summaryrefslogtreecommitdiffstats
path: root/src/configure.ac
AgeCommit message (Collapse)AuthorFilesLines
2018-03-26Disable -Waddress-of-packed-member warnings reported by clangDamjan Marion1-0/+8
Change-Id: Ic07ea5b0a7addec7b0ccfbe0570f341056e6d55b Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-03-26Intel Adaptive Virtual Function native device driver pluginDamjan Marion1-0/+1
Change-Id: If168a9c54baaa516ecbe78de2141f11c17aa2f53 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-03-21bond: Add bonding driver and LACP protocolSteven1-0/+1
Add bonding driver to support creation of bond interface which composes of multiple slave interfaces. The slave interfaces could be physical interfaces, or just any virtual interfaces. For example, memif interfaces. The syntax to create a bond interface is create bond mode <lacp | xor | acitve-backup | broadcast | round-robin> To enslave an interface to the bond interface, enslave interface TenGigabitEthernet6/0/0 to BondEthernet0 Please see src/plugins/lacp/lacp_doc.md for more examples and additional options. LACP is a control plane protocol which manages and monitors the status of the slave interfaces. The protocol is part of 802.3ad standard. This patch implements LACPv1. LACPv2 is not supported. To enable LACP on the bond interface, specify "mode lacp" when the bond interface is created. The syntax to enslave a slave interface is the same as other bonding modes. Change-Id: I06581d3b87635972f9f0e1ec50b67560fc13e26c Signed-off-by: Steven <sluong@cisco.com>
2018-03-19IGMP pluginJakub Grajciar1-0/+1
- host mode: igmp_listen - API to signal that the host has joined an (S,G) - route mode: igmp_enable - API to enable the reception of host IGMP messages igmp_event - API to report the host join/leave from an (S,G) Change-Id: Id180ec27dee617d33ab3088f5dcf6125d3aa9c8f Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2018-03-15tls: add openssl engineFlorin Coras1-0/+7
Change-Id: I6c215858d2c9c620787632b570950b15274c0df2 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-03-14IPIP: Add IP{v4,v6} over IP{v4,v6} configured tunnel support.Ole Troan1-1/+0
Change-Id: I166301c9e2388bae5f70ec0179d663a2703e27f5 Signed-off-by: Ole Troan <ot@cisco.com>
2018-03-10Move the vnet cdp protocol implementation to a pluginDave Barach1-0/+1
Add a binary API and debug cli to enable/disable cdp. cdp is disabled by default. Change-Id: I307c7e38dfda38e36ff3325f65de7036c34d89b1 Signed-off-by: Dave Barach <dave@barachs.net>
2018-03-08tls: make tls engines pluggableFlorin Coras1-3/+13
- add infra for pluggable tls "engines" - makes mbedtls specific code a plugin Change-Id: I2c5b099e2b69d2be0038e3ef02b208ff907727e7 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-03-07VPPAPIGEN: Run tool directly from source tree.Ole Troan1-5/+0
This ensures that tool changes do not require re-bootstrap. Disabled generation of temporary files (gentab / .pyc) to avoid polluting the source tree. Change-Id: I4d6bc035fbb46550fa8f4e99f4091eef90e2d86c Signed-off-by: Ole Troan <ot@cisco.com>
2018-03-06glibc 2.27 fixMarco Varlese1-0/+1
With glibc 2.27 the memfd_create has been added to the devel libraries. That's causing the internally defined static function to clash with the system wide one. This patch addresses that issue on systems with latest glibc libraries. Change-Id: I788bf49b23d5b5f1cb1c0374e243d8a429178a71 Signed-off-by: Marco Varlese <marco.varlese@suse.com>
2018-03-05Set DPDK_MLX4_PMD and DPDK_MLX5_PMD compile with default dlopen linksAmir Zeidner1-22/+0
dlopen linkage allow more transparent use for Mellanox nics. Mellanox shared library librte_pmd_mlx5/4_glue.so* placed in LD_LIBRARY_PATH At run time Mellanox code will be loaded only when Mellanox nics explicty used. i.e if VPP is used with other vendor Mellanox code is not loaded. Change-Id: Ib05bdbfc4cbb6e447c67186c98361f9c5b447140 Signed-off-by: Amir Zeidner <amirzei@mellanox.com>
2018-03-02session: first approximation implementation of tlsFlorin Coras1-0/+11
It consists of two main parts. First, add an application transport type whereby applications can offer transport to other applications. For instance, a tls app can offer transport services to other applications. And second, a tls transport app that leverages the mbedtls library for tls protocol implementation. Change-Id: I616996c6e6539a9e2368fab8a1ac874d7c5d9838 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-02-14VOM: build with plugins disabledNeale Ranns1-3/+3
Change-Id: I1384d16deb3fa38b988dd2fc98f436124e381536 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-02-09GBP pluginNeale Ranns1-0/+1
Group Base Policy (GBP) defines: - endpoints: typically a VM or container that is connected to the virtual switch/router (i.e. to VPP) - endpoint-group: (EPG) a collection of endpoints - policy: rules determining which traffic can pass between EPGs a.k.a a 'contract' Here, policy is implemented via an ACL. EPG classification for transit packets is determined by: - source EPG: from the packet's input interface - destination EPG: from the packet's destination IP address. Change-Id: I7b983844826b5fc3d49e21353ebda9df9b224e25 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-01-29SRv6 dynamic proxy pluginFrancois Clad1-0/+1
Change-Id: Ie460005510b8a70d00de31b6651e762cc3a63229 Signed-off-by: Francois Clad <fclad@cisco.com>
2018-01-25SRv6 masquerading proxy pluginFrancois Clad1-0/+1
Change-Id: Ia65cf2c7b7fdf84c64e60af4cc815251022c53a9 Signed-off-by: Francois Clad <fclad@cisco.com>
2018-01-23VPPAPIGEN: vppapigen replacement in Python PLY.Ole Troan1-13/+4
This is a version of the VPP API generator in Python PLY. It supports the existing language, and has a plugin architecture for generators. Currently C and JSON are supported. Changes: - vl_api_version to option version = "major.minor.patch" - enum support - Added error checking and reporting - import support (removed the C pre-processor) - services (tying request/reply together) Version: option version = "1.0.0"; Enum: enum colours { RED, BLUE = 50, }; define foo { vl_api_colours_t colours; }; Services: service { rpc foo returns foo_reply; rpc foo_dump returns stream foo_details; rpc want_stats returns want_stats_reply events ip4_counters, ip6_counters; }; Future planned features: - unions - bool, text - array support (including length) - proto3 output plugin - Refactor C/C++ generator as a plugin - Refactor Java generator as a plugin Change-Id: Ifa289966c790e1b1a8e2938a91e69331e3a58bdf Signed-off-by: Ole Troan <ot@cisco.com>
2018-01-19SRv6 static proxy pluginFrancois Clad1-0/+1
Change-Id: Ia0654461d9fa36503323a8375997719c873d23b9 Signed-off-by: Francois Clad <fclad@cisco.com>
2018-01-15Marvell device pluginDamjan Marion1-0/+12
Depends in musdk 17.10 [1], tested on MACCHIATObin [2] board. currently only coves PP2. musdk must be compiled with: ./configure --enable-bpool-dma=64 [1] https://github.com/MarvellEmbeddedProcessors/musdk-marvell [2] http://macchiatobin.net Change-Id: I0247a6b860b0a067c54190eae0bd3fe08de234ad Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-01-03Update package versionDave Wallace1-1/+1
Change-Id: If16943e564b11ff7ac456b16896c62db1152d6dd Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2017-12-20L2 EmulationNeale Ranns1-0/+1
L2 Emulation is a feautre that is applied to L2 ports to 'extract' IP packets from the L2 path and inject them into the L3 path (i.e. into the appropriate ip[4|6]_input node). L3 routes in the table_id for that interface should then be configured as DVR routes, therefore the forwarded packet has the L2 header preserved and togehter the L3 routed system behaves like an L2 bridge. Change-Id: I8effd7e2f4c67ee277b73c7bc79aa3e5a3e34d03 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-12-18Support kube-proxy data planeHongjun Ni1-0/+1
This plugin provides kube-proxy data plane on user space, which is used to replace linux kernal's kube-proxy based on iptables. The idea is largely inspired from VPP LB plugin. Currently, kube-proxy plugin supports three service types: 1) Cluster IP plus Port: support any protocols, including TCP, UDP. 2) Node IP plus Node Port: currently only support UDP. 3) External Load Balancer. Please refer to kp_plugin_doc.md for details. Change-Id: I36690e417dd26ad5ec1bd77c7ea4b8100416cac6 Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
2017-11-20dpdk: add support for DPDK 17.11Damjan Marion1-33/+3
Also remove DPDK 17.05 support. Change-Id: I4f96cb3f002cd90b12d800d6904f2364d7c4e270 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-11-15Fix cosmetic issue in configure.acDamjan Marion1-1/+1
Change-Id: I0a6a58b4ed0a6609382cce8bc2c6668a681823fc Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-11-14Fix typos in configure.ac and dpdk/buffer.cDamjan Marion1-2/+2
Change-Id: I74ff693315a3ffc7aa2640f25d906ca0d6da6bc5 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-11-13dpdk: introduce AVX512 variants of node functionsDamjan Marion1-0/+36
Change-Id: If581feca0d51d0420c971801aecdf9250c671b36 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-11-11Handle CPU flags from autotools projectDamjan Marion1-0/+11
Change-Id: Id085c1e3cbc7bf03df02755f9e35896cdb57e9e3 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-11-06Add --disable-vom config optionDave Barach1-0/+1
The vpp object model consumes more than half of the entire [initial] build time, so it's worth adding a config option. Change-Id: I86ad41f78160d93835804235b8b4a3fc7988f2f7 Signed-off-by: Dave Barach <dave@barachs.net>
2017-11-01VPP Object Model (VOM)Neale Ranns1-1/+2
The VOM is a C++ library for use by clients/agents of VPP for programming state. It uses the binary APIs to do so. Various other common client side functions are also provided. Please see om.hpp for a more detailed description. Change-Id: Ib756bfe99817093815a9e26ccf464aa5583fc523 Signed-off-by: Neale Ranns <neale.ranns@cisco.com> Co-authored-by: Mohsin Kazmi <sykazmi@cisco.com>
2017-10-18Plugin for IP-Address to Interface PuntingPierre Pfister1-0/+1
This plugin provides per-ip address to interface punting. When at least one rule is defined, the plugin receives all packets which destination is one of VPP's address but which was not processed by VPP (e.g., a TCP packet on a port that is not open, or a packet for a protocol which is not attached). Based on the set of configured rules, the destination address of each packet is used to send the packet on the associated interface. This plugin allows multiple containers to use VPP's TCP stack (or other features provided by VPP) while still being able to receive additional packets. Change-Id: I3e69bb7d98183bf5163cb9ecb564cb482de252ce Signed-off-by: Pierre Pfister <ppfister@cisco.com>
2017-09-27Update package versionFlorin Coras1-1/+1
Change-Id: Ic9bc303b65c95a0e06f90c75b067056b0b11e654 Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-09-19Add C++ APIKlement Sekera1-0/+1
Change-Id: Iff634f22d43470e2dc028387b3816257fd7b4156 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-09-19Add new C APIKlement Sekera1-1/+1
Change-Id: I717ce3cd7c867c155de149ec56623269d26d0ff7 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-08-25dpdk: required changes for 17.08Sergio Gonzalez Monroy1-10/+60
DPDK 17.08 breaks ethdev and cryptodev APIs. Address those changes while keeping backwards compatibility for DPDK 17.02 and 17.05. Change-Id: Idd6ac264d0d047fe586c41d4c4ca74e8fc778a54 Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
2017-08-23NAT: Rename snat plugin to nat (VPP-955)Matus Fabian1-1/+1
Change-Id: I30a7e3da7a4efc6038a91e27b48045d4b07e2764 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2017-08-09Add PPPoE PluginHongjun Ni1-0/+1
Supports 64K PPPoE sessions This plugin adds three graph nodes: 1) pppoe-input for PPPoE decapsulation 2) pppoe-encap for PPPoE encapsulation 3) pppoe-tap-dispatch for control plane process Below is the configuration to make PPPoE CP and DP work: vim /etc/vpp/startup.conf tuntap { enable ethernet name newtap } create pppoe tap tap-if-index 1 //Configure it after a subscriber's PPPoE discovery and PPP link establishment succeeds: create pppoe session client-ip 100.1.2.1 session-id 1 client-mac 00:11:01:00:00:01 show pppoe fib show pppoe session Change-Id: I73e724b6bf7c3e4181a9914c5752da1fa72d7e60 Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
2017-07-14dpdk: update buildSergio Gonzalez Monroy1-3/+45
Current optional DPDK PMDs are: - AESNI MB PMD (SW crypto) - AESNI GCM PMD (SW crypto) - MLX4 PMD - MLX5 PMD This change will always build DPDK SW crypto PMDs and required SW crypto libraries, while MLX PMDs are still optional and the user has to build required libraries. Now the configure script detects if any of the optional DPDK PMDs were built and link against their required libraries/dependencies. Change-Id: I1560bebd71035d6486483f22da90042ec2ce40a1 Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
2017-06-22Update master revision to 17.10Neale Ranns1-1/+1
Change-Id: I0b74cad60be4edace5c3636922cfb9c26cfde9ff Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-05-30Flowprobe: Stateful flows and IPv6, L4 recordingOle Troan1-1/+1
Change-Id: I67839281623721bf42f0a918a53356143d9dc78a Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Pavel Kotucek <pkotucek@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com>
2017-05-15Add GTP-U plugin. VPP-694Hongjun Ni1-0/+1
Basic GTP-U feature Change-Id: I31226f890a92c5303ac06e112ed7820cae52d9bd Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
2017-03-29Bugfixing and documentation for SRv6Pablo Camarillo1-1/+0
- Fixed three coverity issues - Linked SRv6 docs - Moved sample plugin to examples folder - Fixed bug with hash. Now everything is using mhash. Potentially in the future we want to do bihash. Change-Id: Ie03a13c8fecb1e315e67d0596cbd23220779aaf2 Signed-off-by: Pablo Camarillo <pcamaril@cisco.com>
2017-03-22Update master revision to 17.07v17.07-rc0Ole Troan1-1/+1
Change-Id: Ieb0a5e70bc3db951e577e6ef52a4adaac9b42271 Signed-off-by: Ole Troan <ot@cisco.com>
2017-03-22Add memif - packet memory interface for intra-host communicationDamjan Marion1-0/+1
Change-Id: I94c06b07a39f07ceba87bf3e7fcfc70e43231e8a Signed-off-by: Damjan Marion <damarion@cisco.com> Co-Authored-By: Milan Lenco <Milan.Lenco@pantheon.tech>
2017-03-15Python API: Change from cPython to CFFI.Ole Troan1-0/+9
Change-Id: I03e52466fb3f909ae52b8fba601168f3eadbd972 Signed-off-by: Ole Troan <ot@cisco.com>
2017-03-10Retire vpp_liteDamjan Marion1-2/+2
vpp_lite platform is not needed anymore as same efect can be achieved with following startup.conf config: plugins { plugin dpdk_plugin.so { disable } } Change-Id: I690ea8ceb1c6e1fe32e01e7da54e9958019a93bf Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-03-04Evolving SRv6 (Segment Routing for IPv6)Pablo Camarillo1-0/+1
Implements: 1.- SR Policies with several (weighted) SID lists 2.- Binding SID 3.- SR LocalSIDs with support for the following functions - End - End.X - End.DX6 - End.DX4 - End.DX2 - End.DT6 - End.DT2 - End.B6 - End.B6.Encaps 4.- SR Steering policies (to steer a traffic through an SR Policy) - Support for IPv6 traffic (IPv6 Encapsulation / SRH insertion) - Support for IPv4 traffic (IPv6 Encapsulation) - Support for L2 traffic (T.Insert / T.Encaps) 5.- Doxygen documentation 6.- Framework (APIs) to allow the definition of new SR LocalSID behaviors by means of plugins 7.- Sample SRv6 LocalSID plugin Change-Id: I2de3d126699d4f11f54c0f7f3b71420ea41fd389 Signed-off-by: Pablo Camarillo <pcamaril@cisco.com>
2017-03-03Fixed PLUGIN_DISABLE bugPablo Camarillo1-1/+1
Change-Id: I7a0ff25a8f74e6eda3a44f2cd7d2e022683accd9 Signed-off-by: Pablo Camarillo <pcamaril@cisco.com>
2017-01-27dpdk: rework cryptodev ipsec build and setupSergio Gonzalez Monroy1-2/+2
Build Cryptodev IPsec support by default when DPDK is enabled but only build hardware Cryptodev PMDs. To enable Cryptodev support, a new startup.conf option for dpdk has been introduced 'enable-cryptodev'. During VPP init, if Cryptodev support is not enabled or not enough cryptodev resources are available then default to OpenSSL ipsec implementation. Change-Id: I5aa7e0d5c2676bdb41d775ef40364536a081956d Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
2017-01-26Change automake python macro to get python pathTomofumi Hayashi1-0/+1
Previously install path for python binding is fixed, as lib/python2.7/site-packages and other version/enironement is not supported. This change introduces automake's python macro and gets the install path from environment dynamically. Change-Id: I6535107d4bde61976fbdf5392d460beb1049658e Signed-off-by: Tomofumi Hayashi <tohayash@redhat.com>
2017-01-16Add --without-libssl configure parameterDamjan Marion1-4/+2
This replaces --without-ipsec and --without-ipv6sr and allows other parts of the code to be disabled if libssl is not available. Change-Id: Id97ff3685a7924d7f86622952e0405d94ceb5957 Signed-off-by: Damjan Marion <damarion@cisco.com>