Age | Commit message (Collapse) | Author | Files | Lines |
|
While setting an ACL, a user can specify the adjacency to follow after
the input ACL node. Thus, we may skip a lookup and enter directly a
local node (ex: ip4_local). To prevent the local source check from
failing, we need to specify the fib index. And, we have to do it just
before exiting the input ACL node because the l2_classify object
is overlapping with the fib_index in the vnet_buffer_opaque_t struct.
We could have added a padding to avoid this overlap but there is no
place for that in the structure.
Type: fix
Signed-off-by: Arthur de Kerhor <arthurdekerhor@gmail.com>
Change-Id: I383c36e4aec08d181f966f28565aefed950d2a74
|
|
Type: feature
This patch bumps ipsecmb library version from 1.1 to 1.2
Signed-off-by: Marcel Cornu <marcel.d.cornu@intel.com>
Change-Id: I181e43c711fe530296c037d59b53fe3c5f2719ea
|
|
Type: improvement
Currently, when an interface is brought down administratively, IPv4
routes that resolve through that interface remain in the FIB. However,
the kernel removes those routes but doesn't send any notifications about
that. Desynchronization between the kernel and VPP happens.
With this change, when a notification received from the kernel
indicating that an interface was brought down, in addition to bringing
the VPP interface down, walk the IPv4 FIB bound to that interface and
remove any entries that resolve through that interface and were added
with one of the linux-cp FIB sources.
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: I0cd14bb63c9e6616ae1c5739b17c3bf33b186bc2
|
|
Type: fix
- IPv6 fragmentation did not work if the packet spaneed multiple buffers, because the 'len' calculation to did max out at the size of a buffer
- IPv6 fragmentation did not work when the l2unfragmentable size was non-zero, it was not used in the correct places
- IPv6oMPLS fragmentation would fragment all IPv6, it should do so only for link local
- IPv6oMPLS should send back TooBig ICMP6 for non locally generated
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: Ie8f02cdfdd7b7e8474e62b6d0acda8f20c371184
|
|
Type: fix
Primarily fix an issue reported by Coverity in
lcp_nl_open_sync_socket() that close() could possibly be run with
negative fd. Also, add more checks and error logging there.
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: I9a88520d068392977a6eba0766451e5652fe512c
|
|
Type: improvement
Currently, read event signal is sent on every notification message
received and added in the queue.
With this change, signal read event only when all currently available
notification messages are received.
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: Ib86d189311ce01f50167e4e97feb99df0292ad96
|
|
Type: improvement
Currently, while reading notifications, ENOBUFS error is ignored and
reading continues. This was done to minimize the number of notifications
that are lost due to reopening the socket.
Now that synchronization is implemented to recover from socket errors,
ignoring ENOBUFS and reading as much notifications as possible is not
actual. Before synchronization, all currently enqueued notification are
discarded in any case.
With this change, stop reading notifications if any error occurs.
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: I1184d9a3aa99df63ef59bc2a67be2b1e5e0e9329
|
|
- make sure we do not overflow
- skip unknown messages if we can
Type: fix
Change-Id: I0efbe7376d9d78f6b0ec8018c0813400e6653698
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
if original packet was to the link local, then the
fib index in the buffer is that of the LL table, we can't use that
to foward the response if the new destination
is global, so reset to the fib index of the link.
In other case, the fib index we need has been written
to the buffer already.
Add a test for IPv6 ping in an MPLS-VPN where int inout interface is
not the the same VRF as the response should be sent.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I18a232d90ddd3ef051a52476c5d861c87060e76f
|
|
Type: improvement
For error conditions, such as TTL expired, dest unreach, etc, Rate limit the sending of ICMP error messages.
The rate limiting is done based on src,dst IP address of the received packet.
the rate limit has been chosen, somewhat arbitrarily, to be 1e-3. This is the same limit as the ARP throttling.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I4a0b791cde8c941a9bf37de6aa5da56779d3cef4
|
|
Type: improvement
When dump of neighbors is requested, the replies will also include
neighbor entries for IPv6 multicast addresses:
GigabitEthernet0/8/0 S ff02::16 33:33:00:00:00:16
GigabitEthernet0/8/0 S ff02::1:ff76:7135 33:33:ff:76:71:35
GigabitEthernet0/8/0 S ff02::2 33:33:00:00:00:02
Such entries are not reported in netlink notification messages and
VPP is unlikely to use these.
With this change, ignore neighbor entries when the IP address is a
multicast address.
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: Ic712aa4904f1d559f31fd89ff4541268e2340f84
|
|
ip6_ext_hdr_chain_t->eh is IP6_EXT_HDR_MAX elements.
Type: fix
Change-Id: I28b8d610d8f5c0c520c8391c37b86e837655ab12
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
This patch removes the assert and it is unnecessary.
Because given variable is used for branch testing.
Change-Id: I64f57f909fcba205216296e86c1cde2a5dadbb45
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: improvement
Change-Id: I5dda196ab8f1b634fcac46acd5c57a6dd726759c
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: fix
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: I2b8b6a3b5a6df71e84ce2f15ef7117f390121c2f
|
|
Add the possibility to create masks and matches without l2 header in the
CLI when creating tables and entries. This is useful for tables working
on l3 and l4 only.
Type: improvement
Signed-off-by: Arthur de Kerhor <arthurdekerhor@gmail.com>
Change-Id: I7da9e47d810c0b4a0938e2cb3bc31aa69ace3649
|
|
Type: fix
the MTU needs to be adjusted to account for the label stack, since the size of fragments produced is stack+mtu.
these changes are to the use of the stack variable 'mtu'
most of the patch results from appeasing checkstyle.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I8d0e10cf52ca4dd8ecdc224ed6c54a13e4768fdd
|
|
Type: fix
it only display the first flag set
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I45cddbac0d4eed8bda10bf5e0f7c9db0faf183c5
|
|
Use system wall-clock time for packets timestamps instead of the time
since VPP started for pcap traces.
Type: improvement
Change-Id: I716165912efe8db3a8861d5c10597dc7629d2293
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I315ef0122ccb21ccfef117a58b1dc998127618ce
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I4fd7ae435514eb986543302c7e3e69e04acba8cf
|
|
Type: improvement
During synchronization, only the current actual set of entries is
loaded. If some entries are no longer present in the set being loaded
but present in VPP, they should be removed to fully syncronize.
With this change, add handlers for sync begin and end events. Begin
handlers will mark the entries as stale. End handlers will remove the
entries that are still marked as stale.
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: I4f7e872af3e1c9ffa6c63bcc3984ec76def1bb43
|
|
An updated ipsec script was identical to the existing ipsec_tun_protect script.
Remove the ipsec vnet script, and rename the ipsec_tun_protect to become the
default ipsec vnet script.
Type: fix
Signed-off-by: Ray Kinsella <mdr@ashroe.eu>
Change-Id: Ie05ca3e089b67a5b9499d83d4cb2adf1b6c6ffba
|
|
Type: improvement
Currently, if an error happens on the netlink notification socket, the
socket gets reopened. A portion of notification messages have been lost
because of this and will never arrive on the socket. VPP will be out of
sync with the kernel networking state.
With this change, synchronize VPP state and the kernel networking state
if there was an error polling or reading the notification socket.
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: I8cdff89b505cd227535a0acaadb6ee757204c45e
|
|
Type: refactor
check for pool expansion in the DPO allocation, just in case.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I6ba7dd66313630d3f24a51700ab4486ba43d856b
|
|
Type: improvement
For some message types, timestamps are checked on netlink message to
decide whether the message should be applied. For notification messages
timestamps are expected to be always available.
With this change, before accessing the timestamp, make sure the message
info object that carries it is not null. If it is null, pass the check.
This is to be ready to process dump replies that will not need the
timestamp check and will have the message info object set to null.
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: Ic7211c0d451d72f6a5248898b3a8f8e0bca8f7aa
|
|
Type: fix
Currently, a tap interface created to be a member of a linux-cp pair has
default link state (down) and default link speed (10Mb/s). Then the
plugin monitors the link state of the paired hardware interface and if
it changes, the new link state is reflected on the tap interface. And
when the new link state is "up", the link speed is also reflected on the
tap interface.
The problem is that this scheme implies that the hardware interface's
link state is "down" at the moment of the linux-cp pair creation and
then changes. But there are cases when the link state is already "up" at
that moment. If that is the case, the link speed on the tap interface
will remain the default one until the link comes down and then comes up.
With this fix, when a linux-cp pair is created, reflect current link
state of the hardware interface being paired on the created tap
interface.
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: I73664d753f4daaa6d439c9ca898fb7363d21c06d
|
|
Some possible side effects for multicast routes appears to be in
lcp_router_table_add_or_lock. so ff00/8 route will be processed
for ospf purposes the right way
Ignore IPv6 kernel routes
Skip adding auto routes into FIB
Type: fix
Signed-off-by: Vladimir Ratnikov <vratnikov@netgate.com>
Change-Id: I35f73d629a7fffca7f7d4547adc2549b72c2048f
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I0982f0f5c8186f9ed962db49a14f35aa19f6a276
|
|
Include the user_instance in wireguard interface details.
In addition to dumping all wireguard interface details,
also allow selective dumping of just one interface.
Type: improvement
Signed-off-by: Jon Loeliger <jdl@netgate.com>
Change-Id: Iaf1093c6ae3eb00a685f34b2e0171285b02fae2b
|
|
Type: fix
Fixes: 1cd0e5dd533f4209dde453eaa43215e52cd42985
Change-Id: I64318585fb3b12369b78735c681f3b747c67b53b
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
When building a VPP library out of tree using add_vpp_library, the build
sometimes fails because the library API files are not necessarily
generated before compiling this library.
This is fixed by adding the lib API files as dependencies of the
lib compilation.
Type: fix
Signed-off-by: Guillaume Solignac <gsoligna@cisco.com>
Change-Id: I69dffaecbfd547f10115504494a47358c4624258
|
|
Useful for stress testing.
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I0b1701682494a9fbf7deac311b4afd3036c50b56
|
|
Type: refactor
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: I3788cc857023fafcc8eb6d6ff4524425026a75d8
|
|
- cli_inband is missing from vat2
Type: improvement
Change-Id: I1f22dee3ee29f3cf0f1f7c6076d5f2b2b2bf969d
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: If5eed7dac4951f0510a4b4b092f66f44d0d3cacd
|
|
Type: fix
Signed-off-by: Saravanan Murugesan <sarmurug@cisco.com>
Change-Id: Icfd5e3c0bb034684c7bc43be46927294536ba08a
|
|
Type: fix
Signed-off-by: Saravanan Murugesan <sarmurug@cisco.com>
Change-Id: I5f7f4b925b3d250c5b8616d1fb35edbde50a7a23
|
|
type: docs
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: I32291160f0d22a804929d0a040472ff952f02544
Signed-off-by: Maciek Konstantynowicz <mkonstan@cisco.com>
(cherry picked from commit 7911f29c518c6b2a678e13874f7f16eba03dab75)
|
|
- A call to vapi_msg_control_ping_hton() is generated in
a static inline function in vlib.api.vapi.h, which is
defined/generated in memclnt.api.vapi.h without
including memclnt.api.vapi.h in vlib.api.vapi.h.
This breaks the compilation of plugins which include
only vlib.api.vapi.h (e.g. hicn_plugin from the HICN
project).
Type: fix
Fixes: a1400cecb
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: I5574f4ed496183ea93265f493bf3624254a865a2
|
|
The app keeps on using the default app ns but each listen will be done
in the vrf configured.
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I0947e03188d55231b299916351115038e0b1f5da
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ibe92497cc5446ac5c734f8fe5c63c0167204dd09
|
|
This fixes an issue caused by session layer reading expected part of
data (cert + key) before the client actually sends it.
Type: fix
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Change-Id: I6ddddb08f9576211b302e814d7c2b040383e5fb7
|
|
Raise a new UnexpectedPacketErrror, when a packet is captured
unexpectedly. This pretty-prints a terse description of said packet.
Type: improvement
Signed-off-by: Klement Sekera <klement.sekera@gmail.com>
Change-Id: Ibac19fc5bbd82a150fec3c90940a37af6344fd4f
|
|
- HICN project's hicn_plugin requires vnet header files
fib/fib_entry_track.h and udp/udp_encap.h to be
included in build-root/install-vpp*-*/vpp/include/vnet
Type: fix
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: Iabd3f8fe0aee8d727758fc6ef202e859d68d63a3
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I925618e426b325f4fafb9ed39a2d7c2d7c7b38f3
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I37ff8099c6c8044881379b4cd47ca8843746c315
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ie89326ed4e599231fc20de67c5dadbb428568bec
|
|
Type: fix
Fixed coverity-issue CID 248517.
Originally possible passing null pointer to one function and directly
dereferences it.
This patch fixes the issue by add a new condition to check this
pointer.
Change-Id: If506abaf08c9f003860b641971af291f68613c18
Signed-off-by: Gabriel Oginski <gabrielx.oginski@intel.com>
|
|
Type: fix
Fixes: 39e9428b90bc
When a VRRP advertisement is received by a worker thread, the worker
calls vl_api_rpc_call_main_thread() so the main thread will process the
packet and make adjustments to VR state if necessary.
The data being passed to the main thread included a pointer to the VRRP
header in the received packet buffer. Since the main thread processes
the RPC request asynchronously from the worker thread, it's possible for
the worker to drop the packet and for the buffer to be overwritten before
the main thread can process it.
Copy the fields which may be needed by the main thread into a struct
instead of passing a pointer to a packet buffer.
Change-Id: I4e899e967df5a54776b521825a80e9cce1a94f5f
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|