Age | Commit message (Collapse) | Author | Files | Lines |
|
It is actually longer and slower...
Type: refactor
Change-Id: I0f126d4cdb13ecc60a2d370409f23820d7f7eb72
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: refactor
Change-Id: I76ccf8970ebb3f180ce745d8b515c5e0724784d6
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I89fb738903ee74ffcb7c77a041391f0388df6991
|
|
Type: improvement
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: I10141033030342881298d70742fa5bdea402b4c9
|
|
Type: refactor
Change-Id: Id10cbf52e8f2dd809080a228d8fa282308be84ac
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
If dpdk device starts failed for some reason, we should not try to get
stats and the interface must remain down.
Type: fix
Change-Id: I0079f89d3b43a9b47553991347da8ed4ce6ede8d
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
Change-Id: I433fe3799975fe3ba00fa30226f6e8dae34e88fc
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: improvement
Some tests i.e. ipsec see performance regression when offload flags
are moved to 2nd cacheline. This patch moves them back to 1st cacheline.
Change-Id: I6ead45ff6d2c467b0d248f409e27c2ba31758741
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
trajectory trace has been broken for a while because we used to save the
buffer trajectory in a vector pointed to in opaque2. This does not work
well when opaque2 is copied (eg. because of a clone) as 2 buffers end up
sharing the same vector.
This dedicates a full cacheline in the buffer metadata instead when
trajectory is compiled in. No dynamic allocation, no sharing, no tears.
Type: refactor
Change-Id: I6a028ca1b48d38f393a36979e5e452c2dd48ad3f
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
It is well known that for some NICs, masking
interrupts results in delaying desc writebacks,
which breaks poll mode. This fix introduces an
"int-unmaskable" dpdk device flag to identify such
devices (typically Intel FVL). For such devices,
interrupts are masked by a call to
file_update(...,UNIX_FILE_UPDATE_DELETE) instead
of rte_eth_dev_rx_intr_disable (...)
Change-Id: Ifbc701aebe8572319b7aae19382bd683a47fc3cf
Type: fix
Fixes: 19ff0c3699342b512c03362b3815df684a661f49
Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
|
|
Change-Id: I6ababc99ecf559327a4370914580c98d32680175
Type: feature
Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
|
|
Type: refactor
This patch refactors the offload flags in vlib_buffer_t.
There are two main reasons behind this refactoring.
First, offload flags are insufficient to represent outer
and inner headers offloads. Second, room for these flags
in first cacheline of vlib_buffer_t is also limited.
This patch introduces a generic offload flag in first
cacheline. And detailed offload flags in 2nd cacheline
of the structure for performance optimization.
Change-Id: Icc363a142fb9208ec7113ab5bbfc8230181f6004
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Asking for TSO (TCP Segmentation Offload) on packets that are already
smaller than (headers + MSS) does not make sense and may not work
on some HW.
Fix to only set the TSO flag when a segmentation offload is
really required, i.e when packet is large enough.
Type: improvement
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Change-Id: I7830ae8474581c8e518fb4910f7863e10346bb62
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
|
|
Type: refactor
Change-Id: I077110e1a422722e20aa546a6f3224c06ab0cde5
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
When creating a VLAN sub-interface on a Fortville i40e DPDK VF,
the data plane does not work properly.
Enabling vlan filter offload overrides the VLAN strip offload setting to on.
The VLAN strip offload must be disabled for VPP VLAN sub-interfaces to work.
Ticket: https://jira.fd.io/browse/VPP-1933
Type: fix
Signed-off-by: Dimitrios Markou <dimitrios.markou@est.tech>
Change-Id: I02c6980e3b01870b69a9375f281125ad48477827
|
|
Type: fix
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: Ie328834159687cdb4314c37d36697f2fb9081fbd
|
|
This patch adds the RSS steering queues set interface, and it's
implementation in DPDK device:
/* Interface to set rss queues of the interface */
typedef clib_error_t *(vnet_interface_rss_queues_set_t)
(struct vnet_main_t * vnm, struct vnet_hw_interface_t * hi,
clib_bitmap_t *bitmap);
This patch also introduces a command line to set the RSS queues:
set interface rss queues <interface> <list <queue-list>>
To display the rss queues, use "show hardware-interfaces"
Below is the example to configure rss queues for interface Gig0:
vpp# set interface rss queues Gig0 list 0,2,4-7
vpp# show hardware-interfaces brief
Name Idx Link Hardware
VirtualFunctionEthernet18/1/0 1 down VirtualFunctionEthernet18/1/0
Link speed: unknown
RSS queues: 0 2 4 5 6 7
local0 0 down local0
Link speed: unknown
vpp#
Users can also configure the rss queues on a dpdk interface in
startup.conf:
dpdk {
dev 0000:18:01.0 {
rss-queues 0,2,5-7
}
}
Type: feature
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: I1835595a1c54016a84eabee9fd62ce137935385d
|
|
Type: fix
Signed-off-by: jiangxiaoming <jiangxiaoming@outlook.com>
Change-Id: I87c6f423ea8fdd9fb764693055eb1509f994d6f1
|
|
This introduces a txq structure mirroring the rxq structure.
This fixes the case when #txq > #rxq, because lock must be per txq.
Type: fix
Fixes: dfb19cabe20ccf1cbd1aa714f493ccd322839b91
Change-Id: Ic1bce64d2b08b9a98c8242a1ba1bfcdbda322bec
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: improvement
Change-Id: I3defde103ab245404de42d2be7abcb2c43d49a60
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
Change-Id: Iebf77a63c0c19b130a3fbd26b5293304a9fed4c1
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
i2c follows its only use case - the original 82599 driver - into
extras/deprecated.
cj is/was an emergency debug tool unused in several years. Move to
extras/deprecated/vlib
Type: refactor
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: Ib55b65373f62630db295c562974bd8f2456c3107
|
|
Not in functional state for a long time ...
Type: refactor
Change-Id: I2cc1525a6d49518cbc94faf6afbf0d2d0d515f56
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
n_retry was never decremented and so never enforced.
Type: fix
Change-Id: I71d60a72c156286f7e5b82b1c77a723361317c69
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: feature
Add a callback to install or remove an additional MAC address on
a DPDK-managed device. Note that some PMDs don't have support for
this so YMMV.
Change-Id: I7b0cb3fb0af0d66fbdb7b894a712897f889520a5
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Too many prefetches within loop unrollings induce bottleneck and
performance degradation on some CPUs which have less cache line fill
buffers, e.g, Arm Cortex-A72.
Apply dual loop unrolling and tune prefetches manually to remove
hot-spot with prefetch instructions, to get throughput improvement.
It brings about 1% throughput improvement and saves 8% clocks with
the target node on Cortex-A72.
Type: feature
Change-Id: If3a64a04a77e90cd0240bc4d1186dbb09dac7df0
Signed-off-by: Lijian Zhang <Lijian.Zhang@arm.com>
|
|
Type: feature
Change-Id: I16b8cdf0b6af6715a5f01ad84365a8c8a1b76237
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: feature
You can enable tso in starup.conf like this:
dev 0000:86:00.0{
tso on
}
TSO is disabled by default.
Change-Id: Ifdbaf5322f768c384aa54e532d7bf45e810ca01c
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
|
|
sizeof(rte_mbuf) is 128 byte but 2* CLIB_CACHE_LINE_BYTES
is 256 byte for ThunderX/OCTEONTx targets.
Type: fix
Change-Id: If6893b168cf1c55c44bf4669a888ce858f2ef487
Signed-off-by: Nitin Saxena <nsaxena@marvell.com>
|
|
.. and remove helper stat struct for keeping last cleared stats.
This is not needed anymore as dpdk lib provides rte_eth_dev_reset().
Change-Id: I78076e689aac7ca70836ce688dfa8e704f64cd84
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Change-Id: I421192e1921d4c9c5486a6dcca745582aebf4e3e
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Change-Id: I0e28d059143fb7489d27a10c5b4a152d0d7dfb1f
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Moved code to the ethernet input node, and the interface output
path(s). Since we no longer skip ethernet-input, there's no reason
for device drivers to know anything about pcap rx tracing, etc.
Change-Id: I08d32fb1b90cbee1bd4f609837d533e047b36fa4
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
HQoS requires fixes to work with dpdk 19.02 so code is disabled and
pending deprecation unless active maintainer is found.
Change-Id: I3569c4287b6dfdd2c29e02375eb53bf01fa6ae84
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
This patch introduces following changes:
- deprecated free lists which are not used and not compatible
with external buffer managers (i.e. DPDK)
- introduces native support for per-numa buffer pools
- significantly improves performance of buffer alloc and free
Change-Id: I4a8e723ae47056717afd6cac0efe87cb731b5be7
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I998658ad7860b23425444e218ce2e1ec655b885a
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Id4f37f5d4a03160572954a416efa1ef9b3d79ad1
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
This is first part of addition of atomic macros with only macros for
__sync builtins.
- Based on earlier patch by Damjan (https://gerrit.fd.io/r/#/c/10729/)
Additionally
- clib_atomic_release macro added and used in the absence
of any memory barrier.
- clib_atomic_bool_cmp_and_swap added
Change-Id: Ie4e48c1e184a652018d1d0d87c4be80ddd180a3b
Original-patch-by: Damjan Marion <damarion@cisco.com>
Signed-off-by: Sirshak Das <sirshak.das@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Ola Liljedahl <ola.liljedahl@arm.com>
Reviewed-by: Steve Capper <steve.capper@arm.com>
|
|
Change-Id: If74acb0168bed2201d2a8b47bf3f860540d1574b
Signed-off-by: Khers <s3m2e1.6star@gmail.com>
|
|
also some moving of l2 headers to reduce dependencies
Change-Id: I7a700a411a91451ef13fd65f9c90de2432b793bb
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I1f54b994425c58776e1445c8d9fe142e7a644d3d
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
This significantly reduces need for
...
in multiarch code. Simply constructor macros will jost create static unused
entry if CLIB_MARCH_VARIANT is defined and that will be optimized out by
compiler.
Change-Id: I17d1c4ac0c903adcfadaa4a07de1b854c7ab14ac
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I39f87ca161c891fb22462a23188982fef7c3243f
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Prior to the change, dpdk plugin assumes xd->device_index is
used both as index for internal dpdk_main->devices array
and DPDK port index to call into DPDK APIs.
However, when running on top of Failsafe PMDs,
DPDK port index range may no longer be contiguous (as noted:
http://dpdk.org/ml/archives/dev/2018-March/092375.html
for related changes in DPDK). Because this, dpdk plugin can
no longer iterate through all available DPDK ports
with a for 0->rte_eth_dev_count() loop and the assumption of
device_index no longer holds.
This is part of initial effort to enable vpp running over
dpdk on failsafe PMD in Microsoft Azure(3/4).
Change-Id: I416fd80f2d40e12e139f8f3492814da98343eae7
Signed-off-by: Rui Cai <rucai@microsoft.com>
|
|
Change-Id: Ibab5e27277f618ceb2d543b9d6a1a5f191e7d1db
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Should cost at most 1 clock per frame when not enabled.
Add "pcap rx trace..." debug CLI, refactored "pcap tx trace" debug CLI
to avoid duplicating code.
Change-Id: I19ac75d1cf94a6a24c98facbf0753381d37963ea
Signed-off-by: Dave Barach <dbarach@cisco.com>
|
|
Change-Id: Ib3fcc3ceb7f315389bcdecbb7d9632540a5dd6ba
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Ibea4a96bdec5e368301a03d8b11a0712fa0265e0
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I921465ea64b59d42674cc8f19069ed04e3b25026
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
Change-Id: I3669068f694614f8555b33bf0b703c41e45363ef
Signed-off-by: Florin Coras <fcoras@cisco.com>
|