Age | Commit message (Collapse) | Author | Files | Lines |
|
Fix typo and put it on the correct level.
Type: fix
Change-Id: Ic7a8e557b22d0060d7f072132f00564e29d8e860
Signed-off-by: Lukas Vogel <vogel@anapaya.net>
|
|
Type: docs
Change-Id: Ic8f0204752b93339203fe9ba04fdb77ba635e6d8
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
This plugin implements a PoC of UDP-based tunnel substrate whose aim is
to specifically provide higher MTU to the upper layers by chunking
the payload PDUs into smaller packets with full 5-tuple.
At the same time, if there are multiple small packets to
the same destination during the vector processing, they
are packed into "carrier" packets up to underlay MTU size.
It does assume a trustworthy underlying medium, thus for the
operation over Internet it requires the use of encryption layer
underneath.
Type: feature
Change-Id: I323958fa8de62584f6ed15643ea689568a9a62bc
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Also retires old marvell plugin.
Change-Id: Icedec11f5661909058fdfe8d5fc455306adafacd
Type: feature
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
With this feature, session enable is now modified to have 3 modes of operation
session enable -- only enable session
session enable rt-backend sdl -- enable session with sdl
session enable rt-backend rule-table -- enable session with rule-table
session rule tables are now created on demand, upon adding first rule
to the rule table.
refactor session table to remove depenency from sesssion rules table. Now
session rules table APIs take srtg_handle and transport
proto instead of srt pointer.
Type: feature
Change-Id: Idde6a9b2f46b29bb931f9039636562575572aa14
Signed-off-by: Steven Luong <sluong@cisco.com>
|
|
Currently, the per-numa buffer allocation doesn't support skipping the
allocation altogether for a particular NUMA domain - if it's set to
zero, it instead uses the default allocation.
Therefore, this changes the behavior so that the default is only used
if no per-numa allocation is specified, and an allocation of zero
is honored by not allocating a buffer at all.
Type: improvement
Change-Id: Ie9133b179a88eb884aa3da921e65292daea0df2d
Signed-off-by: Lukas Stockner <lstockner@genesiscloud.com>
|
|
Type: refactor
This patch moves osi into a plugin, and also modifies
the init functions of llc and snap to preserve init
order dependency (llc_init --> osi_init --> snap_init).
While the initial intent was to move osi/llc/snap together
into a single plugin, there exists a dependency on llc
in vnet/ethernet, which would require further refactoring
and testing work.
Change-Id: Ic0eff030ee29c8d316c0e0fe13931451aa193527
Signed-off-by: Hadi Rayan Al-Sandid <halsandi@cisco.com>
|
|
Type: docs
Change-Id: I0d3395c1de51c086b2ac68cd92c97efe36665b62
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Type: docs
Change-Id: Id47dbab5e5661c76e6ff41237bbca5b5b15506c4
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
(cherry picked from commit 6e8b350a0154caee6e9f037ae4938b83fb5dcf20)
|
|
Provide all bytes as received from transport as data in the http
message to server. Additionally provide offset and length of target
path, target query, headers and body. Offers apis for parsing of
headers, percent decoding, target path/query syntax verification.
Type: improvement
Change-Id: Idbe6f13afa378650cc5212ea7d3f9319183ebbbe
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
No functional changes, just make it to respect original make binary
name used to start building
Type: improvement
Change-Id: Ic8568237fbb39c6a0d3b7405a9670e9410aeb752
Signed-off-by: Renato Botelho do Couto <renato@netgate.com>
|
|
Currently, buffers-per-numa is used for all NUMA domains, and there's
no way to allocate different amounts for each domain.
Therefore, this adds a per-NUMA-domain buffer config section, which
currently has a single option to set the number of buffers.
If it's not specified or set to zero, the code falls back to
buffers-per-numa as before.
Type: improvement
Change-Id: If35d7a9eff6f8d1d78063ea7873dbf50780d0ec3
Signed-off-by: Lukas Stockner <lstockner@genesiscloud.com>
|
|
Type: docs
Change-Id: If9cfc421a0769b68a8520e99c41c954db1973ca9
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Move sr_mpls folder under vnet to the plugin folder, update cmake configuration
and header paths, and add plugin.c to register plugin.
JIRA: VPP-2054
Type: improvement
Change-Id: I1ad6f287f67eb0c35588c339bcd51218fadf5f8e
Signed-off-by: Scott Hutton <schutton@cisco.com>
|
|
The tutorial uses old 18.04 Bionic Ubuntu release, and tries to
install vpp from packagecloud.io's bionic repository which does not
exist. However newer ubuntu releases' repositories exist, so let's
update to newer Ubuntu LTS version: 22.04 Jammy.
Also, the ubuntu vagrant box is old, so let's replace it to a newer,
generic/ubuntu2204, which uses libvirt provider (instead of virtualbox)
and updated frequently, works well for the tutorial. Due to using
libvirt provider, there is no need to customize the VM as those
customizations are present in the box by default.
The truested=yes part is removed from the apt source list command, as
we add gpgkey anyway, thus, no need for this.
Tutorial and vpp build tested with this new box and looks to be working
fine.
Type: docs
Signed-off-by: Elod Illes <elod.illes@est.tech>
Change-Id: Idcff693240fc6a1496a240e0d07c5ed43fe833e9
|
|
Type: docs
Change-Id: I4209b4edf387f2d7b88ecc338cca3b4901210ed2
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
(cherry picked from commit 455960759b5417c767ed331748c7ee76662ffd18)
|
|
Type: docs
Change-Id: Ia459d5ba6f7da3081192c6aba156e66fb2d6377c
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Type: feature
Change-Id: I6898625c4e8854f777407dac3159e4c639a54860
Signed-off-by: Monendra Singh Kushwaha <kmonendra@marvell.com>
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Fix minor differences between Ubuntu 18.04 LTS and Ubuntu 22.04 LTS when
using the scheme to test new code.
Type: docs
Change-Id: I5810b6f3d76d8d98fa764b61828b1ca32507bd91
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Type: improvement
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: Ic124f44e64bd60f41e750b4118be3e8d1d1eb70b
|
|
Type: docs
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
Change-Id: Icd40064c06ccc53efba1cd9564613108b999b656
(cherry picked from commit 7c4027fa5e42a8cc7176cd62ab7a0043fb1933ff)
|
|
Type: fix
Change-Id: I3a258433cf507f48cd67332387eb7fef103a88f8
Signed-off-by: Steven Luong <sluong@cisco.com>
|
|
Type: feature
Change-Id: Icd9de05f2cbac0e5a6dfb1f1414f21dc4b893104
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: feature
Change-Id: I9ae0dbf28b4571a37c568b587b771f90c06f200d
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
Modified "VPP with Containers" doc section to run on Ubuntu 22.04 LTS.
Change-Id: Ic09b88cf0e3b492711222a1bb24552de964a7d03
Signed-off-by: hsandid <halsandi@cisco.com>
|
|
Setting and using the SOURCE_DATE_EPOCH variable takes
care of most of the magic necessary.
https://reproducible-builds.org/docs/source-date-epoch/
vpp-ext-deps packages after this change is being built with that
date set to date of the last modification of the
subtree (similar logic to deriving the "number" for
the package version)
For the rest of the packages, pinning the following
three variables should result in bit-identical
artifacts across multiple runs:
export SOURCE_DATE_EPOCH=$(date +%s)
export VPP_BUILD_HOST="buildhost"
export VPP_BUILD_USER="builduser"
Add a blurb in the docs describing this new functionality.
Type: improvement
Change-Id: I71b085f0577b2358aa98f01dafd8e392239420a6
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Type: docs
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
Change-Id: I42af9706461034957f83103e2756cc6bfab054f7
|
|
Type: docs
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
Change-Id: Id39d7d6a6340e65885ab0845b6fc9a2b81e4f565
(cherry picked from commit 493b8990d1185f818890560101e13e1b69f54b1d)
|
|
Type: docs
Change-Id: Iceee9ef489f7f68049882651bb338311295ca12d
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
In order to be able to filter on encapsulated packet, a new node
has been added to the ip4/6-unicast arcs.
Type: feature
Change-Id: I1e8ee05bc6d0fce20cadd8319c81bab260c17d21
Signed-off-by: Maxime Peim <mpeim@cisco.com>
|
|
For the reasons of modularity and security, it is useful
to have various functionality split into processes different from VPP.
However, this approach presents the challenges of managing those processes,
and is markedly different from simply running everything within VPP process.
This plugin is an experiment in having the VPP itself start off a monitor
process which in turn starts the child processes, and restarts them if they
quit.
If the VPP process ceases to exist, the monitor process terminates all
the descendant processes and quits itself.
This allows to preserve the "single entity to manage" approach of
simply running a barebones VPP.
An example of running it:
export DPDK_CONFIG=""
export DISABLED_PLUGINS=dpdk
export EXTRA_VPP_CONFIG="fateshare { monitor ./build-root/install-vpp_debug-native/vpp/bin/vpp_fateshare_monitor command ./test1 }"
make run
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
Change-Id: I66221fd7403f220d9652fe76958ca499cfd070a7
Type: feature
|
|
This is the initial commit of a NPTv6 (RFC6296) implementation for VPP.
It's restricted to a single internal to external binding and runs
as an output/input feature on the egress interface.
Type: feature
Change-Id: I0e3497af97f1ebd99377b84dbf599ecea935ca24
Signed-off-by: Ole Troan <otroan@employees.org>
|
|
Add a new native idpf driver. This patch enables the device
initialization. Add some necessary functions and definations
for input and output. A new version of virtchnl is introduced.
Type: feature
Signed-off-by: Ting Xu <ting.xu@intel.com>
Change-Id: Ibbd9cd645e64469f1c4c8b33346c1301be3f6927
|
|
- Package update performed by
1. updating pip, pip-tools, setuptools
2. 'make test-refresh-deps' on ubuntu 22.04
3. fixing 'make test' and 'make docs' issues
on ubuntu 22.04
4. 'make test-refresh-deps' on ubuntu 20.04
- Add dependency for 'make test-refresh-deps'
to insure python venv is set up.
- Update of python formatter, black,
caused reformating of 41 python code
files.
Type: make
Change-Id: I7cafdf4b5189065ac57cb6b254937f6e0897a924
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
Type: fix
Change-Id: Ia0d6f57790dbca92662c6d8b986c325f1c399131
Signed-off-by: Steven Luong <sluong@cisco.com>
|
|
Type:fix
Change-Id: Ie2ae728450ef123379b697cdf9c873d5bec01b47
Signed-off-by: yanlong <dyl_wlc@163.com>
|
|
- Move the VPP API Change Process documentation
from the wiki page into the in-tree VPP docs
Type: docs
Change-Id: I42f661618b8632230bebe3aa8fbad455b9a05d01
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
Type: fix
Change-Id: I84bbb28490d9c66c5bf55839ab75b3aec1bf5854
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Change-Id: I342de0a375b783725aa2b621c1c70bc8bf646450
Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
Type: improvement
|
|
- Updated/rebased version of https://gerrit.fd.io/r/c/vpp/+/34199
Type: test
Change-Id: I43913ecfd11a4578bdb10c4be76253fe38d57976
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
Type: docs
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: I36764aa3c0e9657d228413aeafa0a54bbd755e49
|
|
Type: docs
Change-Id: Id9b0ca0d43db0e5a52fd9696a5cba77a6772db5b
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Type: docs
Change-Id: I88ae8452ed1b39a4c6d82b790f63f31deae4c2fa
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
(cherry picked from commit 5516fc0f3bf50657446c4e68556c9f76ea2a43a4)
|
|
Type: docs
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: I57f27f8ec4be7f3d8dc3d13ff4ea6b1b21c3cf6b
|
|
This feature enables the use of the classifier and ip-in-out-acl nodes
to redirect matching sessions via arbitrary fib paths instead of relying
on additional VRFs.
Type: feature
Change-Id: Ia59d35481c2555aec96c806b62bf29671abb295a
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: docs
Signed-off-by: Ondrej Fabry <ofabry@cisco.com>
Change-Id: I1e28c6858a986d6ede1c7a6d06055400fdc0196b
|
|
Type: docs
Fixes: 33909777c637 ("misc: unify pcap rx / tx / drop trace")
Signed-off-by: Nobuhiro MIKI <nmiki@yahoo-corp.jp>
Change-Id: I049616cfad300658e62e5026c0655ee6f07a2421
|
|
Type: docs
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: I70374ea376c895d92d5789debf4b437113e3d884
(cherry picked from commit 57302fe52f141c19b5448997774271d2eedf5cb1)
|
|
Type: docs
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: I8770a35c801126ffd2de8f58d79e6616642709a9
(cherry picked from commit 1513b381d8879d9d437bbbc9a270b4ff5f4b19ba)
|
|
Type: docs
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
Change-Id: I28c5cc0d54963389fe513c7de634f1a84c0bf11b
|