summaryrefslogtreecommitdiffstats
path: root/src/plugins/acl/fa_node.c
AgeCommit message (Collapse)AuthorFilesLines
2017-10-13acl-plugin: display "::" for INADDR6_ANY on ACL outputSteve Shin1-2/+4
INADDR6_ANY should be displayed as "::" instead of "0.0.0.0"(ipv4 format). Change-Id: I24ec7b6febbfeca5db7ff894f455ecb73d954334 Signed-off-by: Steve Shin <jonshin@cisco.com>
2017-08-22acl-plugin: Recreate the bihash_40_8.h in the proper placeAndrew Yourtchenko1-1/+1
Change-Id: I30a3df53bc5fe5ab991a657918eb502bd2913440 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2017-08-18acl-plugin: time out the sessions created by main thread too (VPP-948)Andrew Yourtchenko1-13/+20
In multithread setup the main thread may send packets, which may pass through the node with permit+reflect action. This creates the connection in lists for thread0, however in multithread there are no interupt handlers there. Ensure we are not spending too much time spinning in a tight cycle by suspending the main cleaner thread until the current iteration of interrupts is processed. Change-Id: Idb7346737757ee9a67b5d3e549bc9ad9aab22e89 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com> (cherry picked from commit c1ff53f25d04ec1cc31844abd38014e91e398b5f)
2017-08-10acl-plugin: all TCP sessions treated as transient (VPP-932)Andrew Yourtchenko1-3/+6
The packet that was creating the session was not tracked, consequently the TCP flags seen within the session record never got the value for the session to get treated as being in the established state. Test-escape, so add the TCP tests which test the three phases of the TCP session life and make them all pass. Change-Id: Ib048bc30c809a7f03be2de7e8361c2c281270348 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com> (cherry picked from commit 754370f1b55d4102d21dd94676f2bda3170c7df0)
2017-08-08acl-plugin: rework the optimization 7383, fortify acl-plugin memory behavior ↵Andrew Yourtchenko1-2/+14
(VPP-910) The further prolonged testing from testbed that reported VPP-910 has uncovered a couple of deeper issues with optimization from 7384, and the usage of subscripts rather than vec_elt_at_index() allowed to hide a couple of further errors in the code. Also, the current acl-plugin behavior of using the global heap for its dynamic data is problematic - it makes the troubleshooting much harder by potentially spreading the problem around. Based on this experience, this commits makes a few changes to fix the issues seen, also improving the serviceability of the acl-plugin code for the future: - Use separate mheaps for any ACL-related control plane operations and separate for the hash lookup datastructures, to compartmentalize any memory-related issues for the ACL plugin. - Ensure vec_elt_at_index() usage throughout the hash_lookup.c file. - Use vectors rather than raw memory for storing the "ordinary" ACL rules. - Rework the optimization from 7384 to use a separate tail pointer rather than overloading the "prev" field. - Make get_session_ptr() more conservative and adjust is_valid_session_ptr accordingly Change-Id: Ifda85193f361de5ed3782a4acd39622bd33c5830 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com> (cherry picked from commit bd9c5ffe39e9ce61db95d74d150e07d738f24da1)
2017-08-03acl-plugin: multicore: CSIT c100k 2-core stateful ACL test does not pass ↵Andrew Yourtchenko1-28/+59
(VPP-912) Fix several threading-related issues uncovered by the CSIT scale/performance test: - make the per-interface add/del counters per-thread - preallocate the per-worker session pools rather than attempting to resize them within the datapath - move the bihash initialization to the moment of ACL being applied rather than later during the connection creation - adjust the connection cleaning logic to not require the signaling from workers to main thread - make the connection lists check in the main thread robust against workers updating the list heads at the same time - add more information to "show acl-plugin sessions" to aid in debugging Change-Id: If82ef715e4993614df11db5e9afa7fa6b522d9bc Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com> (cherry picked from commit 8e4222fc7e23a478b021930ade3cb7d20938e398)
2017-07-23Improve L2 Input/Output Feature Infrastructure and UsageJohn Lo1-6/+1
Simplify L2 output feature infra to unify with L2 input feature infra using the newly improved feature bitmap mechanism. Updated all L2 features to use the more efficient infra functions. Change-Id: If8f463826b0af0717129befe92a27ea8cfc40449 Signed-off-by: John Lo <loj@cisco.com>
2017-06-22acl-plugin: clean up the code enabling/disabling acl-plugin processing on ↵Andrew Yourtchenko1-0/+2
interface Multiple subsequent calls to vnet_feature_enable_disable() to enable the feature cause the feature to be inserted into the processing graph multiple times in a row. This might be argued to be a bug in that function, but enabling already enabled feature is suboptimal anyway, so avoid that. The existing tests already catch this issue whenever the ASSERT() part of this patch was added. Change-Id: Ia2c06f7dc87bbe05795c2c7b7d19ea06270ce150 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2017-06-21acl-plugin: CLI to clear all sessionsAndrew Yourtchenko1-2/+21
It is useful to have the CLI to clear the existing sessions. There was a work-in-progress CLI but it did not work properly. Fix it and split into a separate "clear acl-plugin sessions", and add a unit test into the extended connection-oriented tests. Change-Id: I55889165ebcee139841fdac88747390903a05394 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2017-06-21acl-plugin: use ethernet_buffer_header_size() to determine the size of the ↵Andrew Yourtchenko1-1/+1
ethernet header When extracting the 5-tuple, use the ethernet_buffer_header_size() so we can correctly handle the case of subinterfaces, etc. Change-Id: Ied73fde98d6b313e9eeab2aff4f22daa50a6cbbf Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2017-06-21acl-plugin: fix coverity issue 170476Andrew Yourtchenko1-2/+1
Remove the unnecessary variable assignment which coverity detected. Change-Id: I66ac20a8495400ac59192ddb72f16c95f6b4d03c Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2017-06-19acl-plugin: bihash-based ACL lookupAndrew Yourtchenko1-4/+35
Add a bihash-based ACL lookup mechanism and make it a new default. This changes the time required to lookup a 5-tuple match from O(total_N_entries) to O(total_N_mask_types), where "mask type" is an overall mask on the 5-tuple required to represent an ACE. For testing/comparison there is a temporary debug CLI "set acl-plugin use-hash-acl-matching {0|1}", which, when set to 0, makes the plugin use the "old" linear lookup, and when set to 1, makes it use the hash-based lookup. Based on the discussions on vpp-dev mailing list, prevent assigning the ACL index to an interface, when the ACL with that index is not defined, also prevent deleting an ACL if that ACL is applied. Also, for the easier debugging of the state, there are new debug CLI commands to see the ACL plugin state at several layers: "show acl-plugin acl [index N]" - show a high-level ACL representation, used for the linear lookup and as a base for building the hashtable-based lookup. Also shows if a given ACL is applied somewhere. "show acl-plugin interface [sw_if_index N]" - show which interfaces have which ACL(s) applied. "show acl-plugin tables" - a lower-level debug command used to see the state of all of the related data structures at once. There are specifiers possible, which make for a more focused and maybe augmented output: "show acl-plugin tables acl [index N]" show the "bitmask-ready" representations of the ACLs, we well as the mask types and their associated indices. "show acl-plutin tables mask" show the derived mask types and their indices only. "show acl-plugin tables applied [sw_if_index N]" show the table of all of the ACEs applied for a given sw_if_index or all interfaces. "show acl-plugin tables hash [verbose N]" show the 48x8 bihash used for the ACL lookup. Change-Id: I89fff051424cb44bcb189e3cee04c1b8f76efc28 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2017-06-15acl-plugin: store sessions in a single hash table instead of a per-interfaceAndrew Yourtchenko1-18/+27
A bihash-per-interface is convenient, but turns out tricky difficult from the maintenance standpoint with the large number of interfaces. This patch makes the sessions reside in a single hash table for all the interfaces, adding the lower 16 bit of sw_if_index as part of the key into the previously unused space. There is a tradeoff, that a session with an identical 5-tuple and the same sw_if_index modulo 65536 will match on either of the interfaces. The probability of that is deemed sufficiently small to not worry about it. In case it still happens before the heat death of the universe, there is a clib_warning and the colliding packet will be dropped, at which point we will need to bump the hash key size by another u64, but rather not pay the cost of doing that right now. Change-Id: I2747839cfcceda73e597cbcafbe1e377fb8f1889 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2017-06-09acl-plugin: wrap a verbose debug message in the appropriate conditionalAndrew Yourtchenko1-0/+2
Change-Id: Ibd57cb617642e42d4c4d64f186479702b8a81900 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2017-06-07acl-plugin: make the ACL plugin multicore-capableAndrew Yourtchenko1-187/+459
Add the logic to be able to use stateful ACLs in a multithreaded setup. Change-Id: I3b0cfa6ca4ea8f46f61648611c3e97b00c3376b6 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2017-05-07Avoid active connection prevent timeout of idle conns after itAndrew Yourtchenko1-9/+10
Fix a logic error related to timing out of the connections following the active one. To avoid this class of issue in the future, create corresponding testcases, as well as some trivial sanity testcases for both IPv4 and IPv6. Since these tests are timing-dependent and take up time, mark them as extended tests. Change-Id: I2c72bad5efda7db8aa9cb05801fe47928dc47927 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2017-04-18ACL-plugin does not match UDP next-header, VPP-687Pavel Kotucek1-1/+1
Change-Id: Ide4f9bd6158fb64d069540fb43f4e593e39d6ff3 Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
2017-04-06acl-plugin: make the IPv4/IPv6 non-first fragment handling in line with ACL ↵Andrew Yourtchenko1-9/+61
(VPP-682) This fixes the previously-implicit "drop all non-first fragments" behavior to be more in line with security rules: a non-first fragment is treated for the purposes of matching the ACL as a packet with the port match succeeding. This allows to change the behavior to permit the fragmented packets for the default "permit specific rules" ruleset, but also gives the flexibility to block the non-initial fragments by inserting into the begining a bogus rule which would deny the L4 traffic. Also, add a knob which allows to potentially turn this behavior off in case of a dire need (and revert to dropping all non-initial fragments), via a debug CLI. Change-Id: I546b372b65ff2157d9c68b1d32f9e644f1dd71b4 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com> (cherry picked from commit 9fc0c26c6b28fd6c8b8142ea52f52eafa7e8c7ac)
2017-03-30acl-plugin: cleaner node bugfixes (VPP-675)Andrew Yourtchenko1-51/+46
- use the counters in a private struct rather than node error counters - ensure the timer for the non-idle connections is restarted - fix the deletion of conn at the current tail the list Change-Id: I632f63574d2ced95fb75c5e7fb588c78fb3cce1c Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com> (cherry picked from commit 097051a3bd1f63a177c0728f15375afd84a68918)
2017-03-21ACL plugin 1.2Andrew Yourtchenko1-0/+1444
L3 path support, L2+L3 unified processing node, skip IPv6 EH support. Change-Id: Iac37a466ba1c035e5c2997b03c0743bfec5c9a08 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>