summaryrefslogtreecommitdiffstats
path: root/src/plugins/Makefile.am
AgeCommit message (Collapse)AuthorFilesLines
2018-03-14IPIP: Add IP{v4,v6} over IP{v4,v6} configured tunnel support.Ole Troan1-4/+0
Change-Id: I166301c9e2388bae5f70ec0179d663a2703e27f5 Signed-off-by: Ole Troan <ot@cisco.com>
2018-03-10Move the vnet cdp protocol implementation to a pluginDave Barach1-0/+4
Add a binary API and debug cli to enable/disable cdp. cdp is disabled by default. Change-Id: I307c7e38dfda38e36ff3325f65de7036c34d89b1 Signed-off-by: Dave Barach <dave@barachs.net>
2018-03-08tls: make tls engines pluggableFlorin Coras1-0/+4
- add infra for pluggable tls "engines" - makes mbedtls specific code a plugin Change-Id: I2c5b099e2b69d2be0038e3ef02b208ff907727e7 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-02-09GBP pluginNeale Ranns1-0/+4
Group Base Policy (GBP) defines: - endpoints: typically a VM or container that is connected to the virtual switch/router (i.e. to VPP) - endpoint-group: (EPG) a collection of endpoints - policy: rules determining which traffic can pass between EPGs a.k.a a 'contract' Here, policy is implemented via an ACL. EPG classification for transit packets is determined by: - source EPG: from the packet's input interface - destination EPG: from the packet's destination IP address. Change-Id: I7b983844826b5fc3d49e21353ebda9df9b224e25 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-01-29SRv6 dynamic proxy pluginFrancois Clad1-0/+4
Change-Id: Ie460005510b8a70d00de31b6651e762cc3a63229 Signed-off-by: Francois Clad <fclad@cisco.com>
2018-01-25SRv6 masquerading proxy pluginFrancois Clad1-0/+4
Change-Id: Ia65cf2c7b7fdf84c64e60af4cc815251022c53a9 Signed-off-by: Francois Clad <fclad@cisco.com>
2018-01-19SRv6 static proxy pluginFrancois Clad1-0/+4
Change-Id: Ia0654461d9fa36503323a8375997719c873d23b9 Signed-off-by: Francois Clad <fclad@cisco.com>
2018-01-15Marvell device pluginDamjan Marion1-0/+4
Depends in musdk 17.10 [1], tested on MACCHIATObin [2] board. currently only coves PP2. musdk must be compiled with: ./configure --enable-bpool-dma=64 [1] https://github.com/MarvellEmbeddedProcessors/musdk-marvell [2] http://macchiatobin.net Change-Id: I0247a6b860b0a067c54190eae0bd3fe08de234ad Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-12-20L2 EmulationNeale Ranns1-0/+4
L2 Emulation is a feautre that is applied to L2 ports to 'extract' IP packets from the L2 path and inject them into the L3 path (i.e. into the appropriate ip[4|6]_input node). L3 routes in the table_id for that interface should then be configured as DVR routes, therefore the forwarded packet has the L2 header preserved and togehter the L3 routed system behaves like an L2 bridge. Change-Id: I8effd7e2f4c67ee277b73c7bc79aa3e5a3e34d03 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-12-18Support kube-proxy data planeHongjun Ni1-0/+4
This plugin provides kube-proxy data plane on user space, which is used to replace linux kernal's kube-proxy based on iptables. The idea is largely inspired from VPP LB plugin. Currently, kube-proxy plugin supports three service types: 1) Cluster IP plus Port: support any protocols, including TCP, UDP. 2) Node IP plus Node Port: currently only support UDP. 3) External Load Balancer. Please refer to kp_plugin_doc.md for details. Change-Id: I36690e417dd26ad5ec1bd77c7ea4b8100416cac6 Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
2017-11-13dpdk: introduce AVX512 variants of node functionsDamjan Marion1-0/+1
Change-Id: If581feca0d51d0420c971801aecdf9250c671b36 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-11-11Handle CPU flags from autotools projectDamjan Marion1-1/+1
Change-Id: Id085c1e3cbc7bf03df02755f9e35896cdb57e9e3 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-10-18Plugin for IP-Address to Interface PuntingPierre Pfister1-0/+4
This plugin provides per-ip address to interface punting. When at least one rule is defined, the plugin receives all packets which destination is one of VPP's address but which was not processed by VPP (e.g., a TCP packet on a port that is not open, or a packet for a protocol which is not attached). Based on the set of configured rules, the destination address of each packet is used to send the packet on the associated interface. This plugin allows multiple containers to use VPP's TCP stack (or other features provided by VPP) while still being able to receive additional packets. Change-Id: I3e69bb7d98183bf5163cb9ecb564cb482de252ce Signed-off-by: Pierre Pfister <ppfister@cisco.com>
2017-08-23NAT: Rename snat plugin to nat (VPP-955)Matus Fabian1-2/+2
Change-Id: I30a7e3da7a4efc6038a91e27b48045d4b07e2764 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2017-08-09Add PPPoE PluginHongjun Ni1-0/+4
Supports 64K PPPoE sessions This plugin adds three graph nodes: 1) pppoe-input for PPPoE decapsulation 2) pppoe-encap for PPPoE encapsulation 3) pppoe-tap-dispatch for control plane process Below is the configuration to make PPPoE CP and DP work: vim /etc/vpp/startup.conf tuntap { enable ethernet name newtap } create pppoe tap tap-if-index 1 //Configure it after a subscriber's PPPoE discovery and PPP link establishment succeeds: create pppoe session client-ip 100.1.2.1 session-id 1 client-mac 00:11:01:00:00:01 show pppoe fib show pppoe session Change-Id: I73e724b6bf7c3e4181a9914c5752da1fa72d7e60 Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
2017-05-30Flowprobe: Stateful flows and IPv6, L4 recordingOle Troan1-2/+2
Change-Id: I67839281623721bf42f0a918a53356143d9dc78a Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Pavel Kotucek <pkotucek@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com>
2017-05-15Add GTP-U plugin. VPP-694Hongjun Ni1-0/+5
Basic GTP-U feature Change-Id: I31226f890a92c5303ac06e112ed7820cae52d9bd Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
2017-03-29Bugfixing and documentation for SRv6Pablo Camarillo1-4/+0
- Fixed three coverity issues - Linked SRv6 docs - Moved sample plugin to examples folder - Fixed bug with hash. Now everything is using mhash. Potentially in the future we want to do bihash. Change-Id: Ie03a13c8fecb1e315e67d0596cbd23220779aaf2 Signed-off-by: Pablo Camarillo <pcamaril@cisco.com>
2017-03-22Add memif - packet memory interface for intra-host communicationDamjan Marion1-0/+4
Change-Id: I94c06b07a39f07ceba87bf3e7fcfc70e43231e8a Signed-off-by: Damjan Marion <damarion@cisco.com> Co-Authored-By: Milan Lenco <Milan.Lenco@pantheon.tech>
2017-03-10Retire vpp_liteDamjan Marion1-1/+5
vpp_lite platform is not needed anymore as same efect can be achieved with following startup.conf config: plugins { plugin dpdk_plugin.so { disable } } Change-Id: I690ea8ceb1c6e1fe32e01e7da54e9958019a93bf Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-03-04Evolving SRv6 (Segment Routing for IPv6)Pablo Camarillo1-0/+4
Implements: 1.- SR Policies with several (weighted) SID lists 2.- Binding SID 3.- SR LocalSIDs with support for the following functions - End - End.X - End.DX6 - End.DX4 - End.DX2 - End.DT6 - End.DT2 - End.B6 - End.B6.Encaps 4.- SR Steering policies (to steer a traffic through an SR Policy) - Support for IPv6 traffic (IPv6 Encapsulation / SRH insertion) - Support for IPv4 traffic (IPv6 Encapsulation) - Support for L2 traffic (T.Insert / T.Encaps) 5.- Doxygen documentation 6.- Framework (APIs) to allow the definition of new SR LocalSID behaviors by means of plugins 7.- Sample SRv6 LocalSID plugin Change-Id: I2de3d126699d4f11f54c0f7f3b71420ea41fd389 Signed-off-by: Pablo Camarillo <pcamaril@cisco.com>
2017-03-01dpdk: be a pluginDamjan Marion1-0/+5
Change-Id: I238258cdeb77035adc5e88903d824593d0a1da90 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-01-28Add files to CLEANFILES for robust make clean.Burt Silverman1-0/+1
At the least, $(BUILT_SOURCES) should be added to CLEANFILES. Also beneficial is $(api_DATA), and in the case of Java, *.files and *.h. Also there is a vpp/app/version.h, and some grammar and lex files in vppapigen. Change-Id: Ic6d3f2d40ce65e1d9a8b88217fa1f36de393ebb4 Signed-off-by: Burt Silverman <burtms@gmail.com>
2017-01-11Makefile.am cleanupDamjan Marion1-0/+1
- remove unused stuff - add --quiet flag to libtool - avoid building some tests programs when tests are not enabled Change-Id: Ie34aeec1a598ad811256a00354f66cfddae9d0b9 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-01-03Do not require external vppapigen when not cross-compilingDamjan Marion1-1/+0
Change-Id: I80b8348ed4efd53d292c37a1ff69c13ee4741986 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-01-01Move java,lua api and remaining plugins to src/Damjan Marion1-0/+18
Change-Id: I1c3b87e886603678368428ae56a6bd3327cbc90d Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-12-28Reorganize source tree to use single autotools instanceDamjan Marion1-0/+60
Change-Id: I7b51f88292e057c6443b12224486f2d0c9f8ae23 Signed-off-by: Damjan Marion <damarion@cisco.com>