Age | Commit message (Collapse) | Author | Files | Lines |
|
The crypto op data offset passed into DPDK is relative to the mbuf
buffer address plus the mbuf data offset, therefore the mbuf data
offset needs to be set rather than left at whatever previous value it
was at, which is likely to be incorrect and result in the wrong
portion of the packet being encrypted/decrypted for GCM.
The fe->crypto_start_offset field is relative to the start of the vlib
buffer (as opposed to the current data pointer), so set the mbuf
data_off field to VLIB_BUFFER_PRE_DATA_SIZE when performing a GCM
crypto op enqueue to match the crypto_start_offset semantics. This
then matches the behaviour in the non-GCM case.
Type: fix
Change-Id: I0ac2a44139387158765a3e04cfcaa5ee6f11d395
Signed-off-by: Robert Shearman <robertshearman@gmail.com>
|
|
Type: fix
Change-Id: I170f9d8c685f59b7ccf6f9ee7fdc1dcdf2a54fe1
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Type: improvement
Change-Id: If35b40168414807e928cb3026633ae9d2fa703ed
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Add branches, branches taken (a meteric for branchy code), and branch
misses.
Type: improvement
Signed-off-by: Ray Kinsella <mdr@ashroe.eu>
Change-Id: If92d4aaf9d0a6e3b99b8c19e6311cc08ca470590
|
|
Type: feature
Change-Id: Ibfc412200ef5932fa40423075967df6d9156f3ed
Signed-off-by: Francois Clad <fclad@cisco.com>
|
|
Use actual thread index from hash table instead of doing calculation.
Calculated index might be different and could lead to crash.
Type: fix
Change-Id: Iede9a67fbe541cb44eccd0d6ddf4e2c51eb35423
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Type: fix
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: Ibbb72e77c751b7e775620cfb160b52ceff2da86b
|
|
Type: fix
Coverity scan issue fix.
Change-Id: I9036fade15fd381da9c1e6b575f250fdcb21f876
Signed-off-by: Filip Varga <fivarga@cisco.com>
|
|
Type: improvement
Adding support for enable&disable calls
(dynamic plugin configuration).
API (nat66_plugin_enable_disable) and
CLI (nat66 plugin enable/nat66 plugin disable) with support for
outside_vrf id configuration.
Change-Id: I5637ff1621d6662adc3b7c6f7f8176d84a4b492b
Signed-off-by: Filip Varga <fivarga@cisco.com>
|
|
This avoids
ModuleNotFoundError: No module named 'virtualenv.seed.embed.via_app_data'
https://github.com/pypa/virtualenv/issues/1873
Type: fix
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: I860cc8c4ad2ba509815c5e7cf02fa5e01ee2ed63
|
|
Signal, and implicitly run, main thread session queue node via
interrupts instead of the queue process node.
Process node still needed for timers.
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I5efd393effc8dad65e4125a3d0ad1be6b7484cb7
|
|
Type: fix
Change-Id: Ia7652fe8e8c20f4f7a019ab7ca0649c2180c7e90
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
The reimplementation of python stats module mishandled the case
where pattern to ls was not a list.
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I9ba189423a76f2fd4298c4c4b19a0875f705d719
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I65373f2cd5a33381da1e51ed7ab7a8b1358cef29
|
|
Type: feature
Added make target to install VPPTop - real-time
viewer of VPP metrics.
New targets in /extras/vpptop/Makefile:
* make start - starts the installed VPPTop binary
* make install - does the installation using the local VPP API
* make cleanup - removes the VPPTop local directory
* make help - prints the VPPTop help info
Signed-off-by: Vladimir Lavor <vlavor@cisco.com>
Change-Id: I1b93eaf67214e1fe0567d43409763882caea6416
|
|
Use correct vlib_main() in various code parts. Fix tests.
Type: fix
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: Ia379f3b686599532dedaafad2278c4097a3f03f3
|
|
CID #220403 ~ 220406
Type: fix
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: Ibb65f9f2b17b9a9d45c077933b033ca3a65ae42f
|
|
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: Id3ad783a7b0321a8fa37b4e606c0c4551ca4edd4
|
|
Add option to use per app private segments for app to vpp message
queues, as opposed to exposing internal message queues segment.
When so configured, internal message queues are still polled by the
session queue node but external app message queues are handled by a new
input node (appsl-rx-mqs-input) that runs in interrupt state. Signaling
of the node, when mqs receive new messages, is done through eventfds
epolled by worker epoll input nodes.
Type: feature
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Iffe8ce5a9944a56a14e6d0f492a850cb9e392d16
|
|
Type: fix
Signed-off-by: yedongggang <yedg@wangsu.com>
Change-Id: I5ec690e71fa9119a7bf1cfcb6e36263aa732eff0
|
|
- Refactor make test code to be co-located with
the vpp feature source code
Type: test
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: I66379dfe671628e39dfc9685c4fd70fa0e566f6f
|
|
If configure listen port more than 1 with epoll in nginx, only first
listen port can be registered successed in nginx worker process.
Type: fix
Signed-off-by: nandfan <fanyufei521@outlook.com>
Change-Id: Iec2e058ee972a2cd5b2d1d7d20d373dc17084ce1
|
|
Type: improvement
Change-Id: I1152e58d7bfcb3c4347147f87a834d45ad51cdfe
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: refactor
Change-Id: I8b273bc3bf16aa360f031f1b2692f766e5fc4613
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
Change-Id: I73383eb15186021cd6527d112da8443a0082f129
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
Change-Id: If3da7d4338470912f37ff1794620418d928fb77f
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
- Refactor make test code to be co-located with
the vpp plugin source code
Type: test
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: I09d55301665449b3f183191537749435f806fb15
|
|
This patch enables ip4, ip6, ip6-n-tuple, l2tpv3 esp ah flows in avf plugin
Type: improvement
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: I92c6d4217a6cce4085ee83e8beb4b037c8d7da5f
|
|
Type: improvement
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: I24fa52fee88dabad8f0b84446f796ee055819617
|
|
This patch adds the flow support to VPP avf_plugin.
Currently only IP4-N-TUPLE and GTPU flow are supported as
a reference. More flows will be added later.
Type: feature
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: I563dbfacecd3eba31e8c3c7769142ea6adba54b6
|
|
Type: refactor
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I9488ad7e045c908b60b5821d9c48583f6d513c2f
|
|
Sending the bogus acl_add_replace message with count=~0 will result in
an overflow of "expected_len" field which is a u32, thus the message
will pass the validation when it should not.
Solution - make the expected_len a u64 to avoid overflow.
The bug was found while experimenting with libfuzzer as part of
https://gerrit.fd.io/r/c/vpp/+/31763
Type: fix
Change-Id: I4a866d48f2418148236f1b1d77c487b869c7c43d
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
1. When producer invokes svm_msg_q_wait() in svm_msg_q_lock_and_alloc_msg_w_ring(), queue mutex is held by itself.
2. Sometimes, svm msg queue is not full and ring is full, svm_msg_q_wait() do nothing with mutex held, consumer will blocking at svm_msg_q_send_signal().
Type: fix
Signed-off-by: nandfan <fanyufei521@outlook.com>
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ib90b87ab76534cd42e9a4c3e11703e80d93ca678
|
|
Type: fix
Change-Id: I068bfeaf22b9e6cce967c27acdd46d4b8541bdf8
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Change-Id: I17228bd35cc7aa0d207a16502bf1376c75675302
Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
Type: fix
|
|
Type: fix
Change-Id: I392d348b1a38affac8761b0614b117cd991958d7
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
This patch introduces a 'program flow' virtchannel event.
The parameter is_add is used to identify adding or deleting the rule from avf
Type: improvement
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: I1f5545ddc23e4494a25afa36ff601607405a8c3d
|
|
- Refactor make test code to be co-located with
the vpp feature source code
Type: test
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: Iceaeab769c08e541b31546663d0e402ced862e5b
|
|
Type: fix
Change-Id: I84d511c30eb5878a1867f5e9d2207a39d4f0926c
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Avoid erroneous double vnet_feature_next if routing buffer manually.
Type: fix
Change-Id: I3f56c12bf57f59a1e5ddad63a2565fa195934cf6
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Make test-checkstyle-diff is a new target which checks PEP8 compliance
only for changed files. This makes it faster to execute and also more
readable as most of the time, only changed files will fail.
Type: improvement
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: I71baca76ab3a21a7a3790617cbfb0d48aacbd9ec
|
|
This module implement Python access to the VPP statistics segment. It
accesses the data structures directly in shared memory.
VPP uses optimistic locking, so data structures may change underneath
us while we are reading. Data is copied out and it's important to
spend as little time as possible "holding the lock".
Counters are stored in VPP as a two dimensional array.
Index by thread and index (typically sw_if_index).
Simple counters count only packets, Combined counters count packets
and octets.
Counters can be accessed in either dimension.
stat['/if/rx'] - returns 2D lists
stat['/if/rx'][0] - returns counters for all interfaces for thread 0
stat['/if/rx'][0][1] - returns counter for interface 1 on thread 0
stat['/if/rx'][0][1]['packets'] - returns the packet counter
for interface 1 on thread 0
stat['/if/rx'][:, 1] - returns the counters for interface 1 on all threads
stat['/if/rx'][:, 1].packets() - returns the packet counters for
interface 1 on all threads
stat['/if/rx'][:, 1].sum_packets() - returns the sum of packet counters for
interface 1 on all threads
stat['/if/rx-miss'][:, 1].sum() - returns the sum of packet counters for
interface 1 on all threads for simple counters
Type: refactor
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I1fe7f7c7d11378d06be8276db5e1900ecdb8f515
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
- Required to relocate test infra modules
to be co-located in feature test directory.
- Remove/regenerate build-root/build-test/src/
soft links when running make test to allow
re-running 'make test' after moving source files.
- Suppress annoying 'ls' error message when gathering
test source files caused by 'c' test application
directory being named 'test'.
- Use PYTHONPYCACHEPREFIX to generate all
compiled source under build-root/build-test.
This only works for python 3.8 or greater, but
existing 'make test-wipe' target cleans up
in-situ __pycache__ directories for older
python versions.
Type: fix
Change-Id: If3c3ff0c58fb26a17395babc34783e06b1dd84e7
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I35b5ae5a58ab38cc4328f9f438938fab4fbd7942
|
|
Type: improvement
Change-Id: If3b44682e5bbf68b83adc12fb6c71899aecf8a98
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
Change-Id: I56dadb852f63da0597ddf4db395a22afdf2d9cc0
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
This extra allows to mount a FUSE filesystem reflecting
the state of the stats segment.
Type: feature
Signed-off-by: Arthur de Kerhor <arthurdekerhor@gmail.com>
Change-Id: I692f9ca5a65c1123b3cf28c761455eec36049791
|
|
Type: improvement
Change-Id: I58a7d75da2db0ec84c7c1f08fd1ca7a72946f14d
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
Change-Id: I356b1b1804a2b09b25f5a285ada12db6879e2f6a
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Don't switch nodes from interrupt to polling state unless adaptive mode
flag set. For starters, flag set only on interface input nodes
with no polling rx queue and at least one in adaptive mode.
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ica1c75f605ead82b7cf74c45c6a774461008f054
|