summaryrefslogtreecommitdiffstats
path: root/build/external/patches
AgeCommit message (Collapse)AuthorFilesLines
2022-08-30dpdk: fix arm iavf rx vector path on 22.03Tianyu Li1-0/+486
dpdk 22.03 introduces iavf driver but misses rx vector path on Arm. This causes VF fail to receive packet when running VPP device test with no-multi-seg configuration. Add iavf basic Neon RX support to fix this. Type: fix Fixes: 2f132efc3caf ("dpdk: bump to DPDK v22.03") Signed-off-by: Tianyu Li <tianyu.li@arm.com> Change-Id: I75ae74c8060428cee0e1c235feab1246c014801e
2022-06-13dpdk: add support allow/block scan mode for vmbus devXiaoming Jiang1-0/+76
Type: improvement Signed-off-by: Xiaoming Jiang <jiangxiaoming@outlook.com> Change-Id: Id3f45968cd24f53350dce365b2cc9b3191ec836f
2022-05-05dpdk: fix generic flow input parsing in FDIRTing Xu1-0/+96
This patch fixes the issue that in DPDK FDIR generic flow parsing, the inputs will be changed during processing, which will lead to a failure in vnet flow when creating generic flow rules. Type: fix Signed-off-by: Ting Xu <ting.xu@intel.com> Change-Id: I107735a305ff48593d66746e0cd642c76ad5700d
2022-04-06build: remove nasmDamjan Marion2-26/+0
Type: make Change-Id: I5ee34e9d7156ccdc7a8310e8332347d850459495 Signed-off-by: Damjan Marion <damarion@cisco.com>
2022-04-05dpdk: bump to DPDK v22.03Dastin Wilski1-0/+57
This patch bumps dpdk version from 21.11 to 22.03. Type: feature Signed-off-by: Dastin Wilski <dastin.wilski@gmail.com> Change-Id: I152a7857378371d3fd26d7473421c2b3113cd3ee
2022-03-14dpdk: add patch to support i226vMatthew Smith1-0/+137
Type: improvement Add a patch to the DPDK 21.11 build to enable the PCI device ID for the I226-V. Signed-off-by: Matthew Smith <mgsmith@netgate.com> Change-Id: I82ff4b70e6b6e0ba0803519943190a564e85d2ac
2022-03-08crypto-ipsecmb: bump to ipsecmb v1.2Marcel Cornu1-0/+13
Type: feature This patch bumps ipsecmb library version from 1.1 to 1.2 Signed-off-by: Marcel Cornu <marcel.d.cornu@intel.com> Change-Id: I181e43c711fe530296c037d59b53fe3c5f2719ea
2022-01-18dpdk: add qat gen4-b device supportFan Zhang2-0/+82
Type: feature This patch adds the GEN4-b support to DPDK Cryptodev PMD and fixes a problem on its raw api AEAD enqueue. Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com> Change-Id: I3a1a9b0ae51a5725ce9d5265a059e26ceb16c49e
2021-09-16dpdk: fix the outer ipv4 checksumMohsin Kazmi2-0/+110
Type: fix Change-Id: Ibc476b807ba0310f0cc926b0e386831ef0cbcc25 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2021-08-16dpdk: patch i40e PMD to disable source pruningMatthew Smith1-0/+43
Type: improvement X710/XL710 devices have source pruning enabled by default and DPDK provides no option to disable it. This prevents VRRP from working properly. Disable source pruning while setting up the main VSI. Change-Id: Iaf89f7dae8992e3bd0b9fae83878daa27a5bb931 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2021-07-28dpdk: fix cryptodev raw data path dequeueFan Zhang1-0/+40
This patch fixes the dpdk cryptodev raw data path dequeue problem. The fix involves DPDK QAT PMD changes and is to be upstreamed as a patch. The patch is also sent to DPDK mailing list. Type: fix Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com> Change-Id: I1a9253c8a7fbc2aa43f19f90da45e64e2840356a
2021-04-22quic: update quicly to v0.1.3Mathias Raoul3-0/+73
This bumps quicly version to v0.1.3 ( sha d44c089364067dbcdfbad7fb2c821900fb4aef5e in https://github.com/h2o/quicly ) Also simplifies the build to only make needed dependancies, and silence compiletime warnings Type: feature Change-Id: Ie00ec7e408d234464871b68ddc79bb33dc4179ed Signed-off-by: Mathias Raoul <mathias.raoul@gmail.com> Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
2021-01-22quic: quicly v0.1.2 updateMathias Raoul1-0/+60
- update quic plugin with new quicly/picotls API - remove packet allocator - remove crypto batching - update picotls plugin - add cli for quicly congestion control configuration Type: feature Change-Id: If76ef31c43b430eea2f7674539b2112aee0f351e Signed-off-by: Mathias Raoul <mathias.raoul@gmail.com>
2021-01-21dpdk: dpdk i40e patch cherry-pickChenmin Sun1-0/+134
This patch fixes flex payload flow creation failure issue Type: fix Signed-off-by: Chenmin Sun <chenmin.sun@intel.com> Change-Id: I3ac0a168dadd033a668d7bd6f5e78798aedb61a5
2020-11-25dpdk: patch broken virtio macroMatthew Smith1-0/+42
Type: fix In DPDK 20.08, the macro ASSIGN_UNLESS_EQUAL(), which is defined in the virtio PMD code, is broken. It does not actually set the variable that is passed in to the value that is passed in. It just assigns the value to a local variable that it declares. This results in virtqueue_clear_net_hdr() failing to clear the fields in the virtio net header. This can cause packets which were sent over an IPsec tunnel and are subsequently transmitted on a virtio interface to have garbage in the virtio net header. Apply a post-20.08 patch from upstream to fix it. Change-Id: Ic53e89d859db628e26a3c1988e53b626fede94d7 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2020-11-23crypto-ipsecmb: bump to intel-ipsec-mb version 0.55Dariusz Kazimierski1-0/+13
Type: feature This patch bumps the intel-ipsec-mb engine version from 0.54 to 0.55, to avail performance improvement brought by the library. Signed-off-by: DariuszX Kazimierski <dariuszx.kazimierski@intel.com> Signed-off-by: PiotrX Kleski <piotrx.kleski@intel.com> Reviewed-by: Fan Zhang <roy.fan.zhang@intel.com> Change-Id: Iea114acc6e8e55020e7409ab2d1d00f4c2081e9c
2020-10-23build: fix typo in dpdk-20.08 patch #0003Dave Wallace1-2/+2
Type: fix Signed-off-by: Dave Wallace <dwallacelf@gmail.com> Change-Id: Id0b3264e723f1df161a606e4dbdcd70c36d448a4 (cherry picked from commit ee3ea114961610476bac544a979fdee8278d2b9e)
2020-10-17build: backport dpdk usertools support python3 only patchDave Wallace2-1/+213
- On Centos-8, 'make install-ext-deps' fails due to the bpr-mangle-shebangs script failing the dpdk usertools python scripts containing '#!/usr/bin/env python'. Backport usertools section of the DPDK patch which fixes this issue: http://git.dpdk.org/dpdk/commit/?id=3f6f83626cf4967a99382a6518a614a1bf3d2c20 - Also fix README to reflect name change of dpdk master branch to 'main'. Type: fix Change-Id: I487b1ff2da786a4a3fd8fb0f859436b0e1885f1b Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2020-10-14crypto: fixed ipsec_mb lib dependenciesPiotrX Kleski1-0/+13
Type: fix This patch re-enables libIPSec_MB build for the ipsecmb crypto engine plugin. Also since DPDK meson build relies on system installed libIPSec_MB.so that may be inconsistent with VPP compiled one (system installed version vs VPP locally compiled version for example), this patch also disables all libIPSec_MB dependant PMDs from DPDK build. Also ipsec-mb version is incresed to 0.54. Signed-off-by: PiotrX Kleski <piotrx.kleski@intel.com> Reviewed-by: Fan Zhang <roy.fan.zhang@intel.com> Change-Id: I2ff9e7cd0c35cff9fa642895301a26a5350ea94e
2020-09-18dpdk: call the meson-based build instead of MakefilesMohammed Hawari1-0/+88
Type: feature Signed-off-by: Mohammed Hawari <mohammed@hawari.fr> Change-Id: I576d92605da6d43e9b9f12238b18a518a0d69385
2020-09-09crypto: change cryptodev with new cryptodev APIFan Zhang1-0/+1606
Type: feature This patch updateds cryptodev engine uses new DPDK Cryptodev API planned to be upstreamed in DPDK 20.11. Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com> Signed-off-by: Piotr Bronowski <piotrX.bronowski@intel.com> Change-Id: I8dd1a8ac643f1e952deb787e466b76ea7aa5f420
2020-05-13dpdk: DPDK 20.05 iavf fdir bug-fix patch cherry pickChenmin Sun1-0/+70
After VF reset, FDIR rule still takes effect. To solve the issue, this patch adds to flush all flows before flow uninit. VIRTCHNL sends message to PF by Admin Queue, so flow flush should be implemented before Admin Queue shut down. Type: fix Signed-off-by: Chenmin Sun <chenmin.sun@intel.com> Change-Id: I8ba0db7cd7646eaabd5745f74952016b0b968bbb
2020-04-22dpdk: DPDK 20.05 iavf flow director backporting to DPDK 20.02Chenmin Sun17-0/+6436
0001 ~ 0014 patches are for virtual channel and PMD 0015 is the iavf fdir framework 0016 ~ 0017 are for the iavf fidr driver Type: feature Signed-off-by: Chenmin Sun <chenmin.sun@intel.com> Change-Id: I38e69ca0065a71cc6ba0b44ef7c7db51193a0899
2020-03-27quic: Check quicly version tag at compile timeMathiasRaoul12-532/+21
- updates the quicly version to 0.1.0-vpp - adds workaround for quicly_send()/assert_consistency() failure Type: feature Change-Id: I4c7e0ffc720ad9a685b89046a83646d59febd6cd Signed-off-by: MathiasRaoul <mathias.raoul@gmail.com> Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com> Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2020-03-22dpdk: false link down issue with ixgbe NICLijian.Zhang1-0/+66
This issue is observed with X520-2 NICs on FD.io lab Taishan server. After VPP booting up and bringing up the interfaces with command "set interface state <interface> up", it still shows link down status from the command "show hardware-interfaces". However, the hardware link status is actually up. dpdk_process() cannot get the hardware link status correctly via rte_eth_link_get_nowait(). In ixgbe_dev_link_update_share(), if the media type is fiber and the link is down, a flag (IXGBE_FLAG_NEED_LINK_CONFIG) is set. A callback to ixgbe_dev_setup_link_alarm_handler() is scheduled trying to set up the link and clear the flag afterwards. If the device is started or stopped before the flag is cleared, the scheduled callback is canceled. This causes the flag to remain set and subsequent calls to ixgbe_dev_link_update_share() return without trying to retrieve the link state because the flag is set. When the callback is canceled by either interface start or stop operation, in ixgbe_dev_cancel_link_thread(), after cancelling the callback/thread, unset the flag on the device to avoid this condition. Type: fix Signed-off-by: Lijian Zhang <Lijian.Zhang@arm.com> Reviewed-by: Honnappa Nagarahalli <Honnappa.Nagarahalli@arm.com> Reviewed-by: Jieqiang Wang <Jieqiang.Wang@arm.com> Change-Id: I04de377dc048307a78a5b7109ebdfaf376d5e029
2020-02-04dpdk: patch ixgbe driver to solve race conditionMatthew Smith1-0/+49
Type: fix Some fiber ports that are managed by the ixgbe PMD have the possibility to get into a state where link can never be brought up. This patch should fix it and will be submitted to upstream DPDK. Change-Id: Ia4d0df2e70d098b2151e513b96e8bd742151e8ce Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2020-01-31quic: update quicly to v0.0.10-vppMathiasRaoul1-0/+60
Type: feature Signed-off-by: MathiasRaoul <mathias.raoul@gmail.com> Change-Id: I5452f8bbd0ff9e2a57f7bd7d134a8824efa5f30a
2020-01-06quic: update quicly to v0.0.9-vppMathiasRaoul1-0/+60
Type: feature Signed-off-by: MathiasRaoul <mathias.raoul@gmail.com> Change-Id: I5cef549de8380b9b9534b8774819e42988f6b784
2019-12-17quic: update quicly to v0.0.8-vppMathiasRaoul1-0/+60
Type: feature Signed-off-by: MathiasRaoul <mathias.raoul@gmail.com> Change-Id: I7470d79d1e39716ff83ba2d2b320813d79e2554c
2019-12-06quic: update quicly to v0.0.7-vppMathiasRaoul1-0/+60
Type: feature Change-Id: Ieeb9abb59b4d094bbd7bfc04a9007d3cebd645d7 Signed-off-by: MathiasRaoul <mathias.raoul@gmail.com>
2019-11-25quic: update quicly to v0.0.6-vppMathiasRaoul2-0/+93
Type: feature Change-Id: Ib604cfdd55b72f0bc605d1d1e8b387e532b0a255 Signed-off-by: MathiasRaoul <mathias.raoul@gmail.com>
2019-11-16quic: replace quicly patch with upstreamed fixDave Wallace1-10/+11
- Replace the solution to the quicly time skew assert with h2o/quicly PR#222 which was merged upstream after verification that it resolved the vpp issue. Type: refactor Change-Id: I26df08e4108b054a28f50c964ddff1c80a592339 Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2019-11-04quic: fix quicly rtt time skewDave Wallace1-0/+15
- This patch to quicly fixes an intermittent failure in the rtt calculation when there is a time skew Type: fix Change-Id: If89c47401ee75c88f0eb65ae888b6914695b2aec Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2019-10-31build: bump nasm version to 2.14.02Damjan Marion1-26/+0
Type: make Change-Id: I9b598ce17c058709553a45524e18a64de642a8db Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-10-31build: remove obsolete dpdk patchesDamjan Marion2-132/+0
Type: refactor Change-Id: I2bad8d4e7b9d7868c949856d0bbabeccb6825273 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-10-04quic: update quicly to v0.0.5MathiasRaoul2-0/+93
-Update quicly patches -Remove event logger (removed from quicly). -Update quicly functions calls Type: feature Signed-off-by: MathiasRaoul <mathias.raoul@gmail.com> Change-Id: I0355befeb5ce961928f17225c83890ba87cf6ebc
2019-07-22quic: move patch for quicly 0.0.3Aloys Augustin1-0/+0
Change-Id: I58e58f1f297820b110013f4bf6ede827ced94a3d Type: fix Fixes: 5ff9765 Signed-off-by: Aloys Augustin <aloaugus@cisco.com>
2019-07-22quic: update quicly libraryAloys Augustin2-12/+0
Update quicly to latest version that includes our upstreamed patch. Change-Id: I0b26c72e49bce81daf4fb069b5818defd6cf25b9 Type: feature Signed-off-by: Aloys Augustin <aloaugus@cisco.com>
2019-07-15quic: integrate vpp crypto api for quic packets encryptionMathias Raoul1-0/+33
Type: feature Change-Id: I740f15a5ef959d31e94e59d652aa9f691db1f289 Signed-off-by: Mathias Raoul <mathias.raoul@gmail.com>
2019-07-09quic: fix passive disconnect handling & refactorNathan Skrzypczak1-0/+12
Type: refactor Change-Id: Ie54a77252e9f58a90f9e1f9595b9ede354952f70 Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
2019-05-14QUIC multi thread updateAloys Augustin1-0/+0
* Add support for multiple threads * Replace quicly buffers with fifos * Fix cleanup of sessions * Update quicly release version Change-Id: I551f936bbec05a15703f043ee85c8e1ba0ab9723 Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
2019-04-03QUIC: Build system updateAloys Augustin1-0/+57
Download a single tarball with the sources of quicly and its dependencies from github instead of cloning submodules. Change-Id: Id9955565d46f595b3a14ba3408c24045d4acd296 Signed-off-by: Aloys Augustin <aloaugus@cisco.com>
2019-04-02dpdk 19.02: fixed speed capability error issueChenmin Sun1-0/+101
Device speed capability should be specified based on different phy types instead of a fixed value, this patch fix the issue. Change-Id: Ia76231aefbcb0fe8370867b6e86a0d3bb9e169a0 Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
2019-03-29revert quicly related build/external changesDamjan Marion1-57/+0
We dont't want git pull there, there is simple way to grab tarball from github for every single commit Change-Id: I7a98cab7660750e48084279d8b9892cdf229bceb Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-03-29Integrate first QUIC protocol implementationNathan Skrzypczak1-0/+57
Currently supports on single stream exposed through standard internal APIs Based on libquicly & picotls by h2o Change-Id: I7bc1ec0e399d1fb02bfd1da91aa7410076d08d14 Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
2019-03-22dpdk: add ENIC PMD patch to untag default vlanHyong Youb Kim1-0/+31
The ingress vlan rewrite mode affects the vlan header of ingress packet. The enic driver currently uses the 'passthrough' mode, which leaves the vlan header intact. As all packets in UCS network are tagged, this default mode leads to tagged ingress packets in the following cases where VPP expects untagged packets. 1. Trunk-mode vNIC on UCS standalone server. A remote device sends an untagged packet to the server. This packet is ultimately tagged with vlan 0 as it reaches the driver, and VPP sees an ingress packet tagged with vlan 0. 2. Access-mode vNIC on UCS blade or standalone server. A remote device sends a packet on the vNIC's default vlan (e.g. 200) to the server. This tag is untouched, and VPP sees an ingress packet tagged with the default vlan (e.g. 200). In both cases, VPP expects to see untagged packets. To work around the issue, VPP currently enables vlan stripping on VIC interfaces, which breaks vlan sub-interface features. To avoid the current workaround, use the "untag default vlan" rewrite mode. With this mode, the VIC adapter removes the vlan header if it matches the default vlan. In the cases described above, VPP would see untagged packets. Packets tagged with non-default vlan (e.g. non-0 for case 1 and non-200 for case 2) are received with their tags intact, so VPP sees tagged packets as expected. The driver currently has no programmatic way to change the rewrite mode after rte_eal_init. So use this patch to change the mode for the time being. Change-Id: Iff6408275363ed52d6016e7516d745214d6b30d4 Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
2019-02-02dpdk: bump to dpdk 19.02Damjan Marion9-1231/+0
HQoS requires fixes to work with dpdk 19.02 so code is disabled and pending deprecation unless active maintainer is found. Change-Id: I3569c4287b6dfdd2c29e02375eb53bf01fa6ae84 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-12-12dpdk: net/bonding: fix buffer corruption in packetsIgor Mikhailov (imichail)1-0/+203
This fix is needed for setup with bonded interfaces. In some scenarios vpp might crash, this change fixes the issue. Change-Id: I0dc66e32b6c89dc3f8d552401833d6785a12c978 Signed-off-by: Igor Mikhailov (imichail) <imichail@cisco.com>
2018-10-26dpdk: fix mlx5 build on SUSEStephen Hemminger1-0/+39
Current mlx5 requires libmnl, and SUSE has a bug which installs the header file in incorrect location. Workaround (from upstream) is to use pkg-config. Change-Id: Iadfd2dc0df211876258c31da028af2e8934483b3 Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
2018-10-26dpdk: ENA PMD patch for failure on port restartMatthew Smith1-0/+359
Patch to fix a bug in the ENA PMD on starting a port that had previously been started and stopped. There was a failure to allocate descriptors on start because they had been allocated during the initial start and not released when the port was stopped. Issue reported/tracked at https://github.com/amzn/amzn-drivers/issues/86 Change-Id: Id9c8d598929f0561788b985011fe5dea8f4a21a5 Signed-off-by: Matthew Smith <mgsmith@netgate.com>