Age | Commit message (Collapse) | Author | Files | Lines |
|
Type: fix
Ticket: VPP-1883
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: Icf50a645e114fa3b7bd974f8c82f5ceebfcedcd7
|
|
Type: improvement
Bond link state is being maintained inconsistently. It is initially set to
up. If the bond interface admin state is set to down, the link state is
set to down. If the bond interface admin state is set to up, the link
state is only set to up if there are active slave interfaces at that point.
If slaves become active at some later time, it does not get updated. Its
next chance to be updated is the next time the bond interface is set to
admin up.
To address this, do not set the link state to up after creating a bond.
Adjust the link state as slave interfaces are attached or detached
based on whether the bond is getting its first active slave or losing
its last one.
Unit test added to verify correct maintenance of link state.
Change-Id: I31f17321f7f0e727e1ab1e01713423af6566dad9
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Change in snat_ipfix_header_create() to use thread-specific
vlib_main_t *vm pointer to avoid problems with different threads
accessing the same vlib_main_t data structure. This avoids
assertion failure when vlib_time_now() is called with a vm
corresponding to a different thread.
Type: fix
Signed-off-by: Elias Rudberg <elias.rudberg@bahnhof.net>
Change-Id: I2096c1debb5688d3b97e5ed9a0ea78d94053d8b7
|
|
Add a new boolean to signal that the API infrastructure should performan any required
endian conversions for the API handler.
am->is_autoendian[mm->msg_id_base + VL_API_MAP_ADD_DOMAIN] = 1;
Similarly add new REPLY_ macros that perform endian conversion.
These changes do not change the on-the-wire encoding of the API messages, and therefore the API CRC is not changed.
Type: feature
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I7588f8ccb38b2d1e8d85ea17be99bac43f756267
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I342d8f928fcc7de74f9bd288c1a5d63ea1f90020
|
|
Type: fix
when the interpose is on an adj-fib and the cover is removed the adj
source will not install. this lead to no path list being found for the
interpose source and a crash. pick a drop path list in this case.
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: Ied217da043926c913657080f5ffb151201225d23
|
|
Type: improvement
a bihash per-interface used too much memory.
Change-Id: I447bb66c0907e1632fa5d886a3600e518663c39e
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I1e9652b476bbc07852b4e701a948c36a0d8c67fa
|
|
Type: improvement
Change-Id: Ic49a43651b80b79fa278e29964da5cb2ead2a818
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
Signed-off-by: Rajesh Goel <rajegoel@cisco.com>
Change-Id: I8d128598b4c872f19b64c779c19b5908ba2f2c08
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I83dafe10cdc78fbb9a751f32155cd84d281b12d9
|
|
This fixes an issue where the pinned requirements file can be modified
when running the tests.
Change-Id: Ic89d1844d1fd8d00f62211a9b051a26ac34ee316
Type: fix
Signed-off-by: Aloys Augustin <aloaugus@cisco.com>
|
|
Type: fix
Fixes: 487507f
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ia9813ae09d14111dc8edac0fa6ab082e13ab6e2e
|
|
Instead of having to wrap dump/detail calls in control ping, send details messages in between a normal
reply / request pair. As expressed in the below service statement.
Example:
service {
rpc map_domains_gets returns map_domains_get_reply
stream map_domain_details;
};
define map_domains_get
{
u32 client_index;
u32 context;
u32 cursor;
};
define map_domains_get_reply
{
u32 context;
i32 retval;
u32 cursor;
};
To avoid blocking the main thread for too long, the replies are now sent in client message queue size
chunks. The reply message returns VNET_API_ERROR_EAGAIN when there is more to read.
The API handler must also include a "cursor" that is used to the next call to the get function.
API handler example:
REPLY_AND_DETAILS_MACRO (VL_API_MAP_DOMAINS_GET_REPLY, mm->domains,
({
send_domain_details (cursor, rp, mp->context);
}));
The macro starts from cursor and iterates through the pool
until vl_api_process_may_suspend() returns true or the iteration
reaches the end of the list.
Client Example:
cursor = 0
d = []
while True:
rv, details = map_domains_get(cursor=cursor)
d += details
if rv.retval == 0 or rv.retval != -165:
break
cursor = rv.cursor
or the convenience iterator:
for x in vpp.details_iter(vpp.api.map_domains_get):
pass
or
list(details_iter(map_domains_get))
Change-Id: Iad9f6b41b0ef886adb584c97708dd91cf552749e
Type: feature
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Type: improvement
Change-Id: I51cbe5c76a88d7fa65fa24dc1528e4f991eba534
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
|
|
Obserbed when VPP is running in k8s container.
Type: fix
Change-Id: Ibbff9c3921bd7f4f97d47cb6f10eed8ed5efe269
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: If61eec3f5723e6b36e6f4a21c05d8d0dd3547fc7
|
|
Reported as part of "show tcp stats"
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I499ab4e41d13aaf1a0d060e37f09087e63d09567
|
|
In case there is no free space in first buffer for ICV and footer,
additional buffer will be added, but esp_encrypt will stay in single
buffer mode.
The issue happens for the following payload sizes:
- TCP packets with payload 1992
- ICMP packets with payload 2004
This fix moves the single/chained buffer ops selection to after
esp_add_footer_and_icv call.
Type: fix
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Signed-off-by: PiotrX Kleski <piotrx.kleski@intel.com>
Change-Id: Ic5ceba418f738933f96edb3e489ca2d149033b79
|
|
Type: refactor
Change-Id: Iea83e0ea8a6e13f3c9ece1a13f891c1fa0956711
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
Change-Id: I5c944c3f82e0f278b64f28e09a74f24514c029f0
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Support VIRTCHNL_VF_CAP_ADV_LINK_SPEED.
Type: improvement
Change-Id: Ie45c9d557d0369464cbb6881ee1259ef3807d7d5
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Fix allocation of port per dslite session.
After each session is created per protocol,
when new one should be created with new port,
instead it's trying to create with the same port
and while(1) loop is executed forever and VPP does
not response
Type: fix
Signed-off-by: Vladimir Ratnikov <vratnikov@netgate.com>
Change-Id: Ic91b8b07253498ef9846ca60bcd4c4c76a5fac91
|
|
Type: fix
Change-Id: I7cb7e3716aee865b12235865009e39ed6ad16680
Signed-off-by: Filip Varga <fivarga@cisco.com>
|
|
Type: improvement
Change-Id: I33cd702f9c4d995520509fdb16e3b8f8fd50e535
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Request connected udp listener behavior by setting
VPPCOM_ATTR_SET_CONNECTED attribute with vppcom_session_attr
Type: feature
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Iba95155c0f41cea8c6e1a4263946270d49c213ac
|
|
Type: fix
Change-Id: Idf7c80b7d81f796bd0512bca4276bcfcf2af241a
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Instead of allocating stack from the main heap, this patch mmaps stack
memory together with guard page.
This aproach reduces main heap usage, and stack memory is prefaulted
on demand, so bigger process stacks will have zero impact on memory
usage as long as stack memory is not needed for real.
In addition, it fixes issue with systems which have bigger default page
size (observed with 65536).
Type: improvement
Change-Id: I593365c603d4702e428967d80fd425fdee2c4a21
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: docs
Change-Id: I45265876c9c778f6b91d39f30eb6035f14d166ec
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Now, libc epfd and vls epfd are independent and can only epoll_wait independently without timeout, then app calling epoll_wait will occupy high CPU. So we nest vcl_mq_epfd into libc epfd when using eventfd with VPP, and then we can only epoll_wait libc epfd with specified timeout.
Type: feature
Signed-off-by: hanlin <hanlin_wang@163.com>
Change-Id: I6b6e0f501c769e186714bfbc187cfaed2533b4c2
Signed-off-by: hanlin <hanlin_wang@163.com>
|
|
Document update to reflect merged SRv6 functions of lookup and forwarding for inner IP packet encapsulated with outer IP and GTP-U headers.
Type: docs
Signed-off-by: Satoru Matsushima <satoru.matsushima@gmail.com>
Change-Id: I85c9ddf6bf9fa63f2b8b6e03eff3ecec1e7615ab
|
|
vppinfra source files MUST NOT #include <vlib/vlib.h>, <vnet/vnet.h>
or similar. Move mpcap_add_packet(...), mpcap_add_buffer(...) to a new
file: src/vnet/mpcap.h.
Type: refactor
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: Id517aef6fe49b618f853ce32940b91ba45a1e60d
|
|
Netvsc devices have the port type determined from their link speed.
The link speed between reboots of an Azure VM does not always end
up at the same value, so an interface that was FortyGigabitEthernet0
earlier may be FiftyGigabitEthernet0 now. That makes it difficult
to maintain a persistent store of configurations and apply those at
startup.
Change the port type to be VF so the name will always be generated
as VirtualFunctionEthernetX.
Type: improvement
Change-Id: I58cab852b87c0bcd9f73afe239803f38dab5c159
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Type: fix
Change-Id: I7349840af48eec209532dab43a8ad0bd68993268
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I1b3ae8b348eb3cba628a55ea3e72e85b9a4288d5
|
|
Swap byte order for fields of type vl_api_rx_mode_t.
Ticket: VPP-1871
Type: fix
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Change-Id: Ia1745257b57209d41661d38067e0dd7618f9a9b9
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
(cherry picked from commit aefcd1a3579ec2c93f606b151d563d87ea211387)
|
|
Type: improvement
Change-Id: Iea8e08dc18b72334f69af77c2753e900be6b97fb
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
cleaned up typos in documetation while doing a read through.
Type: style
Change-Id: Id8abbd8d6297ee10490c12a8e62097224f7ec1e1
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: fix
Signed-off-by: Ignas Bacius <ignas@noia.network>
Change-Id: Id99a15272f6f12a724a4cfd9de461f1aa6a6a634
|
|
Type: improvement
Change-Id: I438206513b3cc3dedc0241b43c4ce037afa83e2b
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
The recent introduction of f-strings require >=Python3.6
Fix a couple of pycodestyle warnings.
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: Id9e375bb8febb157d7f9d7fa21808724770df6f8
|
|
Cleanup L2/L3 mode switch to not redirect to/from ethernet-input node
as it is no longer necessary.
L2 patch should use sw_if_index for device feature enable/disable.
Type: fix
Signed-off-by: John Lo <loj@cisco.com>
Change-Id: I0f24161d027b07c188fd1e05276146f94c075710
|
|
Type: fix
Change-Id: Id6687780b9a740323bd2eef58447864e70dc0235
Signed-off-by: Ignas Bacius <ignas@noia.network>
|
|
Type: fix
Change-Id: I9cdfbffd6333d090f970422bf047aaa90c1e4c65
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: refactor
Change-Id: I2acbd864186c1d7694701c047ba72f58750a8558
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
'quit' and 'show terminal' are valid for non-interactive sessions too.
Type: fix
Fixes: a58be82dda89d6496f92e451b42eee31f0cf47b4
Change-Id: Ib63244c7b64ad2e30c257ed19e982295f59bfffa
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: refactor
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I145ff3301f168973c4f7f32c337bbcac47900705
|
|
Identified and removed executable bit from source files in the tree.
find . -perm 755 -name *.[ch] -exec chmod a-x {} \;
Type: improvement
Signed-off-by: Ray Kinsella <mdr@ashroe.eu>
Change-Id: I00710d59fcc46ce5be5233109af4c8077daff74b
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Iae734a526d2e7befd9738054d028df0062b67000
|
|
Shut off deprecated declaration warnings
Type: fix
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I65ea4bbc4d5ee5a11d4e8f554f414f57944c7e1c
|