Age | Commit message (Collapse) | Author | Files | Lines |
|
Move the tcp unit test to the plugin
Add a bihash unit test and a "make test" program to call it
Adjust framework.py to load the plugin, which is disabled by default
Change-Id: Ic229d386a56a9d28dbd54974f231149053ca8f93
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Configure w/ --enable-dlmalloc, see .../build-data/platforms/vpp.mk
src/vppinfra/dlmalloc.[ch] are slightly modified versions of the
well-known Doug Lea malloc. Main advantage: dlmalloc mspaces have no
inherent size limit.
Change-Id: I19b3f43f3c65bcfb82c1a265a97922d01912446e
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Only remaining traces of MAP in the src/vnet is now in buffer.h.
Awaiting a new buffer opaque API (hint, hint).
Change-Id: Ie165561484731f1d7ed6e0f604b43624e06db3f0
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Change-Id: I062d7653e00d77e73a61d8841e01ab4a159b6404
Signed-off-by: Dave Barach <dbarach@cisco.com>
|
|
Add support of NAT66
Change-Id: Ie6aa79078a3835f989829b9a597c448dfd2f9ea3
Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
|
|
A poor man's flow switching or policy based rounting.
An ACL is used to match packets and is associated with a [set of] forwarding paths
that determine how to forward matched packets - collectively this association is a
'policy'.
Policies are then 'attached', in a priority order, to an interface when thaey are
encountered as an input feature. If a packet matches no policies it is forwarded
normally in the IP FIB.
This commit is used to test the "ACL-as-a-service" functionality,
which currently compiles, and the existing traffic ACL tests pass in both hash and linear modes.
Change-Id: I0b274ec9f2e645352fa898b43eb54c457e195964
Signed-off-by: Neale Ranns <nranns@cisco.com>
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Change-Id: If168a9c54baaa516ecbe78de2141f11c17aa2f53
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Add bonding driver to support creation of bond interface which composes of
multiple slave interfaces. The slave interfaces could be physical interfaces,
or just any virtual interfaces. For example, memif interfaces.
The syntax to create a bond interface is
create bond mode <lacp | xor | acitve-backup | broadcast | round-robin>
To enslave an interface to the bond interface,
enslave interface TenGigabitEthernet6/0/0 to BondEthernet0
Please see src/plugins/lacp/lacp_doc.md for more examples and additional
options.
LACP is a control plane protocol which manages and monitors the status of
the slave interfaces. The protocol is part of 802.3ad standard. This patch
implements LACPv1. LACPv2 is not supported.
To enable LACP on the bond interface, specify "mode lacp" when the bond
interface is created. The syntax to enslave a slave interface is the same as
other bonding modes.
Change-Id: I06581d3b87635972f9f0e1ec50b67560fc13e26c
Signed-off-by: Steven <sluong@cisco.com>
|
|
- host mode:
igmp_listen - API to signal that the host has joined an (S,G)
- route mode:
igmp_enable - API to enable the reception of host IGMP messages
igmp_event - API to report the host join/leave from an (S,G)
Change-Id: Id180ec27dee617d33ab3088f5dcf6125d3aa9c8f
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
Change-Id: I6c215858d2c9c620787632b570950b15274c0df2
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I166301c9e2388bae5f70ec0179d663a2703e27f5
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Add a binary API and debug cli to enable/disable cdp. cdp is disabled
by default.
Change-Id: I307c7e38dfda38e36ff3325f65de7036c34d89b1
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
- add infra for pluggable tls "engines"
- makes mbedtls specific code a plugin
Change-Id: I2c5b099e2b69d2be0038e3ef02b208ff907727e7
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Group Base Policy (GBP) defines:
- endpoints: typically a VM or container that is connected to the
virtual switch/router (i.e. to VPP)
- endpoint-group: (EPG) a collection of endpoints
- policy: rules determining which traffic can pass between EPGs a.k.a
a 'contract'
Here, policy is implemented via an ACL.
EPG classification for transit packets is determined by:
- source EPG: from the packet's input interface
- destination EPG: from the packet's destination IP address.
Change-Id: I7b983844826b5fc3d49e21353ebda9df9b224e25
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
Change-Id: Ie460005510b8a70d00de31b6651e762cc3a63229
Signed-off-by: Francois Clad <fclad@cisco.com>
|
|
Change-Id: Ia65cf2c7b7fdf84c64e60af4cc815251022c53a9
Signed-off-by: Francois Clad <fclad@cisco.com>
|
|
Change-Id: Ia0654461d9fa36503323a8375997719c873d23b9
Signed-off-by: Francois Clad <fclad@cisco.com>
|
|
Depends in musdk 17.10 [1], tested on MACCHIATObin [2] board.
currently only coves PP2.
musdk must be compiled with:
./configure --enable-bpool-dma=64
[1] https://github.com/MarvellEmbeddedProcessors/musdk-marvell
[2] http://macchiatobin.net
Change-Id: I0247a6b860b0a067c54190eae0bd3fe08de234ad
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
L2 Emulation is a feautre that is applied to L2 ports to 'extract'
IP packets from the L2 path and inject them into the L3 path (i.e.
into the appropriate ip[4|6]_input node).
L3 routes in the table_id for that interface should then be configured
as DVR routes, therefore the forwarded packet has the L2 header
preserved and togehter the L3 routed system behaves like an L2 bridge.
Change-Id: I8effd7e2f4c67ee277b73c7bc79aa3e5a3e34d03
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
This plugin provides kube-proxy data plane on user space,
which is used to replace linux kernal's kube-proxy based on iptables.
The idea is largely inspired from VPP LB plugin.
Currently, kube-proxy plugin supports three service types:
1) Cluster IP plus Port: support any protocols, including TCP, UDP.
2) Node IP plus Node Port: currently only support UDP.
3) External Load Balancer.
Please refer to kp_plugin_doc.md for details.
Change-Id: I36690e417dd26ad5ec1bd77c7ea4b8100416cac6
Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
|
|
Change-Id: If581feca0d51d0420c971801aecdf9250c671b36
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Id085c1e3cbc7bf03df02755f9e35896cdb57e9e3
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
This plugin provides per-ip address to interface punting.
When at least one rule is defined, the plugin receives all packets
which destination is one of VPP's address but which was not processed
by VPP (e.g., a TCP packet on a port that is not open, or a packet
for a protocol which is not attached).
Based on the set of configured rules, the destination address of each
packet is used to send the packet on the associated interface.
This plugin allows multiple containers to use
VPP's TCP stack (or other features provided by VPP) while still
being able to receive additional packets.
Change-Id: I3e69bb7d98183bf5163cb9ecb564cb482de252ce
Signed-off-by: Pierre Pfister <ppfister@cisco.com>
|
|
Change-Id: I30a7e3da7a4efc6038a91e27b48045d4b07e2764
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Supports 64K PPPoE sessions
This plugin adds three graph nodes:
1) pppoe-input for PPPoE decapsulation
2) pppoe-encap for PPPoE encapsulation
3) pppoe-tap-dispatch for control plane process
Below is the configuration to make PPPoE CP and DP work:
vim /etc/vpp/startup.conf
tuntap {
enable
ethernet
name newtap
}
create pppoe tap tap-if-index 1
//Configure it after a subscriber's PPPoE discovery and PPP link establishment succeeds:
create pppoe session client-ip 100.1.2.1 session-id 1 client-mac 00:11:01:00:00:01
show pppoe fib
show pppoe session
Change-Id: I73e724b6bf7c3e4181a9914c5752da1fa72d7e60
Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
|
|
Change-Id: I67839281623721bf42f0a918a53356143d9dc78a
Signed-off-by: Ole Troan <ot@cisco.com>
Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Basic GTP-U feature
Change-Id: I31226f890a92c5303ac06e112ed7820cae52d9bd
Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
|
|
- Fixed three coverity issues
- Linked SRv6 docs
- Moved sample plugin to examples folder
- Fixed bug with hash. Now everything is using mhash. Potentially in the future we want to do bihash.
Change-Id: Ie03a13c8fecb1e315e67d0596cbd23220779aaf2
Signed-off-by: Pablo Camarillo <pcamaril@cisco.com>
|
|
Change-Id: I94c06b07a39f07ceba87bf3e7fcfc70e43231e8a
Signed-off-by: Damjan Marion <damarion@cisco.com>
Co-Authored-By: Milan Lenco <Milan.Lenco@pantheon.tech>
|
|
vpp_lite platform is not needed anymore as same efect can be
achieved with following startup.conf config:
plugins {
plugin dpdk_plugin.so { disable }
}
Change-Id: I690ea8ceb1c6e1fe32e01e7da54e9958019a93bf
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Implements:
1.- SR Policies with several (weighted) SID lists
2.- Binding SID
3.- SR LocalSIDs with support for the following functions
- End
- End.X
- End.DX6
- End.DX4
- End.DX2
- End.DT6
- End.DT2
- End.B6
- End.B6.Encaps
4.- SR Steering policies (to steer a traffic through an SR Policy)
- Support for IPv6 traffic (IPv6 Encapsulation / SRH insertion)
- Support for IPv4 traffic (IPv6 Encapsulation)
- Support for L2 traffic
(T.Insert / T.Encaps)
5.- Doxygen documentation
6.- Framework (APIs) to allow the definition of new SR LocalSID behaviors by means of plugins
7.- Sample SRv6 LocalSID plugin
Change-Id: I2de3d126699d4f11f54c0f7f3b71420ea41fd389
Signed-off-by: Pablo Camarillo <pcamaril@cisco.com>
|
|
Change-Id: I238258cdeb77035adc5e88903d824593d0a1da90
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
At the least, $(BUILT_SOURCES) should be added to CLEANFILES. Also
beneficial is $(api_DATA), and in the case of Java, *.files and *.h.
Also there is a vpp/app/version.h, and some grammar and lex files in
vppapigen.
Change-Id: Ic6d3f2d40ce65e1d9a8b88217fa1f36de393ebb4
Signed-off-by: Burt Silverman <burtms@gmail.com>
|
|
- remove unused stuff
- add --quiet flag to libtool
- avoid building some tests programs when tests are not enabled
Change-Id: Ie34aeec1a598ad811256a00354f66cfddae9d0b9
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I80b8348ed4efd53d292c37a1ff69c13ee4741986
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I1c3b87e886603678368428ae56a6bd3327cbc90d
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I7b51f88292e057c6443b12224486f2d0c9f8ae23
Signed-off-by: Damjan Marion <damarion@cisco.com>
|