
Change-Id: I80297e78d93d8cf0d347863e4d2fdb12ea9294ac Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-05-23VPP-1283: IPv6 PMTU missing MTU value in ICMP6 message.Ole Troan4-25/+43
Fix GRE/IPv6 setting of ip->payload_length (which has never worked). Change-Id: Ie68f1cc7bbb70489d6ec97356132c783f2345e1e Signed-off-by: Ole Troan <ot@cisco.com>
2018-05-23VPP-1283: IPv4 PMTU missing MTU value in ICMP4 message.Ole Troan5-34/+257
Change-Id: I7a4133c59ff45b0744b48e246a049d9f015026fc Signed-off-by: Ole Troan <ot@cisco.com>
2018-05-23VPPAPIGEN: Add union and enum support and IP4/IP6 address type.Ole Troan4-85/+160
Note: The Python, Java and C/C++ bindings must be updated before ip/ip_types.api can be used. ip_types.api: typedef ip4_address { u8 address[4]; }; typedef ip6_address { u8 address[16]; }; enum address_family { ADDRESS_IP4 = 0, ADDRESS_IP6, }; union address_union { vl_api_ip4_address_t ip4; vl_api_ip6_address_t ip6; }; typedef address { vl_api_address_family_t af; vl_api_address_union_t un; }; Change-Id: I22f67092f24db5bd650a03c6f446a84cd9fd1074 Signed-off-by: Ole Troan <ot@cisco.com>
2018-05-23dpdk:flow add vxlan flow supportEyal Bari1-12/+77
Change-Id: Ic9f98c022e32715af395c9ed618589434eb0e526 Signed-off-by: Eyal Bari <ebari@cisco.com>
2018-05-23tcp: cc improvements and fixesFlorin Coras5-26/+38
Change-Id: I6615bb612bcc3f795b5f822ea55209bb30ef35b5 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-05-22avf plugin: add support for loggingJakub Grajciar2-5/+14
Change-Id: Ic8c5b527395fc99f1e1a72e51f8d41c9b4f415df Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2018-05-22acl-plugin: refactor to introduce multiarch dataplane functionsAndrew Yourtchenko6-1615/+2036
This commit splits the functions from fa_node.c into the pure dataplane node functions (which are multiarch-compiled), session management node functions (which are compiled only once), and session find/add/delete functions which are split out into the inlines. As part of the refactoring: - get rid of BV() macros in the affected chunk of code, rather use the explicit bihash function names. - add the magic trailer to the new files to ensure make checkstyle watches them. - move the bihash_template.c include for 40_8 bihash into acl.c Change-Id: I4d781e9ec4307ea84e92af93c09470ea2bd0c375 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2018-05-22vppinfra: add clib_count_equal_uXX and clib_memset_uXX functionsDamjan Marion4-5/+339
Change-Id: I56782652d8ef10304900cc293cfc0502689d800e Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-05-22CSIT-928 dpdk/ipsec: performance improvementRadu Nicolau4-119/+119
Replace hash with a vector to improve performance. Plus other minor performance improvements. Change-Id: I3f0ebd909782ce3727f6360ce5ff5ddd131f8574 Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
2018-05-21tcp: unlock link-local adjacencies on connection cleanupFlorin Coras2-24/+56
Change-Id: I37705fb572045f42be4c2dabbd8460c8f8872167 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-05-21dpdk:enable flow director perfect modeEyal Bari3-4/+25
when flows are enabled on the device Change-Id: I971764988d5a9e7078468f627205b3fa60736263 Signed-off-by: Eyal Bari <ebari@cisco.com>
2018-05-20vector functions cleanup and improvementsDamjan Marion8-96/+99
Remove functions which have native C equivalent (i.e. _is_equal can be replaced with ==, _add with +) Add SSE4.2, AVX-512 implementations of splat, load_unaligned, store_unaligned, is_all_zero, is_equal, is_all_equal Change-Id: Ie80b0e482e7a76248ad79399c2576468532354cd Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-05-19MLX DPDK glue: exclude dependency on OFED librariesIgor Mikhailov (imichail)1-0/+1
MLX DPDK mlx5_glue.so, compiled under RTE_LIBRTE_MLX5_DLOPEN_DEPS, provides a run-time check for OFED libraries. To do so, it links with -libverbs -lmlx5 so that the binding could occur or fail at runtime (see DPDK 59b91be and VPP 59b91be). However RPM install fails on systems without OFED installed since RPM spec has an entry "Requires: libmlx5". To overcome this, exclude such requirement from the spec. Same applies to mlx4_glue.so, compiled under RTE_LIBRTE_MLX4_DLOPEN_DEPS Change-Id: I0ff6efc49581104743cc7e5b1f7cdbc1665ce9ba Signed-off-by: Igor Mikhailov (imichail) <imichail@cisco.com>
2018-05-19log: Validate the size of vec in vlib_logMohsin Kazmi1-0/+1
Change-Id: I6d1218c17ee055275596b9a49767f15994aa1b2b Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2018-05-19Disable vector code in vlib_buffer_enqueue_to_next if no msb mask functionDamjan Marion2-1/+3
This fixes ARM64 build where we dont have defined u16x8_msb_mask(...) Change-Id: I864f5134a0d951601810c800f587d173b3b7ef41 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-05-19tcp_echo: support multiple connectionsFlorin Coras1-218/+250
Change-Id: I6d8e1351e088728f7363550a0fc117256cae2841 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-05-18IP unnumbered dumpNeale Ranns6-3/+173
Change-Id: I4f245fd225bcc563fafee2696cd039477d661c57 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-05-18Add vlib_buffer_enqueue_to_next inline functionDamjan Marion5-76/+140
Change-Id: I1042c0fe179b57a00ce99c8d62cb1bdbe24d9184 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-05-18IP table bind allowed only if table existsNeale Ranns3-31/+15
Change-Id: If01400e3434b25b2da36ba28ceb8444b216d0e38 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-05-18ARP: Ensure STATIC and DYANMIC ARP flags are mutually exclusive.Jon Loeliger1-3/+9
Change-Id: I44278dea2ee1daa147b0928bfe26e861907a209f Signed-off-by: Jon Loeliger <jdl@netgate.com>
2018-05-18IP address dump - don't send subnets for unnumbered interfacesNeale Ranns1-4/+6
Change-Id: I8c64a0d2f757d96ffa7fd042c23b0d814217c215 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-05-1818.01.2 Release NotesDave Wallace1-0/+10
Change-Id: I17ba98b48409d907081a0fd8d7db35adf45192ef Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2018-05-18session: add session process nodeFlorin Coras6-1/+88
Add a session process node that handles main thread tx and retransmit in order to avoid having a polling input node. Change-Id: I3357e987c023a84b533b32793e37ab4204420f64 Signed-off-by: Florin Coras <fcoras@cisco.com>