Age | Commit message (Collapse) | Author | Files | Lines |
|
- Updated/rebased version of https://gerrit.fd.io/r/c/vpp/+/34199
Type: test
Change-Id: I43913ecfd11a4578bdb10c4be76253fe38d57976
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
Type: test
Change-Id: Ica211c79373777c3352d6ccbb619c0d67b70fa06
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Type: test
Change-Id: I1745719315d4e0785df5a03aa4312f84c40cb18f
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Type: test
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Change-Id: Ieb6e46439d8e66a792f9c508e7dc49ecdd392487
|
|
Type: test
This application creates two memif interfaces which connect
to an external application i.e. VPP.
Usage:
1) Start VPP with following config.
create interface memif id 0 master
create interface memif id 1 master
set int state memif0/0 up
set int state memif0/1 up
create packet-generator interface pg0
set int state pg0 up
create packet-generator interface pg1
set int state pg1 up
set int l2 xconn pg0 memif0/0
set int l2 xconn memif0/0 pg0
set int l2 xconn pg1 memif0/1
set int l2 xconn memif0/1 pg1
packet-generator new { \
name memif \
limit -1 \
node ethernet-input \
size 64-64 \
interface pg0 \
worker 0 \
data { \
IP4: 42:01:0a:00:00:0a -> 02:fe:4b:6e:4d:c1 \
UDP: 172.16.2.2 -> 172.16.0.2 \
UDP: 1234 -> 1234 \
length 30 checksum 0 incrementing 1 \
} \
}
2) Compile and Run the test_app in another terminal.
mkdir -p extras/libmemif/build
cd extras/libmemif/build
cmake ..
make
sudo ./examples/test_app
3) Run in VPP cli
vpp# packet enable
4) Run monitor to see the throughput and pps
vpp# monitor interface memif0/0
Or
vpp# monitor interface memif0/1
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: I4b9062fca8ad3020225adb7b1b09e5d66b1a7d48
|
|
Type: test
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Change-Id: I3e543cb292c7ed0f9d240f8f2473a1db07aff0fd
|
|
Type: test
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Change-Id: Ie90e4b02c268bc3ca40171b03829f5686fb83162
|
|
In some cases with Generic FLow, it is only required to show the pattern
of spec and mask, but no need to add the flow. Therefore, add an option
in packetforge so that users can show spec and mask only.
Type: improvement
Signed-off-by: Ting Xu <ting.xu@intel.com>
Change-Id: I7b3040689eb82d0b58924712ee6fc9cfa0a42fa1
|
|
Type: make
Change-Id: I8983778b4c2f5123b27aeeb1fdc4721c8e9c9160
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
Type: test
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Change-Id: I55731fa546df01ac4bd327b444ac1a5c2052bed1
|
|
This patch add in missing src/dst port assignment in SA for udp port
if encap.
Type: fix
Signed-off-by: Gabriel Oginski <gabrielx.oginski@intel.com>
Change-Id: I84219c016c5a32590aba0371c01ad8d44cbf4c5c
|
|
Type: fix
Signed-off-by: Koki Kiriyama <kiriyama.kk@gmail.com>
Change-Id: I47c4c91aa6f973bd93dca352f470642e90aa70e0
|
|
Apache ab sometimes fails during extensive performace testing.
This patch makes sure hs-test perf tests always pass.
Type: test
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Change-Id: I0921682f0f07df3af45b342b9a7ddfa1af037ceb
|
|
Type: test
Change-Id: I90faed91639ce1792646531cfc0cac649d737f16
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Type: test
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Change-Id: I66af84257fa0692d9be3445d49b52fb7ca810d27
|
|
Type: test
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Change-Id: I56c57de180e44c888458e4f4020802ce9b4a6b8b
|
|
Type: test
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Change-Id: I967e91e4ea97edff427013c92376b388d6ce5d85
|
|
Exported indentifiers in Go start with capital letters. Only few fields
in hs-test, which are being unmarshaled from yaml are required to be
exported. Every other field name or method name should start with
lower-case letter, to be consistent with this naming convention.
Type: test
Signed-off-by: Maros Ondrejicka <mondreji@cisco.com>
Change-Id: I7eab0eef9fd08a7890c77b6ce1aeb3fa4b80f3cd
|
|
Type: test
Signed-off-by: Maros Ondrejicka <mondreji@cisco.com>
Change-Id: I6444582ce83beddc5cb2fcb31942a4c2e9556bb6
|
|
- Skip addition of docker apt source/key if
already installed.
Type: fix
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: I747e4dd5e79e23b64e6eb11c6a9348e2ae1a157f
|
|
Type: fix
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: I449cd4ad71e33a2dd41e53accc6b325803a32c70
|
|
Type: test
Add a helper wrapper script for vppctl called vppcli to vpp docker image
with proper cli socket path.
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Change-Id: I1a51aa54bc91c1c812698501a56401c525d498e8
|
|
Type: test
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Change-Id: I776e0f1f7ea700439d1fe6a598772776ae6a1493
|
|
- avoid setting LD_PRELOAD for container
- save nginx error log to shared volume
- reduce test run time to 10s
- add vcl and ldp debug env variables to docker file. Default to
disabled.
Type: test
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I401ac74e7c0ebe87befedb44150b04f773f244ea
|
|
SElinux added support for defining what files can be mmap()'d a while back.
This change defines those files that VPP maps.
This is needed for EL9 support
Type: fix
Signed-off-by: Christian Svensson <blue@cmd.nu>
Change-Id: Iedd26914e29347169c4cc138628df7823ddd5691
|
|
Currently only RHEL/CentOS 8 and Fedora are supported.
EL9 is a middle ground and thus require some different dependencies.
Type: feature
Signed-off-by: Christian Svensson <blue@cmd.nu>
Change-Id: I7be79e61994800bb796d4e9141f0ff6ad8bdead2
|
|
Type: test
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Change-Id: I6e03b88ca013cafd73f424ea63f706f105bebe6b
|
|
This patch fix the memory leaks discovered in the current
implementation, inlcuding expired data, spd dump, and host names.
Type: fix
Signed-off-by: Gabriel Oginski <gabrielx.oginski@intel.com>
Change-Id: I3794f5db3c58d1e78df25f242c91e7a67363de53
|
|
Type: docs
Fixes: 33909777c637 ("misc: unify pcap rx / tx / drop trace")
Signed-off-by: Nobuhiro MIKI <nmiki@yahoo-corp.jp>
Change-Id: I049616cfad300658e62e5026c0655ee6f07a2421
|
|
Type: docs
Signed-off-by: Maros Ondrejicka <mondreji@cisco.com>
Change-Id: I123898923afa382ff0d4410652f4a17a8740d711
|
|
Type: test
Signed-off-by: Maros Ondrejicka <mondreji@cisco.com>
Change-Id: I445f5357817fceeb9b5ead01c3530edaae45189a
|
|
Type: improvement
Since VPP-SWAN does not really need StrongSwan to be compiled,
this patch refines the Makefile to reflect the change.
In addition README is updated.
Signed-off-by: Fan Zhang <fanzhang.oss@gmail.com>
Change-Id: I185957167ac71a44f4d12e78e1dac31c194f80f4
|
|
After gerrit 38370 (729b9c94), apps are registered via ldp using program
name. Update tests to support that.
Also add make file help for UNCONFIGURE.
Type: test
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I4ad50abfd175664b47b358df1a72e0758f51190d
|
|
Treat certain configuration files, which contain runtime-dependent
information, as templates. The information is filled at runtime and the
files are copied into containers.
This allows to avoid hard-coding IP addresses into configuration files.
Type: test
Signed-off-by: Maros Ondrejicka <mondreji@cisco.com>
Change-Id: I1dae8f15f4f76c0bf1779d7c68b7f3859bf5a861
|
|
Type: test
Signed-off-by: Maros Ondrejicka <mondreji@cisco.com>
Change-Id: I84209e6d2c914d1c7b9dec7efc3898b75552db1b
|
|
Type: test
Signed-off-by: Maros Ondrejicka <mondreji@cisco.com>
Change-Id: I05bbed8fd9d40929f040574044aed5292a475e91
|
|
Adding `UNCONFIGURE=true` argument when running `make test` will skip
test run and unconfigure existing topology for that test.
Type: test
Signed-off-by: Maros Ondrejicka <mondreji@cisco.com>
Change-Id: I197747a56ca68807f0b2c3f25b6f61c3dcc41ace
|
|
This joins separate representations of veth and tap interfaces
into a single struct. It removes the need for type interface
and embedding which simplifies the code.
Type: test
Signed-off-by: Maros Ondrejicka <mondreji@cisco.com>
Change-Id: I1b2c368bfe90a5bdfaaa9a5129c27d7d96f8fe3b
|
|
This patch adds a missing file descriptor free handler to prevent
invalid dereferencing in the future
Type: fix
Signed-off-by: Gabriel Oginski <gabrielx.oginski@intel.com>
Change-Id: Idc809a70b1fedec9a06446344d5481d467c78c19
|
|
Type: test
Signed-off-by: Maros Ondrejicka <mondreji@cisco.com>
Change-Id: I50ad5d8c2e5066d8d24f7959aeb534a2f0a6fae0
|
|
This will make name of the test unique so that executing specifically
this test won't execute also other tests starting with same name.
Type: test
Signed-off-by: Maros Ondrejicka <mondreji@cisco.com>
Change-Id: I8013aa453c2a1c3c156e6476a93fd58bbb850b93
|
|
- add support for building/running debug/release images
- have one point of control (Makefile)
- list all test cases
Type: test
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Change-Id: I97949abc2fff85d7a2b3784122be159aeec72b52
|
|
Type: test
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: I9c59d98d16e387925057626ba9080210f4334c53
|
|
Type: test
Signed-off-by: Maros Ondrejicka <mondreji@cisco.com>
Change-Id: I74c505920d1363d0ff2b3213fd831c181b70a173
|
|
Type: test
Signed-off-by: Maros Ondrejicka <mondreji@cisco.com>
Change-Id: I08cd492fff4b9d50a1761a29c2b231cc8544313b
|
|
Type: test
Signed-off-by: Maros Ondrejicka <mondreji@cisco.com>
Change-Id: I52cd825f903e41c35f6c4a9db71f00dbedbb8680
|
|
The current implementation of vpp-swan plugin adds the same policy rule
in SPD twice, and it is not necessary to have two the same rules in
inbound-protect database.
This patch fixes an issue that prevents the addition of a second
identical policy rule in SPD.
Type: fix
Signed-off-by: Gabriel Oginski <gabrielx.oginski@intel.com>
Change-Id: Ieef74288e5301455658e4e101433147d6d2482e9
|
|
This converts remaining tests to configation of VPP from test context.
Type: test
Change-Id: I386714f6b290e03d1757c2a033a25fae0340f5d6
Signed-off-by: Maros Ondrejicka <mondreji@cisco.com>
|
|
This converts more tests to configure VPP from test context.
Type: test
Signed-off-by: Maros Ondrejicka <maros.ondrejicka@pantheon.tech>
Change-Id: Idf26b0c16f87e87c97b198412af39b99d947ced6
|
|
Instead of configuring VPP instances running inside of a container,
now the configuration is going to be done from within the test context
by using binary API and shared volume that exposes api socket.
This converts just some of the test cases, rest is to follow.
Type: test
Signed-off-by: Maros Ondrejicka <maros.ondrejicka@pantheon.tech>
Change-Id: I87e4ab15de488f0eebb01ff514596265fc2a787f
|