aboutsummaryrefslogtreecommitdiffstats
path: root/build-data/platforms/vpp.mk
AgeCommit message (Collapse)AuthorFilesLines
2019-11-08build: use cmake build typesDamjan Marion1-26/+5
Type: make Change-Id: If822c85d6ff26982516ea1d597ca81aa84773b2b Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-06-07build: add -Wall and -fno-common, fix reported issuesBenoît Ganne1-14/+20
Type: refactor Change-Id: I8489ccd54411c2aa9355439c5641dc31012c64a2 Signed-off-by: Benoît Ganne <bganne@cisco.com> Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-05-06gcov / test framework: sigterm not sigkillDave Barach1-3/+2
Otherwise, gcov data vanishes without a trace. Add a __gcov_flush() call to the unix signal handler, under #ifdef CLIB_GCOV. Add -DCLIB_GCOV to vpp_gcov_TAG_CFLAGS. Change-Id: I2726e671b26dfbe7fae88f46a8207bb2b5106884 Signed-off-by: Dave Barach <dave@barachs.net>
2019-02-19VPP-1504: Remove JVPPMichal Cmarada1-1/+1
As part of JVPP migration this removes JVPP completely from VPP. Change-Id: I6b74e7961aa474ae471e63fe43a624cd9fc3659b Signed-off-by: Michal Cmarada <mcmarada@cisco.com>
2019-02-01Remove -z now from LDFLAGSDamjan Marion1-1/+1
It significantly increases link time, and slows down VPP startup. Change-Id: I200448212a3254b1292d4e52d2751214240e2bc4 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-09-09cmake: Move VOM to cmakeMohsin Kazmi1-0/+1
Change-Id: I352dbb8e972e59a4caae4acd507153446470ce6b Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2018-09-07post move-to-cmake cleanupDamjan Marion1-24/+0
Change-Id: I87b8f054bbb54895429578dfe565e72331beb5b2 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-09-02Switch to cmakeDamjan Marion1-3/+0
Change-Id: I982b69390c55b5ffbd744f355efc0aaf425b360c Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-08-17CMake as an alternative to autotools (experimental)Damjan Marion1-0/+3
Change-Id: Ibc59323e849810531dd0963e85493efad3b86857 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-08-01Move java api to extras/Damjan Marion1-1/+1
Change-Id: Ibd5cbbdfb22a235442cddaebc9eae9a3c4e35ec9 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-07-18Add config option to use dlmalloc instead of mheapDave Barach1-1/+3
Configure w/ --enable-dlmalloc, see .../build-data/platforms/vpp.mk src/vppinfra/dlmalloc.[ch] are slightly modified versions of the well-known Doug Lea malloc. Main advantage: dlmalloc mspaces have no inherent size limit. Change-Id: I19b3f43f3c65bcfb82c1a265a97922d01912446e Signed-off-by: Dave Barach <dave@barachs.net>
2018-06-04Enable Position Independent Executable for production VPPNeale Ranns1-1/+1
Change-Id: I0f81423b854be1dc456df696416e5f3747393208 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-05-16Fix broken compilation for non-numa aware platformsSachin Saxena1-0/+1
- The dpdk plugin always looks for libnuma library during compilation. For non-numa aware platforms compilation breaks, if third party libnuma lib is not available. - Issue is more severe with Cross Compilation scenario where one has to download and cross compile libnuma-dev package even when target platofrom is NUMA disabled. Like when cross compiling for ARM platforms, Linaro tool-chain doesn't have libnuma by default. Change-Id: Ib85b3188b787c23ba33b47e3f6123c74fd37190e Signed-off-by: Sachin Saxena <sachin.saxena@nxp.com>
2018-05-12dpdk: Add build related keywords for failsafe PMDRui Cai1-0/+1
Added build related keywords for TAP, FAILSAFE PMD and also added some missing keywords for mlx4 PMD This is part of initial effort to enable vpp running over dpdk on failsafe PMD in Microsoft Azure (1/4). Change-Id: I2aebf209fbc6db030185f41971b51a593a003a3a Signed-off-by: Rui Cai <rucai@microsoft.com>
2018-04-27Move VOM to extras/vomDamjan Marion1-5/+1
Change-Id: Iea174f03dfba3bd06024db0f0cc373532300dcae Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-01-10makefile set CXXFLAGS so they are propageted to sub-buildsNeale Ranns1-0/+3
Change-Id: I55d9953851062f7106c66701d46bcd9073cf1ee4 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2017-11-11Handle CPU flags from autotools projectDamjan Marion1-31/+13
Change-Id: Id085c1e3cbc7bf03df02755f9e35896cdb57e9e3 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-11-06Add --disable-vom config optionDave Barach1-1/+7
The vpp object model consumes more than half of the entire [initial] build time, so it's worth adding a config option. Change-Id: I86ad41f78160d93835804235b8b4a3fc7988f2f7 Signed-off-by: Dave Barach <dave@barachs.net>
2017-08-14dpdk: cleanup unused build option *_uses_dpdk_cryptodev_swSergio Gonzalez Monroy1-1/+0
Change-Id: I62939592bd3cb151e02c55a3f1ee6e7d1ce469cb Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
2017-07-17Fix unlinking of /dev/shm files.Dave Wallace1-1/+1
- api-segment prefix not used when unlinking shm files - unlink root region on exit if no clients referenced - stale reference to freed segment name - don't add fake client to /db unless CLIB_DEBUG > 2 - turn off the gmond plugin - clean up unused vars in vpp/api Change-Id: I66451fcfd6ee64a12466c2d6c209050e3cdb74b7 Signed-off-by: Dave Wallace <dwallacelf@gmail.com> Signed-off-by: Dave Barach <dave@barachs.net>
2017-05-09Fix remaining 32-bit compile issuesDamjan Marion1-0/+5
Change-Id: I9664214652229b663c3e3ba7406b4ede96bfb123 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-04-25Add support for 32-bit x86 compilation in MakefilesDamjan Marion1-2/+5
Change-Id: Ida73678b47b685abef4e81b5cad9fc13eb330850 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-03-10Retire vpp_liteDamjan Marion1-5/+0
vpp_lite platform is not needed anymore as same efect can be achieved with following startup.conf config: plugins { plugin dpdk_plugin.so { disable } } Change-Id: I690ea8ceb1c6e1fe32e01e7da54e9958019a93bf Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-02-07Multiple platofrm support for dpdk/Makefile, fix optimizationsDamjan Marion1-3/+0
Using -march=native was causing SIGILLs on Atoms. Change-Id: I98c7fdaa139e3db70c972950dc9c167bf5803656 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-01-31Prep work for Coverity upload processing via JenkinsDave Barach1-0/+6
Change-Id: I2575d780d19e12ddf8a77e5596e5d7cc3dbf4233 Signed-off-by: Dave Barach <dave@barachs.net>
2017-01-27dpdk: rework cryptodev ipsec build and setupSergio Gonzalez Monroy1-1/+1
Build Cryptodev IPsec support by default when DPDK is enabled but only build hardware Cryptodev PMDs. To enable Cryptodev support, a new startup.conf option for dpdk has been introduced 'enable-cryptodev'. During VPP init, if Cryptodev support is not enabled or not enough cryptodev resources are available then default to OpenSSL ipsec implementation. Change-Id: I5aa7e0d5c2676bdb41d775ef40364536a081956d Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
2017-01-10Added a sub-case to take into Thunderx platformMarco1-0/+7
Change-Id: Ib440414693af6fe29ffaf78fc3b2992911afbcc6 Signed-off-by: Marco <marco.varlese@suse.com>
2017-01-01Move java,lua api and remaining plugins to src/Damjan Marion1-3/+1
Change-Id: I1c3b87e886603678368428ae56a6bd3327cbc90d Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-12-28Reorganize source tree to use single autotools instanceDamjan Marion1-3/+1
Change-Id: I7b51f88292e057c6443b12224486f2d0c9f8ae23 Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-12-26dpdk: Add support for Mellanox ConnectX-4 devicesDamjan Marion1-0/+1
Due to external library dependency support for Mellanox devices is disabled. To enable it uncoment following line: vpp_uses_dpdk_mlx5_pmd = yes in build-data/platforms/vpp.mk and install OFED libraries. Change-Id: I131d52b5d449a958349f31f9cc04311948f78b71 Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-11-28dpdk: add ipsec cryptodev supportSergio Gonzalez Monroy1-0/+1
DPDK Cryptodev support and related IPsec ESP nodes using DPDK Cryptodev APIs. When DPDK Cryptodev support is enabled, the node graph is modified by adding and replacing some of the nodes. The following nodes are replaced: * esp-encrypt -> dpdk-esp-encrypt * esp-decrypt -> dpdk-esp-decrypt The following nodes are added: * dpdk-crypto-input : polling input node * dpdk-esp-encrypt-post : internal node * dpdk-esp-decrypt-post : internal node Change-Id: I6dca9a890abaf4fb2a4fffce3fd08ac013e4d701 Signed-off-by: Zhang, Roy Fan <roy.fan.zhang@intel.com> Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
2016-11-12Add clang to 'make verify'Damjan Marion1-0/+5
Change-Id: I9ba84632da93ffb7713064db51f2888fc212713a Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-07-13Add plugins debian packagingDamjan Marion1-1/+1
New debian package "vpp-plugins" is created with enabled plugins. Change-Id: I8920178e8874f12e075858001ec44257dfaf497d Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-07-08Multiple changes in the plugin build infraDamjan Marion1-3/+1
- configure.ac - some plugins are enabled by default - Plugin .so files are placed into corresponding subdirs - WITH_PLUGIN_TOOLKIT macro is retired - not needed anymore - plugins/build-data is removed - plugin makefiles are not building static libs anymore - plugin makefiles are not installing header files to /usr/include anymore Change-Id: I55681bd9ce34811f7eb1b2b24d9f0ca42df1cf04 Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-07-01Simple ip4 NAT pluginDave Barach1-0/+4
Change-Id: Iffe77bf2a05ced41474540ff54a842101aad7c41 Signed-off-by: Dave Barach <dave@barachs.net>
2016-06-28Fix native build on non x86_64 systemsDamjan Marion1-0/+6
Change-Id: Iab9f6793112f19a5b54a555623d84099aa8bb03e Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-05-19Add support for multiple microarchitectures in single binaryDamjan Marion1-2/+5
* compiler -march= parameter is changed from native to corei7 so code is always genereted with instructions which are available on the Nehalem microarchitecture (up to SSE4.2) * compiler -mtune= parameter is added so code is optimized for corei7-avx which equals to Sandy Bridge microarchitecture * set of macros is added which allows run-time detection of available cpu instructions (e.g. clib_cpu_supports_avx()) * set of macros is added which allows us to clone graph node funcitons where cloned function is optmized for different microarchitecture Those macros are using following attributes: __attribute__((flatten)) __attribute__((target("arch=core-avx2))) I.e. If applied to foo_node_fn() macro will generate cloned functions foo_node_fn_avx2() and foo_node_fn_avx512() (future) It will also generate function void * foo_node_fn_multiarch_select() which detects available instruction set and returns pointer to the best matching function clone. Change-Id: I2dce0ac92a5ede95fcb56f47f3d1f3c4c040bac0 Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-04-20Python-API: Inital commit of Python bindings for the VPP API.Ole Troan1-1/+1
See: https://wiki.fd.io/view/VPP/Python_API Change-Id: If135fc32208c7031787e1935b399d930e0e1ea1f Signed-off-by: Ole Troan <ot@cisco.com>
2016-04-20Add TAG=vpp_gcov which compiles vpp to produce .gcda filesDave Barach1-0/+5
Change-Id: Ib6a0940e08f9e0983f3ec70f9e8488c2185ca4da Signed-off-by: Dave Barach <dave@barachs.net>
2016-04-11Add configure option to enable building unit testsDamjan Marion1-0/+3
Same template should be used for other libs... Change-Id: Icc771cb6b243d215f30fb51c0dbc028e497a74c6 Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-04-01Add options to link with external DPDK treeDamjan Marion1-1/+6
By uncommenting following lines in the build-data/platforms/vpp.mk VPP links nicely with packaged DPDK 2.2 distributed with Ubuntu 16.04 LTS. vpp_uses_external_dpdk = yes vpp_dpdk_inc_dir = /usr/include/dpdk vpp_dpdk_lib_dir = /usr/lib vpp_dpdk_shared_lib = yes Change-Id: Id5b7d95bac6aa60341933b92e86d949a9abf1a5d Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-03-25Use rte_mempool private data for storing vlib_buffer_tDamjan Marion1-2/+0
Change-Id: If3fc88a35bc0b736376113a39667caea42802ea1 Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-02-26Add support for native vpp_lite (non-dpdk) platformDamjan Marion1-0/+2
Change-Id: Icaa71957f67b923bc9795baa78c7495055615672 Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-02-10Compile with -Werror, so Jenkins will catch warningsDave Barach1-4/+4
Change-Id: I9255c75b6c6cbc638cdcc411632a924cb06f28c0 Signed-off-by: Dave Barach <dave@barachs.net>
2016-02-02Enable ganglia module integration buildDave Barach1-1/+1
Change-Id: Ia49e9f246e8318ba74195c3397472fb0c102389b Signed-off-by: Dave Barach <dave@barachs.net>
2015-12-16Move vppctl to vpp-api-testDamjan Marion1-1/+1
Change-Id: I4af0eb9c09d14a1a9803cf1b25bc3d7b814c82cc Signed-off-by: Damjan Marion <damarion@cisco.com>
2015-12-16Add vppctl as a simple cli interface to vppEd Warnicke1-1/+1
This patch provides a pretty simple hack on top of vpe_api_test to give users a cli interface to vpp. Example: sudo vppctl show api client sudo vppctl show int It has the advantage that users can use bash shell scripting and history with it. Change-Id: I621dd8e29269e14a83b4887f20adcfbe5f946b99 Signed-off-by: Ed Warnicke <eaw@cisco.com>
2015-12-15Remove vppversion subtree, move elftool to vppinfraDamjan Marion1-1/+1
Change-Id: I26b29a0f53f81a28cbf264f5299f9a3978735574 Signed-off-by: Damjan Marion <damarion@cisco.com>
2015-12-08Initial commit of vpp code.v1.0.0Ed Warnicke1-0/+38
Change-Id: Ib246f1fbfce93274020ee93ce461e3d8bd8b9f17 Signed-off-by: Ed Warnicke <eaw@cisco.com>