Age | Commit message (Collapse) | Author | Files | Lines |
|
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: Id13da9371c71c10c12a0120ec89ba21c1ca47524
|
|
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I8af6ee6e5239f0836978baa063a18a01c610279f
|
|
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I3cf5295f1a85579a66ba38ca1f74678b45474959
|
|
Type: fix
Change-Id: I10ebcc653491d11ca798e0a60be6eeef82c41766
Signed-off-by: Mathias Raoul <mathias.raoul@gmail.com>
|
|
Some testclasses (e.g. IPSec) have methods with the same names,
this causes a race when running in parallel to save the API and
move it into the test's directory - the name of the file has
only the test method name as a discriminator.
Saving two traces from two VPP instances "succeeds", in that
it silently overwrites the file. But only one mv operation
works - the other gives an error "file not found" and fails the test.
Solution: add the PID of VPP under test to the API dump filename,
this way the filenames become guaranteed unique and the race is avoided.
Change-Id: I1bb47ed73369fea0f1bfbf907588a51e2cabfb7f
Type: test
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I990d8d521c128e8d4f482e30b3a49cbc11b632d1
|
|
Type: feature
Change-Id: I888d415ff645b3827df7d4cfb0d3c5f4ac940617
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: feature
Change-Id: I40169fbbe8a20670dd612c341b6c78b5c925bf74
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: Ie136c1e94e5c25f9547fc2d6d45ce8e1630a035c
|
|
When VPP work with dpdk-plugin, linux_vfio_main_t->container_fd is always -1
since it never have chance to run open("/dev/vfio/vfio") to get the fd.
But this lead to a potential issue of VPP, that is, when start VPP without
uio-driver field setup in /etc/vpp/startup.conf, VPP will run to automatical
select uio driver in vlib_pci_bind_to_uio() and the function depend on
iommu_group value to decide to work on vfio or vfio-noiommu mode.
Since in vlib_pci_get_device_info() have the condition container_fd != -1,
so the iommu_group value will be always -1 at this scenario, this caused
that VPP mistake to run with vfio-noiommu driver on intel_iommu=on state.
Actually in order to get iommu_group and iommu_group/name value, no need to
depend on linux_vfio_main_t->container_fd value, so the fix remove the
condition lvm->container_fd != -1, then it can get the correct iommu_group
value.
Type: fix
Change-Id: I3f162fc4971b9a2b8717205f8f3b52e30c5e5b69
Signed-off-by: Yulong Pei <yulong.pei@intel.com>
|
|
Needed a bit of foreach_vlib_main(...) action to turn on/off all
instances of vm->dispatch_pcap_enable, and to pick up the pcap_main_t
pointer from vlib_global_main.
Type: fix
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I49b69b87934c7dc7a9835cd07aa2c5c4d3c79f18
|
|
Type: fix
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I9576ade941b10d1605f6c6714f312ae2a8ad5065
|
|
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: Ib918d11fb3278a25a92006dcfe3c7c484e7b33ea
|
|
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: Icbe9ca3dc738c6575fe382740a1cc9d29a4a74ff
|
|
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I166019cc69fd01cb43f1a3fad699f3d2e5ec5b19
|
|
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: Ie23c9d2d7325be62ef33df2f0562ab41518f7bf4
|
|
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: Iea19d7bc2dfe9736ddefb4419509ccfda7a67eeb
|
|
Committed from SK936 seat 1A.
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I717fafbdb9b8576508d6dd72a7e5653cecebfae0
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Type: style
Change-Id: I620f15b96ee5401e0145a139f06d343d7c4fadb4
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I3255702e7c562c8d04a91a095e245756c6443a9e
|
|
Type: fix
Change-Id: Ia9f74f951f831cc5c9b5af863db1bb3f7a1a81ff
Signed-off-by: snaramre <snaramre@cisco.com>
|
|
Type: refactor
Use pending tx buffer vector to postpone dispatching of all buffers,
i.e., either generated as a result of tx events or custom tx event.
Change-Id: Ic5894c4653c338cfb04555d20857f954b245ee83
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Makes it easy to tell GETs from POSTs, etc., in case one wants to
register the same handler for multiple request types.
Return interface stats as a json array, makes .js code a lot simpler.
Type: refactor
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: Iadae7b909cf3e8ea179fe93620737fdf68f888ac
|
|
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I7c4a12165fa0928fb2b8d99fc1c8d5de16377e7e
|
|
Type: feature
Add infra that allows transpors to enqueue pending buffers without the
need to build and manage their own pending frames. An important benefit
is the fact that buffer wire/tx ordering is ensured by session layer.
Change-Id: I764fd1693d610b321a1d0c84b648a314f14583db
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: fix
Change-Id: I0d9b823bd558c48b18af9b0d1e80c30729e64dac
Signed-off-by: snaramre <snaramre@cisco.com>
|
|
Type: fix
Change-Id: I02e2cb2d349f9ddb2bfed040a08ca448f379d565
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: fix
Change-Id: Id9a328158e7c4106a95928bf8ddceb7b9e73aa25
Signed-off-by: snaramre <snaramre@cisco.com>
|
|
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: Ie15ea8f01846f87cb65e90e8762dc941441fc176
|
|
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: Id1794f38fcb776ded9b769141f5f47d7be75f247
|
|
Set high ssthresh out of the box and make configurable
Type: fix
Signed-off-by: Sergey Ivanushkin <sergey.ivanushkin@enea.com>
Change-Id: Iba1549b4ee55e51468ad0b28ef3d26a85fa9cae0
|
|
Useful to force content reloads
Type: feature
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: Ieecb018bec61a1624574660842d7d92cd84520f9
|
|
Use consistent API types.
Type: fix
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Change-Id: I7048f8ec598a8b06d75bdfb5d2fab9f6337c9474
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
Use consistent API types.
Type: fix
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Change-Id: I1cc42b57fbf72e2ced8b5d1283c34de2f7ff948a
|
|
.. otherwise i'm going to commit it accidentally
Type: feature
Change-Id: I0378b9a29a28ea7317bc7d234f8cbacdafd6b762
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Copy sw_if_index value instead of using pointers to original
bif->slaves content which could be overriden by eg. vec_del1().
Type: feature
Change-Id: I37e458effd6b2367479574f7bd3facd4e93bada4
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
Change-Id: Ib03151a097caf15e4e8285afea83d1b930a874b0
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: fix
Connect ctrl message recently outgrew the maximum ctrl msg size, so
increase the limit. Also add static asserts for messages that could
potentially exceed the limit.
Change-Id: I0d3e32e0d4d67d7e222cff14ddba59a0c3fb8b00
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: fix
Change-Id: I6164ad0d97cd91b60c85302eff691836d12a0a70
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
In bond RX quad loop, when all packets within the frame have the same incoming
interface, we cannot skip calling bond_update_next because that function calls
vnet_feature_next() to update the b->current_config_index. The next node needs
the correct b->current_config_index to work with.
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I3d8b3d4e0f95490f406fae7638f0c43c301ce664
|
|
Type: fix
Change-Id: I31e5d9d9e93339eb789aed20996f326b085c22a9
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: feature
Add a callback to install or remove an additional MAC address on
a DPDK-managed device. Note that some PMDs don't have support for
this so YMMV.
Change-Id: I7b0cb3fb0af0d66fbdb7b894a712897f889520a5
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Type: feature
Change-Id: I590612989cb3c114f8d99227ad36c3434e998597
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: feature
Add 'drop' and 'redirect-to-queue' support in
'test-flow' command and DPDK plugin
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: I567bb77cb401c9bd1309ecabe802fe9de88c746b
|
|
Type: fix
Change-Id: Ie7764fec13cbb83b6899c7c33b7b2f8cc5d40c8a
Signed-off-by: snaramre <snaramre@cisco.com>
|
|
Type: fix
- when the fifo is wrapped, and if applicable, insert a new chunk after
the tail-chunk and rebuild the rb_tree.
- make sure that this new algorithm can be applied only when the fifo is
used by a single thread (master-thread of the fifo).
Signed-off-by: Ryujiro Shibuya <ryujiro.shibuya@owmobility.com>
Change-Id: I3fc187bc496ea537ca24381e4abc08d2906c9e03
|
|
Reseting vector length confuses ASAN and does not reset data either.
Only reset data instead.
Type: fix
Change-Id: Id60b8333df28a5b636a9d302b987bbad95c85c38
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
Change-Id: I82308e368d14d84f5970dad229bdcf2de7d1839d
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
Change-Id: Ie63b80db56febc8a16bafcdd5399b2f92b6aa437
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Python3 fixes.
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I648b2142d45dfab9146a02eeb1b12de11103ff9f
Signed-off-by: Ole Troan <ot@cisco.com>
|