summaryrefslogtreecommitdiffstats
path: root/src/plugins/acl
AgeCommit message (Collapse)AuthorFilesLines
2017-05-15acl-plugin: unapply the ACLs if interface is being deletedAndrew Yourtchenko1-0/+4
(HC2VPP-137 is the client behavior triggering this) If the user does not unapply the ACLs off the interface, but deletes the interface, the subsequent reuse of the sw_if_index might find itself with the datapath hooked up for ACL processing even though there is no ACL configured. The fix is to unapply any ACLs in the callback which is called upon the sw_if_index addition/deletion. Change-Id: Icea413d7fbf1ef891844a4818626e1b34fe79cbf Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com> (cherry picked from commit 4c72e629e5ace392390a9d6109594254525064f7)
2017-05-15Add a missing byte-swap call in ACL intf dump.Jon Loeliger1-1/+1
Change-Id: I87495d95dc6c5a36ff6d2ae05203e22e43403bf6 Signed-off-by: Jon Loeliger <jdl@netgate.com>
2017-05-10Add crc32c inline function, allows compilation on 32-bit systemsDamjan Marion1-7/+2
32-bit code still can use crc32c instructions, but it operates on 32 registers Change-Id: I9bb6b0b59635d6ea6a753584676ebcf59c8f6584 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-05-07Avoid active connection prevent timeout of idle conns after itAndrew Yourtchenko2-10/+12
Fix a logic error related to timing out of the connections following the active one. To avoid this class of issue in the future, create corresponding testcases, as well as some trivial sanity testcases for both IPv4 and IPv6. Since these tests are timing-dependent and take up time, mark them as extended tests. Change-Id: I2c72bad5efda7db8aa9cb05801fe47928dc47927 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2017-04-25"autoreply" flag: autogenerate standard xxx_reply_t messagesDave Barach1-55/+5
Change-Id: I72298aaae7d172082ece3a8edea4217c11b28d79 Signed-off-by: Dave Barach <dave@barachs.net>
2017-04-20Clean up old datapath code in ACL plugin.Andrew Yourtchenko12-2074/+18
Change-Id: I3d64d5ced38a68f3fa208be00c49d20c4e6d4d0e Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2017-04-18ACL-plugin does not match UDP next-header, VPP-687Pavel Kotucek1-1/+1
Change-Id: Ide4f9bd6158fb64d069540fb43f4e593e39d6ff3 Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
2017-04-12acl-plugin: missing "deny" parameter in APIPavel Kotucek1-0/+5
Change-Id: Ie2ab844ad27b5ddb552bad9b19e7029cf91e4071 Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
2017-04-06acl-plugin: make the IPv4/IPv6 non-first fragment handling in line with ACL ↵Andrew Yourtchenko4-13/+77
(VPP-682) This fixes the previously-implicit "drop all non-first fragments" behavior to be more in line with security rules: a non-first fragment is treated for the purposes of matching the ACL as a packet with the port match succeeding. This allows to change the behavior to permit the fragmented packets for the default "permit specific rules" ruleset, but also gives the flexibility to block the non-initial fragments by inserting into the begining a bogus rule which would deny the L4 traffic. Also, add a knob which allows to potentially turn this behavior off in case of a dire need (and revert to dropping all non-initial fragments), via a debug CLI. Change-Id: I546b372b65ff2157d9c68b1d32f9e644f1dd71b4 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com> (cherry picked from commit 9fc0c26c6b28fd6c8b8142ea52f52eafa7e8c7ac)
2017-04-05acl-plugin: fix pretty-printing in "api trace custom-dump" (VPP-683)Andrew Yourtchenko5-316/+388
Change-Id: Id15b401223aabe7dacb7566c871ebefc17fbb1fc Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com> (cherry picked from commit 7fd3f513c7df198c45204eba0a3e9a3abe509593)
2017-03-30acl-plugin: cleaner node bugfixes (VPP-675)Andrew Yourtchenko3-51/+75
- use the counters in a private struct rather than node error counters - ensure the timer for the non-idle connections is restarted - fix the deletion of conn at the current tail the list Change-Id: I632f63574d2ced95fb75c5e7fb588c78fb3cce1c Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com> (cherry picked from commit 097051a3bd1f63a177c0728f15375afd84a68918)
2017-03-22vlib: add description field in plugin registrationDamjan Marion1-0/+1
Change-Id: I88b322a5d602f3d6d3310e971479180a89430e0e Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-03-21ACL plugin 1.2Andrew Yourtchenko5-19/+2086
L3 path support, L2+L3 unified processing node, skip IPv6 EH support. Change-Id: Iac37a466ba1c035e5c2997b03c0743bfec5c9a08 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2017-03-16API:replaced all REPLY_MACRO's with api_helper_macros.hEyal Bari1-68/+15
Change-Id: I08ab1fd0abdd1db4aff11a38c9c0134b01368e11 Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-03-13ACL plugin rejects ICMP messages (VPP-624)Pavel Kotucek1-21/+19
Change-Id: I95113a277b94cce5ff332fcf9f57ec6f385acec0 Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
2017-03-03VPP-651: Ensure sw_if_index to node mapping for L2 output path is only done ↵Andrew Yourtchenko7-85/+36
via l2output_main.next_nodes Before this commit, several output features that happen to be the last in the list of features to be executed, send the packets directly to <interfaceName>-output. To do this, they use l2_output_dispatch, which builds a list of sw_if_index to next index mappings. When interfaces are deleted and the new interfaces are created, these mappings become stale, and cause the packets being sent to wrong interface output nodes. This patch (thanks John Lo for the brilliant idea!) adds a feature node "output", whose sole purpose is dispatching the packets to the correct interface output nodes. To do that, it uses the l2output_main.next_nodes, which is already taken care of for the case of the sw_if_index reuse, so this makes the dependent features all work correctly. Since this changes the packet path, for the features that were always the last ones it has triggered a side problem of the output feat_next_node_index not being properly initalized. These two users are l2-output-classify node and the output nodes belonging to the acl-plugin. For the first one the less invasive fix is just to initialize that field. For the acl-plugin nodes, rewrite the affected part of the code to use feat_bitmap_get_next_node_index since this is essentially what the conditional in l2_output_dispatch does, and fix the compiler warnings generated. This fix was first made in stable/1701 under commit e7dcee4027854b0ad076101471afdfff67eb9011. Change-Id: I32e876ab1e1d498cf0854c19c6318dcf59a93805 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2017-02-03Plugin infrastructure improvementsDamjan Marion4-39/+6
This patch replaces requirement for vlib_plugin_register function in the plugin so file and introduces new macro: VLIB_PLUGIN_REGISTER () = { .version = "version string", .version_required = "requred version", .default_disabled = 1, .early_init = "early_init_function_name", }; Plugin will nor be loaded if .default_disabled is set to 1 unless explicitely enabled in startup.conf. If .verstion_required is set, plugin will not be loaded if there is version mismatch between plugin and vpp. This can be bypassed by setting "skip-version-check" for specific plugin. If .early-init string is present, plugin loader will try to resolve this specific symbol in the plugin namespace and make a function call. Following startup.conf configuration is added: plugins { path /path/to/plugin/directory plugin ila_plugin.so { enable skip-version-check } plugin acl_plugin.so { disable } } Change-Id: I706c691dd34d94ffe9e02b59831af8859a95f061 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-02-02Refactor fragile msg macro W and W2 to not burry return control flow.Jon Loeliger1-16/+36
Instead, have them accept and assign a return paramter leaving the return control flow up to the caller. Clean up otherwise misleading returns present even after "NOT REACHED" comments. Change-Id: I0861921f73ab65d55b95eabd27514f0129152723 Signed-off-by: Jon Loeliger <jdl@netgate.com>
2017-02-02Localize the timeout variable within the W message macro.Jon Loeliger1-12/+0
Rather than rely on an unbound variable, explicitly introduce the timeout variable within the 'do { ... } while (0)' construct as a block-local variable. Change-Id: I6e78635290f9b5ab3f56b7f116c5fa762c88c9e9 Signed-off-by: Jon Loeliger <jdl@netgate.com>
2017-02-02Convert message macro S to accept a message pointer parameter;Jon Loeliger1-12/+12
Rather than blindly assume an unbound, fixed message parameter explicilty pass it as a paramter to the S() macro. Change-Id: Ieea1f1815cadd2eec7d9240408d69acdc3caa49a Signed-off-by: Jon Loeliger <jdl@netgate.com>
2017-02-02Ensure all M() and M2() second parameters are the message pointer.Jon Loeliger1-8/+8
Rather than maintain (?) an unused second parameter, t, and pull an unbound message pointer, mp, out of context, explicitly list the message pointer as the second parameter. Change-Id: I92143efda6211cdf6b935470f8c71579742a6b64 Signed-off-by: Jon Loeliger <jdl@netgate.com>
2017-01-25Repair plugin binary API message numberingDave Barach1-0/+2
Change-Id: I422a3f168bd483e011cfaf54af022cb79b78db02 Signed-off-by: Dave Barach <dave@barachs.net>
2017-01-23binary-api debug CLI works with pluginsDave Barach1-47/+4
Change-Id: I81f33f5153d5afac94b66b5a8cb91da77463af79 Signed-off-by: Dave Barach <dave@barachs.net>
2017-01-03VPP-574: fix the MACIP ACLs blocking ARP trafficAndrew Yourtchenko1-0/+47
The initial assumption was that the MACIP ACL classifier tables would be applied after the classification of the traffic based on the ethertype, it turned out to be untrue, but the fix in the code did not happen. Add the ethertype to the mask, and the logic to create the ACL classifier tables permitting the ARP ethertype with the correct payload. Change-Id: I7c05c7893f6df8258998eed8983056c77586df81 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2017-01-01Move java,lua api and remaining plugins to src/Damjan Marion16-0/+5614
Change-Id: I1c3b87e886603678368428ae56a6bd3327cbc90d Signed-off-by: Damjan Marion <damarion@cisco.com>