vpp - Vector Packet Processing

Age	Commit message (Expand)	Author	Files	Lines
2016-03-10	More updated match to ENIC PMD for DPDK 2.2.0 including rx path optimization.	John Lo	2	-14/+1366
2016-02-26	Fix ENIC PMD not sending the first packet on TX.	John Lo	1	-0/+26
2016-02-26	Fix link bonding PMD slave status polling path used by VIC ENIC driver.	John Lo	1	-0/+34
2016-02-25	Add support of Ethernet link bonding utilizing DPDK link bonding	John Lo	1	-2/+2
2016-02-22	dpdk: fix enic pmd driver tx function	Yoann Desmouceaux	1	-0/+28
2016-02-19	dpdk: fix enic pmd driver tx function	Yoann Desmouceaux	1	-0/+28
2016-02-13	Increase number of dpdk lcores to 256	Damjan Marion	1	-0/+1
2016-02-09	Disable EAL message spew which can easily fill /var/log	Dave Barach	1	-0/+26
2016-02-05	DPDK patch: Add missing init of packet_type field.	Todd Foggoa	1	-0/+70
2016-02-05	DPDK patch: Allow applications to override rte_delay_us()	Todd Foggoa	1	-0/+43
2016-02-05	DPDK patch: Fix a crash in igb_uio driver when the device is removed.	Todd Foggoa	1	-0/+33
2016-02-02	Change default dpdk version to 2.2	Damjan Marion	1	-1/+1
2016-02-01	remove igb_uio static pci id table patch, use new_id for all NICs	Damjan Marion	1	-49/+0
2015-12-16	Introduce support for DPDK 2.2	Damjan Marion	6	-3/+287
2015-12-08	Initial commit of vpp code.v1.0.0	Ed Warnicke	10	-0/+654

# Copyright (c) 2016 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. *** Settings *** | Resource | resources/libraries/robot/default.robot | Resource | resources/libraries/robot/bridge_domain.robot | Resource | resources/libraries/robot/testing_path.robot | Resource | resources/libraries/robot/qemu.robot | Library | resources.libraries.python.Trace | Force Tags | HW_ENV | VM_ENV | Test Setup | Set up functional test | Test Teardown | Tear down functional test | Documentation | *L2 bridge-domain test cases* | ... | ... | *[Top] Network Topologies:* TG=DUT1=DUT2=TG 3-node circular topology | ... | with double parallel links. | ... | *[Enc] Packet Encapsulations:* Eth-IPv4-ICMPv4 for L2 switching of | ... | IPv4; Eth-IPv6-ICMPv6 for L2 switching of IPv6 use. Both apply | ... | to all links. | ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 | ... | bridge-domain (L2BD) switching combined with MAC learning enabled | ... | and Split Horizon Groups (SHG). | ... | *[Ver] TG verification:* Test ICMPv4 (or ICMPv6) Echo Request packets | ... | are sent in both directions by TG on links to DUT1 and DUT2; on | ... | receive TG verifies packets for correctness and their IPv4 (IPv6) | ... | src-addr, dst-addr and MAC addresses. | ... | *[Ref] Applicable standard specifications:* *** Variables *** | ${bd_id1}= | 1 | ${bd_id2}= | 2 | ${shg1}= | 3 | ${shg2}= | 4 *** Test Cases *** | TC01: DUT1 and DUT2 with L2BD (MAC learn) and SHG switch between four TG links | | [Documentation] | | ... | [Top] TG=DUT1=DUT2=TG. [Enc] Eth-IPv4-ICMPv4. [Cfg] On DUT1 and \ | | ... | DUT2 configure four i/fs into L2BD with MAC learning and the | | ... | same SHG on i/fs towards TG. [Ver] Make TG verify ICMPv4 Echo | | ... | Req pkts are switched thru DUT1 and DUT2 in both directions and | | ... | are correct on receive; verify no pkts are switched thru SHG | | ... | isolated interfaces. [Ref] | | [Tags] | 3_NODE_DOUBLE_LINK_TOPO | | Given Configure path for 3-node BD-SHG test | ${nodes['TG']} | | ... | ${nodes['DUT1']} | | ... | ${nodes['DUT2']} | | And Set interfaces in 3-node BD-SHG test up | | When Create bridge domain | ${dut1_node} | ${bd_id1} | | And Add interface to bridge domain | ${dut1_node} | ${dut1_to_tg_if1} | | ... | ${bd_id1} | ${shg1} | | And Add interface to bridge domain | ${dut1_node} | ${dut1_to_tg_if2} | | ... | ${bd_id1} | ${shg1} | | And Add interface to bridge domain | ${dut1_node} | ${dut1_to_dut2} | | ... | ${bd_id1} | | And Create bridge domain | ${dut2_node} | ${bd_id2} | | And Add interface to bridge domain | ${dut2_node} | ${dut2_to_tg_if1} | | ... | ${bd_id2} | ${shg2} | | And Add interface to bridge domain | ${dut2_node} | ${dut2_to_tg_if2} | | ... | ${bd_id2} | ${shg2} | | And Add interface to bridge domain | ${dut2_node} | ${dut2_to_dut1} | | ... | ${bd_id2} | | Then Send ICMPv4 bidirectionally and verify received packets | ${tg_node} | | ... | ${tg_to_dut1_if1} | | ... | ${tg_to_dut2_if1} | | And Send ICMPv4 bidirectionally and verify received packets | ${tg_node} | | ... | ${tg_to_dut1_if1} | | ... | ${tg_to_dut2_if2} | | And Send ICMPv4 bidirectionally and verify received packets | ${tg_node} | | ... | ${tg_to_dut1_if2} | | ... | ${tg_to_dut2_if1} | | And Send ICMPv4 bidirectionally and verify received packets | ${tg_node} | | ... | ${tg_to_dut1_if2} | | ... | ${tg_to_dut2_if2} | | And Run Keyword And Expect Error | ICMP echo Rx timeout | | ... | Send ICMPv4 bidirectionally and verify received packets | | | ... | ${tg_node} | ${tg_to_dut1_if1} | | | ... | ${tg_to_dut1_if2} | | And Run Keyword And Expect Error | ICMP echo Rx timeout | | ... | Send ICMPv4 bidirectionally and verify received packets | | | ... | ${tg_node} | ${tg_to_dut2_if1} | | | ... | ${tg_to_dut2_if2}