summaryrefslogtreecommitdiffstats
path: root/dpdk
AgeCommit message (Collapse)AuthorFilesLines
2016-03-14dpdk: fix link errorJean-Mickael Guerin1-1/+1
/usr/bin/ld: -f may not be used without -shared collect2: error: ld returned 1 exit status Indeed an extra "-fPIC" is given to ld, see the -Wl,-fPIC below: gcc -pie -fPIC -pthread -march=native -DRTE_MACHINE_CPUFLAG_SSE -DRTE_MACHINE_CPUFLAG_SSE2 -DRTE_MACHINE_CPUFLAG_SSE3 -DRTE_MACHINE_CPUFLAG_SSSE3 -DRTE_MACHINE_CPUFLAG_SSE4_1 -DRTE_MACHINE_CPUFLAG_SSE4_2 -DRTE_MACHINE_CPUFLAG_AES -DRTE_MACHINE_CPUFLAG_PCLMULQDQ -DRTE_MACHINE_CPUFLAG_AVX -DRTE_COMPILE_TIME_CPUFLAGS=RTE_CPUFLAG_SSE,RTE_CPUFLAG_SSE2,RTE_CPUFLAG_SSE3,RTE_CPUFLAG_SSSE3,RTE_CPUFLAG_SSE4_1,RTE_CPUFLAG_SSE4_2,RTE_CPUFLAG_AES,RTE_CPUFLAG_PCLMULQDQ,RTE_CPUFLAG_AVX -I/home/jmg/dev/vpp/build-root/install-vpp_debug-native/dpdk/include -include /home/jmg/dev/vpp/build-root/install-vpp_debug-native/dpdk/include/rte_config.h -O3 -W -Wall -Werror -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wold-style-definition -Wpointer-arith -Wcast-align -Wnested-externs -Wcast-qual -Wformat-nonliteral -Wformat-security -Wundef -Wwrite-strings -D_GNU_SOURCE -Wl,-Map=test.map,--cref -o test commands.o test.o test_pci.o test_prefetch.o test_byteorder.o test_per_lcore.o test_atomic.o test_malloc.o test_cycles.o test_spinlock.o test_memory.o test_memzone.o test_ring.o test_ring_perf.o test_pmd_perf.o test_rwlock.o test_mempool.o test_mempool_perf.o test_mbuf.o test_logs.o test_memcpy.o test_memcpy_perf.o test_hash.o test_thash.o test_hash_perf.o test_hash_functions.o test_hash_scaling.o test_debug.o test_errno.o test_tailq.o test_string_fns.o test_cpuflags.o test_mp_secondary.o test_eal_flags.o test_eal_fs.o test_alarm.o test_interrupts.o test_version.o test_func_reentrancy.o test_cmdline.o test_cmdline_num.o test_cmdline_etheraddr.o test_cmdline_portlist.o test_cmdline_ipaddr.o test_cmdline_cirbuf.o test_cmdline_string.o test_cmdline_lib.o test_red.o test_sched.o test_meter.o test_kni.o test_common.o test_devargs.o virtual_pmd.o packet_burst_generator.o test_link_bonding.o test_link_bonding_mode4.o test_link_bonding_rssconf.o test_pmd_ring.o test_pmd_ring_perf.o test_cryptodev_perf.o test_cryptodev.o test_kvargs.o -Wl,-pie -Wl,-fPIC -Wl,--no-as-needed -Wl,-export-dynamic -L/home/jmg/dev/vpp/build-root/install-vpp_debug-native/dpdk/lib -Wl,-g -L/home/jmg/dev/vpp/build-root/install-vpp_debug-native/dpdk/lib -Wl,--whole-archive -Wl,-ldpdk -Wl,--start-group -Wl,-lrt -Wl,-lm -Wl,-ldl -Wl,--end-group -Wl,--no-whole-archive Fixed by unsetting the flags -pie -fPIC out of LDFLAGS, these are not options for the linker. $ gcc -v Using built-in specs. COLLECT_GCC=gcc COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-linux-gnu/5/lto-wrapper Target: x86_64-linux-gnu Configured with: ../src/configure -v --with-pkgversion='Ubuntu 5.3.1-10ubuntu2' --with-bugurl=file:///usr/share/doc/gcc-5/README.Bugs --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --prefix=/usr --program-suffix=-5 --enable-shared --enable-linker-build-id --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --libdir=/usr/lib --enable-nls --with-sysroot=/ --enable-clocale=gnu --enable-libstdcxx-debug --enable-libstdcxx-time=yes --with-default-libstdcxx-abi=new --enable-gnu-unique-object --disable-vtable-verify --enable-libmpx --enable-plugin --with-system-zlib --disable-browser-plugin --enable-java-awt=gtk --enable-gtk-cairo --with-java-home=/usr/lib/jvm/java-1.5.0-gcj-5-amd64/jre --enable-java-home --with-jvm-root-dir=/usr/lib/jvm/java-1.5.0-gcj-5-amd64 --with-jvm-jar-dir=/usr/lib/jvm-exports/java-1.5.0-gcj-5-amd64 --with-arch-directory=amd64 --with-ecj-jar=/usr/share/java/eclipse-ecj.jar --enable-objc-gc --enable-multiarch --disable-werror --with-arch-32=i686 --with-abi=m64 --with-multilib-list=m32,m64,mx32 --enable-multilib --with-tune=generic --enable-checking=release --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=x86_64-linux-gnu Thread model: posix gcc version 5.3.1 20160225 (Ubuntu 5.3.1-10ubuntu2) Change-Id: Iffbebfbb625e8831822ec092bea88dea42f12930 Signed-off-by: Jean-Mickael Guerin <jean-mickael.guerin@6wind.com>
2016-03-10More updated match to ENIC PMD for DPDK 2.2.0 including rx path optimization.John Lo2-14/+1366
Change-Id: I756940c9c1b2bb71d47caeb08ab34a2e954ddff6 Signed-off-by: John Lo <loj@cisco.com>
2016-02-26Fix ENIC PMD not sending the first packet on TX.John Lo1-0/+26
Change-Id: I615e9ca6f445092baa211098eb64f9553dd4c407 Signed-off-by: John Lo <loj@cisco.com>
2016-02-26Fix link bonding PMD slave status polling path used by VIC ENIC driver.John Lo1-0/+34
Change-Id: Ic9fc952b618477beb246974b33d753bf6fd47dde Signed-off-by: John Lo <loj@cisco.com>
2016-02-25Add support of Ethernet link bonding utilizing DPDK link bondingJohn Lo1-2/+2
poll mode driver library. The bonded interfaces to be created on VPP startup is specified in the dpdk section of startup.conf or qn.conf, using DPDK EAL command. Following is an example of a dpdk section white listing PCI addressses of 4 ethernet interfacess to be under VPP control plus two bonded interface and the PCI addresses of the slaves in each: dpdk { socket-mem 1024,1024 dev 0000:0f:00.0 dev 0000:10:00.0 dev 0000:11:00.0 dev 0000:12:00.0 vdev eth_bond0,mode=2,slave=0000:0f:00.0,slave=0000:11:00.0,xmit_policy=l34 vdev eth_bond1,mode=2,slave=0000:10:00.0,slave=0000:12:00.0,xmit_policy=l34 } Note that only balance XOR (mode 2) is supported and "xmit_policy=l34" specifies to use layer 3 SIP/DIP and layer 4 Sport/Dport for load balance. Using "xmit_policy=l2" for SMAC/DMAC or "xmit_policy=l23" for SMAC/DMAC and SIP/DIP should also work. Change-Id: Iaf6438686fa20cce893cb5a823b76e2886b4360b Signed-off-by: John Lo <loj@cisco.com>
2016-02-22dpdk: fix enic pmd driver tx functionYoann Desmouceaux1-0/+28
Adding a patch to fix DPDK 2.2.0 enic PMD driver TX function. The enic PMD driver send function uses a constant offset instead of relying on the data_off in the mbuf to find the start of the packet. Change-Id: Ic4f3be83865367306785a57e2694e0ccfa295c7b Signed-off-by: Yoann Desmouceaux <ydesmouc@cisco.com>
2016-02-19dpdk: fix enic pmd driver tx functionYoann Desmouceaux1-0/+28
Adding a patch to fix DPDK enic PMD driver TX function. The enic PMD driver send function uses a constant offset instead of relying on the data_off in the mbuf to find the start of the packet. Change-Id: I74dbcce949f08e39070a369d992a90586af140a6 Signed-off-by: Yoann Desmouceaux <ydesmouc@cisco.com>
2016-02-13Increase number of dpdk lcores to 256Damjan Marion1-0/+1
Change-Id: Ia0e228d02fd9f180ed9ca468074ab38d575e415e Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-02-09Disable EAL message spew which can easily fill /var/logDave Barach1-0/+26
Change-Id: I63da892d1c4148a54ea33c172986c854932beb01 Signed-off-by: Dave Barach <dave@barachs.net>
2016-02-05DPDK patch: Add missing init of packet_type field.Todd Foggoa1-0/+70
This can cause packets to be mishandled in systems with more than one type of driver in use. Change-Id: I73ae91ff5d7a22fa542c3b39f6ccfe50437ec71b Signed-off-by: Todd Foggoa <tfoggoa@cisco.com>
2016-02-05DPDK patch: Allow applications to override rte_delay_us()Todd Foggoa1-0/+43
Some applications may wish to define their own implentation of usec delay other than the existing blocking one. The default behavior remains unchanged. Change-Id: I699b2ed460763492502d22b7e8532514e0886ecd Signed-off-by: Todd Foggoa <tfoggoa@cisco.com>
2016-02-05DPDK patch: Fix a crash in igb_uio driver when the device is removed.Todd Foggoa1-0/+33
Change-Id: I101166ebda1c06e20a3c89cd38786ce44b7ab5d5 Signed-off-by: Todd Foggoa <tfoggoa@cisco.com>
2016-02-02Change default dpdk version to 2.2Damjan Marion1-1/+1
Change-Id: Iea686ed26d37539d60e52ac1205517512091edab Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-02-01remove igb_uio static pci id table patch, use new_id for all NICsDamjan Marion1-49/+0
Change-Id: I1db64d62c19c28b50f58f9d0b009e3e89e331f71 Signed-off-by: Damjan Marion <damarion@cisco.com>
2015-12-16Introduce support for DPDK 2.2Damjan Marion6-3/+287
Change-Id: Id2c7c4a949363a448a6715463dd81f701f046b93 Signed-off-by: Damjan Marion <damarion@cisco.com>
2015-12-08Initial commit of vpp code.v1.0.0Ed Warnicke10-0/+654
Change-Id: Ib246f1fbfce93274020ee93ce461e3d8bd8b9f17 Signed-off-by: Ed Warnicke <eaw@cisco.com>