Age | Commit message (Collapse) | Author | Files | Lines |
|
Type: test
Change-Id: Ia285ff39d9b19464ea086ec847ceaf52c6c0195c
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Ensure alignment between the Intel IPsec-mb library on the
host and VPP targets.If the version of Intel ipsec-mb on the
host is misaligned with the targets,terminate the compilation
process to prevent potential library linkage issues.
Type: fix
Change-Id: I38864115d59ae09fb5556ad4a29e884ebace8155
Signed-off-by: Ranjan Raj <ranjanx.raj@intel.com>
|
|
Type: test
Change-Id: I8f3f4c464907356bb1990ea53f0f46befc057acf
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Type: test
Change-Id: Iad744c4b3f79820e8bd0dd2ef9f18e4f7718e845
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Prevent comparison ops for uninitialized IPv6 prefix bytes.
Type: fix
Change-Id: I440fea7f0725769406ad348eb3402a98c593dc3c
Signed-off-by: Alexander Skorichenko <askorichenko@netgate.com>
|
|
Signal when consuming a batch of netlink messages, in order to inhibit
lcp_sync from generating new netlink messages. This avoids link up/down
state changess from triggering an infinite loop.
Do this in the regular case of nl_route_process_msgs()
and in the special case of re-synchronizing in lcp_nl_recv_dump_replies().
Type: fix
Change-Id: I419d3f9aa350c119b3778b644c65165cb4cc1bef
Signed-off-by: Pim van Pelt <pim@ipng.nl>
|
|
Add an urpf_interface_dump() API call, with optional sw_if_index.
If either a mode or a table is specified in any given interface
address family and direction, return it in a list, otherwise omit
it.
TESTED:
create loopback interface instance 0
create loopback interface instance 1
create loopback interface instance 2
create loopback interface instance 3
ip6 table add 8298
set urpf ip4 rx loose loop1
set urpf ip6 tx off loop2 table 8298
API call urpf_interface_dump(sw_if_index=~1) returns:
[
urpf_interface_details(_0=658, context=2, sw_if_index=2, is_rx=True, mode=<vl_api_urpf_mode_t.URPF_API_MODE_LOOSE: 1>, af=<vl_api_address_family_t.ADDRESS_IP4: 0>, table_id=0),
urpf_interface_details(_0=658, context=2, sw_if_index=3, is_rx=False, mode=<vl_api_urpf_mode_t.URPF_API_MODE_OFF: 0>, af=<vl_api_address_family_t.ADDRESS_IP6: 1>, table_id=8298)
]
Type: improvement
Change-Id: I1ded5c445dc07dab73ea41b817b5827b72ca79d4
Signed-off-by: pim@ipng.nl
|
|
One less pointer chase when accepting sessions.
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I20dbb21d15d4a703f76e3b12f04a6f5b5d2a3cd8
|
|
Adds support for connectionless listener port reuse. Until now, cl
listeners had fifos allocated to them and therefore only one app worker
could ever listen, i.e., a session cannot have multiple fifos.
To circumvent the limitation, this separates the fifos from the listener
by allocating new cl sessions for each app worker that reuses the app
listener. Flows are hashed to app worker cl sessions but, for now, this
is not a consistent/fixed hash.
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ic6533cd47f2765903669f88c288bd592fb17a19e
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ia98556e7ae61547cf153c78ec085cd4248bee74a
|
|
Type: docs
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: I994d843a035e6afc4b72d06745d2be74cd81cd3a
|
|
Currently, when flowprobe_export_send() calls vlib_time_now(), a pointer
to the main thread's vlib_main_t is always passed (the one cached in
flow_report_main). However, that code can also be executed from a worker
thread. And passing a pointer to the main thread's vlib_main_t to
vlib_time_now() from a worker thread may cause time synchronization
issues. Also, running a debug binary will cause an assertion failure in
vlib_time_now() in this case.
With this fix, flowprobe_export_send() passes the pointer to the current
thread's vlib_main_t to vlib_time_how().
This doesn't allow to remove @tag_fixme_vpp_workers from the unit tests
yet as they will be failing for other multi-worker related problems.
Type: fix
Change-Id: Ia35e3a4176777b88cf8ca8af8af7c42c495cbc6a
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
|
|
Type: improvement
Change-Id: I57a816fbed8b681dec201edc8d5950a34a555a2b
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Fix minor differences between Ubuntu 18.04 LTS and Ubuntu 22.04 LTS when
using the scheme to test new code.
Type: docs
Change-Id: I5810b6f3d76d8d98fa764b61828b1ca32507bd91
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I0bb6aba26f1cd974d6bb3b5fe6234aacfee0d30c
|
|
Type: improvement
Change-Id: Ica9d87abde7a1dc0b4007911a7e0abab46dfb75d
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: test
Change-Id: Idd608511ed350a8e13afff393e558e20d52627a0
Signed-off-by: adrianvillin <avillin@cisco.com>
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I4d17ae3f7736dc10c68ca6e304699ea39d012f6c
|
|
Quic does not seed random value, so if the plugin is loaded
separately RAND_bytes will fail.
Type: fix
Change-Id: If600cbde1fef30afb6316fc1a355261b008c3191
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Incase the ack for the fin is lost twice or want to dup ack
packets with incorrect ack/seq # at different times and
session state is already closed, this fifo event is set for
the first ack that went out and prevents queuing of further events.
Type: fix
Change-Id: I102019fca26918a51e055a751db7209011bd43ad
Signed-off-by: emmanuel <emmanuelscaria11@gmail.com>
|
|
Use lowercased hex in uuid in sysfs/vmbus names
Type: fix
Change-Id: Ic4b7b995441723dc1b29ff8a75346cc8ba7f85f1
Signed-off-by: Alexander Skorichenko <askorichenko@netgate.com>
|
|
Type: fix
Added error checks around pthread_setaffinity_np
calls to stop vpp launch if pinning fails.
Change-Id: Iec391c485d1832b6c2ff20fbf789608f6bcf7b57
Signed-off-by: hsandid <halsandi@cisco.com>
|
|
- gmake set CC=cc as the default therefore the test/test-debug
makefile targets will build using gcc (cc == gcc for debian/ubuntu
distros) unless set explicitly to clang due to use of 'CC=$(CC)' in
test macro.
Note: the CI builds vpp images prior to running 'make test', thus
the CI does test vpp built using clang. This basically makes local
runs of 'make test' build using clang as well.
Type: make
Change-Id: I7221098c200be23b53bb616e41a42a6d65a03699
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
Type: improvement
Change-Id: I3047b4a750581d68053f522479b23865e3da2505
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Icd616989a525ef0be6c73a2ad91ae4871cf3921d
Type: improvement
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Ia9fa6fab6288b4d0876022e72bf4f49bd00a19d2
Type: improvement
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
This patch allows the formatting of deleted Load-balancer
objects. This is needed in the case a trace references a DPO
that went away in the interim.
Type: improvement
Change-Id: I6d67519b8d62f69aafde3c8fe3065bc85a7adbde
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: test
Change-Id: I711dfe65ad542a45acd484f0b4e3e6ade9576f66
Signed-off-by: Naveen Joy <najoy@cisco.com>
|
|
In the API there is a difference between enum and enumflags.
The latter one allowing multiple set entitires, while enum
only allows one.
Type: fix
Change-Id: I5db88c15c85fc6c7130b7b35febcd1ea02ef8f76
Signed-off-by: Ole Troan <otroan@employees.org>
|
|
This merge request adds the feature to manipulate localsids and policies for SRv6 mobile via API.
Type: feature
Signed-off-by: Takeru Hayasaka <hayatake396@gmail.com>
Change-Id: Ibb46bf71ae1d9d4591ce2c8ccf66f520887dad70
|
|
Type: improvement
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: Ic124f44e64bd60f41e750b4118be3e8d1d1eb70b
|
|
Type: test
Change-Id: Ic1ad2f1f983ad8f8e8e8813f941e11757930c92e
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Type: test
Change-Id: I0226227dc756a5a3af5e9d3b0d65a38c0aa55b3d
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Type: test
Change-Id: I026d9298fe1372d03f61b6ad57c82628bab4c831
Signed-off-by: adrianvillin <avillin@cisco.com>
|
|
The _v3 was not handling endianness on flags (e.g. mode).
Marking _v3 as deprecated, but keeping it
as there might be users who learned to preprocess their flag values.
+ Also, format PCI product_name as a vector, not a string.
Type: fix
Change-Id: I50c4b44f3570f02518dbd9a43239c1a37612d24a
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
Type: improvement
Change-Id: Iebf9ee8275a92e962679e3d0d22d33ed0bd8b3ab
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I0e58bb970d371818217390d451cf26925b04970f
|
|
Change-Id: I7ac5693ca547fe7249e7b6297bade70a6052b169
Type: improvement
Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
|
|
If ho cleans up on first worker before owner of established session
receives connected notification, the ho session is prematurely cleaned
up.
Wait for established ctx to be allocated before freeing ho.
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Icf707e5d8c62a288a49d078460d2ada3b5c41b0e
|
|
Type: fix
Change-Id: I9df43a34328209c87177a534d08919dda0af6096
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
- Per dpdk 23.11 release notes (rdma-core >= 48.0)
Type: feature
Change-Id: I6f73fdfd2226c501d22cd16e5c47500ff05fbff3
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
Type: feature
Change-Id: I7b29c71d3d053af9a53931aa333484bf43a424ca
Signed-off-by: Arthur de Kerhor <arthurdekerhor@gmail.com>
Signed-off-by: BenoƮt Ganne <bganne@cisco.com>
|
|
Type: fix
Modified alignment cast causing crash issues
Change-Id: Iae3bb767ef2ba81466bf1567264a4c76ae45bb92
Signed-off-by: hsandid <halsandi@cisco.com>
|
|
Type: improvement
Change-Id: I7972f595444eacdb020f3fa2a60331c40766fc0b
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Even if the device name is specified in the startup config it may
be appended to if the device is a switch domain member. This leads
to unexpected device naming if an explicit device name was requested.
Type: fix
Change-Id: Ib56b4ac41c17008db55dc69497721e3cb7d540c1
Signed-off-by: Peter Morrow <pdmorrow@gmail.com>
|
|
This patch introduces a fix for correcting a counter for the number
of processed vectors in the crypto-dispatch node.
Type: fix
Signed-off-by: Piotr Bronowski <piotrx.bronowski@intel.com>
Change-Id: Icaeb925a352a9ac766652f43c4e752f6727cdeb9
|
|
Use the correct string type for vlib_get_node_by_name. Found by ASAN.
Type: fix
Signed-off-by: Dmitry Valter <d-valter@yandex-team.com>
Change-Id: I679d27050487e013e3320a4c558d78fa60c5e98a
|
|
This patch update the Intel IPsec-MB lib to v1.5
Type: feature
Change-Id: Ib2b5d28866f52d428d9400318cffcae11f935c3f
Signed-off-by: Ranjan Raj <ranjanx.raj@intel.com>
|
|
This patch prevents the sw interfaces format
function to fail when the interface was deleted.
It also prints the swifindex alongside the 'DELETED'
keyword.
Printing deleted swifindex should not happen, but it is still
helpful to have these safeguards for troubleshooting in the case
invariants get corrupted (e.g. fib entry refcounts, ...)
Type: improvement
Change-Id: I66711049db2eebe0ad17e37c3a260ac81d1e5134
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
This patch bumps DPDK version to 23.11
Type: feature
Change-Id: Id19fa6e2789ffa3264614a011656dfe2303173ab
Signed-off-by: Kai Ji <kai.ji@intel.com>
|