Age | Commit message (Collapse) | Author | Files | Lines |
|
This reverts commit a5ee900fb75201bbfceaf13c8bc57a13ed094988.
Some of the unit tests breaks. Backing out until fixed.
Change-Id: I1846fb417db44a2a772f7b59cda8bcfe6d39f8c3
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
As well as a rewrite of the encoders/decoders to make it more readable and extensible.
Change-Id: I253369ac76303922bf9c11377622c8974fa92f19
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Change-Id: I0a1fc36ac29f6da70334ea3b5a5cf0e841faef76
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Change-Id: I151bc4269cb4d7e8572a6a676da20f69206d6c3f
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
- use types on the DHCP API so that the same data is sent in comfing messages and in dumps
- add the DHCP client dump API
- update VOM to refelct API changes
- rename VOM class dhcp_config* dhcp_client*
- the VOM dhcp_client class maintains the lease data (which it reads on a dump) for clients to read
Change-Id: I2a43463937cbd80c01d45798e74b21288d8b8ead
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
Change-Id: Id97de732b5952d5d86202e7749c9e81cf8dbed87
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
Change-Id: I8335ebf266becf2f42bb3f28a17dfed8d9b08f97
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
MLX DPDK mlx5_glue.so, compiled under RTE_LIBRTE_MLX5_DLOPEN_DEPS,
provides a run-time check for OFED libraries.
To do so, it links with -libverbs -lmlx5 so that the binding could
occur or fail at runtime (see DPDK 59b91be and VPP 59b91be).
However RPM install fails on systems without OFED installed since
RPM spec has an entry "Requires: libmlx5".
To overcome this, exclude such requirement from the spec.
Same applies to mlx4_glue.so, compiled under RTE_LIBRTE_MLX4_DLOPEN_DEPS
Change-Id: I0ff6efc49581104743cc7e5b1f7cdbc1665ce9ba
Signed-off-by: Igor Mikhailov (imichail) <imichail@cisco.com>
|
|
Change-Id: I4f245fd225bcc563fafee2696cd039477d661c57
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
Change-Id: I8f41c659c6f50efd679a56878c6fdcf426ac9410
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
Change-Id: I7b9d28a940e0d7c4a4acda3f4048261c67bf49ff
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Change-Id: Icf1a30c9df4d3298407c00383020debe99acdbff
Signed-off-by: Thomas F Herbert <therbert@redhat.com>
|
|
Change-Id: Ide4e2d2a06dff20c94ae5436ba6361b246052867
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: Iea174f03dfba3bd06024db0f0cc373532300dcae
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: If830dc0c8171b14c8a686db899885e26628a6f91
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
- Notes for the 18.04 release
- Fixes for table layout of previous API summary
- Update list_api_changes.py script
Change-Id: Id99ed4df2e76e2704f949ee940eedf9ede7e8f4b
Signed-off-by: Chris Luke <chrisy@flirble.org>
(cherry picked from commit ac2b7363f437afedd100162c901b5d03cb37a34a)
|
|
Change-Id: Icdeaad1d5df63bd5e9426958a3b73582bbd226b7
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
- Add Ole Troan's script from vpp-dev email:
https://lists.fd.io/pipermail/vpp-dev/2017-October/007037.html
Change-Id: I0cbf5118169dc25f0edd659a5a9f5cde8619f780
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
(cherry picked from commit b0a517b6c881ad82ac15e52e832056314216058d)
|
|
Change-Id: I09444281a932d367162a10b90c3759db71c03350
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
JIRA: VPP-1227
Remove rpm tmp dir build debuginfo rpms.
Reverses commits to fix a build problem with old versions of rpmbuild
that prevented builds in chrooted environments with short paths
and short project names.
Change-Id: I852696dccc984bf4882fd3ca9ec4c8da080bdb41
Signed-off-by: Thomas F Herbert <therbert@redhat.com>
|
|
JIRA: VPP-1229
Subunit and Subunit-devel in Fedora and Epel but not Centos.
This patch moves the Fedora from the Centos specific requirements.
Change-Id: I093a4571cddf14af5ee2827ba8ee00c7bcbe6fc0
Signed-off-by: Thomas F Herbert <therbert@redhat.com>
|
|
Although mbedtls is in Fedora and Epel, it is not
in Centos yet. It is not strictly necessary for TLS
which also can use openssl.
Change-Id: Id62d52000f9ecda2fc10d1938f02be1142fa5bdb
Signed-off-by: Thomas F Herbert <therbert@redhat.com>
|
|
use api_helper_macros.h
declare plugin_main_t external in the header file
declare plugin_main_t instance in plugin.c
setup main_t->vlib_main, main_t->vnet_main in the init routine
Change-Id: Ib8c742a60c63adfe9724447e1a2acc8c7723e90c
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Slave is now able to dequeue buffers from rx queue and enqueue them to tx queue
(zero-copy operation). Slave can produce buffers with headroom, which will allow adding
encap without copy.
Change-Id: Ia189f8de1a68be787545ed46cf78d36403e7e9bf
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
Change-Id: I1ce5106d99dd4d4b1c033d4873b4511e9a170afc
Signed-off-by: John DeNisco <jdenisco@cisco.com>
|
|
Change-Id: I7e808b5bcbb74343a4ed6782f115ed07e9bfe3a6
Signed-off-by: Damjan Marion <damarion@cisco.com>
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
Change-Id: I09567c8ee9c92e91918840f80942a005069d9842
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
Change-Id: Ia2532695aa9199d2a7b684aebef43df0b8235531
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
SELinux is enable
Update the SELinux Policy to allow management of the new vhost-net
backend TAP interface.
Change-Id: I2d0633a7fce2ee2a4d6e0008ab13599647c14f42
Signed-off-by: Billy McFall <bmcfall@redhat.com>
|
|
Change-Id: I6624cacd625eea6a9b8214f67d14ec162e2c0195
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
Change-Id: I105375c653b1a1dce8f0f71005b281ff137c6f42
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Update RPM spec to know about it
Change-Id: I61c7c1ce96071e3b84d792c18ff8880217b14fce
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Change-Id: Ic151be9ff7114c1fdec22d5ad056654960cf12b2
Signed-off-by: John DeNisco <jdenisco@cisco.com>
|
|
Only run semodule command on hosts where selinux
is enabled.
Change-Id: I7bcfc758e44bb0f41ec657ad395352ddb92766eb
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
returning an error when VPP was launched as a service (tested on CentOS 7.3). Adding 'net_admin' to SELinux capabilities for VPP solves the issue.
Change-Id: Icd0529b49adb86e7b371283a6f39af03816951c5
Signed-off-by: Victor Nguyen <victong2@cisco.com>
|
|
Change-Id: I27a59203f406120558f73bfcc12dca8835ae6361
Signed-off-by: John DeNisco <jdenisco@cisco.com>
|
|
Change-Id: I4265fd0606f87f80f43f7f59ced1c3a73de82776
Signed-off-by: Chun Li <chunl2@cisco.com>
|
|
When building plugins outside of the VPP tree, the vppapigen
tool requires the use of the C.py / JSON.py code. To that end,
install it in /usr/share/vpp as referenced.
Change-Id: I457d58e7bde7140c7811fa0a93b4f44d1310784a
Signed-off-by: Jon Loeliger <jdl@netgate.com>
|
|
Add an SELinux profile such that VPP can run under SELinux on RPM based
platforms. The SELinux Policy is currently only implemented for RPM
packages, specifically, Fedora, CentOS and RHEL. Doxygen User
Documentation has been included (selinux_doc.md). Once some discussion
on file locations has completed (see vpp-devlist), updates to the Debug
CLI documentation will also need to be updated.
Additional changes:
Patch Set 2:
- Rework selinux_doc.md such that each line is only 80 characters
instead of each sentence on a line. Made additonal minor chnages
to the text.
- Update vHost Debug CLI documentation to reflex new socket location.
Cleaned up some text from when I originally wrote it, to better
reflex proper use.
- Update exec Debug CLI documentation to be more inline with suggested
helptext, added text regarding recommended script file location.
- For Debian builds, create the /var/log/vpp/ directory. I don't use
Debian very much, so please pay extra attention to
build-data/platforms.mk and build-root/deb/debian/.gitignore.
- Per discussion on VPP call, changed the default log location to
/var/log/vpp/vpp.log.
- Changed the socket location for vHost in AutoConfig to
/var/run/vpp/.
Patch Set 3:
- Update selinux_doc.md based on comments.
Change-Id: I400520dc33f1ca51012d09ef8fe5a7b7b96c631e
Signed-off-by: Billy McFall <bmcfall@redhat.com>
|
|
Fixed bugs.
Improved some config as the result of Tetration experience.
Change-Id: Ie4b8d2d77ca3ad165675c42fa2d9a4798d871f9d
Signed-off-by: John DeNisco <jdenisco@cisco.com>
|
|
Change-Id: I5415c002a431d84372f56d4a77dc2aabd6ef55f7
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
(cherry picked from commit 1eb970d16028e9a987c1dd2bfe217d1313262b81)
|
|
This is a version of the VPP API generator in Python PLY. It supports
the existing language, and has a plugin architecture for generators.
Currently C and JSON are supported.
Changes:
- vl_api_version to option version = "major.minor.patch"
- enum support
- Added error checking and reporting
- import support (removed the C pre-processor)
- services (tying request/reply together)
Version:
option version = "1.0.0";
Enum:
enum colours {
RED,
BLUE = 50,
};
define foo {
vl_api_colours_t colours;
};
Services:
service {
rpc foo returns foo_reply;
rpc foo_dump returns stream foo_details;
rpc want_stats returns want_stats_reply
events ip4_counters, ip6_counters;
};
Future planned features:
- unions
- bool, text
- array support (including length)
- proto3 output plugin
- Refactor C/C++ generator as a plugin
- Refactor Java generator as a plugin
Change-Id: Ifa289966c790e1b1a8e2938a91e69331e3a58bdf
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
dpdk_plugin.so depends on libnuma.so.1
Change-Id: Ia1fd3b5cec043b294cc14cd947908675b451deac
Signed-off-by: Gabriel Ganne <gabriel.ganne@enea.com>
|
|
Change-Id: Ifa9966a27586a1a65038d069cf4a1e6e21a72d45
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
* Remove unused variable OS_VERSION_ID
* Do all RPM building in build-root/rpmbuild
* Add build-root/rpmbuild to .gitignore
* Move redundant code to a target called 'spec'
* Copy spec file to SPECS instead of SOURCES
* Only set %{_topdir} macro when it's undefined, and because of that
remove sed call to delete definition on spec file
* Pass _version and _release using --define parameter instead of using
sed to add them to .spec
* Move rpm files to build-root after build finishes
* Add dist tarball to .gitignore
Change-Id: I230d60b62914056b353f7f8701d14754b0bf7f8c
Signed-off-by: Renato Botelho do Couto <renato@netgate.com>
|
|
This patch addresses two things:
1) It simplifies the Makefile to build RPMs by removing duplication and
use environment variables instead;
2) It aligns openSUSE with others with regards to invoke "pkg-rpm" by
the build.sh for Vagrant
Change-Id: I51557f54e4ddf49d83bb69fa0035c8fff122857e
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
Change-Id: Ic26edd34a2980fc8cf34514433a7b7076660316e
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
Change-Id: I11ef4e7dcf1759eb3545be5db2a7196d1217a6dd
Signed-off-by: Jakub Grajciar <Jakub.Grajciar@pantheon.tech>
|
|
Change-Id: I2ebcb1acb43b4316e3dd48e83909d710dbef4e2f
Signed-off-by: John DeNisco <jdenisco@cisco.com>
|
|
Remove fedora dependency restriction on subunit and subunit-devel packages.
libsunit is only called in test/ext/Makefile on all platforms safe opensuse.
Change-Id: I483f42f20f6ba8bd112c18a9c51753a5d816d1c1
Signed-off-by: Gabriel Ganne <gabriel.ganne@enea.com>
Signed-off-by: Romain Ly <romain.ly@enea.com>
|