Age | Commit message (Collapse) | Author | Files | Lines |
|
Avoid explicit manipulation of session state and generate closing event
if need be.
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I07cda1db08a2673b27b496ea1371b0dfd8e6f98a
|
|
Type: improvement
Change-Id: I4e2b2e4f227dfcb3df36166db13c8aa5c0b603f5
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
Change-Id: Iea5ecca5d4cbc6c7aea69104830afcfe78c708ee
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
Buffer needs to be rewinded before being passed to punt-dispatch node.
Change-Id: I43d103515d372e425f4c3b08ca1779398f1fced4
Signed-off-by: Sylvain Cadilhac <sylvain.cadilhac@freepro.com>
|
|
Type: improvement
buffer size can be configurable:
./test_app -b 9216
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: Id77f6baac27d45dec3d5b7ea8a9a53acf2a302fc
|
|
Type: fix
Fixes: 00ea98ad6
Change-Id: I4ac8c9c5902299d5f283ba4912d52d9bfcedef5c
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
Type: test
Change-Id: Ie681ee43007f4fe787d51d80bda9b433dcb6c09a
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
App transports like TLS can close sessions on tx and consequently
generate new events. That can realloc the event pool.
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I58a97502acc1182b3d051ba1aa9e0e98c16f4593
|
|
To allow dynamic registration of device classes..."
Change-Id: Ie8435e8c55b7e300be06abe97b653c0c3ce7f732
Type: improvement
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Ieafbed6f2db3dec65e4b43d84a4661f6a1bbe891
Type: improvement
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
Fixes: cc8249c
Change-Id: Iebfbbd1e00782c4097cc840460b5177d18921131
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: test
Change-Id: Ib1131eedb8eeaa9adfed9cfc47beeb1c7c8adb5c
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Type: improvement
Change-Id: I7525aa81acf073707550b23541fdcc358b9bf49c
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Small mistake was made, reported by coverty scan.
Type: fix
Change-Id: I98ca16c0275a94b2def99831f9353d4ff3fe93a9
Signed-off-by: Maxime Peim <mpeim@cisco.com>
|
|
The following issues are fixed:
* in responder code: do lookup again as the old pointer could be
invalidated during the cleanup operation
* in initiar code: do the cleanup of session if there're no child SAs or
if there's no response from the responder during initial request (this
can easily happen if the response packet was lost/dropped/etc)
* print the state of ikev2 profile (for easier tshooting)
Type: fix
Change-Id: I853d9851c0cf131696585e3c98fa97e66789badd
Signed-off-by: Stanislav Zaikin <stanislav.zaikin@46labs.com>
|
|
Type: fix
Change-Id: I438ef488357456e9415e51a17355e9eba8518808
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
It is a function in vlib, so no reason to mention vnet.
Type: fix
Fixes: bf179a91d8d224c64d08643a2bb52580f68ce96b
Change-Id: Ic5f601d94d88b667f7ce44a017a0e1d5b4db5da1
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
The extra format line was added for no reason from patch ff27c9f8e.
Type: fix
Fixes: ff27c9f8e
Change-Id: Ib25149cc8a17c29d0c8a0dbc06f0ea12ca4f328c
Signed-off-by: Steven Luong <sluong@cisco.com>
|
|
Type: improvement
Change-Id: Ie0bad9e03ac2e29da23af01ee7f63cb44489ad9c
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Type: improvement
Change-Id: Ic6e60597d2be63e3a0ae4399a81dbbd72392f30d
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: feature
Change-Id: I28fb38e49c89f4c4d4cc58c1a5c0aa8502678472
Signed-off-by: Maxime Peim <mpeim@cisco.com>
|
|
clang-16 complains about signed one-bit bitfield value changes
from 1 to -1. Use unsigned type instead.
Type: fix
Signed-off-by: Tianyu Li <tianyu.li@arm.com>
Change-Id: I84f8cf314d36183a5e6f544cd756c01d1d10a1a5
|
|
In the current implementation there is a bug related to the incorrect
message handling due to the wrong id.
The fix changes logic responsible for handling incoming API messages
by correcting their ids.
Type: fix
Signed-off-by: Gabriel Oginski <gabrielx.oginski@intel.com>
Change-Id: Iea29506053c9fd2e1d01bce83e7f4a6e1de39321
|
|
Type: improvement
Support SO_ORIGINAL_DST socket option to get original dst_ip4 and dst_port if nat44 rule enabled.
Change-Id: If00e00d03e48f3b78a23a68f1b078954d79dd0f7
Signed-off-by: qinyang <qiny@yusur.tech>
|
|
Type: test
Change-Id: I6edc8858b802d3d32159d71c1e867a06cc1025d5
Signed-off-by: Naveen Joy <najoy@cisco.com>
|
|
When _VEC128 instructions are not enabled logic is buggy.
The function always returned 1.
Type: fix
Signed-off-by: Piotr Bronowski <piotrx.bronowski@intel.com>
Change-Id: I603200637e8d65813f4e49ef15d798e74b79b9cf
|
|
When msg->msg_controllen is set in recvmsg, the caller wants to receive
additional information about the messages. However, they might not
always be available. In that case, we should clear cmsg since
the caller uses CMSG_NXTHDR which might access uninitialized fields in
cmsg.
Type: fix
Change-Id: Ifdf9634bfcb1427f7ae3812014a46bfd7f4bc473
Signed-off-by: Steven Luong <sluong@cisco.com>
|
|
This patch addresses the issue when the list of available interfaces
is not up to date. Due to this issue adding a new route fails
and finally the connection is not established.
Type: fix
Signed-off-by: Gabriel Oginski <gabrielx.oginski@intel.com>
Change-Id: I3a63c0dd99ebc28ea149b4b23867440937682761
|
|
This patch addresses the issue where the message ID registration
in the register_event function is incorrect. Due to this incorrect
registration, the lookup for the corresponding callback on received
messages fails, eventually leading to a segmentation fault
and double-free memory space.
Type: fix
Signed-off-by: Gabriel Oginski <gabrielx.oginski@intel.com>
Change-Id: If95182f972f64adb44d514e18c831cc9627d8f0f
|
|
In the current implementation there is a bug in the function
responsible for getting software interface index by the name of the
interface. Incorrect function is used to send the API message, also
the handler with replied message is incorrect.
The fix changes function to send dump message and also adds handler
with replied message in the correct way.
Type: fix
Signed-off-by: Gabriel Oginski <gabrielx.oginski@intel.com>
Change-Id: Id1a3ba2ce7e92d216907f344431b9e2acb1d5572
|
|
- Move the VPP API Change Process documentation
from the wiki page into the in-tree VPP docs
Type: docs
Change-Id: I42f661618b8632230bebe3aa8fbad455b9a05d01
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
Type: improvement
There is a mode field in ipip_tunnel_details. The handler for the dump
API does not do anything to populate it so it always contains 0
(TUNNEL_API_MODE_P2P). This is correct for p2p tunnels but is wrong for
multipoint tunnels.
Populate the field with the correct mode.
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
Change-Id: I6c1288a0d3929db0f67100748b5760c36b594f97
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ieb2d1e6e0949844a70c81b218ca7dc83690776ca
|
|
Before this fix, the src_ip_sticky flag was passed as an argument to
the lb_node_get_hash function, which computes a hash value for a packet.
However, in per-port-vip case, the value of src_ip_sticky flag may be
different for each port number. As a result, the value is the same for
all port numbers, even though it is a per-port-vip case.
This commit fixes the src_ip_sticky evaluation by delaying it until the
packet is received, so that the correct value is obtained. Also, the
unit test case has been enhanced for this bug fix.
The steps to reproduce this bug are described below:
https://lists.fd.io/g/vpp-dev/message/23248
Type: fix
Fixes: 613e6dc0bf92 ("lb: add source ip based sticky load balancing")
Change-Id: I483492b214a1768e7a21fd86edd5151b3c46528b
Signed-off-by: Nobuhiro MIKI <nmiki@yahoo-corp.jp>
|
|
nl_route_add() recently started to use its optional argument to check
whether replace flag is set for the message. When notification messages
are processed, the argument is a pointer to the corresponding message
info. However, when dump replies are processed, the argument is a null
pointer. This leads to null pointer dereference and crash when dump of
routes is processed.
With this fix, check for replace flag only if message info was passed
to nl_route_add(). Otherwise, assume the flag is not set. Dump replies
do not have it set.
Type: fix
Change-Id: Icb04a1146e09cc965b623018c28f91b347be0eab
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
|
|
Type: improvement
Change-Id: I95023d2e6034b77952e0423d0430b433ea0dab15
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
1) Imports ENCAP_MPLS labels from IPv4/IPv6 routes.
Note that this requires libnl 3.6.0 or newer.
In previous patches, the fib_path_ext_t had a path ID of -1.
After a long investigation, it turned out to be caused by route weight
being set to 0. There is a comment explaining more details.
2) Handles MPLS routes.
MPLS routes were wrongly added as IPv4 routes before.
POP and SWAP are now both supported.
All the routes are installed as NON-EOS and EOS routes,
as the Linux kernel does not differentiate.
EOS POP used in PHP uses the next-hop address family
to determine the resulting address family.
This patch is sufficient for P setups.
PE setups with implicit null should also function okay, as long as a
seperate label gets programmed per address family.
PE setups with explicit null will also forward packets,
but punting is a bit odd and needs MPLS input enabled on the LCP host
device.
3) Propagate MPLS input state to LCP Pair and Linux.
Since the Linux kernel uses the MPLS routes itself,
the LCP pair tap needs MPLS enabled to allow host originated packets.
This also syncs the Linux `net.mpls.conf.<host_if>.input` sysctl to
allow punted packets to have MPLS labels, mostly explicit nulls.
In addition, a special feature is enabled to cross connect MPLS packets
coming from Linux directly to interface-output untouched.
Make sure to enable MPLS/add a table in VPP first and load the
MPLS kernel modules!!
Type: feature
Change-Id: Ie4184bb4cc96905bf8b483a27e7ca6d251697374
Signed-off-by: Adrian Pistol <vifino@posteo.net>
Signed-off-by: Pim van Pelt <pim@ipng.nl>
|
|
stats entries /if/names are never deleted as it is a vector of the
sw_if_index value. When the interface is deleted and then created again
later, and if the new interface takes a different sw_if_index, we may
end up with duplicate entries for the same interface name. For example,
the following configuration sequence causes problem
create loopback interface
create loopback interface
delete loopback interface intfc loop0
delete loopback interface intfc loop1
create loopback interface
vpp_get_stats dump /if/names
[0]: local0 /if/names
[1]: loop0 /if/names
[2]: loop0 /if/names
The fix is to set the delete /if/names entry to deleted when the interface is deleted.
Type: fix
Change-Id: I7d811b12d56e3cf8c7deffe14736ea0f24814d02
Signed-off-by: Steven Luong <sluong@cisco.com>
|
|
clang-16 complains about signed one-bit bitfield value
changes from 1 to -1. Use unsigned type instead.
Type: fix
Signed-off-by: Tianyu Li <tianyu.li@arm.com>
Change-Id: Iab006c036d4068af2fe3caaefc871a95b26cc578
|
|
List of changed messages:
- lcp_itf_pair_add_del
- lcp_itf_pair_add_del_reply
- lcp_itf_pair_add_del_v2
- lcp_itf_pair_add_del_v2_reply
This change is part of VPP API cleanup initiative.
Type: fix
Signed-off-by: Ondrej Fabry <ofabry@cisco.com>
Change-Id: Ic20a852dd1fb27858c8776095f9c98757b89bfe8
|
|
List of changed messages:
- ip_punt_redirect_dump
- ip_punt_redirect_details
This change is part of VPP API cleanup initiative.
Type: fix
Signed-off-by: Ondrej Fabry <ofabry@cisco.com>
Change-Id: Icf91f760b9bd328110b0f9fc2e421bb954033d21
|
|
List of changed messages:
- memif_socket_filename_add_del
- memif_socket_filename_add_del_reply
- memif_create
- memif_create_reply
This change is part of VPP API cleanup initiative.
Type: fix
Signed-off-by: Ondrej Fabry <ofabry@cisco.com>
Change-Id: Id334990584b64a0efa3c28a3d8b6b641adab8c09
|
|
List of changed messages:
- memclnt_create
- memclnt_create_reply
This change is part of VPP API cleanup initiative.
Type: fix
Signed-off-by: Ondrej Fabry <ofabry@cisco.com>
Change-Id: I0031cc2f1604ca4c34574c8e1ee28e358c2bbe5d
|
|
List of changed messages:
- pg_create_interface
- pg_create_interface_reply
This change is part of VPP API cleanup initiative.
Type: fix
Signed-off-by: Ondrej Fabry <ofabry@cisco.com>
Change-Id: I574927f0820c54d748f27fd96a45afec5243b645
|
|
List of changed messages:
- sr_policies_dump
This change is part of VPP API cleanup initiative.
Type: fix
Signed-off-by: Ondrej Fabry <ofabry@cisco.com>
Change-Id: I16ae1bed83ad8c73e3254b6d195251702de84f97
|
|
List of changed messages:
- ipsec_sad_entry_add_del_v2
- ipsec_sad_entry_add_del_v2_reply
- ipsec_sa_v2_dump
- ipsec_sa_v2_details
This change is part of VPP API cleanup initiative.
Type: fix
Signed-off-by: Ondrej Fabry <ofabry@cisco.com>
Change-Id: I8fd6906e9684ef7ebc0688dc8b0637ae2dc8d0a2
|
|
Enabling debug info RPM creation in spec file.
Type: fix
Signed-off-by: Laszlo Kiraly <laszlo.kiraly@est.tech>
Change-Id: Id284b135ec4125905145f7902a6e1cf42ba65aa4
|
|
VPP build failed when build xdp-tool on opensuse
Add the missing libraries and headers.
Type: fix
Signed-off-by: Laszlo Kiraly <laszlo.kiraly@est.tech>
Change-Id: I8c3f28ac6e88cd61a1bf0a823ffa1d5f3097be40
|
|
This patch introduces sw_ring to the crypto op data path implementation,
so that raw data path and crypto op data path use same mechanism of processing
async frames. Crypto op ring has been removed from the implementation.
Type: improvement
Signed-off-by: Piotr Bronowski <piotrx.bronowski@intel.com>
Change-Id: Id823f80a88cfa0ff40252616a36de8bb044c7f45
|
|
Python Dict attribute "has_key" was removed in Python3. Use "in"
operation instead.
Type: fix
Signed-off-by: Ting Xu <ting.xu@intel.com>
Change-Id: I7b63b0689e9970ca798921368c5616875f7d5682
|