aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2022-07-15ipsec: fast path outbound policy matching implementation for ipv6Piotr Bronowski8-171/+227
With this patch fast path for ipv6 policy lookup is enabled. This impelentation scales and outperforms original implementation when the number of defined flows is higher thatn 100k. Type: feature Signed-off-by: Piotr Bronowski <piotrx.bronowski@intel.com> Change-Id: I9364b5b8db4fc708790d48c538add272c7cea400
2022-07-12quic: fix coverity warningFlorin Coras1-1/+2
Type: fix Fixes: 5b4b4c0 Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: If4bd8f30cd23d862109cab665251ad89804b1734
2022-07-12perfmon: add Arm event bundlesZachary Leaf9-0/+874
Included statistic bundles (all NODE type): - Instructions and CPU cycles, including IPC - Data cache access/refills/% - Data TLB cache access/refills/% - Instruction cache access/refills/% - Instruction TLB cache access/refills/% - Memory/Bus accesses, memory errors - Branch (mis)predictions, architecturally & speculatively executed - Processor frontend/backend stalls (stalled cycles) Type: feature Signed-off-by: Zachary Leaf <zachary.leaf@arm.com> Tested-by: Jieqiang Wang <jieqiang.wang@arm.com> Change-Id: I7ea4a27c8df8fc7222b743a98bdceaff727e4112
2022-07-12perfmon: enable perfmon plugin for ArmZachary Leaf13-37/+659
This patch enables statistics from the Arm PMUv3 through the perfmon plugin. In comparison to using the Linux "perf" tool, it allows obtaining direct, per node level statistics (rather than per thread). By accessing the PMU counter registers directly from userspace, we can avoid the overhead of using a read() system call and get more accurate and fine grained statistics about the running of individual nodes. A demo of perfmon on Arm can be found at: https://asciinema.org/a/egVNN1OF7JEKHYmfl5bpDYxfF *Important Note* Perfmon on Arm is dependent on and works only on Linux kernel versions of v5.17+ as this is when userspace access to Arm perf counters was included. On most Arm systems, a maximum of 7 PMU events can be configured at once - (6x PMU events + 1x CPU_CYCLE counter). If some perf counters are in use elsewhere by other applications, and there are insufficient counters remaining to open the bundle, the perf_event_open call will fail (provided the events are grouped with the group_fd param, which perfmon currently utilises). See arm/events.h for a list of PMUv3 events available, although it is implementation defined whether most events are implemented or not. Only a small set of 7 events is required to be implemented in Armv8.0, with some additional events required in later versions. As such, depending on the implementation, some statistics may not be available. See Arm Architecture Reference Manual for Armv8-A, D7.10.2 "The PMU event number space and common events" for more information. arm/events.c:arm_init() gets information from the sysfs about what events are implemented on a particular CPU at runtime. Arm's implementation of the perfmon source callback .bundle_support uses this information to disable unsupported events in a bundle, or in the case no events are supported, disable the entire bundle. Where a particular event in a bundle is not implemented, the statistic for that event is shown as '-' in the 'show perfmon statistics' cli output, by disabling the column. There is additional code in perfmon.c to only open events which are marked as implemented. Since we're only opening and reading events that are implemented, some extra logic is required in cli.c to re-align either perfmon_node_stats_t or perfmon_reading_t with the column headings configured in each bundle, taking into account disabled columns. Userspace access to perf counters is disabled by default, and needs to be enabled with 'sudo sysctl kernel/perf_user_access=1'. There is a check built into the Arm event source init function (arm/events.c:arm_init) to check that userspace reading of perf counters is enabled in the /proc/sys/kernel/perf_user_access file. If the above file does not exist, it means the kernel version is unsupported. Users without a supported kernel will see a warning message, and no Arm bundles will be registered to use in perfmon. Enabling/using plugin: - include the following in startup.conf: - plugins { plugin perfmon_plugin.so { enable } - 'show perfmon bundle [verbose]' - show available statistics bundles - 'perfmon start bundle <bundle-name>' - enable and start logging - 'perfmon stop' - stop logging - 'show perfmon statistics' - show output For a general guide on using and understanding Arm PMUv3 events, see https://community.arm.com/arm-community-blogs/b/tools-software-ides-blog/posts/arm-neoverse-n1-performance-analysis-methodology Type: feature Signed-off-by: Zachary Leaf <zachary.leaf@arm.com> Tested-by: Jieqiang Wang <jieqiang.wang@arm.com> Change-Id: I0620fe5b1bbe78842dfb1d0b6a060bb99e777651
2022-07-12perfmon: make less arch dependentZachary Leaf8-101/+161
In preparation for enabling perfmon on Arm platforms, move some Intel /arch specific logic into the /intel directory and update the CMake to split the common code from arch specific files. Since the dispatch_wrapper code is very different on Arm/Intel, each arch can provide their own implementation + conduct any additional arch specific config e.g. on Intel, all indexes from the mmap pages are cached. The new method intel_config_dispatch_wrapper conducts this config and returns a pointer to the dispatch wrapper to use. Similarly, is_bundle_supported() looks very different on Arm/Intel, so each implementation is to provide their own arch specific checks. Two new callbacks/function ptrs are added in PERFMON_REGISTER_SOURCE to support this - .bundle_support and .config_dispatch_wrapper. Type: refactor Signed-off-by: Zachary Leaf <zachary.leaf@arm.com> Change-Id: Idd121ddcfd1cc80a57c949cecd64eb2db0ac8be3
2022-07-11wireguard: fix coverity warningsArtem Glazychev1-8/+8
Type: fix Signed-off-by: Artem Glazychev <artem.glazychev@xored.com> Change-Id: I62f13ee8cb9b86f8106505fd32a03d66c1a73bce
2022-07-08dpdk: add ID for 4xxx QAT VFMatthew Smith1-3/+5
Type: improvement Enable use of 4th gen QAT devices. Will be available on Sapphire Rapids. Signed-off-by: Matthew Smith <mgsmith@netgate.com> Change-Id: I89e7d29e10ecb4c36c700ff5e017796161ec6c5e
2022-07-06gre: fix returning the flags in the APIIvan Shvedunov1-0/+1
Type: fix Signed-off-by: Ivan Shvedunov <ivan4th@gmail.com> Change-Id: I5ecfb242e5905c9bd8ce19cd9ab6efd657ee14d4
2022-07-06vppinfra: fix memory leak in sparse_vec_free()Sergey Matov1-1/+4
Type: fix Signed-off-by: Ivan Shvedunov <ivan4th@gmail.com> Signed-off-by: Sergey Matov <sergey.matov@travelping.com> Change-Id: I4ec1a68b7266f05ab7c543cd8207afb29e740743
2022-07-06misc: pass NULL instead of 0 for pointer in variadic functionsAndreas Schultz5-18/+14
0 is not NULL (at least not in all cases), passing 0 into a variadic function in a place where the consumer reads it as pointer might leave parts of the pointer uninitilized and hence filled with random data. It seems that this used to work with gcc, but clang seems to treat the 0 in those places as a 32bit integer. Type: fix Signed-off-by: Ivan Shvedunov <ivan4th@gmail.com> Signed-off-by: Andreas Schultz <andreas.schultz@travelping.com> Change-Id: I37d975eef5a1ad98fbfb65ebe47d73458aafea00
2022-07-01buffers: protect against bad thread indicesJon Loeliger1-0/+3
There is a very rare bug in NAT processing that yeilds a thread index of ~0. When this happens, vlib_get_frame_queue_elt() suffers a segfault and VPP quits. Prevent an outright fault by dropping the packet instead. Type: fix Signed-off-by: Jon Loeliger <jdl@netgate.com> Change-Id: I48c7a268925bb821ea15e58db5d4bfb211c40c09
2022-06-30vcl: check if listener valid on disconnect cleanupFlorin Coras1-1/+2
Type: fix Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: Ie057d0d5a51d3226a1a188cf9d48a5d82dc4a3c7
2022-06-30misc: VPP 22.06 Release NotesAndrew Yourtchenko2-0/+606
Type: docs Change-Id: I15971b21fd660b4893218640c0d5e5a5247868f1 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com> (cherry picked from commit 0d352a97c5e3ad1f5f6eab18a978a14b0b9e06a8)
2022-06-30vrrp: while delete vr can't delete multi virtual address.GaoChX1-1/+4
Here is bug example: vpp# create loopback interface loop0 vpp# vrrp vr add loop0 vr_id 1 priority 100 192.168.1.1 192.168.1.2 vpp# vrrp vr del loop0 vr_id 1 vpp# vrrp vr add loop0 vr_id 1 priority 100 192.168.1.1 192.168.1.2 vrrp vr add: vrrp_vr_add_del returned -105 Type: fix Signed-off-by: GaoChX <chiso.gao@gmail.com> Change-Id: I3e0d086ac8fb52756339cff19b9a83911ec9748b
2022-06-30sr: SRv6 Path Tracing Sink node behaviorAhmed Abdelsalam1-0/+10
Type: feature Signed-off-by: Ahmed Abdelsalam <ahabdels@cisco.com> Change-Id: I2d3a0211abfee3501d3d77c80da20e67e1e9e133
2022-06-29vlib: enqueue_to_next_with_aux implementationMohammed Hawari4-37/+233
Change-Id: I0e1bb39d765ec3efa7b28ca02fb7beeb23607e51 Type: improvement Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
2022-06-29classify: use 32 bits hashBenoît Ganne11-55/+54
classify hash used to be stored as u64 in buffer metadata, use 32 bits instead: - on almost all our supported arch (x86 and arm64) we use crc32c intrinsics to compute the final hash: we really get a 32-bits hash - the hash itself is used to compute a 32-bits bucket index by masking upper bits: we always discard the higher 32-bits - this allows to increase the l2 classify buffer metadata padding such as it does not overlap with the ip fib_index metadata anymore. This overlap is an issue when using the 'set metadata' action in the ip ACL node which updates both fields Type: fix Change-Id: I5d35bdae97b96c3cae534e859b63950fb500ff50 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2022-06-29sr: code refactor and style fixAhmed Abdelsalam2-15/+14
Type: refactor Signed-off-by: Ahmed Abdelsalam <ahabdels@cisco.com> Change-Id: Iff5e85952273526d5c9d9e7e73bd2b6c15bcd7f6
2022-06-29svm: check svm_msg_q_size_to_alloc successOfer Heifetz1-0/+3
svm_msg_q_size_to_alloc must return a valid base address, if it fails pass up the error for handling Type: fix Change-Id: I408492f65f646862122acb9a187819b3bbf4f91c Signed-off-by: Ofer Heifetz <oferh@marvell.com>
2022-06-29sr: Add support for SRv6 Path Tracing InfrastructureAhmed Abdelsalam4-0/+350
This patch adds support for the infrastructure required to support SRv6 Path Tracing defined in https://datatracker.ietf.org/doc/draft-filsfils-spring-path-tracing/ Type: feature Change-Id: If3b09d6216490a60dd5a816577477b6399abc124 Signed-off-by: Ahmed Abdelsalam <ahabdels@cisco.com>
2022-06-29hsa: reduce number of preallocated vcl test server sessionsFlorin Coras2-1/+2
Type: improvement Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I7afc6116ca9a609992f26d9e78084732bba1b2ea
2022-06-29ipsec: add fast path python testsFan Zhang2-0/+782
This patch introduces set of python tests for fast path, based on flow cache tests. There was a bug in calculating of policy mask when adding to fast path, which has been fixed. Memory size for bihash tables for both ip4 and ip6 outbound fast path policies has been increased. Type: feature Signed-off-by: Piotr Bronowski <piotrx.bronowski@intel.com> Change-Id: Ibeee904ae7179f5dafbd45bb44282436f0b80821
2022-06-29tests: add ipsec flow performance unit testPiotr Bronowski1-0/+309
This patch adds performacne and functional tests for ip4 outbound traffic policy matching. Test setup is configurable in startup.conf and though the test parameters. Cache, fast path, fast path burst mode can be enabled and disabled, and performance for different lookup setup can be measured. Type: feature Signed-off-by: Piotr Bronowski <piotrx.bronowski@intel.com> Change-Id: I1d04d196e412f47f43b7e5cbd46607bf6a9cc40e
2022-06-29ipsec: show fast path flag in cliFan Zhang1-8/+27
This patch updates the "show ipsec spd" cli to display policies maintained by fast path bihash table. Type: feature Signed-off-by: Piotr Bronowski <piotrx.bronowski@intel.com> Change-Id: I58b9f92f3132dc9809b50786dc912e09c4b84d81
2022-06-29ipsec: add fast path configuration parserPiotr Bronowski1-2/+19
Parser can be configured from the level of startup.conf file: fast path can be enabled and disabled. Type: feature Signed-off-by: Piotr Bronowski <piotrx.bronowski@intel.com> Change-Id: Ifab83ddcb75bc44c8165e7fa87a1a56d047732a1
2022-06-29ipsec: add spd fast path matchingPiotr Bronowski3-0/+584
This patch adds matching functionality for spd fast path policy matching. Fast path matching has been introduced for outbound traffic only. Type: feature Signed-off-by: Piotr Bronowski <piotrx.bronowski@intel.com> Change-Id: I03d5edf7d7fbc03bf3e6edbe33cb15bc965f9d4e
2022-06-29ipsec: make match function inlinePiotr Bronowski2-145/+171
This patch introduces ipsec_output.h file. Matching implementation is moved there. The reason behind is the possibility of unit testing matching mechanism. Therefore we need to have functions that are in scope of our intrest there and since these are inline their implementation needs to be moved to the header file as well. Type: improvement Signed-off-by: Piotr Bronowski <piotrx.bronowski@intel.com> Change-Id: Id7c605375d1f3be146abf96ef70d336a5d156444
2022-06-29ipsec: add/delete ipsec fast path policyPiotr Bronowski6-59/+717
This patch introduces functions to add and delete fast path policies. Type: feature Signed-off-by: Piotr Bronowski <piotrx.bronowski@intel.com> Change-Id: I3f1f1323148080c9dac531fbe9fa33bad4efe814
2022-06-28session: fix connected udp acceptsFlorin Coras1-0/+1
Type: fix Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I0963bae4b56b08c0a9ab4ee1f2738013217e1fb7
2022-06-28session quic: allow custom config of rx mqs seg sizeFlorin Coras2-3/+6
Type: fix Signed-off-by: Florin Coras <fcoras@cisco.com> Signed-off-by: Dave Wallace <dwallacelf@gmail.com> Change-Id: Idc0fdebfea29c241d8a36128241ccec03eace5fd
2022-06-28docs: fix broken linksPratikshya Prasai1-11/+11
Type: docs Signed-off-by: Pratikshya Prasai <pratikshyaprasai2112@gmail.com> Change-Id: I729de9e18624c63a72ec415a05c55617cb360c47
2022-06-28ipsec: introduce spd fast path typesPiotr Bronowski1-0/+63
This patch introdcues basic types supporting fast path lookup. Fast path performs policy matching with use of hash lookup (particularly bihash tries has been used for that purpose). Fast path lookup addresses situation where huge number of policies is created (~100k or more). In such scenario adding/removing a policy and policy matching is not efficient and poorly scales (for example adding 500k policies takes a few hours. Also lookup time increases significantly). With fast path adding and matching up to 1M flows scales up linearly (adding 1M of policies takes about 150s on the test machine vs many hours in case of original implementation, also matching time is significantly improved). Fast path will not deal well with a huge number of policies that are spanning large ip/port ranges. Large range will be masked out almost entirely leaving only a few bits for calculating the hash key. Such keys will tend to gather much more policies than other keys and hash will match most of the packets anihilating advantages of hashing. Having said that we also think that it is not the real life scenario. Type: feature Signed-off-by: Piotr Bronowski <piotrx.bronowski@intel.com> Change-Id: I600dae5111a37768ed4b23aa18426e66bbf7b529
2022-06-28ipsec: change wildcard value for any protocol of spd policyPiotr Bronowski13-79/+321
Currently 0 has been used as the wildcard representing ANY type of protocol. However 0 is valid value of ip protocol (HOPOPT) and therefore it should not be used as a wildcard. Instead 255 is used which is guaranteed by IANA to be reserved and not used as a protocol id. Type: improvement Signed-off-by: Piotr Bronowski <piotrx.bronowski@intel.com> Change-Id: I2320bae6fe380cb999dc5a9187beb68fda2d31eb
2022-06-17quic:fix crash rx_fifo full or growfanxb1-0/+16
if when the rx_fifo grows, svm_fifo_enqueue() return -4, stream_data->app_rx_data_len += rlen type conversion occurs, Finally,stream->recvstate.data_off calculation is wrong. Type:fix Signed-off-by: fanxb <fxb_mail@163.com> Change-Id: Iae11f0c453f32d836f4148d70e3b121545a53a90
2022-06-15stats: fix prometheus exporter crash on large number of FIB entriesAlexander Chernavin1-2/+2
Type: fix Currently, prometheus exporter may crash because of memory exhaustion when dumps metrics if the FIB contains large number of routes. With this fix, increase memory size for prometheus exporter to be able to handle large number of FIB entries. Signed-off-by: Alexander Chernavin <achernavin@netgate.com> Change-Id: Ia2b9a665368883c87448deee9bcf8d2ac1168357
2022-06-14docs: fix spelling errorsDave Wallace2-1/+5
- also add docs-spell to checkstyle-all make target Type: fix Fixes: 5f6422db9 Change-Id: I8e9d7d17a03ee7b55f4e1785983459c43af267f7 Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2022-06-14ip: reassembly - Add node level stats, fix customapp behaviorVijayabhaskar Katamreddy2-16/+77
Type: fix Added stats for success and failure cases Fixed Custom app behaviors for the error / drop cases Signed-off-by: Vijayabhaskar Katamreddy <vkatamre@cisco.com> Change-Id: Id6e981c7be5c5b3cee5af2df505666d5558da470
2022-06-13build: update makefile for ubuntu 22.04 docker executorsSaima Yunus1-2/+9
* apt '—force-yes' is deprecated in the version of apt in Ubuntu 22.04 * several Ubuntu-22.04-specific packages (e.g. python3-virtualenv, libssl-dev, clang clang-format-11) are needed in the current VPP installation as well Type: fix Signed-off-by: Saima Yunus <yunus.saima.99@gmail.com> Change-Id: I96ead90152f692233da812cdc853792bedb47c3c
2022-06-13docs: cleaning up VPP documents by deleting unnecessary info.Saima Yunus2-2/+111
- cleaned up the 'build/run VPP' docs Type: docs Signed-off-by: Saima Yunus <yunus.saima.99@gmail.com> Change-Id: I9dbddbe1932804b8d507cb2f1631cd7116e59072
2022-06-13rdma: bump to rdma-core 41.0Benoît Ganne1-2/+2
Type: improvement Change-Id: Ifdbb879d3018996c09f0caf55df11038ead173a2 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2022-06-13dpdk: add support allow/block scan mode for vmbus devXiaoming Jiang1-0/+76
Type: improvement Signed-off-by: Xiaoming Jiang <jiangxiaoming@outlook.com> Change-Id: Id3f45968cd24f53350dce365b2cc9b3191ec836f
2022-06-10vcl: fix iperf3 server crash issue when it runs over vpp host stack.Liangxing Wang2-1/+19
Issue: Let iperf3 server run via ldp and vcl on top of vpp's host stack. If iperf3 client connects this iperf3 server with tcp MSS setting option, iperf3 server will always crash. Root cause: When MSS option is specified by iperf3 client, iperf3 server will recreate the listening socket firstly, then call setsockopt() to set MSS immediately. Iperf3 code can be referred here: https://github.com/esnet/iperf/blob/58332f8154e2140e40a6e0ea060a418138291718/src/iperf_tcp.c#L186. However, in vcl layer vpp_evt_q of this recreated session is not allocated yet. So iperf3 server crashes with vpp_evt_q null pointer access. Fix: Add session vpp_evt_q null pointer check in vcl_session_transport_attr(). Add a vcl test case for this MSS option scenario. Type: fix Signed-off-by: Liangxing Wang <liangxing.wang@arm.com> Change-Id: I2863bd0cffbe6e60108ab333f97c00530c006ba7
2022-06-10vppinfra: fix bihash_8_16 entry format functionBenoît Ganne1-2/+1
Type: fix Change-Id: I1e8655baaf09b455f7f0052452402a372f738d0f Signed-off-by: Benoît Ganne <bganne@cisco.com>
2022-06-10hsa: allow first segments larger than 4g for proxyFlorin Coras2-14/+5
Type: improvement Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I9c502a491ff56806a2e631f7a4c18903a2e93ab2
2022-06-10ip: improve ip ACL tracesBenoît Ganne3-10/+26
Type: improvement Change-Id: I85c73cb940d81d0b249eda0d57de135bcd798418 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2022-06-09vppinfra: missing __clib_export for clib_pmalloc_alloc_alignedDamjan Marion1-2/+2
Type: improvement Change-Id: I7489327d8b9c5f69b4ceb2159456f00f8a3612df Signed-off-by: Damjan Marion <damarion@cisco.com>
2022-06-08udp: add cli to dump registered portsBenoît Ganne1-0/+93
Type: improvement Change-Id: Ic949e3136a7cf27011d098a50e91920f83226ea9 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2022-06-08wireguard: increment interface RX countersMatthew Smith1-0/+15
Type: improvement When packets were received and processed successfully, increment the byte/packet counters for the tunnel interface. Change-Id: I42855607ac6916de641be42aac86c9942cc97140 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2022-06-07classify: fix sesssion details apiNathan Skrzypczak1-1/+1
We were not allocating space for the variable length payload in the response message. Type: fix Change-Id: I345102f4555f66c5632ab0882ca1dd178e98eb7b Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
2022-06-07vlib: fix crash on packet on deleted interfacePim van Pelt1-3/+6
If ip4_neighbor_probe (or any other) is sending packet to a deleted interface, ASSERT trips and dataplane crashes. Example: create loopback interface instance 0 set interface ip address loop0 10.0.0.1/32 set interface state GigabitEthernet3/0/1 up set interface state loop0 up set interface state loop0 down set interface ip address del loop0 10.0.0.1/32 delete loopback interface intfc loop0 set interface state GigabitEthernet3/0/1 down set interface state GigabitEthernet3/0/1 up comment { the following crashes VPP } set interface state GigabitEthernet3/0/1 down This sequence reliably crashes VPP: (gdb)p n->name $4 = (u8 *) 0x7fff82b47578 "interface-3-output-deleted” If the interface doesn't exist, return ~0 and be tolerant of this in the two call sites of counter_index() Type: fix Signed-off-by: Pim van Pelt <pim@ipng.nl> Change-Id: I90ec58fc0d14b20c9822703fe914f2ce89acb18d