Age | Commit message (Collapse) | Author | Files | Lines |
|
cxgbe PMD initializes its control channel as part of dev_configure(),
and trying to get link status prior to it will lead to a crash.
DPDK documentation loosely hints that we should not call any device
function before dev_start(), call link_state() only for the relevant
PMDs.
From DPDK API documentation:
The functions exported by the application Ethernet API to setup a device
designated by its port identifier must be invoked in the following
order:
rte_eth_dev_configure()
rte_eth_tx_queue_setup()
rte_eth_rx_queue_setup()
rte_eth_dev_start()
Then, the network application can invoke, in any order, the functions
exported by the Ethernet API to get the MAC address of a given device,
to get the speed and the status of a device physical link, to
receive/transmit [burst of] packets, and so on.
Type: fix
Change-Id: I12d2ab4d84e6bd72a9f695447e86f3222929c804
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
Signed-off-by: Mrityunjay Kumar <kumarnitp@gmail.com>
Change-Id: I31cc5e853b57e285064647503231b251e5152d3f
|
|
Type: improvement
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: I95286d6723fd1860bf6bb0e81c474d732ab25121
|
|
By storing thread and session index in hash table we are able to skip
multiple hash lookups in multi-worker scenario, which were used for
handoff before. Also, by storing sesion index in vnet_buffer2, we can
avoid repeating the lookup after handoff.
Type: improvement
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: I406fb12f4e2dd8f4a5ca5d83d59dbc37e1af9abf
|
|
Type: fix
Change-Id: Ife726d2f6baaa3516c209011183f39670cf6a55d
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
|
|
Type: fix
Signed-off-by: Ye donggang <yedg@wangsu.com>
Change-Id: Ia9f72ff2be455ecd4ff3d16e884c5a50f9df69fe
|
|
Change-Id: Ib9ff4e2e3bea2085834294fd2a0beb3c559c459f
Type:docs
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Calling ethernet_set_flags() to switch interface to/from promiscuous
mode must use use hw_if_index instead of sw_if_index.
Type: fix
Signed-off-by: John Lo <loj@cisco.com>
Change-Id: I72da286b913893227e32193ee11fbbc56e04804d
|
|
Type: fix
... it's not a feature anymore
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: Ifbcaf7d832aa76336feb0556d0dc7d2002f19c35
|
|
Type: fix
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: I2a70db3a25450e014adaed84989f4da9bb77b14d
|
|
This fixes a situation where long-lived inactive session blocks LRU
list. Solution is to have multiple LRU lists based on session type.
This helps because session timeout is same for all sessions of same
type.
Type: fix
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: I5e54b2aab73b23911d6518d42e8c3f166c69a38c
|
|
Use a lookup table instead.
Type: improvement
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: Ia8461099828bb8824bf016201f135e6b69c444d1
|
|
After VF reset, FDIR rule still takes effect. To solve the issue,
this patch adds to flush all flows before flow uninit. VIRTCHNL
sends message to PF by Admin Queue, so flow flush should be implemented
before Admin Queue shut down.
Type: fix
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: I8ba0db7cd7646eaabd5745f74952016b0b968bbb
|
|
Type: fix
In quad loop, checksum will be calculated for all four packets,
if one packet needs checksum computation, without respecting their
respective flags. This patch fixes it.
Change-Id: I479b420ba0dcbd178ea4180bf05a0e55a6b13843
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: fix
it is possible for a user to change the end node of a feature arc, but
this change should only apply to that 'instnace' of the arc, not all
arcs. for example, if a tunnel has its ipx-output end node changed to
adj-midchain-tx, this shouldn't affect all ipx-output arcs. obviously...
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I41daea7ba6907963e42140307d065c8bcfdcb585
|
|
Type: fix
Only add GSO and Checksum offload flags when gso is
enabled.
Change-Id: I58945a4ffbb9a0e6a8640fc01424c63feef16306
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: feature
the es4-encrypt and esp6-encrypt nodes need to be siblings so they both have the same edges for the DPO on which the tunnel mode SA stacks.
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I2126589135a1df6c95ee14503dfde9ff406df60a
|
|
Type: fix
Change-Id: I14e323e7bb1db7a3d40668212535c07504374e59
Signed-off-by: Filip Varga <fivarga@cisco.com>
|
|
Type: fix
Change-Id: Idf9b0ffb4e3a0113bece80d1195192bdf46feb89
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Type: fix
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I7708587804bc979fa9c46fb11f96d264821e2357
|
|
Type: fix
Avoids issues if thread with non-zero __os_thread_index attaches to
binary api.
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ib981f12c867fdee7590391ec43128145bb1abce6
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: If3372e3edd403240c2c9da746246170549a3e644
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I84ec1c91a3a7b2195aad58923fa6f17f551444cb
|
|
Fix a couple endian conversions for displaying Marker Protocol packet
in the trace
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I746a67fb6143b5ad52bc4af9604ff8760dbdec9b
|
|
Avoids crash due to missing symbol, when build system detects toolchain
which is not able to produce binaries for all targets we need....
Type: fix
Change-Id: I77ee63cb8dca3c9e4e83a6235c60f1439a472444
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ie35dc623394cfb6c358740361fd85aa0924ab187
|
|
Fix the issue that vppctl show ip4{6} neighbor [interface] command can't
show entries correctly, example: both ip4 and ip6 entries can be shown
with command:
vppctl show ip4 neighbor.
Type: fix
Signed-off-by: Michael Yu <michael.a.yu@nokia-sbell.com>
Change-Id: I229368b71cd285adce994c8290cc9d7e4c4f5aa6
Signed-off-by: Michael Yu <michael.a.yu@nokia-sbell.com>
|
|
Type: fix
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Change-Id: I617fb365def22a28d48f75013dea38f8e1703a44
|
|
crcchecker is a tool for enforcement of the binary API.
1. Production APIs should never change.
2. An API can be deprecated across three release cycles.
Release 1: API is marked as deprecated.
option deprecated="vyy.mm";
option replaced_by="new_api_2";
Release 2: both old and new APIs are supported
Release 3: the deprecated API is deleted.
3. APIs that are experimental / not released are not checked.
An API message can be individually marked as in progress, by:
option status="in_progress";
In the API definition.
The definition of a "production API" is if the major version in the API file is > 0.
extras/scripts/crcchecker.py --check-patchset # returns -1 if backwards incompatible
extras/scripts/crcchecker.py --dump-manifest
extras/scripts/crcchecker.py --git-revision v20.01 <files>
extras/scripts/crcchecker.py -- diff <oldfile> <newfile>
This patch integrates the tool in "make checkstyle-api".
A future patch is required to integrate the tool in the verify job.
I.e. this patch does not enable enforcement through Jenkins.
Change-Id: I5f13c0976d8a12a58131b3e270f2dc9c00dc7d8c
Type: feature
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Fix coverity issue #210194 in gtpu-decap
Type: fix
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: I5b172c8494527e7117c4e7e7083a8473165aa40f
|
|
Although attempts to build code containing merge conflict markers
USUALLY results in compile errors, this patch adds an explicit check
for the conflict end marker.
If for some unknown reason it's necessary to check in the text
'>>>>>>>', construct it by concatenation: ">>>"">>>>"
or '>>>' + '>>>>' depending on the language involved.
Type: improvement
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: Iaad2aa8b87a71137a3bb9a09f7f4159909bf79ab
|
|
Type: fix
Fixes: b5a575b09
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: I22d35159a923075243df9760f1a74e2ca74e30e1
|
|
While https://gerrit.fd.io/r/c/vpp/+/26948 fixed avoid using -1 to
index into h->free_lists[b][l] by changing the loop counter, the
check for the value of the loop counter (l < 0) cannot be trusted
to decide whether we've found a large enough object within the bin
or not. When the loop is terminated, the value of the variable l
could be ambiguous if it equals to 0 and it is never less than 0,
ie, when we bail out of the loop, we don't know if it was due to the
breaking out of the condition in
if ((s = f_size - size) >= 0)
break;
or
while (l > 0);
The fix is to explicitly set a variable when we have found a large enough
object inside the loop to be used to test whether the loop was prematurely
terminated (found == 1) or the loop just ran exhausted (found == 0)
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I0161813fbd44dcba8982a767eac2e0930e9d77e3
|
|
Used for lanuguage servers like clangd and ccls
Type: improvement
Change-Id: I68d534dfa7b8ba3459fbd919d5ffccaa1fa1171e
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
- add option to install only host tools
- add option to specify lib and runtime dir
Type: improvement
Change-Id: I6356b52df459120fc9b0127948bae7679fb10e52
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
Ticket: VPP-1837
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I20daa023eed50f8b42e8dc2d17e47a54aa16ae31
|
|
Breaks on Ubuntu 20.04 otherwise.
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I407215a03948d6e49152ee97099539bb625c12ef
|
|
The original fix access vlib_main before these was initialized.
Removed cached vlib_mains structure.
Type: fix
Fixes: 9bb09afb56b1aa787ca574cc732085272059fd5f
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I686bab9220e27891f66bf60489c1602855786aa8
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
When building vpp image with below command, clang reports warnings/errors
on the unused option '-L', as it's not linking stage, and does not require
linking libraries.
In dpdk.mk, the linking library path should be attached to
DPDK_EXTRA_LDFLAGS, instead of DPDK_EXTRA_CFLAGS
$ make build-release CC=clang V=1
clang -Wp,-MD,./.ark_ddm.o.d.tmp -fPIE -fPIC -pthread -I/root/origin/build-root/build-vpp-native/external/dpdk-20.02/lib/librte_eal/linux/eal/include -march=armv8-a+crc -DRTE_MACHINE_CPUFLAG_NEON -DRTE_MACHINE_CPUFLAG_CRC32 -I/root/origin/build-root/build-vpp-native/external/dpdk-20.02/arm64-armv8a-linuxapp-clang/include -DRTE_USE_FUNCTION_VERSIONING -include /root/origin/build-root/build-vpp-native/external/dpdk-20.02/arm64-armv8a-linuxapp-clang/include/rte_config.h
-D_GNU_SOURCE -O3 -I./ -W -Wall -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wold-style-definition -Wpointer-arith -Wnested-externs -Wcast-qual -Wformat-nonliteral -Wformat-security -Wundef -Wwrite-strings -Wdeprecated -Wno-missing-field-initializers -Wno-address-of-packed-member -Werror -g -mtune=generic -L/root/origin/build-root/install-vpp-native/external/lib -I/root/origin/build-root/install-vpp-native/external/include -o ark_ddm.o -c
/root/origin/build-root/build-vpp-native/external/dpdk-20.02/drivers/net/ark/ark_ddm.c
== Build drivers/vdpa/ifc
clang: warning: argument unused during compilation: '-L/root/origin/build-root/install-vpp-native/external/lib' [-Wunused-command-line-argument]
clang: error: argument unused during compilation: '-L/root/origin/build-root/install-vpp-native/external/lib' [-Werror,-Wunused-command-line-argument]
Type: fix
Change-Id: If8fd9b19d0aff9d3c27d77e78cd3064bb1ad6565
Signed-off-by: Lijian Zhang <Lijian.Zhang@arm.com>
Reviewed-by: Jieqiang Wang <Jieqiang.Wang@arm.com>
Reviewed-by: Govindarajan Mohandoss <Govindarajan.Mohandoss@arm.com>
|
|
Fix the endianness conversion function u32x4_byte_swap() on Arm. Here's
an example of using this function with and without the fix.
This issue is seen using Mellanox NIC RDMA driver on Arm servers.
The packet length cannot be parsed correctly.
Testing code:
u32x4 s = {0x12345678, 0x23456789, 0x3456789a, 0x456789ab};
u32x4 ss = u32x4_byte_swap (s);
Without the code change:
(gdb) p /x s
$1 = {0x12345678, 0x23456789, 0x3456789a, 0x456789ab}
(gdb) p /x ss
$2 = {0x23456789, 0x12345678, 0x456789ab, 0x3456789a}
With the code change:
(gdb) p /x s
$3 = {0x12345678, 0x23456789, 0x3456789a, 0x456789ab}
(gdb) p /x ss
$4 = {0x78563412, 0x89674523, 0x9a785634, 0xab896745}
Type: fix
Change-Id: Ie5f263e94331783940e7c00397092a64e4fc4279
Signed-off-by: Lijian Zhang <Lijian.Zhang@arm.com>
Reviewed-by: Jieqiang Wang <Jieqiang.Wang@arm.com>
Reviewed-by: Govindarajan Mohandoss <Govindarajan.Mohandoss@arm.com>
|
|
In search_free_list(), we have this do while loop.
do
{
l--;
f_index = h->free_lists[b][l];
f = elt_at (h, f_index);
f_size = heap_elt_size (v, f);
if ((s = f_size - size) >= 0)
break;
}
while (l >= 0);
When (l == 0), we still go back up to execute l--. Then l become -1. The
next statement is we index h->free_lists[b][-1]. After that, elt_at() would
probably cause a crash in the ASSERT.
Type: fix
Ticket: VPPSUPP-63
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I617d122aa221cfdfe38f8be50f4e0f0e76e11bb5
|
|
Type: fix
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: I3c914d5c457df40205280ac589a2d353261343d5
|
|
Type: fix
Change-Id: If6784c9eb278f525e05304d10fd1a00641faaaf0
Signed-off-by: Filip Varga <fivarga@cisco.com>
|
|
Type: make
Change-Id: I34fec1c40ef660177c266517eaf41d60827609f4
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I4ac923fda84feee8d2ad76d0c3e3a252f53008ed
|
|
Use thread-specific vlib_main_t *vm pointers to avoid problems with
different threads accessing the same vlib_main_t data structure.
This avoids assertion failure when vlib_time_now() is called with a vm
corresponding to a different thread.
Type: fix
Signed-off-by: Elias Rudberg <elias.rudberg@bahnhof.net>
Change-Id: I359596ecff86e03d57aa8d2330f77bf9a913485f
|
|
Type: fix
Change-Id: I0ff7a6f3354066c2252c1ebd0d43ac59db278bf0
Signed-off-by: Damjan Marion <damarion@cisco.com>
Signed-off-by: Elias Rudberg <elias.rudberg@bahnhof.net>
|
|
Type: docs
Change-Id: I9b5e5137eb4c1e89f6e8d7a278cd11a0fd496471
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: docs
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: Id0576d98b8e78cf4cd00161968d3eb6dbd58055a
|
|
Fix coverity issues in crypto framework and cryptodev
engine.
Type: fix
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Change-Id: Ib261da0163c8182c803600db22c5a6dad5a19999
|