Age | Commit message (Collapse) | Author | Files | Lines |
|
Change-Id: Ib92794205027d3242c6f0c8962fe02ac38c7129b
Signed-off-by: Krishanpal singh <krish.singh03@gmail.com>
|
|
- update of CSIT operational branch to be used for VPP-patch test
Change-Id: I5ad0e36fa40095cc107a31b32dd2bbf936636dc4
Signed-off-by: Jan Gelety <jgelety@cisco.com>
|
|
Change-Id: I0e20100c9e2ca4e951f605a79d48c04ff47864cb
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
- GRE tunnels with the same src,dst addresses are not the same tunnel
- Two data-plane improvements:
- the cached key was never updated and so useless
- no need to dereference the tunnel's HW interface to get the sw_if_index
Change-Id: I2f2ea6e08c759a810b753cec22c497e921a2ca01
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
This allows arm platforms to also take advantage of crc32 hardware
acceleration.
* add a wrapper for crc32_u64. It's the only one really used. Using it
instead of a call to clib_crc32c() eases building symmetrical hash
functions.
* replace #ifdef on SSE4 by a test on clib_crc32c_uses_intrinsics.
Note: keep the test on i386
* fix typo in lb test log
Change-Id: I03a0897b70f6c1717e6901d93cf0fe024d5facb5
Signed-off-by: Gabriel Ganne <gabriel.ganne@enea.com>
|
|
Change-Id: I1699e440052faa317b06d46692e8656a41d21bfe
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Queue RPC calls and send them from the main dispatch loop. As things stood,
if the vpp main input queue filled, worker threads could enter a
barrier-sync spin-wait in the middle of processing a frame. If thread
0 decided to recreate worker thread data structures, the worker thread(s)
could easily crash.
Legislate the problem out of existence by enqueueing RPC messages only
from the main dispatch loop. At that point, doing a barrier-sync wait
is perfectly OK.
Change-Id: I18da3e44bb1f29a63fe5f30cf11de732ecfd5bf7
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: Ifa9966a27586a1a65038d069cf4a1e6e21a72d45
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Send packets to ip4/6_punt/drop nodes instead of error-drop/punt nodes
dbarach: clean up an annoying checkstyle issue: indent 2.2.10
(OpenSUSE version) and indent 2.2.11 (Ubuntu / CentOS versions) had an
artistic disagreement about ip_frag.c.
Change-Id: I660bee28a064af9c6c70371363081e941d1c3a94
Signed-off-by: Vijayabhaskar Katamreddy <vkatamre@cisco.com>
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
same as commit d3e671e0dbb879d90f00bdee608ee0bb5f6357ae did for centos
Change-Id: If57765490d1ef41042a42db433b704af2f0c0ffd
Signed-off-by: Gabriel Ganne <gabriel.ganne@enea.com>
|
|
- Fix broken unit test code.
- Check for NULL ptr in vppcom_session_attr()
VPPCOM_ATTR_GET_*_ADDR endpoint parameters.
Change-Id: I01169edce098ee855a9cba08893c2b08c93ea6c3
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
Change-Id: Ic9c1c70e06b953538ed43fc91ed26b6be82ce812
Signed-off-by: Kevin Wang <kevin.wang@arm.com>
|
|
Change-Id: I465282e513b6a0482e96dd02fc7e0e4ed3e3731a
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I941abdc4a02e4c52c66b9d299e380b27caca7c1d
Signed-off-by: “mystarrocks” <mystarrocks@yahoo.com>
|
|
Change-Id: I7ffaceb992d12fd255fe8a608b0493c2993c18c2
Signed-off-by: Keith Burns (alagalah) <alagalah@gmail.com>
|
|
Change-Id: Ib3e25916c66fa3e1b082359095652c45d3b27d0f
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: I23081ea25a8d40d8ebe1fcb6efe4143e9c5a0fc6
Signed-off-by: Swarup Nayak <swarupnpvt@gmail.com>
|
|
Change-Id: Ib4012ff598698924484525932d041988cc4c63f6
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
New constructor can construct the l3 rule
using all or partial paratmeters.
Change-Id: I828ec1c4713decb5824e4a73c3692cebc2324cc2
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Change-Id: I341f522b46dd85fb3b1dd43fd125513f16f89171
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Taken from DPDK, also AVX2 variant updated to be in sync with DPDK
version.
Change-Id: I8a42e4141a5a1a8cfbee328b07bd0c9b38a9eb05
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I097a738b96a304621520f1842dcac7dbf61a8e3f
Signed-off-by: Milan Lenco <milan.lenco@pantheon.tech>
|
|
"This time, for sure..."
Change-Id: Ie981003842d37c5eb6a0b2fe3abe974a93b86df8
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Elastic Network Adapter PMD for newer AWS instance types
Change-Id: Ic7f6ac4a261ccc7af3ffb2ed8950274532e3feae
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
CIDs 180713 and 180714
Change-Id: Ia4856d1a62f176e99983f8c82eaa09d5df9d4ca5
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: I7196ad8bf6afaf356674789c05e23ac000bc038e
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I39d21d15677f57e10b69b8842f2cbca277abddf0
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I655382f7f74181dd7c795a2b22f151f76b50e793
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
The "test-all" target is still never called as part of any continuous
test (as it probably should) but at least it can now be expected to
succeed.
VXLAN-GPE:
* decapsulate Ethernet to "l2-input" instead of "ethernet-input"
otherwise the inner mac address get checked against the interface one
(external) and packet gets dropped (mac mismatch)
* set packet input sw_if_index to unicast vxlan tunnel for learning
TEST:
* VXLAN:
* reduce the number of share tunnels:
=> reduce test duration by half
=> no functional change
* VXLAN-GPE:
* fix test TearDown() cli: command is "show vxlan-gpe" only
* remove vxlan-gpe specific tests as the were a duplicated of the
BridgeDomain one and already inherited.
* disable test_mcast_rcv() and test_mcast_flood() tests
* P2PEthernetAPI:
* remove test: "create 100k of p2p subifs"
there already is a "create 1k p2p subifs" so this one is a load test
and not a unit test.
See: lists.fd.io/pipermail/vpp-dev/2017-November/007280.html
Change-Id: Icafb83769eb560cbdeb3dc6d1f1d3c23c0901cd9
Signed-off-by: Gabriel Ganne <gabriel.ganne@enea.com>
|
|
Change-Id: I497305d9a4fd556ed8b4a7ceb3654df94ff98f56
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I18e9227565243bce7d4102b1950eec9e019a097a
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I497e9f6489dd35219bcf2b51ac992467aac4c8eb
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I64e8a76a17057ae69de72a5a80c0a194cd0c21cb
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Iebf859b6d86482e4465423bad598eecf87e53ec4
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
(VPP-1090)
Change-Id: I361c043979274eac1aefcd95abdf1624a3ef2756
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: Ifa37767eb2c3cfc343f54691e6042473a6adf474
Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
|
|
Change-Id: I4c22ad08bf8fa3e8f05b8938ff447cafa4eea5b2
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
Change-Id: I3255cd1be4ae4ec8d09574183c96f59028374a5e
Signed-off-by: Swarup Nayak <swarupnpvt@gmail.com>
|
|
Change-Id: Ifabb8d22d20bc1031664d5f004e74cd363759ab6
Signed-off-by: sharath reddy <sharathkumarboyanapally@gmail.com>
|
|
Change-Id: Ic551af286aa84293deb260560c12def430449598
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: Icb93ab80c5a6432d7b2b698a47e8b612c6f06fbd
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Ia7cb4dc18710d15352629d78d9e0c34fb65762f3
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I46b4aeb6ec9ab6ee462f9c5074b5778d94bf8dc3
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I3d93f74419269448731e66708443625f43925baf
Signed-off-by: Marco Varlese <marco.varlese@suse.de>
|
|
Change-Id: I0a0f8c9aad1530d18c70c962e729e84948a074ee
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
exist in configuration
Change-Id: I01a69c4eef2c6224a24907b8fed12dcb1b642307
Signed-off-by: Swarup Nayak <swarupnpvt@gmail.com>
|
|
- compute session type out of transport and network protos
- make session, session lookup and session queue code network protocol
agnostic
This does not update the session layer to support non-ip network layer
protocols
Change-Id: Ifc2f92845e158b649d59462eb7d51c12af536691
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
macip_acl_add_replace on an existing MACIP ACL
The classifier tables layout might (and most always will) change during the MACIP ACL modification.
Furthermore, vnet_set_input_acl_intfc() is quite a picky creature - it quietly does nothing
if there is an existing inacl applied, even if the number is different, so a simple "reapply"
does not work. So, cleanly remove inacl, then reapply when the new tables are ready.
Also, fix the testcase which was supposed to test this exact behavior.
Thanks to Jon Loeliger for spotting this issue.
Change-Id: I7e4bd8023d9de7e914448bb4466c1b0ef6940f58
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Change-Id: Id10f10889c3036a6db21c999c1e6c54fc1770213
Signed-off-by: Swarup Nayak <swarupnpvt@gmail.com>
|
|
Change-Id: Ibac5a4588e66f6d3ad42dd2583e1e84b7d2314c4
Signed-off-by: sharath reddy <sharathkumarboyanapally@gmail.com>
|