Age | Commit message (Collapse) | Author | Files | Lines |
|
Change-Id: Ibd5cbbdfb22a235442cddaebc9eae9a3c4e35ec9
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I3c04956400a2e88d331f43d1b4865ee2c75e7bc9
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
As well as a rewrite of the encoders/decoders to make it more readable and extensible.
(Re-commit after fix to verify build.)
Change-Id: Ic244d3cebe070bb2570491f8a24f4a1e203f889a
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
This reverts commit a5ee900fb75201bbfceaf13c8bc57a13ed094988.
Some of the unit tests breaks. Backing out until fixed.
Change-Id: I1846fb417db44a2a772f7b59cda8bcfe6d39f8c3
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
As well as a rewrite of the encoders/decoders to make it more readable and extensible.
Change-Id: I253369ac76303922bf9c11377622c8974fa92f19
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
MLX DPDK mlx5_glue.so, compiled under RTE_LIBRTE_MLX5_DLOPEN_DEPS,
provides a run-time check for OFED libraries.
To do so, it links with -libverbs -lmlx5 so that the binding could
occur or fail at runtime (see DPDK 59b91be and VPP 59b91be).
However RPM install fails on systems without OFED installed since
RPM spec has an entry "Requires: libmlx5".
To overcome this, exclude such requirement from the spec.
Same applies to mlx4_glue.so, compiled under RTE_LIBRTE_MLX4_DLOPEN_DEPS
Change-Id: I0ff6efc49581104743cc7e5b1f7cdbc1665ce9ba
Signed-off-by: Igor Mikhailov (imichail) <imichail@cisco.com>
|
|
Change-Id: Icf1a30c9df4d3298407c00383020debe99acdbff
Signed-off-by: Thomas F Herbert <therbert@redhat.com>
|
|
JIRA: VPP-1227
Remove rpm tmp dir build debuginfo rpms.
Reverses commits to fix a build problem with old versions of rpmbuild
that prevented builds in chrooted environments with short paths
and short project names.
Change-Id: I852696dccc984bf4882fd3ca9ec4c8da080bdb41
Signed-off-by: Thomas F Herbert <therbert@redhat.com>
|
|
JIRA: VPP-1229
Subunit and Subunit-devel in Fedora and Epel but not Centos.
This patch moves the Fedora from the Centos specific requirements.
Change-Id: I093a4571cddf14af5ee2827ba8ee00c7bcbe6fc0
Signed-off-by: Thomas F Herbert <therbert@redhat.com>
|
|
Although mbedtls is in Fedora and Epel, it is not
in Centos yet. It is not strictly necessary for TLS
which also can use openssl.
Change-Id: Id62d52000f9ecda2fc10d1938f02be1142fa5bdb
Signed-off-by: Thomas F Herbert <therbert@redhat.com>
|
|
Update RPM spec to know about it
Change-Id: I61c7c1ce96071e3b84d792c18ff8880217b14fce
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Only run semodule command on hosts where selinux
is enabled.
Change-Id: I7bcfc758e44bb0f41ec657ad395352ddb92766eb
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
When building plugins outside of the VPP tree, the vppapigen
tool requires the use of the C.py / JSON.py code. To that end,
install it in /usr/share/vpp as referenced.
Change-Id: I457d58e7bde7140c7811fa0a93b4f44d1310784a
Signed-off-by: Jon Loeliger <jdl@netgate.com>
|
|
Add an SELinux profile such that VPP can run under SELinux on RPM based
platforms. The SELinux Policy is currently only implemented for RPM
packages, specifically, Fedora, CentOS and RHEL. Doxygen User
Documentation has been included (selinux_doc.md). Once some discussion
on file locations has completed (see vpp-devlist), updates to the Debug
CLI documentation will also need to be updated.
Additional changes:
Patch Set 2:
- Rework selinux_doc.md such that each line is only 80 characters
instead of each sentence on a line. Made additonal minor chnages
to the text.
- Update vHost Debug CLI documentation to reflex new socket location.
Cleaned up some text from when I originally wrote it, to better
reflex proper use.
- Update exec Debug CLI documentation to be more inline with suggested
helptext, added text regarding recommended script file location.
- For Debian builds, create the /var/log/vpp/ directory. I don't use
Debian very much, so please pay extra attention to
build-data/platforms.mk and build-root/deb/debian/.gitignore.
- Per discussion on VPP call, changed the default log location to
/var/log/vpp/vpp.log.
- Changed the socket location for vHost in AutoConfig to
/var/run/vpp/.
Patch Set 3:
- Update selinux_doc.md based on comments.
Change-Id: I400520dc33f1ca51012d09ef8fe5a7b7b96c631e
Signed-off-by: Billy McFall <bmcfall@redhat.com>
|
|
This is a version of the VPP API generator in Python PLY. It supports
the existing language, and has a plugin architecture for generators.
Currently C and JSON are supported.
Changes:
- vl_api_version to option version = "major.minor.patch"
- enum support
- Added error checking and reporting
- import support (removed the C pre-processor)
- services (tying request/reply together)
Version:
option version = "1.0.0";
Enum:
enum colours {
RED,
BLUE = 50,
};
define foo {
vl_api_colours_t colours;
};
Services:
service {
rpc foo returns foo_reply;
rpc foo_dump returns stream foo_details;
rpc want_stats returns want_stats_reply
events ip4_counters, ip6_counters;
};
Future planned features:
- unions
- bool, text
- array support (including length)
- proto3 output plugin
- Refactor C/C++ generator as a plugin
- Refactor Java generator as a plugin
Change-Id: Ifa289966c790e1b1a8e2938a91e69331e3a58bdf
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
dpdk_plugin.so depends on libnuma.so.1
Change-Id: Ia1fd3b5cec043b294cc14cd947908675b451deac
Signed-off-by: Gabriel Ganne <gabriel.ganne@enea.com>
|
|
* Remove unused variable OS_VERSION_ID
* Do all RPM building in build-root/rpmbuild
* Add build-root/rpmbuild to .gitignore
* Move redundant code to a target called 'spec'
* Copy spec file to SPECS instead of SOURCES
* Only set %{_topdir} macro when it's undefined, and because of that
remove sed call to delete definition on spec file
* Pass _version and _release using --define parameter instead of using
sed to add them to .spec
* Move rpm files to build-root after build finishes
* Add dist tarball to .gitignore
Change-Id: I230d60b62914056b353f7f8701d14754b0bf7f8c
Signed-off-by: Renato Botelho do Couto <renato@netgate.com>
|
|
This patch addresses two things:
1) It simplifies the Makefile to build RPMs by removing duplication and
use environment variables instead;
2) It aligns openSUSE with others with regards to invoke "pkg-rpm" by
the build.sh for Vagrant
Change-Id: I51557f54e4ddf49d83bb69fa0035c8fff122857e
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
Change-Id: Ic26edd34a2980fc8cf34514433a7b7076660316e
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
Remove fedora dependency restriction on subunit and subunit-devel packages.
libsunit is only called in test/ext/Makefile on all platforms safe opensuse.
Change-Id: I483f42f20f6ba8bd112c18a9c51753a5d816d1c1
Signed-off-by: Gabriel Ganne <gabriel.ganne@enea.com>
Signed-off-by: Romain Ly <romain.ly@enea.com>
|
|
Change-Id: I1f76aabecfd7d33b924a4856a4c3fc683b9b8802
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
As not all distros have the minimum required nasm version (2.12.01)
available, build nasm from sources when building Intel IPsec MB library.
Change-Id: Iaa9da87f612c0f84da5704162c3bf430b3351076
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
|
|
Fixes bug introduced in commit 5349f94d.
JIRA: VPP-1014
Change-Id: Ia18f4c6f5f1124306cce790a36f6de970d186687
Signed-off-by: Thomas F Herbert <therbert@redhat.com>
(cherry picked from commit 8c5bfbcc09f44f3ed2b87b0b5c257fbb7b735f97)
|
|
Deps are required for Fedora too.
This patch is merged in version stable/17.10.
It should also be merged in master because it
fixes breaking rpm builds in some circumstances.
JIRA: VPP-1015
Cherry-picked from stable/1710
Change-Id: I10807069742cdd6b09a0f34d9d05e9cae4146ec3
Signed-off-by: Thomas F Herbert <therbert@redhat.com>
|
|
This patch adds a new spec file for SUSE distribution and modifies the
Makefile to learn which platform is building the RPMs for.
Change-Id: Ic8ee0ddf978042cc1785ebc28bd1a6c9faf9bb74
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
JIRA VPP-498
This commit is a fix so downstream builds in Centos and
RHEL mock environment will work. This is a workaround
for a bug in the debugedit code in rpm-build package 4.13
and earlier.
Change-Id: Ia6361f7487c5afe9948a2d2fe929942ba5b9c0f1
Signed-off-by: Thomas F Herbert <therbert@redhat.com>
|
|
This is just a workaround until VPP is compatible with OpenSSL 1.1.
JIRA: VPP-569
Change-Id: I8d2a113dc9400fd7e8e6850de5d91f40380455ce
Signed-off-by: Thomas F Herbert <therbert@redhat.com>
|
|
Changed the %config to %config(noreplace) for the two files in the
vpp.spec file that use it, 80-vpp.conf and startup.conf. Any local
changes to these files will now remain. If a newer version of the file
is published, the new version will be copied over as {filename}.rpmnew,
and the changes will not be applied without manual intervention.
Change-Id: I00b2c7abca20bc33f82479374dd184fc57a9abc5
Signed-off-by: Billy McFall <bmcfall@redhat.com>
|
|
JIRA VPP-498
This patch also allows RPMs to be built without multi-
buffer crypto for some RPM based downstream distros that
don't have sufficiently new nasm or don't have an USA
export license for multi-buffer crypto.
The default is to build WITH multi-buffer crypto
for x86-64. This patch allows optional building without
multi-buffer crypto.
To build without multi-buffer crypto, set the AESNI
environment variable to n.
To build rpm packages without multi-buffer crypto,
build the rpms with the option turned off.
make build AESNI=n
or..
make pkg-rpm --without aesni
---How to test this patch on a Centos build.---
Build as above and verify that nasm isn't executed during
the build process.
vpp may be installed and the dpdk plugin may be inspected to
verify that the multi-buffer code isn't present.
Change-Id: I8c5cfd4cdd9eb2b96772a687eaa54560806e001b
Signed-off-by: Thomas F Herbert <therbert@redhat.com>
|
|
JIRA: VPP-498
Changes to build to help with downstream distro builds
for Fedora, Centos and RHEL distros.
Add nasm, automake, libtool, byacc, bison and flex.
Remove libconfuse and dependencies.
Remove epel-release rpm and dependencies.
Add conditionals to work around Python 2 packaging
inconsistency in Fed 25.
Add numactl to rpm requirements.
Change-Id: Ia39f8b931dc87e42df56414d38662eb33c7a4ca7
Signed-off-by: Thomas F Herbert <therbert@redhat.com>
|
|
Use actual file name for tarball.
Includes required modifications in spec file for unpacking srpm.
Spec file source references actual dist tarball name
so it matches the revision and release while building from srpm.
JIRA: VPP-498
Change-Id: I8b55a69f060b7864527b94d8c5b0a2ebccc306b1
Signed-off-by: Thomas F Herbert <therbert@redhat.com>
|
|
This change is necessary to avoid breaking builds from source rpm.
JIRA: VPP-498
Change-Id: I876572ff75f88e22bf8012cabb1bde7e6d3c925a
Signed-off-by: Thomas F Herbert <therbert@redhat.com>
|
|
in %postun part and not call sysctl when VPP package is
upgrading provide by condition for sysctl --system
in %post part.
Change-Id: I549803864699e4a81cf589befe296d585e1c6d2b
Signed-off-by: Kristina Nevolnikova <knevolnikova@frinx.io>
|
|
specfile to reflect the proper license.
Change-Id: I9e8d1643ea65afd91a0cd5ad9545248575e32617
Signed-off-by: Billy McFall <bmcfall@redhat.com>
(cherry picked from commit 01d2b4b13ad719934e1e6999f9ed6c7c36a815ff)
|
|
Change-Id: I3935b3f312852e0f032c48726651561fb8616273
Signed-off-by: Igor Mikhailov (imichail) <imichail@cisco.com>
|
|
Change-Id: If2f9976d668089026c97b897cf449bff09050631
Signed-off-by: Damjan Marion <damarion@cisco.com>
|